Yosemite update issues with VPN

I've just updated to Yosemite and now having problems with my VPN.. My VPN connects fine but Entourage fails to connect plus I can't connect to our office server to access files. Our office server is Microsoft Small Business Server and using Exchange for email. All was working fine before the update and can't find any answers on the net. This is very frustrating as I need mobile access for work. Can anyone help point me in the right direction to resolve this?

The problem most likely wasn't the update. The App Store, iTunes, and other Apple services were out for most of the day (11 Mar). Now working.

Similar Messages

Yosemite update issues with icloud/itunes

Hello, I updated last night and this morning I am unable to log into the app store or iTunes via any device. I can log into icloud.com but cannot use any of the apps. Safari is now all gibberish - similar to the way chrome behaves at times - Fonts are not reading. Not being able to access the apps like pages is a huge problem for me.
How do I undo the install from last night.
Please help

The problem most likely wasn't the update. The App Store, iTunes, and other Apple services were out for most of the day (11 Mar). Now working.

Where is the forum for Windows Update issues with Windows 10 TP 9926

Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

Might try them over here.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

AAA issues with VPN and IPCP?

Hi,
I have been struggling to find a solution as to why my L2TP tunnel comes up, but, no ip through IPCP is working. I have a few third party VPN providers that I can connect to with no problem. My config is solid as far as the Virtual-PPP interface is concerned. So, as far as the AAA is concerned, here are a few commands that I have used:
aaa new-model
aaa authentication login local_auth local
aaa authentication ppp default none
So, here is the revelant debugs:
008940: *Jan 7 15:08:05.543 MDT: Vp1 LCP: Timeout: State Listen
008941: *Jan 7 15:08:05.543 MDT: AAA/AUTHOR (00000007): Method list id=0 not configured. Skip author
008942: *Jan 7 15:08:05.543 MDT: Vp1 PPP: Authorization NOT required
008943: *Jan 7 15:08:05.543 MDT: Vp1 PPP: No remote authentication for call-out
008944: *Jan 7 15:08:05.543 MDT: Vp1 AAA/AUTHOR/LCP: Authorization succeeds trivially
008945: *Jan 7 15:08:05.543 MDT: Vp1 LCP: O CONFREQ [Listen] id 142 len 10
008946: *Jan 7 15:08:05.543 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008947: *Jan 7 15:08:07.559 MDT: Vp1 LCP: Timeout: State REQsent
008948: *Jan 7 15:08:07.559 MDT: Vp1 LCP: O CONFREQ [REQsent] id 143 len 10
008949: *Jan 7 15:08:07.559 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008950: *Jan 7 15:08:09.575 MDT: Vp1 LCP: Timeout: State REQsent
008951: *Jan 7 15:08:09.575 MDT: Vp1 LCP: O CONFREQ [REQsent] id 144 len 10
008952: *Jan 7 15:08:09.575 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008953: *Jan 7 15:08:11.591 MDT: Vp1 LCP: Timeout: State REQsent
008954: *Jan 7 15:08:11.591 MDT: Vp1 LCP: O CONFREQ [REQsent] id 145 len 10
008955: *Jan 7 15:08:11.591 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008956: *Jan 7 15:08:13.607 MDT: Vp1 LCP: Timeout: State REQsent
008957: *Jan 7 15:08:13.607 MDT: Vp1 LCP: O CONFREQ [REQsent] id 146 len 10
008958: *Jan 7 15:08:13.607 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
008959: *Jan 7 15:08:13.691 MDT: Vp1 LCP: I CONFREQ [REQsent] id 0 len 8
008960: *Jan 7 15:08:13.691 MDT: Vp1 LCP: AuthProto PAP (0x0304C023)
008961: *Jan 7 15:08:13.691 MDT: Vp1 LCP: O CONFACK [REQsent] id 0 len 8
