Yosemite, PSE12 and printing

As a photographer I use my iMac for editing and printing using Photoshop Elements 12. Since upgrading to Yosemite I cannot switch the paper on my Epson DX4000 printer to glossy. How do I do that? Thanks John
Hardware Overview:
Model Name: iMac
Model Identifier: iMa
Hardware Overvi

Thanks Alfred- but sill no joy.
Reinstalled printer as you suggested using System Settings etc
Test print page OK
Works with Safari OK
But loading PSE12 and trying to print a glossy photo- still does not work. Yosemite OS it does not give me the options in Epson DX4000 Printer Setup to change the paper to glossy, matt ,plain. etc. as it did on Mavericks OS in which it worked perfectly. Any help appreciated! Cheers
John
Latest updates have been applied by the system
OS X 10.10.1 on 19 Nov
Epson printer update 2.19 on 15 Nov.

Similar Messages

Problems printing with PSE12 and Canon Pro9000 MII

There seems to be a problem with PSE 12 and the print function. Using my Canon Pro9000-Mark II the size is off. Set to 8 x 10 photo paper in either landscape or portrait, PSE will print it to what looks like a 16 by 20 print, even though all setting are for an 8 x 10. Another problem is that even though the 9000 is set as my default printer, PSE always returns to my Epson 1400.
To further complicate this matter, if I use the Automation tool and select Canon Print Studio Pro, the 9000 prints perfectly with PSE12.
Can anyone offer any suggestions?.

Usually posted problems with the Pro9000 are poor colour matching ones, I don't recall a sizing problem before.
Have you checked all the places where size may be set, both in the PSE Print Dialogs (check paper size and print size, and under more options 'custom print size) and in the standard printer driver ?
Out of interest why would you NOT want to use Canon Print Studio Pro plug-in ? I thought this was Canon's recommended printing work flow.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Cannot print EPSON Stylus Photo 1410 after updating to Yosemite and printer update'

After updating Mac in Yosemite OSX and updating epson printer software I cannot print anymore
tried removing epson printer folder from my library and re-installing but still nothing happen...

This makes my printer works again...
I remove printer folder from library and download this link'
Epson Printer Drivers v2.18 for OS X
Install the driver
and it works'

Word for mac won't show doc in print preview and prints blank page.

I have a document from layoutready.com that I have been editing and it is a .doc file originally and won't show up. I've tried saving it as .docx and still nothing. Also, when I create a new document and put in a shape or a text box, it won't show up in print preview or print either. Excel is fine. I can insert a shape onto a worksheet and previews and prints fine. I have sent a document to a friend to test and when they open it in their word (on a pc) it previews and prints fine. I called stupid %*&#@ Microsoft and they want me to sign up for $99 Office 365 to get support. Ergh. Should I try to re-install Word? Oh, and I also updated to Yosemite last night.

Then post your question on the Microsoft Mac forums since it's their software you'r having problems with. These forums are for troubleshooting Apple products
http://answers.microsoft.com/en-us/mac

Image looks great in PS- when I go to print it looks grainy in printer preview dialog box and prints blurry. Why?

Image looks great in PS- when I go to print, it looks grainy in printer preview dialog box and prints blurry. Why is this happening?

PS CC, Yosemite, Epson 3880 (called espson to make sure it wasn't something with that), saved as a tiff/psdjpg- all files behave the same way. When I open the raw file- and only crop the image- it behaves this way now- with grain and blur when printing. No other files do this in the same shoot. I worked on this image- could something have gotten corrupted along the way such that now even opening the raw file creates this problem. SInce upgrading my computer - a window pops up when I open PS that says I need to update my graphics card?? for 3D- I'm not using 3D- so I don't know if that means anything. I have to leave for about an hour- but greatly appreciate any feedback. I will be in touch. Thank you.

Print size mismatch between Photoshop and printer

I am using Photoshop CC on a Mac Maverick and now Yosemite and have a problem in that Photoshop print settings does not match the paper size I have selected. Photoshop has 15.722 in x 20.361 in while I have 8.5 x 11in selected. If I select a different printer the results are the same. If I save as a PDF and print from preview it prints fine. Any thoughts?

I have since figured this out... you have to drag the composition over from Pr to Ae as illustrated here: (It then becomes "dynamic" )
http://i216.photobucket.com/albums/cc53/zymurgy_bucket/dont-loose-film-fx-after-effects_zp s33d22a32.jpg

After Yosemite upgrade, Kodak printer won't print

After upgrading to Yosemite, my Kodak Printer ESP5 all-in-one, will not print. I get an error message"filter failed"

I found I had to go into Terminal and type a couple of lines as recommended by Kodak. My ESP7 works fine now.

