Yosemite re-installation not possible!!!

My Mac crashed because of a driver installation.
My boot HD is not starting anymore. It just shows a grey crossed circle after 1 minute.
I tried to re-install it via recovery partition. That doesn't work. The installation got stuck.
I thought about a clean new installation and migration from my HD later on.
Then I tried to download Yosemite again! When I'm trying to do so I'm always getting:
We could not complete your purchase.
OS X v10.10 is already installed on this computer. Use the Updates page to install the 10.10 update or if you would like to download the full OS X installer click Continue.
“Learn more” “OK”
First there is no “Continue” and second there is no way to download it again.
Third - when you click on "Learn more" you will see a page: OS X Mavericks: System Requirements
MAVERICKS???
Any help is much appreciated!!! I really need a new download to make a clean installation.
My Mac crashed and I am not able to boot from my main HD.

How to Make a Bootable Mac OS X Yosemite 10.10 USB Thumb Drive
"Search it on YOUTUBE " watch it and DIY...
YOUTUBE ROCKS

Similar Messages

  • Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

    Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

    Moved thread to Android development.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Downloaded Yosemite but installation not finishing. Now Mac is frozen. Any idea how to roll back to earlier version?

    Downloaded Yosemite but installation not finishing. Now Mac is frozen. Any idea how to roll back to earlier version?

    i have the same issue, really not happy, if i get an answer i will share with you.mark

  • Acrobat 9 (from CS4) asking for serial again after OS-upgrade to Yosemite. New installation not possible

    Hi all, I feel quite desperate at the moment.
    My old CS4 ran perfectly. Now I upgraded my system to Mac OS Yosemite and the trouble began.
    First, Acrobat no longer ran properly and asked me to start e.g. Photoshop. What I did. Photoshop and all other CS4 applications no more worked beause of some license issues. I finally fixed this by means of Adobe's tool. I had to re-enter the CS4-Serial and Photoshop, Indesign etc. worked again. Not did Acrobat Pro 9. This application asked me to re-enter the serial. What I did. The serial was not accepted. I tried a thousand times. Then I uninstalled Acrobad Pro 9 and tried to re-install this application from the original CD. This does not work: The setup screen of my CS4 "Design Premium" stopped three times with the grey screen reading "Preparing to install". Other attempts ended up in error messages about JAVA etc. - The DVD simply does not work anymore with the new OS.
    Can anyone tell me what to do? My search over Adobe's support pages never led me to a valid contact form or anything of use for this problem. 
    Thank you in Advance

    A point worth pointing out is that, although CS versions may have included installers for Acrobat they were not for direct use; often (who can remember CS4?) you MUST use the CS installer, which uses the Acrobat installer in a special way; CS licensing is not like Acrobat licensing and Acrobat does not take a CS number. Nevertheless, I'd still advise a restore and not upgrading your OS without being prepared to upgrade everything else. (And it's still very early, this is a very brave/risky thing even for CC licensees).

  • Adobe Installation not possible

    I recently could not start Adobe Flash CC any more. Icon started bouncing the stopped and nothing happened.
    After several attempts I removed Flash from my computer and tried to install a new copy.
    Now the Installer won't work. It keeps saying 'Installer is being initiated' together with the blue bar. Once the bar reaches the full length it stays as is for a some 20 seconds and then the installer is gone. This happens with any version of Adobe Flash Installer I tried. CS6 to CC.
    No clue what this is after using Mac now for 30 years.
    Has anyone a clue how I could solve this issue?
    Thanks

    30 years, huh? Me too... have you restarted your Mac? (I know, maybe a dumb question)
    Verify your current setup - OSX version etc.
    What may have changed just prior to your travails? any software added, updated, upgraded?
    have you visited the Adobe forums?
    ÇÇÇ

  • Installation not possible on company network!

