You are no help with only one sentence
I have been using FireFox for years, but recently I have been getting a "TypeError, etc" message. Clearing the message only results in distorting my browser. I have tried every trick you suggested on-line to no avail. If you can't fix this problem, I have no choice but to use another browser.
Help!
Many of "you guys" in this open form are other users like you... it sounds like you have a problem that only Adobe staff can fix
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Similar Messages
-
My itunes account keeps giving me this Error message. "You are signed in with a different Apple ID than previously used with podcasts. Do you want to sync these podcasts subscriptions and stations with "gajppl"" gajppl is my only Apple ID. What do I do?
Please sign out of the iTunes Store by selecting
Store ▹ Sign Out
from the iTunes menu bar. Then sign back in. -
The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library? An ipod can be synced with only one itunes library at a time. Erasing and syncing replace the contents of this ipod with the contents of this itunes library.
I don't know what to do? I should save my library before I replace the contents, but I don't know how to do that! HELP!!See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network
Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario -
HELP! - An iPad can be synced with only one iTunes library at a time....
I had to reinstall Windows 7. After that I reinstalled iTunes. I went to sync my iPad and it says "An iPad can be synced with only one iTunes library at a time. What would you like to do". I really don't want to lose ANYTHING on my iPad. Please tell me how to sync the data on the iPad to iTunes so I don't lose anything.
Thank you!One of the three choices is "cancel" - just click that.
-
An iPhone can be synced with only one iTunes library at a time
I recently bought a MacBook Pro, and I figured it would be pretty simple to move my iPhone to sync with iTunes on the Mac from iTunes on my pc, afterall it is the same program and both are designed for the iPhone.
I have been successful in getting the Contacts and Calendar to sync, but the Music, Applications, Video and a few other things give me this message when I check the sync box:
"The iPhone is synced with another iTunes library. Do you want to erase the iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
Obviously, I don't want to erase everything. Actually, I don't care about Music, Videos, Podcasts or Ringtones as I don't have any, but I do care about Photos and Applications. Actually Photos I can reload too, but I don't want to loose the apps I have purchased with the iTunes App Store.
I even tried going back to the PC and unchecking the Sync boxes on it, hoping this might disassociate it from the phone, but now even on that PC I get the same message.
How do I disconnect phone from the old iTunes and be able to sync it to the new iTunes? This should be simple right?I made an appointment with a Mac Genius and I will say that while it was better than getting to talk to India on a poor quality phone call it was just about as helpful. Sure she was cute and friendly, but I left without my issue resolved and was surprised that I didn't even get a followup from anyone asking about my experience (hence my venting here)
Anyway, I found a solution for my issue here: http://tinyfish.net/2008/07/18/how-to-sync-iphone-with-multiple-computers/
This is a real solution to the issue, and has the benefit that I can do this to as many machines as I need and sync at any of them instead of just one. Hopefully, Apple doesn't delete my response since it truly is the answer to the problem and others might be looking for the same solution. -
Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode: pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion: 5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name="staging.local"/>
<Domain Name="staging.local"/>
<IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys -
Nodes with Only One Lower-Level Node = Hide
Hi everyone
Have anyone present this situation:
Iu2019ve a quey to report inventory aging. It has two hierarchies to show data. In Rows I have Major Markets and in Columns a date hierarchy to show aging Ex: from 0 to 8 months, 9+ and 13+. Of course here I have also value and volume.
Query reports all values for all major markets fine. When I filter one major market, letu2019s say France also brings detailed figures but when I add any drill down in rows all values goes to cero (0).
Te estrange is that if you swap drill down order with major markets or drill down by columns with the same characteristic figures come out again as usual.
I know this sounds like a SAP note but I have not been able to find it either.
Thanks a lot for your help, and of course points will be assignedu2026..
Ps. Important, this happen when option u201CNodes with Only One Lower-Level Node = Hideu201D (this is selected on purpose because there are some repeated nodes in major market hierarchy Ex. France u2013 France and if there is just one value under first node then means that only display of last one is necessary to avoid repeated values).Solution we found is to remove flag "Do not display leaves for inner-nodes in the query", directly on the hierarchy.
Thanks -
SQL query to retrieve families with only one generation from a family db
Hi,
I need to write an SQL query that would select families with only one generation ((which means a person - or a married couple - with kids) or (a person - or a married couple - with parents but no kids)) from a database containing families. The simplified db structure is:
person:
id - int, primary key
siblings:
id
parent_id
kid_id
marriage
id:
husband_id
wife_id
Could anyone please help me? I dont really have any idea how to accomplish that...Hi,
Welcome to the forum!