HELP to Open and Print automatic a REPORT

Hello, I'm a Portuguese Developer, and i've a challenge, that is, i want to open REPORT by FORMS in RDF format and i want to open and print automatic way, i do not want to open, and then have to go print button to pint them.
I want to open by FORM way and print automatic and close imediatly.
HEP ME PLEASE!
Thank you

Aslam o Alikum (Hi)
Ofcourse you can do this by specifing system parameters like DESTYPE=Printer and DESNAME=PrinterName
Replace PrinterName with you printer name
See System Parameters in Reports Under Data Model

Is there a way to create a year at a glance with detail and print?

Is there a way to create a year at a glance with detail and print?

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Unable to schedule a report to email and print

I have been working on a task to both print and email a report to recipients whose email addresses are obtained at runtime. So far I am able to email the report as a PDF attachment, however, I am not able to get the report to print. I have three thoughts as to why the report is not printing.
1. The printer is in a subdomain under the domain where InfoView and the Enterprise server reside.
2. It is not possible to schedule a report for both an SMTP and print destination simultaneously.
3. The format is causing an issue in printing - the SDK API states "Printer is a report format specific destination and can only be used when the report object is a Crystal Report."
I have looked at the scheduled report in InfoView and can see that the print settings I am passing are correctly set for the scheduled instance. Does anyone know if there is a problem with trying to schedule printing and email at the same time, or if the report format must be .rpt?
Below is my code. Thank you for your time.
String query = "Select SI_ID, SI_NAME, SI_PROCESSINFO, SI_SCHEDULEINFO, SI_SCHEDULE_STATUS From CI_INFOOBJECTS Where SI_ID=" + reportId;
        IInfoObjects results = null;
        ISchedulingInfo schedulingInfo = null;
        try {
           results = iStore.query(query);
        } catch( SDKException sdke ){
           logger.error(sdke);
        if( !results.isEmpty() ){
            // get the actual report object from collection and set scheduling information
            IInfoObject report = (IInfoObject)results.get(0);
            schedulingInfo = report.getSchedulingInfo();
            schedulingInfo.setType(CeScheduleType.ONCE);
            schedulingInfo.setRightNow(true);
            schedulingInfo.setRetriesAllowed(3);
            try {
                Set<String> keys = destinations.keySet();
                Iterator i = keys.iterator();
                while( i.hasNext() ){
                    String dest = (String) i.next();
                    if(dest.equals(CrystalDestinations.EMAIL)){
                        // get the destination object and set it to SMTP plugin
                        List emailAddress = destinations.get(CrystalDestinations.EMAIL);
                        IDestination destinationObject = schedulingInfo.getDestination();
                        destinationObject.setName("CrystalEnterprise.SMTP");
                        IDestinationPlugin smtpPlugin = (IDestinationPlugin) iStore.query("SELECT * FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 29 AND SI_NAME='CrystalEnterprise.SMTP'").get(0);
                        ISMTPOptions smtpOptions = (ISMTPOptions) smtpPlugin.getScheduleOptions();
                        smtpOptions.setDomainName( emailDomain );
                        smtpOptions.setServerName( smtpHost );
                        smtpOptions.setSMTPUserName( smtpUser );
                        smtpOptions.setSMTPPassword( smtpPass );
                        smtpOptions.setSubject( "Email for report " + report.getTitle() );
                        smtpOptions.setMessage( "This is the message body" );
                        smtpOptions.setSenderAddress( smtpUser + "@cdrh.fda.gov" );
                        smtpOptions.setSMTPAuthenticationType( ISMTPOptions.CeSMTPAuthentication.LOGIN );
                        for(int j = 0; j < emailAddress.size(); j++ ){
                            smtpOptions.getToAddresses().add( emailAddress.get(j) );
                        destinationObject.setFromPlugin( smtpPlugin );
} else if ( dest.equals(CrystalDestinations.PRINT) ){
                        List printers = destinations.get( CrystalDestinations.PRINT );
                        IReportPrinterOptions printerOptions = ((IReport)report).getReportPrinterOptions();
                        printerOptions.setCopies(1);
                        printerOptions.setEnabled(false);
                        printerOptions.setPrinterName( (String)printers.get(0) );
                        printerOptions.setPageLayout(IReportPrinterOptions.CeReportLayout.USE_SPECIFIED_PRINTER_SETTING);
                List reportPrompts = ((IReport)report).getReportParameters();
                for(int j = 0; j < reportPrompts.size(); j++){
                    IReportParameter prompt = (IReportParameter) reportPrompts.get(j);
                    if(prompt.getParameterName().equals(mdrParamName)){
                      IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                      v.setValue(reportParameters.get(mdrParamName));
                    } else if(prompt.getParameterName().equals(addressParamName)){
                        IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                        v.setValue(reportParameters.get(addressParamName));
                IReportFormatOptions format = ( (IReport) report).getReportFormatOptions();
                format.setFormat(IReportFormatOptions.CeReportFormat.PDF);
                iStore.schedule( results );