    Well as of right now I can not use Adobe CC.
    Our firewalls are blocking something so my Cloud control panel is unable to connect.
    I have asked our IT department if they can fix it so I can install creative cloud on my computer, but they refused and said we can't use it because it's a security risk with the external storage.
    Obviously you can choose not to use it at a user level. But that is not good enough. It has to be controlled at a network/firewall level, because they can't risk it if it's up to individual users to control this.
    I bought the subscription myself on behalf of my own department, it is not something I got through our IT department, and IT is currently not supporting it, so if I can't resolve this myself I have to cancel my subscription.
    I have talked to Adobes support to find out if the creative cloud storage can be blocked on a network/firewall level without blocking the entire application. I was hoping to get some information I could bring forward to our IT department. After chatting with 3 different people in the online chat support, I was reffered to their technical support phone line in denmark because this was too technical for them.
    The guy on the phone said it wasn't possible to block cloud filesync access without blocking the whole thing. Maybe he didn't understand it correctly or didn't have enough knowledge, but what can you do when you've tried all options with support?
    I'm hoping someone else has information that suggests otherwise, and I would be more than happy to know so I can forward it to our IT department!
    Otherwise I have to cancel my subscription and go back to CS5.5 (annyoyingly CS5.5 doesn't support my new canon 6D raw files)

    Hi Markus,
    Please forward the ports and address to be added on company's network/firewall, it might help or might not. Here is the list:
    ccmdl.adobe.com:80
    swupmf.adobe.com:80
    swupdl.adobe.com:80
    https://na1mbls.licenses.adobe.com
    https://ims-na1.adobelogin.com
    https://adobeid-na1.services.adobe.com
    https://na1r.services.adobe.com
    http://activate.adobe.com
    https://activate.adobe.com
    http://adobe.activate.com
    https://adobe.activate.com
    ccmdls.adobe.com:443
    ims-na1.adobelogin.com:443
    na1r.services.adobe.com:443
    prod-rel-ffc-ccm.oobesaas.adobe.com:443
    lm.licenses.adobe.com:443
    www-du1.adobe.com
    Thanks!
    Ankit

  • AAMEE 3.1 Photoshop package - Installation not possible

    Hi,
    -successfully created a Photoshop CS6 package with AAMEE 3.1
    -starting the Adobe Photoshop CS6.msi with msiexec /i c:\temp\Adobe Photoshop CS6.msi /qn is starting the msi/setup
    -Photoshop is not installed
    - msi directly started - same proplem
    -Logfiles searched for errors - nor error found which tells me what's wrong
    -Package 7times new created
    -no idea what i can do now
    for any help thanks in advance!
    Best regards
    Stefan

    The command which you are using is correct but the path which you have mentioned in the command have some space in the folder name. So would recoomend try to add double codes in the path like "c:\temp\Adobe Photoshop CS6.msi".
    Here is the command which you can use to install the software silently. - msiexec /i "c:\temp\Adobe Photoshop CS6.msi" /qn
    or you can change the directory first in the command prompt and then enter the command : msiexec /i "Photoshop CS6.msi" /qn

  • Installation Problem InDesign CS6   installation not possible less I close the ShellExtLoader

    solution i found
    quit SugarSync
    You just needed to quit it ,
    install and restart Sugarsync.

    Trash the download and any bits it may have already installed, then download again. If you use any kind of AV software, disable it for the install.
    EDIT but before doing that, just restart your computer and see if that helps.

  • Encryption is not possible in this installation! - in "Create Secure Store"