Assuming that siblings (despite its name) contains only parent-child relationships, and that the parent_id could be either the mother or the father:
WITH got_tree AS
SELECT CONNECT_BY_ROOT s.parent_id AS root_id
, LEVEL AS lvl
FROM siblings s
LEFT OUTER JOIN marriage m ON s.parent_id IN ( m.husband_id
, m.wife_id
START WITH parent_id NOT IN ( SELECT kid_id
FROM siblings
CONNECT BY s.parent_id IN ( PRIOR m.husband_id
, PRIOR m.wife_id
, PRIOR kid_id
SELECT root_id
FROM got_tree
GROUP BY root_id
HAVING MAX (lvl) <= 2
;This will get a list of parents who may or may not have children, but who do not have either parents or grandchildren.
To get their spouses and children (if any) you will have to join this result set to all the other tables. At that point, you can eliminate poeple who do not have ancestors themselves, but are married to people who have more than one generation of ancestors.
The details of how to do that depend on the details of your tables. If you'd like help, then post a little sample data (CREATE TABLE and INSERT statements for all tables) and the results you want from that data.
Edited by: Frank Kulash on Oct 14, 2009 4:05 PM
I'd need sample data in order to test this, of course. -
Importing m2t into iMovie with only one conversion
Ok, so m2t files have been beaten to death in these forums, but I'm still puzzled. Here's my situation. I have a Canon HV20 and only replay the tape once to avoid wear and save time (really?). So I capture to m2ts. Fine. Now I'd like to be able to use these in iMovie with only one conversion. I can convert the stream to a framed (QT) format like AIC. But I'd like to do this just once. Meaning, when I convert clip.m2t to clip.mov I'd like to drag this to iMovie and have iMovie just "copy" an not import/convert. Can I convert to a format where I can just drag to the media folder in the given iMovie project?
For those watching. My toolchain is
1. rewind the tape
2. capture with HDVsplit (win), DVHScap (mac), or whatever
3. split/clip the m2t files with HDVsplit (win) or MPEGstremclip (mac/win), or HDVxDV (mac) and leave as m2t
4. convert the m2t clips I want in my movie to QT+AIC
5. import these QT+AIC .mov clips into iMovie
6. edit
I'd like to optimize 4 and 5. (And by the way, someone should port HDVsplit to mac.)
Thanks,
WLMatti Haveri wrote:
MPEG Streamclip allows you to export as QuickTime with Apple Intermediate Codec (also QT Player can do this but I prefer MPEG Streamclip for these tasks). I think you should set the resolution to 1440x1080 because that's what iMovie uses internally for 1080i.
I did a quick test and iMovie seems to accept such AIC-encoded .mov files directly to its Media folder. But run some tests through your complete workflow before trusting this will work!
Ok this was helpful. If I take 1440x1080 QT/AIC output from MPEGstreamclip, I can efficiently copy the file in the project. Works like a charm and looks great in iMovie. (I can also now take the 1920x1080 QT/AIC output from streamclip and do the same; not sure what change there. I did a test on a 1:24 length mpeg-2 stream. The 1440x1080 with and without deinterlacing were 700MB and 600MB respectively, while the 1920x1080 is at 800MB. So it makes sense to do 1440x1080 since iMovie handles it fine.)
In summary (hope this helps someone), here's what I do:
0a. Macbook with iMovie HD
0b. LaCie macos formated external drive drive (hfs+)
0c. Canon HV20 filmed at 1080i (not sure what do with the 24p cinemode)
1. use DVHScap (mac) to capture the stream from the HV20. This gives file.m2t, for example. This can be viewed with VLC, for example. (on windows use HDVsplit to capture). Copy the m2t file to the external drive.
2. now use MPEGstreamclip to disect the m2t file. use the 'i' and 'o' to mark inputs and outputs and then "save as". Save this as file_clip.ts for example. The .ts is the same as an .m2t file, so save it as either.
3. now you should have 1 or more file_clip.ts depending on how many times you do step 1 and 2.
4. use MPEGstreamclip in batch mode to take the file_clip.ts or m2t files and "export to Quicktime". Select Apple Intermediate Codec as the type compression type. Yank the quality up to 100%. Select 1400x1080 (4:3) as the frame size and click "deinterlace video" (my opinion on the deinterlacing). Save the movie on the external drive as file_clip.mov.
5. now start a new iMovie HD project and save the project to the external drive. Quit iMovie. open-apple-click on the myproject.iMovieProject to "show package contents". After this you can move your file_clip.mov files to the media directory under this package. A move is best since copy does an actual copy. Move just moves a pointer.