Hi Jason,
Based on your code, I could not tell if you were scheduling a Crystal Report or a WebI document.
Regardless, what I would suggest is you try scheduling the report/document on InfoView.
Once you schedule it on InfoView, you can retrieve the instance on Query Builder (or through code) and compare the properties that are being set through InfoView and the one you set through your code.
This should indicate if you are missing some properies or have set some properties incorrectly.
Hope this helps.
Regards,
Dan

Print from ipad if i connect a usb connector to my ipad can i connect my printer to it and print??as im thinking of buying the new ipad for work but i must be able toprint

hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.

If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
Activate AirPrint in Mac OS X;
http://netputing.com/airprintactivator/
Add AirPrint to Windows;
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

Open and print pdf file through form 6i

I want to run and print a pdf file through the form. Any suggestion please......
thanks in advance....
ifti

you could try using the DDE package to open the file
and then print from the actual file location using a host command.

Open and print a PDF from web

I created an application to open a PDF and print it directly on the default printer. This application works if the file is a Windows' network address (example: \\192.168.0.4). But if I put an internet address (URL), the Acrobat Reader presents the following error:
There was an error opening this document. The syntax of the name of the file, folder or name of the volume is incorrect.
The command I'm using is:
"C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe\" /t http: \\192.168.0.4:8082\test\file.pdf \\192.168.0.15\HPLaserJet
There are print directly as a URL?

>
horatiusx wrote:
> Hi all gurus.
>
> I developed a Web Dynpro application to let the users create their own sales orders.
>
> Now I need to let them print the orders when they need to. Searching on the documentation I have, I've never found anything about crating a pdf print from the WD Application.
>
> There must be a way, because I managed to do that even with the very old ITS (the one in which you had to write HTML code...) but i cannot find how.
>
> Can anyone help me please? Even a tutorial would be very appreciated.
>
> Thank you in advance...
You need a Smartform, SAPScript, or AdobeForm to be defined for your output. Define an action/method for print, then pass the data to your Form. SmartForms are not bad, as SmartForms generate a Function Module, and are easy to call.
Call the SmartForm Function with PDF output = 'X' (parameter within Output Control I think). Then pass the PDF_DATA[] table (type = TAB_SOLIX) to a new window output .
Don't have the code in front of me, but have done it several times.
Adobe Forms is another good option, but you need Adobe Server, and generally I have found ADOBE to be SLOOOOOWWWWW. I think Steve Jobs might have been on to something with ADOBE -- just my opinion.
And of course, it can be done with SAPSCript, but I would need a whole blog on how to do that.....

Pages - Share and Print - Email document issue

I ran into an issue today on my iPad2 and wanted to see if it was just me or can anyone reproduce this error. If it turns out to be just me, someone help me undertand how to get around the issue. If it is more widespread, where do I report this so it can be resolved in an future release?
Here is what happened.
I received a Word document via e-mail. When I opened it in e-mail and chose to "open with Pages" it worked fine. Imported into Pages sans the font (which I've come to expect). Then I edited the document (it was a quick survey I was taking) and then was ready to send it back to the person who sent it to me. I chose the tools icon, selected "Share and Print" then selected "Email Document" and then chose Word as the format. It converted it and attached the file in a blank e-mail ready for me to address and send.
Well, I wasn't ready to send just yet. So I clicked on "Cancel" and then "Save Draft" which it did successfully. Then I went into email, edited my "Draft" in my Drafts folder, addressed it, etc. and sent it on its merry way. Well, guess what? The file did not come through on the e-mail. Just my text.
I tried "copy and paste" of the file after saving as a draft and it only sent the "picture" of the file ICON and not the file itself. I tried multiple times saving it as a draft and then sending and it never worked.
If I send from within Pages right at the time after "Email Document" is selected, it works every time. It seems to only be when I save the email as a draft from within Pages that it will not send the attachment or something happens to the attachment. I did notice also, that if I edited any "text" from that draft and then saved the draft again, all my edited text wouldn't save either. So any "Draft" saved from Pages I couldn't edit regardless of any attempt.
Draft saving and editing within the email application works as expected.
NOTE: Just before submitting this discussion, I tried the above on my wife's iPad2 with the same results. Anything "saved as a draft" from Pages in e-mail, will not send the attachment. Anything sent directly from within Pages and not saving it as a draft, will send the attachment.
There are times I would like to save it as an attachement, should this work? Thanks everyone!
Edward

