Yosemite slow load and display changes at logon screen

Hi
I updated my Macbook Pro to Yosemite; since then at logon the display scale is bigger than my default, but once logged on the display changes smaller to my default.
At the logon I find that it takes longer to load after entering password etc; status bar rolls and taking about 30 seconds (instead of the 5 seconds previously in Mavericks).
Also find that after logon, it takes a few minutes to connect to the internet and be ready to use.
This never happened previously, was instant after logon could go straight into email or safari and work.
Is others experiencing this and what can I do to improve this?
Thanks

Similar Messages

How to load and display the external flv video files in dynamicly and the how to control the flv fil

How to load and display the external flv video files in dynamicly using AS 3.0
and How to control the flv file add the play paus button and add seekbar.
I have using to load the flv file following code
var flvPlaceHolder1:MovieClip = new MovieClip();
var vid1:Video = new Video(734, 408);
flvPlaceHolder1.addChild(vid1);
addChild(flvPlaceHolder1);
flvPlaceHolder1.x = 1059;
flvPlaceHolder1.y = 152;
var nc1:NetConnection = new NetConnection();
nc1.connect(null);
var ns1:NetStream = new NetStream(nc1);
vid1.attachNetStream(ns1);
var listener1:Object = new Object();
listener1.onMetaData = function(evt:Object):void {};
ns1.client = listener1;
ns1.play("GV-1600 TURNING.flv");
ns1.addEventListener(NetStatusEvent.NET_STATUS, statusChanged1);
function statusChanged1(ns1:NetStatusEvent):void
         trace(ns1.info.code);
        if (ns1.info.code == 'NetStream.Buffer.Empty')
             trace('the video has ended');
             removeChild(flvPlaceHolder1);
             //trace('removeChild');
            gotoAndPlay(1786);
then how to add the play,paus ,full screen button    and   seekbar,volumebar.

I have to Create the flash presentation for our company product
In this presentation the left side the text animation are displayed then right side the our product video is displayed.
In this presentation i need the following option :
1, The first product video and animation is finished then the next product is played
2, then the video displayed (size width and height 400x300) , I click this video to increase the size(ex:1000x700)
3, then the playing video i control it play, stop, paus button and volume bar, seek bar.
4, then this presentation is displayed on 42 inches LCD TV so this full presentation is run full screen.
I have finished first two steps 1 and 2
the following are the screen short and code:-
code :-
var count=0;
var flvPlaceHolder2:MovieClip = new MovieClip();
var vid2:Video = new Video(734, 408);
flvPlaceHolder2.addChild(vid2);
addChild(flvPlaceHolder2);
flvPlaceHolder2.x = 1059;
flvPlaceHolder2.y = 152;
var nc2:NetConnection = new NetConnection();
nc2.connect(null);
var ns2:NetStream = new NetStream(nc2);
vid2.attachNetStream(ns2);
var listener2:Object = new Object();
listener2.onMetaData = function(evt:Object):void {};
ns2.client = listener2;
ns2.play("GS-4000.flv");
this.addEventListener(Event.ENTER_FRAME, BtnFadeIn2);
function BtnFadeIn2(event:Event):void
    if (this.currentFrame == 387)
        /*flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        trace('Screen size is changed');*/
        if(count==0)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        count++;
ns2.addEventListener(NetStatusEvent.NET_STATUS, statusChanged2);
function statusChanged2(ns2:NetStatusEvent):void
    trace(ns2.info.code);
    if (ns2.info.code == 'NetStream.Buffer.Empty')
            trace('the video has ended');
             removeChild(flvPlaceHolder2);
             //trace('removeChild');
            gotoAndPlay(433);
flvPlaceHolder2.buttonMode=true;
flvPlaceHolder2.addEventListener(MouseEvent.CLICK,home2);
function home2(e:MouseEvent):void
    if(vid2.width==734 && vid2.height==408)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
    else
        flvPlaceHolder2.x = 1059;
        flvPlaceHolder2.y = 152;
        vid2.width=734;
        vid2.height=408;

PDF addresses not longer load and display PDF in Firefox and solutions suggest to other users with problem DON'T WORK (work fine in Chrome and Safari)