6. start up iMovie and view the trash can when prompted ("Some stray files were found in the project...."). Now drag the trash files to the clips area in iMovie.
7. now edit.
This is a nice approach for a couple of reasons. The .m2t files are great storage formats. The conversion from mpeg-2 stream (m2t) to a framed format like QT+AIC (mov) is done +only once+. And the quality is maintained. Also, I can do this all to an external harddrive, which is nice since I'm limited on my macbook.
I don't have HD gear. Currently I archive SD DV to tape and to big harddisks. In the future I would like to continue to archive HD content in its native compressed (non-AIC) form. Obviously this works via DVHScap, right?
Yes. The m2t files are a great archival format. The 1:25 long clip above was only 275MB while the framed formats were 3 times that. The stream saves differences so it's a lot more efficient (but you don't have frames for editing). VLC is also quick as quick for viewing these. DVHScap never drops any packets (mpeg-2) when capture (for me at least). HDVsplit is also great, but only for windows. HDVxDX also worked like a charm.
Well anyway, thanks for the chatter.
Nate -
How use two templantes with only one job ?
I have two templantes and want use with only one job.I use with input one xml data file !!
Is this possible?
Please Help!!
Thanks,
Bruno.I probably missed this one earlier or felt that since it referenced an XML data file that I couldn't provide a definitive answer. I'm still not sure I can because we don't use XML for our data files, but use the "field nominated format".<br /><br />An expansion on Tammy's information:<br /><br />1. use a multi-step job with each <br />b task<br />calling a different MDF.<br />With this correction, it assumes that you either have access to set up the tasks/jobs yourself or can convince your Central administrator to do so. What happens is that TASKA is set up to reference FORMA and TASKB is set up to reference FORMB. Then a job is set up that causes both TASKA & TASKB to be ran. This will likely result in two different print files being sent to the printer. That may or may not be desirable, depending on whether your printer is set up to do something special between each print file (insert separator page, offset, whatever). Personally, I don't recommend this as it can quickly cause an unnecessary proliferation of tasks and jobs (we print 100's of differing form combinations with a single job definition).<br /><br />2. I can't really address this as I didn't even know that a single form could cause another to be called. I would expect that unless the "base" form (say it is FORMA) is to always print with the secondary form (FORMB) it is restrictive and has the potential to cause a proliferation of FORMA files for the various combinations that are to be printed. Maybe it is possible to have logic to check the value of a data field to control what forms get called.<br /><br />3. If you pass the XML file through a translation step and then through the transformation agent (maybe it can be done in a single step) this should work. It does add another step to the job as well as requiring learning to use the transformation agent. Depending on the combination of forms to be printed, you might need a different translation definition for each one, or at the very least have a data field that you can check the value of to determine what ^form commands to put in the output file.<br /><br />4. My recommendation is based on assuming an XML data file has the same capabilities as a field nominated file. Within a field nominated file are various print agent commands, including references to data as well as which forms are to be printed (and a whole bunch of other commands). An XML file should have the same features - I just can't say what they might look like. If your current data file has no "form" reference but depends on the job/task definition you might have to stick with option 1. If it has a "form" reference, then you just need to insert additional references for additional forms. Then it is up to the source of your data (or a transformation agent step) to specify which forms are to be printed. For example, in field nominated format, the file might look like:<br /><br />^job XYZ additional parameters<br />^form FORMA.MDF<br />^field FIELD1<br />data<br />^field FIELD2<br />data<br />^form FORMB.MDF<br />^field FIELD1<br />data<br />^field FIELD3<br />data<br /><br />or it might look like the way our files look:<br /><br />^job XYZ additional parameters<br />^global FIELD1<br />data<br />^global FIELD2<br />data<br />^global FIELD3<br />data<br />^form FORMA.MDF<br />^form FORMB.MDF<br /><br />As you can see in the first example, there is a reference to the form followed by all fields that go on it followed by another form reference with the fields that go on it. This particular method, using all "^field" commands for defining the data requires that data duplicated between the forms be duplicated. (Or, the use of some ^global commands like the following.)