    Hi,
    We are in the middle of upgrade and While doing UNICODE conversion of SRM5 system, During IMPORT, one of the phase is "Create Secure Store". UNICODE import gives ERROR in "Create Secure Store" phase.
    Below given is ERROR Detail:
    [root@fsp67001] /unicode/import_uc/sapinst_instdir/SRM05/LM/COPY/ORA/SYSTEM/CENTRAL/AS>
    >cat SecureStoreCreate.log
    SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    Usage:
    SecStoreFS status <standard>
    SecStoreFS exists <standard>
    SecStoreFS create <standard> -noenc
    SecStoreFS create <standard> -enc -p "<key phrase>" [-nostore]
    SecStoreFS insert <standard> <key> <value>
    SecStoreFS encrypt <standard> -p "<key phrase>" [-nostore]
    SecStoreFS updatep <standard> -p "<key phrase>" [-nostore]
    where <standard> is [-s <SID>] [-f <data filename> -k <key filename>]
    Encryption is not possible in this installation!
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Log Details:
    When you look at command which gets executed in background(Which is
    failing) is given below.
    /usr/java14_64/bin/java -
    classpath /unicode/import_uc/sapinst_instdir/SRM05/LM/COPY/ORA/SYSTEM/CENTRAL/AS/install/sharedlib/launcher.jar -Xmx256m -Xj9
    com.sap.engine.offline.OfflineToolStart
    com.sap.security.core.server.secstorefs.SecStoreFS /unicode/import_uc/sapinst_instdir/SRM05/LM/COPY/ORA/SYSTEM/CENTRAL/AS/install/lib/iaik_jce.jar:/unicode/import_uc/sapinst_instdir/SRM05/LM/COPY/ORA/SYSTEM/CENTRAL/AS/install/sharedlib/exception.jar:/unicode/import_uc/sapinst_instdir/SRM05/LM/COPY/ORA/SYSTEM/CENTRAL/AS/install/sharedlib/logging.jar:/unicode/import_uc/sapinst_instdir/SRM05/LM/COPY/ORA/SYSTEM/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar create -s RSP -
    f /sapmnt/RSP/global/security/data/SecStore.properties -
    k /sapmnt/RSP/global/security/data/SecStore.key -enc -p XXXXXX
    Request  If anybody in the forum has faced similar problem, pls respond back.
    Vijay

    Hi
    <b>Please go through the SAP OSS Notes, which will help -></b>
    Note 501710 - Error when accessing the "secure storage"
    Note 750779 - Safety and Security of User Mapping Data
    Note 1071472 - FileSystem SecureStore connection issues
    Note 914791 - SQL Command console does not work with automatic config
    Related Notes
    Note 520039 - Analysis report for "secure storage"
    Note 516835 - Error SECSTORE023 with secure storage
    Note 502422 - Long texts for error messages SECSTORE021 to SECSTORE031
    Note 501486 - Work process termination when using the "secure storage"
    Do let me know.
    Regards
    - Atul

  • I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your

    I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?

    Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?

  • After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe. Already reinstalled 3 times and always sa

    After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe.
    Already reinstalled 3 times and always says the same message.
    thank you

    Only two had virus on windows XP this week and wiped them with Avast. The itunes asked me to install the update, and so I did. but it always gives me that message.

  • Dialog Instance installation error - rdisp/msserv_no not possible

    Dear All,
    While trying to install a DI I am getting the following error:
    An error occurred while processing service SAP CRM 5.0 Support Release 3 > Software Life-Cycle Options > Application Server > MS SQL Server > Dialog Instance( Last error reported by the step :Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..). You may now
    choose Retry to repeat the current step.
    choose View Log to get more information about the error.
    stop the task and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/CRM05/LM/AS/MSS/DI.
    The log says the following:
    INFO 2009-07-20 05:21:54.298
    Disconnect from message server (UT1VC7P01/3901) succeeded.
    ERROR 2009-07-20 05:21:54.298
    CJS-00030  Assertion failed: in getMsPort() rdisp/msserv_no not possible. You need a newer message server.
    ERROR 2009-07-20 05:21:54.376
    MUT-03025  Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..
    ERROR 2009-07-20 05:21:54.470
    FCO-00011  The step getMsPort with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_checkMsgServer|ind|ind|ind|ind|2|0|getMsPort was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..).
    Please share your views on what could be missing here.
    Thanks a lot for your help and time,
    Shival

    Hi,
    Interestingly enough the installation went through by restoring the original kernel files, i.e. kernel fils as soon as the CI installation was completed.
    I have upgraded kernel on CI now and am facing another issue of "Dialong Queue info Unavailable".
    Not sure if I should open up a new thread for it.
    Please let me know your views/ideas on the above.
    Thanks a lot for your help and time,
    Shival

  • HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.8
    Mac download (.dmg file) click here DNG Converter 8.8
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Homogeneous System Copy - Installation of Database Instance not possible...