008962: *Jan 7 15:08:13.691 MDT: Vp1 LCP: AuthProto PAP (0x0304C023)
008963: *Jan 7 15:08:13.691 MDT: Vp1 LCP: State is Open
008964: *Jan 7 15:08:13.691 MDT: Vp1 PPP: Phase is AUTHENTICATING, by the peer
Cisco3825#
008965: *Jan 7 15:08:13.691 MDT: AAA/AUTHEN/PPP (00000007): Pick method list 'default'
008966: *Jan 7 15:08:13.691 MDT: Vp1 LCP: I CONFREJ [Open] id 146 len 10
008967: *Jan 7 15:08:13.691 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
008968: *Jan 7 15:08:13.691 MDT: Vp1 LCP: O CONFREQ [ACKsent] id 147 len 4
008969: *Jan 7 15:08:13.775 MDT: Vp1 LCP: I CONFACK [ACKsent] id 147 len 4
008970: *Jan 7 15:08:13.775 MDT: Vp1 LCP: State is Open
008971: *Jan 7 15:08:13.775 MDT: AAA/AUTHEN/PPP (00000007): Pick method list 'default'
Cisco3825#
008972: *Jan 7 15:08:23.783 MDT: Vp1 AUTH: Timeout 1
Cisco3825#
008973: *Jan 7 15:08:33.799 MDT: Vp1 AUTH: Timeout 2
Cisco3825#
008974: *Jan 7 15:08:43.815 MDT: Vp1 AUTH: Timeout 3
Cisco3825#
008975: *Jan 7 15:08:53.831 MDT: Vp1 AUTH: Timeout 4
Cisco3825#
008976: *Jan 7 15:09:03.847 MDT: Vp1 AUTH: Timeout 5
Cisco3825#
008977: *Jan 7 15:09:07.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008978: *Jan 7 15:09:13.864 MDT: Vp1 AUTH: Timeout 6
Cisco3825#
008979: *Jan 7 15:09:17.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008980: *Jan 7 15:09:23.880 MDT: Vp1 AUTH: Timeout 7
Cisco3825#
008981: *Jan 7 15:09:27.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008982: *Jan 7 15:09:33.896 MDT: Vp1 AUTH: Timeout 8
Cisco3825#
008983: *Jan 7 15:09:37.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008984: *Jan 7 15:09:43.912 MDT: Vp1 AUTH: Timeout 9
Cisco3825#
008985: *Jan 7 15:09:47.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008986: *Jan 7 15:09:53.928 MDT: Vp1 AUTH: Timeout 10
Cisco3825#
008987: *Jan 7 15:09:57.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008988: *Jan 7 15:10:03.944 MDT: Vp1 AUTH: Timeout 11
008989: *Jan 7 15:10:03.944 MDT: Vp1 PPP: Sending Acct Event[Down] id[7]
008990: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): NET DOWN
008991: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007): Method list not found
008992: *Jan 7 15:10:03.944 MDT: AAA/ACCT(00000007): del node, session 4
008993: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007): free_rec, count 0
008994: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007) reccnt 0, csr FALSE, osr 0
008995: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Update Vp1
008996: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [pre-sess] (rx/tx) base 2114/15028 pre 15468/32490 call 15468/32490
008997: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [pre-sess] (rx/tx) adjusted, pre 13354/17462 call 0/0
008998: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Update Vp1
008999: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [sess] (rx/tx) base 2114/15028
Cisco3825# pre 15468/32490 call 15468/32490
009000: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [sess] (rx/tx) adjusted, pre 13354/17462 call 0/0
009001: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Deregister Vp1
009002: *Jan 7 15:10:03.944 MDT: Vp1 PPP: Phase is TERMINATING
009003: *Jan 7 15:10:03.944 MDT: Vp1 LCP: O TERMREQ [Open] id 148 len 4
009004: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): CALL STOP
009005: *Jan 7 15:10:03.944 MDT: AAA/ACCT(00000007) reccnt 0, osr 0
009006: *Jan 7 15:10:04.028 MDT: Vp1 LCP: I TERMACK [TERMsent] id 148 len 4
009007: *Jan 7 15:10:04.028 MDT: Vp1 LCP: State is Closed
009008: *Jan 7 15:10:04.028 MDT: Vp1 PPP: Phase is DOWN