This is an ongoing problem with other users. When putting a PDF in address window of Firefox and clicking go to address FIREFOX WILL NOT LOAD AND DISPLAY THE PDF. This problem has come up in questions from other users on your site. NONE OF THE SUGGESTED SOLUTIONS WORK! (trying either the Firefox PDF viewer or the Acrobat viewer as default viewer)
I am using Firefox 23.0.1 (as some of the other users with the same problem). This was not a problem in the past with Firefox. Safari and Chrome continue load and display PDFs just fine from their addresses. This is a big problem as I now have to inform people who want to view my PDFs NOT TO USE FIREFOX BUT TO USE SAFARI OR CHROME.

It appears that a link to a PDF on an internet page will not download in Firefox either!
I went to this page:
http://www.nasa.gov/connect/ebooks/earth_art_detail.html#.UjYEzrwsU08
and tried to download the PDF link at the bottom of the page (Download: PDF 11.3 MB) It didn't work! Nothing happens. Tried it in Safari and it worked flawlessly.
I have a PDF file of my work in the public_html folder on my URL. I give the address generated by that file to people who want to view my work---this works perfectly in Safari and Chrome. As to your other question, can't bookmark it if I can't get to it in Firefox.

Loading And Displaying image From MYSQL

Hello, How can I load and display picture stored into a MYSQL database in a Swing GUI using for example JLable component.

establish a connection to ur sql, n
retireve the record with the images or image url in the db.
and then load it to a Image icon and set it to a JLabel.

I thought ff4 was suppose to be faster than 3.6 but it is slower loading and getting to websites. Are ther certain add-ons that could be affecting ff4 that did not affect 3.6?

ff4 generally slower loading and loading pages.

same problem here for the past two days till this morning when I created a new profile and removed ALL addons from the default profile. With the new profile with NO addons, I got to the sites with video that I had problem with and flash player did work.
Now, I only have three addons that have not created the problem; adblock, flashgot, and flashblock.
Create a new profile and check it out.

HT1600 I get the menu and can pick a movie but then it won't load and displays an error message

I get the menu and can pick a movie but then it won't load and displays an error

What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT

Load and display image using CDC

Hi everyone,
Please help. I'm new to java. I need a simple routine to load and display an image from the file system into a CDC app on windows mobile 5. I'm usin creme 4.1.
Thanx in advance

Use the following as a guide:
1. Get the image (path below must be absolute):
public static Image getImage(String filename) throws ScanException {
Image img = null;
// Read paths from properties file
StringBuffer buf = new StringBuffer("\\");
buf.append(ScanUtility.getPathImages());
buf.append("\\");
buf.append(filename);
buf.append(".jpg");
File dataFile = new File(buf.toString());
if(!dataFile.exists())
throw new ScanException("Cannot locate the file:\n" + dataFile.getAbsolutePath());
img = Toolkit.getDefaultToolkit().createImage(buf.toString());
return img;
2. Create a class to display the image (pass in the image, above):
ImagePanel class source:
import java.awt.*;
import java.awt.image.*;
public class ImagePanel extends Panel {
private Image image = null;
private Image scaledImage = null;
private boolean imageComplete = false;
public ImagePanel(Image img) {
image = img;
scaledImage = image.getScaledInstance(200, -1, Image.SCALE_DEFAULT);
prepareImage(scaledImage, this);
// Override the paint method, to render the image
public void paint(Graphics g) {
if(imageComplete) {
g.drawImage(scaledImage, 0, 0, this);
// Override imageUpdate method, to prevent repaint() from trying
// to do anything until the image is scaled
public boolean imageUpdate(Image img, int infoFlags, int x, int y, int w, int h) {
if(infoFlags == ImageObserver.ALLBITS) {
imageComplete = true;
repaint();
return super.imageUpdate(img, infoFlags, x, y, w, h);
public void flush() {
image.flush();
scaledImage.flush();
image = null;
scaledImage = null;
}

HT5559 slow loading and loading in sections

Start up began last week with a gray slow screen - past two days 13" mac is slow loading and loading in sections of white blocks on my screen - is it JAVA? What to do? It happens if I walk away for a short time, if it goes into screen saver and or if I put lid down - Got 13 " alumn case with Mtn Lion September 2012.

