You are making me very frustrated with your contorted way of communicating.

You are making me very frustrated with your contorted way of communicating
I tried the suggested procedures. Took out cartridges, replaced them in proper order. Shut off machine. Unplugged machine for more than 10 minutes.
After plugging in machine & turning on, the same error message appeared. It is constant and the machine will not perform in any way including for scanning.
The suggested procedure did not eliminate the error. Your message suggested I go through the "contact us" screen but I've done that twice already.
Not willing to play that dumb game again.

Hi Sjpop,
To have a better understanding of your issue, please let everyone know what operating system and equipment you are using. That way, community will be able to assist you with suggestions appropriate for your product.
Thanks!

Similar Messages

  • If you are JUST now signing up with your new iPhone Read this First!!

    If you have not begun the activation process - Stop Read - and then Proceed.
    Sign up for a new number when you activate!!!!
    DON"T MOVE YOUR NUMBER OVER
    If you are with AT&T - add an additional line
    If you are with another carrier - Get a new number.
    You can bring your old number over to the iPhone at a later date. The back log for activation is on bring in old numbers over - Not for new numbers.
    So, if you want to wait in vain and ***** and moan and suffer like the rest of us - Say you want to bring your number over.
    If you want to start playing with the coolest phone ever: Get a new Number, then deal with having your old number moved once the insane sign up frenzy dies down a bit in a few days.
    I'm sure this activation problem will go away, once the frenzy is over.
    My two bits.
    enjoy your phone!
    iMac 20" Intel core 2 Duo   Mac OS X (10.4.9)   2GB RAM Installed

    If you have not begun the activation process - Stop
    Read - and then Proceed.
    Sign up for a new number when you activate!!!!
    DON"T MOVE YOUR NUMBER OVER
    If you are with AT&T - add an additional line
    If you are with another carrier - Get a new number.
    You can bring your old number over to the iPhone at a
    later date. The back log for activation is on bring
    in old numbers over - Not for new numbers.
    So, if you want to wait in vain and ***** and moan
    and suffer like the rest of us - Say you want to
    bring your number over.
    If you want to start playing with the coolest phone
    ever: Get a new Number, then deal with having your
    old number moved once the insane sign up frenzy dies
    down a bit in a few days.
    I'm sure this activation problem will go away, once
    the frenzy is over.
    My two bits.
    enjoy your phone!
    iMac
    20" Intel core 2 Duo   Mac OS X (10.4.9)  
    2GB RAM Installed
    Activation, selecting to move my existing AT&T number, worked fine. The whole process took barely 5 minutes to complete all within ITunes.

  • How do you get rid of this pop up message: You are currently browsing the web with and it is recommended that you update your video player to the fastest version available. Please update to continue.

    I am getting this pop up message: You are currently browsing the web with and it is recommended that you update your video player to the fastest version available. Please update to continue.
    How do I get rid of it? I have tried searching the web and I have only seen solutions for chrome and firefox. Thanks.

    the link to the page is below
    http://www.viesio9q58.com/41612C472C746D6E5047462D522B3A499CE6BD0593A068E7860909 6F792C3C69D19ECDCE71575FC8DABD23D1A0E21C93?PubID=79_3527_3100&tgu_src_lp_domain= www.newallsoft.com&ClickID=7649753723

  • HT201209 I'm new to this an yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me

    yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me

    What e-mail are you talking about?
    What exactly did it say?
    Are you sure that the e-mail was not your receipt?

  • Unable to access CC assets and VERY frustrated with support

    I just spent a fruitless hour trying to discover why I am unable to access my assets on the Creative Cloud. CC acts as if my membership isn't current, in that I see a folder of mine, but when I click on it, it disappears. After an hour with support I was unceremoniously disconnected and don't have the fortitude right now to start over again. Is there any chance of speaking with a U.S. based support person who speaks intelligible English?