009009: *Jan 7 15:10:04.028 MDT: Vp1 PPP: Phase is ESTABLISHING, Passive Open
009010: *Jan 7 15:10:04.028 MDT: Vp1 LCP: State is Listen
Cisco3825#
009011: *Jan 7 15:10:06.024 MDT: Vp1 LCP: Timeout: State Listen
009012: *Jan 7 15:10:06.024 MDT: AAA/BIND(00000009): Bind i/f Virtual-PPP1
009013: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Register Vp1 100Mbit/s, poll every 5m 0s
009014: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Update Vp1
009015: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Vp1 [init-sess] (rx/tx) base 15474/32498 pre 15474/32498 call 15474/32498
009016: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Vp1 [init-sess] (rx/tx) adjusted, pre 0/0 call 0/0
009017: *Jan 7 15:10:06.024 MDT: AAA/ACCT/EVENT/(00000009): CALL START
009018: *Jan 7 15:10:06.024 MDT: Getting session id for NET(00000009) : db=6902396C
009019: *Jan 7 15:10:06.024 MDT: AAA/ACCT(00000000): add node, session 6
009020: *Jan 7 15:10:06.024 MDT: AAA/ACCT/NET(00000009): add, count 1
009021: *Jan 7 15:10:06.024 MDT: Getting session id for NONE(00000009) : db=6902396C
009022: *Jan 7 15:10:06.024 MDT: AAA/AUTHOR (0000
Cisco3825#0009): Method list id=0 not configured. Skip author
009023: *Jan 7 15:10:06.024 MDT: Vp1 PPP: Authorization NOT required
009024: *Jan 7 15:10:06.024 MDT: Vp1 PPP: No remote authentication for call-out
009025: *Jan 7 15:10:06.024 MDT: Vp1 AAA/AUTHOR/LCP: Authorization succeeds trivially
009026: *Jan 7 15:10:06.024 MDT: Vp1 LCP: O CONFREQ [Listen] id 149 len 10
009027: *Jan 7 15:10:06.024 MDT: Vp1 LCP: MagicNumber 0x1A23E698 (0x05061A23E698)
009028: *Jan 7 15:10:06.108 MDT: Vp1 LCP: I CONFREJ [REQsent] id 149 len 10
009029: *Jan 7 15:10:06.108 MDT: Vp1 LCP: MagicNumber 0x1A23E698 (0x05061A23E698)
009030: *Jan 7 15:10:06.108 MDT: Vp1 LCP: O CONFREQ [REQsent] id 150 len 4
009031: *Jan 7 15:10:06.192 MDT: Vp1 LCP: I CONFACK [REQsent] id 150 len 4
Cisco3825#
009032: *Jan 7 15:10:07.356 MDT: Vp1 PPP: Outbound ip packet dropped
009033: *Jan 7 15:10:08.104 MDT: Vp1 LCP: Timeout: State ACKrcvd
009034: *Jan 7 15:10:08.104 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 151 len 4
009035: *Jan 7 15:10:08.188 MDT: Vp1 LCP: I CONFACK [REQsent] id 151 len 4
Cisco3825#
009036: *Jan 7 15:10:10.120 MDT: Vp1 LCP: Timeout: State ACKrcvd
009037: *Jan 7 15:10:10.120 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 152 len 4
009038: *Jan 7 15:10:10.204 MDT: Vp1 LCP: I CONFACK [REQsent] id 152 len 4
Cisco3825#show
009039: *Jan 7 15:10:12.136 MDT: Vp1 LCP: Timeout: State ACKrcvd
009040: *Jan 7 15:10:12.136 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 153 len 4
009041: *Jan 7 15:10:12.216 MDT: Vp1 LCP: I CONFACK [REQsent] id 153 len 4
Cisco3825#show l2tp
009042: *Jan 7 15:10:14.152 MDT: Vp1 LCP: Timeout: State ACKrcvd
009043: *Jan 7 15:10:14.152 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 154 len 4
009044: *Jan 7 15:10:14.232 MDT: Vp1 LCP: I CONFACK [REQsent] id 154 len 4
Cisco3825#show l2tp
L2TP Tunnel and Session Information Total tunnels 1 sessions 1
LocTunID RemTunID Remote Name State Remote Address Sessn L2TP Class/
Count VPDN Group
37822 1 xxxxxxxxxxxx est xxx.xxx.xxx.xxx 1 l2tp_default_cl
LocID RemID TunID Username, Intf/ State Last Chg Uniq ID
Vcid, Circuit
124 1 37822 1, Vp1 est 00:02:03 1
Here are a couple things I noticed:
009001: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Deregister Vp1
008990: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): NET DOWN
I don't have this issue with other providers. I don't have the whole radius / tacacs things setup as it's not necessary for our needs.
Ideas?
Thanks for the help.
Jason