Go step by step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Caches > com.apple.Safari > Caches.db
    Right click the Caches.db file and select "Move To Trash.
    Close windows and relaunch Safari.
3. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
4. Delete Cookies
    Safari > Preferences > Privacy > Cookies and other website data:
    Click the “Details” button.
    Remove all cookies except from Apple, your internet service provider and banks.
5. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.
6. Update Adobe Flash Player.
     http://get.adobe.com/flashplayer/
7. Deselect Proxies if selected.
    System Preference > Network > Advanced > Proxies Tab
    Under "Select Protocol", uncheck any box if selected.
    Click "OK" then "Apply”.
8. if this doesn't help, do an EtreCheck and post the report here please.
     EtreCheck: https://discussions.apple.com/docs/DOC-6173

Skype phone not loading and displaying contacts.

Hi All,
I have a Skype cordless phone that has the latest firmware installed. My proble is that it now no longer loads and displays any of my contacts. I can see my contacts using the PC client but not on the Skype phone. All the other Skype phone funstions continue to work. Can anyone please help.
Thanks
Pau,

I have a similar issue with a new RTX4088 phone, as more than 20 online contacts show in my skype PC client, while only 3 or 5 of these show as online on the 4088 handset.
The software version show as 0172 / 11.02.2014 / rtx4088 lp vo172...
Has others noticed this issue?
Ocean Shores, NSW, Australia

Equipment action log and display changes nnot updating

Hello Guys,
it is little strange but for some of the equipments action log and display changes are not being updated.
The records are there only till 2007 but since 2008 whatever changes we make now they are not being recorded in action log or changes.
But strange thing here is usage list is being updated as it is supposed to be.
i have checked most of the config. but really not helpful.
i am clueless here.
Can anyone help?
Thanks & Regards,
vaibhav