    David, thank you for your response. I recognize you as one of the
    helpful people on the forum and gather that you are an Adobe employee.
    With respect to the problem I wrote about: The following morning
    everything was working normally again. During the several days that I
    was having the problem, I did try accessing CC via two different
    computers and on 2 different browsers, all with the same result. My
    impression was that CC was treating me as though I was someone whose
    subscription had lapsed. I could see that the folder I had created for
    image files was there on my screen, but when I clicked to open it the
    folder would disappear. So I'm guessing that CC had incorrectly changed
    my status as a subscriber and then somehow this got corrected. In
    reviewing the forum issues, I haven't seen anyone complain of exactly
    the same problem.
    I would also like to say a word about Adobe support. As a loyal
    purchaser and user of multiple Adobe products for the past 15 years, and
    also as an Adobe shareholder, I find the current trend in support to be
    very disappointing. I have had minimal need for support over the years
    but had always had good service until recently. After subscribing to CC
    I had occasion to seek help from Business Catalyst support which was
    just as frustrating and unhelpful as my attempt to obtain CC support on
    8/3. The forum seems to be able to solve some problems but it can't
    always happen in a timely manner. I fear that the current status of
    Adobe support, if my two recent experiences  are typical, will serve to
    drive customers away from Adobe.
    I do thank you for your interest in my problem.
    John

  • I bought my brand new HP 15 Notebook & now i'm very frustrated with its perfomance.

    Hi, I bought my brand new HP 15 Notebook Pc Model: r204ne less then 1month ago, as i installed my softwares, the perfomance of my laptop is became very very slow, i have done factory reset, deleting tempraroy files, unwanted applications and much more, but still the same problem, i'm very frustrated with its perfomance and also HP.I'm using After Efects CC, Adobe Premiere CC, Sony Vegas Pro 13, FL Studio, Adobe Audiation.i5, 2.20 GHz, 64bit, 4GB Ram, 2 GB Geforce Nvidia, 500Gb, Win 8.1. Now i'm thinking to buy my laptop, I will be very thannkful for your suggestion.And also give suggestion to buy a new laptop which give me perfomance for my purpose.Thank you

    i have same issue i also bought hp 15 notebook 2 months ago.But i have no heavy softwares i have just gta 4 game and some nessacary softwares.kindly help me.i am very frustrated with this laptop because it is very slow with core i5 2.2ghz 4gb ram 2gb nivdia 500gb hdd.please help me guide me.banhien wrote:
    MB-Pak wrote:
    ... . I'm using After Efects CC, Adobe Premiere CC, Sony Vegas Pro 13, FL Studio, Adobe Audiation. ...Hi, You are using all heavy and demanding software, definitely that HP 15 won't help. Please try one of HP workstation machines, they are machines which can do the real works. They are much more expensive than your HP 15 . Regards. 

  • Very frustrated with the battery exchange program

    I'm very frustrated with the battery exchange program. I signed up online, double checked all my information, and submitted. No where on the page did it say that a signature would be required upon delivery. I work during the day, so I'm not home to receive shipments (any package I do receive is just left in the lobby, and it's always been fine--I live in a secure building).
    DHL is refusing to leave the package at the door. Apple refuses to tell DHL that it's ok to redirect the package to my place of employment. My only option, it seems, is to spend almost two hours of my time driving to the DHL location and back (the pickup location isn't even in the same county I live in).
    If anyone has any better ideas, I would love to hear it.
    Thanks,
    Andrea

    If your battery was stolen after it was delivered, I'd bet you'd really get upset. If DHL is anything like UPS, you can sign the receipt telling them to leave the package. Pretty simple.

  • Why does the IPhone 4 get really hot, when you are making a phone call??

    I can't seem to find the answer to this riddle . why does the iPhone 4 get really hot when you are making phone calls or when using face Time ??

    It doesn't.
    There must be an issue with your iphone.
    Have you tried reset?  Restore?
    Have you made an appointment at the genius bar to have them look at it?

  • You are not allowed to continue because your account does not have the proper privileges

    I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.

    there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
    ok. just ran through it:
    go to http://www.adobe.com/ (make sure you have flash turned on)
    click "Your Account" in the upper left corner.
    log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
    click on "View Product Registrations"
    click on "View Adobe branded products registrations"
    if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this:

  • I am trying to watch videos online, but a message saying "You are currently browsing the web with Google Chrome..."