    I try to create a SAP NetWeaver 7.0 SR3 Portal based on a homogeneous SAP System Copy. Therefore I already installed in a first step (first option within SAPINST for installing a target system of a system copy) the Central Services Instance successfully on a machine. In the next step I'd like to create the Database Instance with SAPINST but I cannot choose the DB instance that I already created based on a restore within the new DB server (MS SQL 2008 Cluster installation). I can only choose the local machine for using a DB instance but there is no MS SQL Server installed!
    Do I have to start SAPINST on the DB server itself which is not possible/allowed (due to operating/organization reasons)?
    Is there any SAPINST parameter which I have to use for telling SAPINST that the DB is located on a different server?!?
    The documentation just says:
    The target system is installed using the exports from the source system.
    Choose the installation services exactly in the order they appear. For more information, see the MS SQL Server installation guide for your SAP system at http://service.sap.com/installnw70.
    On the SAPinst screen SAP SystemDatabase make sure to select Homogeneous System Copy (MS SQL Server-specific: Detach/Attach or Backup).
    Thanks for supporting and Regards,
    Claudio Schmidt

    OK, SAP Note 1076022 says:
    SAP installation packages on SAP Service Marketplace
    On March 27, 2008, SAP released the Netweaver installation package SR3, which supports SQL Server 2008 (R2). Note 1152240 discusses the details and lists some restrictions. Make sure you carefully read Note 1152240 and use a recent enough installation master DVD.
    SAP Note 1152240 says:
    If you want to perform a system copy of an SAP system that is based on SAP NetWeaver 7.0 SR3 on SQL Server 2008 (R2), you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace (SMP). Instead, you have to do the following:
    - Patch your runtime libraries as described in SAP note 684106
    - Use a modified Installation Master DVD. For more information, see section "IV Creating a modified Installation Master DVD".
    - Use a modified Kernel DVD. For more information about how to create a modified kernel DVD, see SAP note 1480785.
    What problem is fixed by using the modified Installation Master DVD? Is it possible to install the DB part on a server apart of the local machine where SAPINST is run (my initial question/problem I want do resolve)?
    Regards,
    Claudio

  • Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

    hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

    BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
    Mylenium

Maybe you are looking for

  • Do I need to downgrade to Mountain Lion?

    Hello, I just upgraded to OS X Mavericks and was ready to upgrade my VMware Fusion 3 to VMware Fusion 6 when I noticed the warning that I needed to shut down VMware before upgrading. I am certain that my VMware was only suspended, not shut down. I am

  • Video Out Struggle

    Hey, I read all of the display/out threads and I can't solve my problem. I bought the S/video out cable for my new ibook g4, and it's hooked up. TV -> S/video -> apple svideo hookup -> comp. But i'm getting no sound or signal. My question is, what do

  • Start an outside application from the database

    Hello, is there a way to start an outside application from within the database and pass some field values as arguments? Thanks in advance, Milos

  • The program shany ip surrvilance Playback.exe version 4.0.7.3 stopped interacting with Windows and was closed

    in windows server 2008 r2 running shany ip surveillance when i want to playback from record file windows encounter error:The program shany ip surrvilance Playback.exe version 4.0.7.3 stopped interacting with Windows and was closed

  • How t o automatically create an eBook cover in Photoshop?

    I have a website that is focused on Internet marketing strategy and I want to create a product including an eBook cover for a prodject. I have been told there is an automatic program or sequence of commands that can dothis for me. Is this true? if so