Hi,
Please see attached code for your review:
Appreciate your valuable comments.
INCLUDE ZXEQMU02
*By: Ralph McKnight/AC Date: Mar061998.
*Description: Additional fields to be saved on append structures
            during equipment add/change - This development was
            Undertaken as a core modification - The exporting
            function parameters were changes to pass back the
            structures with the new user values.
*Sir4726 - Disable equipment popup box for equipment type 'E'
*Sartd42467-Add kokrs & kostl to auto maint
*By Ralph McKnight Apr161998.
*SARTD 75148 - 4.6C Upgrade, CH4K902173, Import/Export parameters can no
             longer have the same names, added a Changing parameter to
             return the changed values of EQUI and EQUZ to save the
             append structure fields ZAEQUI and ZAEQUZ for Job
             Resource Scheduling.
           - Also set the flags to update EQUI and EQUZ.
             by: HBAY342
*SARTD 92504 - Save new maintenance plant into ABAP memory. Needed for
             9/26/02 E.Krenz
*SARTD 109167 - AMI Foreign Trade REquirement. - Validations against
            - AMI Foreign Trade Synchronization tables(ZAESYNCDIV &
              (ZAESYNCMAT)         before save
              of the equipment.
SARTD 111318 - CHLK9A0I4A Check Equipment Acquisition Date, Value and
                 currency to avoid dump by SAP Standard system
SARTD 113133 AMI project: Added function call to prevent users from
             manually changing equipments when it is on a AMI transfer
             form.
KR 140649    AMI: Added parameter to FM call
             for Z_AMI_CHCK_IE02_UPDATE_ALLOWED. E.Krenz 12/23/03
03/02/2004 HBB8705   CHLK9A0WYR   EQUZ Append field rename
Modification Log
Date        User    Transport   KR     Description
06/29/2005 HBAK946 CHLK9A1N05 169999 RA Equipment Lockdown
                                       If equip is RA, check authority
                                       If no auth., then issue a mess
06/30/2005 HBAK946 CHLK9A1N29 169999 RA Equipment Lockdown
                                       Only process RA check if in
                                       t-code IE01, IE02 will be
                                       handled in user-exit
Begin of CH4K902173 - 4.6C upgrade - Changed import/export/changing
parameters
Old way follows:
*This is how the call to this routine should look with our mods.
*Note: the changes to the std are labeled with "DS Part 6 - RGM1
call customer-function '001'
     exporting
          data_equi           = equi
          data_eqkt           = eqkt
          data_equz           = equz
          data_iloa           = iloa
     importing
          own_msg             = own_msg
          data_equi           = equi "DS Part 6 - RGM1
          data_eqkt           = eqkt "DS Part 6 - RGM1
          data_equz           = equz "DS Part 6 - RGM1
          data_iloa           = iloa "DS Part 6 - RGM1
     exceptions
          posting_not_allowed = 1
          others              = 2.
New way follows:
CALL CUSTOMER-FUNCTION '001'
      EXPORTING
           ACTIVITY_TYPE           = ACTIVITY_TYPE
           DATA_EQUI               = EQUI
           DATA_EQKT               = EQKT
           DATA_EQUZ               = EQUZ
           DATA_ILOA               = ILOA
           MAIN_CLASS              = RM63E-KLASSE
           DATA_RM63E              = RM63E
      IMPORTING
           UPDATE_DATA_EQ          = UPDATE_DATA_EQ
           UPDATE_FLAGS_EQ         = UPDATE_FLAGS_EQ
           UPDATE_DATA_EZ          = UPDATE_DATA_EZ
           UPDATE_FLAGS_EZ         = UPDATE_FLAGS_EZ
      CHANGING
           CHGD_EQUI               = EQUI
           CHGD_EQUZ               = EQUZ
      EXCEPTIONS
           POSTING_NOT_ALLOWED     = 1
           POSTING_NOT_ALLOWED_EXT = 2
           OTHERS                  = 3.
End of CH4K902173 - 4.6C upgrade - Changed import/export/changing
Changes for SARTD 111318 to check Acquisition Date, Value and currency
Commented By Nikhil. Function Module looks to be specific for US.
*data: v_retval like sy-subrc.
                                                            "CHLK9A0I4A
*call function 'Z_VERIFY_ACQUISITION_DATA'
                                                            "CHLK9A0I4A
exporting
                                                            "CHLK9A0I4A
   p_equi        = data_equi
                                                            "CHLK9A0I4A
importing
                                                            "CHLK9A0I4A
retval        = v_retval.
                                                            "CHLK9A0I4A
*if v_retval ne 0.
                                                            "CHLK9A0I4A
raise posting_not_allowed.
                                                            "CHLK9A0I4A
*endif.
                                                            "CHLK9A0I4A
End of changes for SARTD 111318
*======================================================================
Begin of AMI
*======================================================================
Begin of insert SARTD 113133
read calling AMI program
DATA: z_ami_program(30) TYPE c.
CALL FUNCTION 'Z_AMI_CHECK_AMI_PRG_ACTIVE'