    I have a MacBook Pro, which I just bought in August.
    When I try to watch videos on my computer, a message pops up saying, "You are currently browsing the web with Google Chrome and your Video Player might be outdated." I know it's a pop up, but I don't know how to get rid of it and watch videos on my computer. I did look it up online and I downloaded the TSM Adware Removal Tool, which removed some adware files. Then I also downloaded Bitdefender Virus Scanner from the app store to scan my entire computer - nothing came up.
    Please help me solve this problem. Thanks.

    The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
    You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
    If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
    The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
    After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
    Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
    1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
    2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
    3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
    During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
    Check the router manufacturer's website for a firmware update.
    If you downloaded and installed what you thought was a software update, ask for instructions.

  • Getting an error message: "if you are here, it is probably because your computer's clock is wrong."  Ergo, I can't get to the page I need.  My clock's date and time are right.  After re-booting, went to wrong time zone, which I changed-- still getting msg

    Getting an error message: "if you are here, it is probably because your computer's clock is wrong."  Ergo, I can't get to the page I need.  My clock's date and time are right, but time zone was wrong-- changed & saved it, but still getting error msg

    'Requires=network.target' wasn't in it so I added it but nothing's changed. I've left it in because openVPN does require network.
    As I said, I had this problem with a script so I don't think it's anything specific to openVPN. I had a weird occurrence this morning however. When I started the computer up this morning  openVPN worked just fine. However when the computer rebooted openVPN couldn't resolve the host address again.

  • What do you do when you can't sync your ipod and it tells you that itunes is not compatible with your ipod?

    what do you do when you can't sync your ipod and it tells you that itunes is not compatible with your ipod?

    Upgrade to the newest version of iTunes first to see if that helps.
    B-rock

  • Can you pass a hidden value along with your select option in the form selec

    Can you pass a hidden value along with your select option in the html form select

    Off topic. Locking.

  • If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right

    If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right.

    You can create a folder with the home pages by using "Bookmark All Tabs" to open a specific page.
    You can place that folder on the bookmarks toolbar or use the Bookmarks menu button that you can find in the toolbar palette to get access to that folder easily.
    * Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
    * "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
    * "Bookmark This Page" can be accessed via the right-click context menu of that browser page.

  • Hello,  I am trying to add a book to ADE.  I have previously read it on an Android device using an app called Aldiko.  Now when I try to open it up on my account I am getting the message "the vendor account you are entering is not associated with the item

    Hello,
    I am trying to add a book to ADE.  I have previously read it on an Android device using an app called Aldiko.  Now when I try to open it up on my account I am getting the message "the vendor account you are entering is not associated with the item you are trying to open".   Please help 

    This is the Adobe Reader forum; please ask in the Digital Editions forum.

Maybe you are looking for

  • How to define a dynamic column to count the quarter of each year?

    Lets see the result that now displayed: YEARS MONTHS SUMMONTH SUMYEAR SUMQUARTER 2009 Jan      127994 1766166     449652 2009 Feb      168106 1766166     449652 2009 Mar      153552 1766166     449652 2009 Apr      160329 1766166     438913 2009 May 

  • RSTRAN_DUPREC_CHECK_OFF functionality of programm.

    hi please let me know of functionality about RSTRAN_DUPREC_CHECK_OFF program. Regards, KRishna.

  • Zero Memory Management on a virtual server

    Hello, I hope you can help. I am looking into performance issues on a virtual server that hosts 2 SAP instances. The server is on windows 2003. It has 12GB of RAM and 30GB of paging. PHYS_MEMSIZE on the Dev system is set to 8GB and PHYS_MEMSIZE is se

  • Trouble with Content Security Policy (CSP)

    In the latest Firefox 33 there seem to be an issue with Content Security Policy (CSP) and how it handles url that are url encoded. For instance when some CSP directive is set to like https://mywebsite.com/application/do;jsessiond=1234 - it will get U

  • USB stick inconsistency

    Hi, What might cause a usb stick to work on a macbook air but doesn't work on an iMac? iMac just doesn't see it at all. I also formatted the usb stick  (MS DOS format) on macbook air but the iMac still doesn't see it. Any ideas?