Hi,
To resolve your issue as soon as possible, please post your question on the Forefront TMG forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=Forefrontedgegeneral
Steven Lee
TechNet Community Support

Updating Issue with iTunes 7.0.1.8

A few weeks ago I made the jump to the newly released iTunes 7.0. I had a slew of issues with this update (which by the way Apple has still not provided a working solution for), which I addressed in detail in this post: http://discussions.apple.com/thread.jspa?messageID=3170496#3170496
Today I updated to the new iTunes 7.0.1.8. There were no issues during the installation itself, however afterwards is a completely different story. When I attempt to open iTunes, I receive the following error message: "This action is only valid for products that are currently installed."
My first thought was to see if Quicktime is working normally. It is. No problem there. I thought perhaps I should try repairing the installation. So I went to Settings > Control Panel > Add/Remove Software > iTunes. I attempted to use the 'repair' option. This did not work at all.
At this point I restarted my computer and uninstalled iTunes. I restarted once again and reinstalled. When the installation had finished I received the prompt, "would you like to run iTunes after the installation is completed?" I clicked 'yes.' iTunes opened, no problem.
I closed iTunes and attempted to reopen it normally. It would not open, instead giving me the same message: "This action is only valid for products that are currently installed."
I thought the previous issues with iTunes not recognizing my iPod were bad enough but now I can't even open iTunes at all. This is absolutely unacceptable on Apple's part. It was bad enough that they released 7.0 with all its bugs, but at this point they should have their act together. Instead the problems are getting worse.
Dell Dimension 4600 Windows XP Pro

Please let me know if I can get rid of this feature.
You sure can.
iTunes View menu > Hide MiniStore will do the trick.

Camera RAW update issue with Bridge CS6

Hi folks,
I recently installed a routine update for Camera RAW 8.4 and now have a bunch of issues with Bridge including -
- No previews or ratings showing
- Ratings filter not working
- Can't open images directly into Camera RAW without first opening Photoshop (ie - keyboard shortcut not working and File menu command "Open in Camera raw" not available)
- Can't access or open Camera RAW preferences
I've tried resetting Bridge to default settings but didn't help and ACR still works fine opening in PS. I've attached two screenshots to show the problem better.
Anyone else having these problems? Any solutions?

This should fix it: Camera Raw 8.4 | No metadata or Camera Raw edit

IOS 8.2 update issues with camera on iPhone 5s

Hi everyone, after updating my iPhone 5s to IOS 8.2 i have issues with camera. When i open it everything seems fine, but then when i take a picture, i can not access my gallery for the lower left corner nor i can find any picture saved in my gallery. I have to say that i have enough available storage space. But for some reason not even one photo is there since i have updated my phone.
thanks in advance for any suggestions on how to solve this problem.
ivy

Dolphster wrote:
How about this.... now that I've update to iOS 8.2, I can not log into the itunes store on my iphone/ipad and also macbook pro. urgh.
As your problem is completely different than the original post, it would be both more effective and more polite to start your own thread with a properly descriptive subject line.
Best of luck.

10.4.8 update - issues with mail and airport

Gah! Just as I was signing up so I could post on this board, my airport connection went bye-bye.
Initially I tinkered with my router (linksys) settings. Recycled everything a bajillion times. Not sure what caused a partial resolution, but my connection is no longer crawling, but it drops a few times a day. The only solution at this point is to recycle modem and router and restart computer.
Now I am having issues with my mail application. Whenever I "get mail" I am prompted for my password. I type it in, plus check the box "add to keychain". App searches for mail. So I went into account prefs and noticed there is no password in the dialog box. I type it in. If I save and close the dialog and then reenter, the password is once again missing. Huh??
So I reinstalled with the combo update (I had previously installed via software update), verifying/repairing disk before, repairing permissions after.
I have removed the system config folder in order for the system to create a new one.
When I look in keychain access, the only thing in there is the airport login. I have also performed a keychain first aid. Nothing appears to be wrong.
Any suggestions??
I patiently await responses.
Oh, and I applied the first update in proper fashion as well. No weird third party stuff, etc. And I didn't have any of these issues pre-update...
mbp Mac OS X (10.4.8)

1. Reset the router by holding down the button in the
rear for 10 seconds.
I've done that ad nauseum, plus tweaked router settings, plus recycled modem/router many times. It does not appear to be a problem with the router hardware or software.
2. Toss your Mail Account, and make a new one.
If indeed that is the solution, is there an efficient way to save/export messages so I don't lose them?
mbp Mac OS X (10.4.8)

Strange issue with VPN

Hello, I have a strange issue with a VPN we have on our ASA 5520. We have 2 subnets my side of the VPN that can get to 27 subnets on the other side of the VPN. However the last remote subnet which I will call 28 I find only 1 of my 2 subnets can get too. When I reset the tunnel I find that my subnet cannot bring the IPSec tunnel up but the othe side of the tunnel can. When I view my VPN tunnel Rx always has a value but Tx is always zero, which suggests the traffic isnt even getting there, but this subnet is all the same rules as the other subnets that work. Any debug commands or tracing you can suggest? I've had others look at the issue and the cant see an issue. Thanks

Looks like you have a OD server setup for user authentication so you need to run this
vpnaddkeyagentuser /LDAPv3/127.0.0.1
that will add the correct record to OD and it will authenticate.
Peter

Has anyone had app update issues with iOS 8.1?