IMPORTING
    p_ami_program = z_ami_program.
AMI validations if Equipment Update is allowed
For checking Equipment Check permission.
CALL FUNCTION 'Z_AMI_CHCK_IE02_UPDATE_ALLOWED'
EXPORTING
    active_ami_program = z_ami_program
    data_equz          = data_equz
    data_equi          = data_equi
    data_iloa          = data_iloa
    main_class         = main_class
    data_rm63e         = data_rm63e
EXCEPTIONS
    update_not_allowed = 8.
IF sy-subrc NE 0.
RAISE posting_not_allowed.
ENDIF.
Commented By Nikhil. Function Module looks to be specific for US.
checks for equipment ring fencing (only for manual IE02)
*if z_ami_program is initial.
call function 'Z_AMI_IE02_EXIT_RING_FENCING'
      exporting
           data_equz          = data_equz
           data_rm63e         = data_rm63e
      exceptions
           update_not_allowed = 8.
if sy-subrc ne 0.
   raise posting_not_allowed.
endif.
*endif.
End of INSERT SARTD 113133
*======================================================================
End of AMI
*======================================================================
*======================================================================
Begin of RA Equipment Lockdown >> CHLK9A1N05
*======================================================================
check if equipment is Radio Active
DATA: i_matnr_tab LIKE zhazind OCCURS 0 WITH HEADER LINE.
DATA: v_land1(3) TYPE c.
DATA: v_ra_flag(1) TYPE c.
*Begin of code insertion by pavan on 02 June, 2008.
DATA: zeqpnr_eccn-zeccn TYPE zeqpnr_eccn-zeccn,
      wa_zeqpnr_eccn TYPE zeqpnr_eccn.
break pkumar.
IF sy-ucomm = 'BU'.
IMPORT zeqpnr_eccn-zeccn FROM MEMORY ID 'ZECCNUM'.
MOVE: data_equi-equnr TO wa_zeqpnr_eccn-zeqnr,
        zeqpnr_eccn-zeccn TO wa_zeqpnr_eccn-zeccn.
MODIFY zeqpnr_eccn FROM wa_zeqpnr_eccn.
CLEAR wa_zeqpnr_eccn.
ENDIF.
*End of code insertion by pavan on 02 June, 2008.
IF sy-tcode = 'IE01'.
IF NOT data_equi-matnr IS INITIAL AND
     NOT data_equz-zzswerk IS INITIAL.
    SELECT SINGLE land1 FROM t001w
           INTO v_land1
           WHERE werks = data_equz-zzswerk.
    CLEAR: i_matnr_tab.
    REFRESH: i_matnr_tab.
    i_matnr_tab-matnr = data_equi-matnr.
    APPEND i_matnr_tab TO i_matnr_tab.
    CALL FUNCTION 'Z_MATERIAL_HAZARD'
      EXPORTING
        pland1    = v_land1
      TABLES
        matnr_tab = i_matnr_tab.
check if radio active
    READ TABLE i_matnr_tab INDEX 1.
    IF sy-subrc = 0.
      IF i_matnr_tab-ramat = 'X'.
check if user has Radio Active access
        AUTHORITY-CHECK OBJECT 'S_TCODE'
                    ID 'TCD' FIELD 'ZIE02_RA'.
        IF sy-subrc NE 0.
          MESSAGE w000(z5) WITH 'No access to create RA equipment'.
          RAISE posting_not_allowed.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.
ENDIF.
*======================================================================
End of RA Equipment Lockdown << CHLK9A1N05
*======================================================================
*CHECK NOT data_equi-eqtyp = 'E'.
*CHECK NOT data_equi-eqtyp = 'F'.
DATA: v_stor_ucomm LIKE sy-ucomm.
DATA: v_equnr LIKE data_equz-equnr.
*Save the system user command field
v_stor_ucomm = sy-ucomm.
v_equnr = data_equz-equnr.
*Get the additional information
CALL FUNCTION 'Z_GET_MORE_EQUIPMENT_INFO'
CHANGING
    s_equi    = data_equi
    s_equz    = data_equz
    s_rm63e   = data_rm63e
EXCEPTIONS
    cancelled = 1.
*Begin of changes for SARTD 113691
IF sy-subrc NE 0.                                           "CHLK9A0KY9
RAISE posting_not_allowed.                                "CHLK9A0KY9
ENDIF.                                                      "CHLK9A0KY9
End of changes for SARTD 113691
*Restore the equip number
data_equz-equnr = v_equnr.
data_equz-zzkokrs = data_iloa-kokrs.                        "CHLK9A0WYR
data_equz-zzkostl = data_iloa-kostl.                        "CHLK9A0WYR
data_equz-zzswerk = data_iloa-swerk.                        "CHLK9A0WYR
*****SARTD 109167
*vALIDATE VALUES PER ami fOREIGN TRADE SYNCHRONIZATION RULES
*set screen 0101.
CALL FUNCTION 'Z_AMIFT_VALIDATE_EQUIP_MATNR'
TABLES
P_MESSAGES       =
CHANGING
    p_equi           = data_equi
    p_equz           = data_equz.
*****SARTD 109167
CH4K902173 - Should update EQUI and EQUZ, set flag to TRUE.
chgd_equi = data_equi.                                      "CH4K902173
chgd_equz = data_equz.                                      "CH4K902173
*Begin of Changes - CHLK980219 data not retained when creating record
*UPDATE_FLAGS_EQ = 'X'.                       "CH4K902173
*UPDATE_FLAGS_EZ = 'X'.                       "CH4K902173
*End of Changes
*If cancel was hit then back out of save
IF sy-subrc NE 0.
RAISE posting_not_allowed.
ENDIF.
*Restore the system user command field
sy-ucomm = v_stor_ucomm.
Begin of insert        SARTD 92504, AMI 9/26/02, E.Krenz
Store new maintenance plant in memory to be used by ZAEQASBR for
immediate ransfer of maintenance items.
EXPORT data_equz TO MEMORY ID 'ZAEQASBR'.
End of insert
>> CHLK9A1N29
clear transaction varient before going to IE02 or IE01 main screen
CALL FUNCTION 'RS_HDSYS_SET_TC_VARIANT'
EXPORTING
    variant                 = ' '
    flag_client_independent = 'X'
    overwrite_variant       = 'X'.
<< CHLK9A1N29
Regards,
vaibhav.