I am only vaguely familiar with iWork.com. I know it is a cloud based way to share documents with others, but this is what the send to option does when you work with Pages, Numbers or Keynote on the iPad. I would assume that the function performs the same way in iWork.com. - but it is only an assumption.
"Send to" is the command that will let you send that file to your computer the next time you sync with iTunes. It is the way the iPad transfers the file to your computer - the iPad method of file sharing. You can sync files back and forth from iPad to computer with file sharing as long as the app on the iPad is compatible with a similar application on your computer. In your case iWorks apps on both the iPad and your Mac.
This article will explain it in great detail for you.
http://support.apple.com/kb/HT4088

To upload a RTF and a PDF file to SAP R/3 and print the same through SAP

Hi,
I have a requirement to upload a PDF file and a RTF file to SAP R/3 and print the same.
I wrote the following code for uploading a RTF file to SAP R/3 and print the same. However, the problem is , the formatting present in the RTF document( bold/italics..etc) is not being reflected when I do the 'print-preview' after the executing the code below :
report z_test_upload .
data: begin of itab occurs 0,
         rec type string,
      end of itab.
data: options like itcpo.
data: filename type string,
      count type i.
data: filetype(10) type c value 'ASC'.
DATA: HEADER LIKE THEAD    OCCURS   0 WITH HEADER LINE.
DATA: NEWHEADER LIKE THEAD    OCCURS   0 WITH HEADER LINE.
DATA: ITFLINE LIKE TLINE    OCCURS   0 WITH HEADER LINE.
DATA: RTFLINE LIKE HELP_STFA OCCURS   0 WITH HEADER LINE.
DATA:   string_len TYPE i,
        n1 TYPE i.
selection-screen begin of block b1.
parameter: p_file1(128) default 'C:\test_itf.rtf'.
selection-screen end of block b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
       IMPORTING
            file_name = p_file1.
start-of-selection.
move p_file1 to filename.
call function 'GUI_UPLOAD'
     EXPORTING
          filename                = filename
          filetype                = filetype
     TABLES
          data_tab                = itab
     EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          others                  = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
loop at itab.
string_len = strlen( itab-rec ).
n1 = string_len DIV 134.
ADD 1 TO n1.
DO n1 TIMES.
    rtfline-line = itab-rec.
    APPEND rtfline.
    SHIFT itab-rec BY 134 PLACES.
ENDDO.
endloop.
HEADER-TDSTYLE = 'S_DOCUS1'.
HEADER-TDFORM = 'S_DOCU_SHOW'.
header-tdspras = 'E'.
CALL FUNCTION 'CONVERT_TEXT'
EXPORTING
CODEPAGE               = '0000'
    DIRECTION              = 'IMPORT'
    FORMAT_TYPE            = 'RTF'
   FORMATWIDTH            = 72
    HEADER                 = header
    SSHEET                 = 'WINHELP.DOT'
    WITH_TAB               = 'X'
    WORD_LANGU             = SY-LANGU
    TABLETYPE              = 'ASC'
TAB_SUBSTITUTE         = 'X09 '
LF_SUBSTITUTE          = ' '
REPLACE_SYMBOLS        = 'X'
REPLACE_SAPCHARS       = 'X'
MASK_BRACKETS          = 'X'
IMPORTING
    NEWHEADER              = NEWHEADER
WITH_TAB_E             =
FORMATWIDTH_E          =
TABLES
    FOREIGN                = RTFLINE
    ITF_LINES              = ITFLINE.
LINKS_TO_CONVERT       =
if sy-subrc <> 0.
endif.
CALL FUNCTION 'PRINT_TEXT_ITF'
EXPORTING
     HEADER        = newheader
     OPTIONS       = options
IMPORTING
RESULT        =
TABLES
    LINES         = itfline.
if sy-subrc <> 0.
endif.
Any hints or suggestions to solve this problem will be highly appreciated.
Thanks,
Avra

Hi Vishwas,
Check out the thread [Efficient way of saving documents uploaded|Re: Efficient way of saving documents uploaded by users; and check the blog by Raja Thangamani.
Also check the thread [Export Images through Function Modules   |Export Images through Function Modules;.
Hope it helps you.

Yosemite, PSE12 and printing

Similar Messages

Maybe you are looking for