I'm running iOS 8.1 on a iPhone 6+. If I try to update an app from the app store without being logged in, it will hang the process and the update will fail.
Previously, with my iPhone 4 and iOS 7.1.2 the app store would ask me to log in when an app update was attempted without being logged in.
The work around until apple fixes this bug is to ensure you are logged in BEFORE attempting an app update. An honest techie at the local apple store admitted this is a bug (one of many) in iOS 8.1. Has anyone else had this issue with iOS 8.1

Nope, I'm able to update an app in iOS 8.1, even if I'm not first logged into the iTunes & App Store in Settings. It prompts me to update the app, then I sign in with my password.
Do you have Touch ID enabled for App Store or not?

Issue with VPN compatibility between 2811 and 2911

hello
I would like to ask anyone have had any issues with setting up a VPN tunnel between 2811 and 2911?
The IPSec VPN is established but for some reason I cannot ping the LAN side to the other LAN side of the other end of the VPN Router?
Any experience would be much appreciated
Thanks

IPSec VPN can be with no problem set up between any cisco routers (and not nesesserely cisco), so there are should be no issues in your case.
If you say that tunnel is established successfully, then problem most probably related to routing issues between sites or incorrect crypto-acl configured. Check if hosts on both sites have correct routing information on how to get to subnets on the other site.
To make more accurate assumptions it would help if you provide config on both sites and describe your topology.

Yosemite update issue

Hi, in the past few hours I downloaded OS X Yosemite Update V10.10.3 Macbook Pro. Now when I go to open iPhoto it says ‘The library “iPhoto Library” is open in mbpluginhost. To open this library in iPhoto you must quit mbpluginhost.’ Is there some way to fix this?

Hi ..
Better to not delete any system files. It might make things worse.
Make sure your Mac can run Yosemite > Apple - OS X Yosemite - How to Upgrade
If installed, disable anti virus software then try resuming the download > Mac App Store: How to resume interrupted downloads
If you do not have anti virus software installed, apps such as Little Snitch, Growl, MacKeeper, may interrupt the upgrade process.
Yosemite requires 5.16GB's of storage space. Click your Apple  top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space.
Make sure Gatekeeper is enabled.
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected.
If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

Mac Book Air after Lion X Update issue with Battery

Using Mac Book air Later 2010 Model , after upgrading Lion X Now the Battery is just draind in 2 hours of working , is it the issue with thre OS or some Hardwear is failing .!!??
Please help and suggest .
Thanks
Monal Thakkar

Thanks how do I get the latest version then? online its asking me to submit address details and all sort and I'm not keen to do that, I'm working away from the city I bought it in and there is no Apple Store near me yet?

Issues with vpn connection thru ATT DSL

Hi I hope someone can help me out...
At work we use Cysco VPN Client Verstion 4.8.02.0010
Everyone (about 18 people) can connect to it from their homes. For some reason I am the only member who can not connect.
I am tryihg to connect Via ATT DSL and Cysco VPN Client shows that I am connected, however,
I have no access to any of the networks from work.
I have tried connecting using Cox Cable from a friend's home and it connects just fine.
I have read many threads online that indicate that this is a common occurance with ATT DSL users but I have not found
the fix.
I am using modem/router type 2701 HG-B
Any feedback will be greatly appreciated.
Thank you,

Make sure the encrytpion and parameters such as VPN group are negtotiated properly between the client and the server. Refer http://cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtml for most commonly occuring VPN issues . Contact ATT for configuring their servers.

Latest Firmware Update Issues with Screen Sensitivity

Hi All,
I synced my original iphone a few days ago and it required a firmware update. Since then, I have had numerous problems with the touchscreen for email and texting. Sometimes, I cannot open a folder on one of my emails or send a text because hitting the "send" icon does nothing. I've restarted my phone and reset it but have not yet tried a restore. Had anyone else had these issues?
And do you have any other suggestions I should try before doing a restore? Many thanks.
Kathy

Do not know about its compatibility and functionality.. but if you are OK with Beta softwares.. you may have a look at..
http://betalabs.nokia.com/blog/2011/03/16/nokia-software-updater-for-mac-available-in-beta?restsso_p...

Yosemite update issues with VPN

Similar Messages

Maybe you are looking for