How do you change the logon screen in 10.7.4

A few months ago I changed my logon screen background to something more desirable for my tastes. Recently, I updated my software to vers. 10.7.4 and the update reverted my custom logon screen back to the original. I tried changing it back, but it seems as though the location of the image has been changed as when I navigated there, my original "Custom image" was still there, but my actual logon screen still displays the factory image. What gives? Where do I go to change back to my custom image?

I love Apple and I love my MBP. Also, I understand where your coming from when you say I shouldn't be messing around with the OS resources. Normally, a person would not go through the trouble (and/or the possible catastrophic consequences) of changing things like this, but computers fascinate me and I love learning about them. I'm sure there are many others out there like me. It is just a personal preference of mine to want to change the logon background (and gain the learning experience that goes along with it). My preferred logon screen DOES pay homage to Apple and being a second year programming major (yes, I am thus far only in my second year) it is what I like to learn about. I would not have endeavored in something like this if I did not think I could fix it if something went wrong. Like I said before, it would be nice to be able to change it as easy as it is to change the desktop background, but the learning experience is valuable too.

When receiving email, Thunderbird freezes and displays "Not Responding" in screen header. Adds popstate folder to account.

I'm running Thunderbird 31.6.0 on Windows 8.1 with BitDefender 2013.
PROBLEM:
When getting email, Thunderbird freezes and displays "Not Responding" in screen header.
When TB is closed then reopened, a popstate folder (popstate-1.dat) is added to account. A new popstate folder appears with each crash/freeze, and as long as they are not deleted, they pile up with unique numbers (popstate-1.dat, popstate-2.dat, etc.).
(see attached screenshot)
NOTE: I've included troubleshooting details below for all the fixes I tried, thinking it might be helpful to anyone who has a similar problem and is thinking about going down those paths. Ultimately, it seems that FIX ATTEMPT 5 is the winner.
==================================
FIX ATTEMPT 1:
Following the suggestion in this archived mozilla support post: https://support.mozilla.org/en-US/questions/1026288, I restarted Thunderbird in Safe Mode (Help > Restart with Add-Ons disabled...), checking the "Disable all add-ons" and "Reset toolbars and controls" and clicking "Make Changes and Restart" button.
In Add-Ons Manager, BitDefender Toolbar now appears to be disabled.
(see attached screenshot)
But the problem persists.
FIX ATTEMPT 2:
Following the suggestion in this archived mozilla support post: https://support.mozilla.org/en-US/questions/1016811, I clicked Help > Troubleshooting Information > Show Folder button. This opens a File Explorer window for 3I58b9dq.default (this is the "profile" folder) which contains panacea.dat and folderTree.json files.
I changed file names to panacea-changed.dat and folderTree-changed.json (rather than deleting them, in case I need to restore them), and I reopened Thunderbird.
This did not solve the problem -- and, furthermore, the profile folder seems to have automatically generated new panacea.dat and folderTree.json files to replace those for which I changed the filenames.
FIX ATTEMPT 3:
Following the suggestion in this mozilla support post: https://support.mozilla.org/en-US/questions/1044774, I restarted Windows 8.1 in safe mode with networking enabled (using these instructions: http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/.)
TB does not crash when Windows runs in safe mode, but the aspect ratio of my display is distorted; everything's really big and stretched horizontally, and my two displays are mirrored rather than extended. Running Windows perpetually in safe mode is not the ideal fix.
QUESTION 1: I understand that troubleshooting is supposedly done best in safe mode — What might I do in safe mode to diagnose the Thunderbird problem?
FIX ATTEMPT 4:
This article https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#Symptoms, suggests that problems with Thunderbird associated with BitDefender can be solved by uninstalling and re-installing BitDefender.
Not really comfortable uninstalling and re-installing, I disabled Bitdefender (Settings button > Antivirus button > Shield tab > On-Access Scanning toggle Off) to see if that would work. It did not fix the problem.
QUESTION 2: Would uninstalling BitDefender be any different than disabling it?
FIX ATTEMPT 5:
Create a Bitdefender Exclusion for the Thunderbird folder:
Settings button > Antivirus button > Exclusions tab > Excluded files and folders link > Add button > navigate to Thunderbird folder (c:\users\username\appdata\roaming\thunderbird) > Both radio button > Add button > OK button
THIS FIX DID THE TRICK! YAY!

FIX ATTEMPT #5 above did the trick, and now I see that it was the chosen solution for a similar post of the same problem at https://support.mozilla.org/en-US/questions/1044774

Portal Run time error after changing the logon screen

Hi all,
I am running an EP7 SP08 and I try to change the logon screen as described on:
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
I copied the 'com.sap.portal.runtime.logon.par.bak' file, renamed it to 'my.new.logon.par'. after that I extracted the file with winzip. I opened the directory 'PORTAL-INF\lib\' and there I extracted the file 'umelogonbase.jar' with winrar. I opened the file 'logonLabels_en.properties' and changed the entry 'xtit_WELCOME=Welcome' to 'xtit_WELCOME=blablabla'.
I repacked the umelogonbase.jar with winrar again and after that I repacked the 'my.new.logon.par' with winzip again.
Then I placed the par file back at '<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd' and changed the authscheme.xml with the new par file and changed the 'login.authschemes.definition.file' all described on the help.sap.com url mentioned above.
However, when I restart the portal and open the logon screen I see the error message:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file
The default trace shows the following message:
An error occured during authscheme computation.
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : my.new.logon.certlogon
Is there anyone who knows what goes wrong? The description on help.sap.com is very straightforward but still it doesn't work for me...
Any help would be appreciated.
Kind Regards,
Nico van der Linden...

Hi,
Check if you did the following steps pertaining to the authschemes.xml file:
--> Download the authschemes.xml to local drive. Rename the file to,say, authschemes_new.xml
--> In authschemes_new.xml, did you change <b>all</b> entries of com.sap.portal.runtime.logon with the name of modified logon par file?
-->Upload the authschemes_new.xml file using configtool; and, change the property login.authschemes.definition.file to authschemes_new.xml in configtool.
-->Finally,restart your portal. Hope it helps.
Regards,
M.Subathra

How Do I Change The Logon Screen Background?

Hi...
I was wondering how to go about changing the logon screen background... You know... The screen background you see when you first boot the Mac and it's sitting at the logon window waiting to be logged on?
Thanks in advance!!

You can do this with OnyX: http://www.titanium.free.fr/download.php
The image you want to use has to be in one of a few locations:
This button allows you to choose a replacement image for the background of the Login Window. By default, the application directs you to the folder containing the Desktop Pictures of Mac OS X (/Library/Desktop Pictures/...). You can choose another image but it must be accessible by all users, for example in the Public, Shared or Sites folder.
Formats accepted: PNG, JPEG, JPEG-2000, GIF, PSD, TIFF, TGA, BMP.
It's in the Parameters > Login tab.

HP Photosmart A516 keeps trying to power up and displays 07564DD6 on the screen

My HP Photosmart A 516 keeps trying to power up and displays #07564DD6 on the screen.

sunny_67 wrote:
When I press the on switch slider, the notebook shows lights then CPU fan begins to spin. It immediately slows down then stops. Power light stays on, but nothing else happens. No startup screen, nothing. To do it again, power cable must be disconnected then reconnected. Does anybody has any idea? Please help.
Once you get it to turn on, I would check to see if there is a BIOS update available for your machine.

Yosemite slow load and display changes at logon screen

Similar Messages

Maybe you are looking for