<br /><br />In the second example, all data is defined first using the "^global" command followed by all of the form references. This allows for the data to be defined only once. If there is something unique regarding a particular form the field can be ^global at the beginning or it can be ^field <br />b after<br />the ^form reference (similar to the first example).<br /><br />As previously mentioned, the XML file should have the same capability but in XML notation, something like the following (forgive me as it has been years since I took the XML class and don't use it in my daily work so the actual format could be wrong, not to mention the actual labels):<br /><br /><job name=XYZ,option=aaaa,option=bbbbbbb><br /> <form name=FORMA.MDF><br /> <field name=FIELD1, value=xxxxxxxxxxx></field><br /> <field name=FIELD2, value="xxxxxxxxxxxxx"></field><br /> </form><br /> <form name=FORMA.MDF><br /> etcetera<br /></job><br /><br />or maybe:<br /><br /><job name=XYZ,option=aaaa,option=bbbbbbb><br /> <global name=FIELD1,value=xxxxxxxxxxxx></global><br /> <global name=FIELD2,value="xxxxxxxxxxxxx"></global><br /> etcetera<br /> <form name=FORMA.MDF></form><br /> <form name=FORMB.MDF></form><br /></job><br /><br />or even (but I doubt it):<br /><br /><job name=XYZ,option=aaaa,option=bbbbbbb><br /> <globals><br /> name=FIELD1,value=xxxxxxxxxxxxxxxx,<br /> name=FIELD2,value="xxxxxxxxxxxxxxx"<br /> </globals><br /> <forms><br /> name=FORMA.MDF,<br /> name=FORMB.MDF<br /> </forms><br /></job>
-
How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
A couple of other items:
1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
I hope someone can help, I am having a very difficult time trying to obtain answers. AngieThe iphone/ipod is NOT a storage/backup device. Not maintaining a backup copy is a big mistake.
You can transfer itunes purchases from your iphone/ipod to your computer:
Authorize your computer for all accounts and then click File>Transfer Purchases -
How to connect many devices with only one FW800 port in iMac?
Hi,
I am upgrading to a new Intel iMac from a 2004 vintage Dual2.0GHz PowerMac. I currently have 8x d2 Quadra drives chained by FW800, and 2x Iomega drives connected vis FW400 hub which also connects HD cams.
My questions is that with only one FW800 port in iMac, I think my devices connectivity is the following?
(1) Get a FW 800 hub (I can only find 2 port ones at the Apple store and BestBuy)
(2) Connect the d2 Quadras to one port of the FW800 hub
(3) Get a FW 800 to FW 400 cable
(4) Connect my 6 port FW400 hub to the 2nd port of the FW800 hub
Thanks for reviewing this solution, and I would also appreciate other suggestions or hear about your experiences if you have a similar set-up.
WillIn addition to your listed considerations, you should consider the following.
Many storage needs do not required FireWire 800 speed. For example, USB 2.0 works fine for your Time Machine backup drive. If you are just storing user data such as your iPhoto or iTunes media files, USB 2.0 is more than fast enough. So, as much as possible, if any of those external drives have USB 2.0 connections and the data storage does not need FireWire 800 speed, offload as much as possible to USB 2.0. I used to be a +FireWire snob+, but since getting an Intel iMac, I find that USB 2.0 works quite well for most data storage purposes.
There are new hard drives that are power efficient and as large as 2TB. Consolidate your data storage needs onto a smaller number of very large drives, partitioned as needed. This will make your setup more reliable (smaller number drives), and save reduce power consumption. If any of your current externals are SATA, you can probably replace the existing drive with an extra large one.
So, I think you setup should be, extra large FireWire 800 drive connected to the FireWire 800 port directly. Using a 9-pin to 6-pin cable, connect the FireWire 400 hub. Connect any non-storage FireWire 400 devices there. Do some data transfer testing to make sure having the 400 hub there on the chain does not cause the 800 connection to slow down.
Connect other drives as needed using USB 2.0, existing or new. Retire the smaller of your external drives. -
How to make 1D Array but with only one element filled in Real Time
Hi folks,
here I am with another question. I want to implement an prediction discrete state space observer which is going to run on a CRIO real time target. I am going to do it just like in the example which comes with LV.
I have some questions regarding the input and outputs which in the example those are "dummy".
My model is a SISO model, but the function "Construct SS model" returns parameters (A,B,C,D Matrices) as 2D arrays, so once you connect the cluster model into the Discrete Observer model, it takes y and u as 1D arrays despite of the fact that there is a SISO model.
I realized that the function I am using in the simulations, uses 1D arrays but with only one element filled:
Does anyone knows how to implement such 1D arrays in Real Time? I guess the way to do it is preallocating one array of zeros of size 1, and then recirculating it through some SR, and replacing the element with my real input and output, but at the dummy.vi, they are using a simple "build array"
function.Ok, I did it that way. But I am facing another problem right now...
At some point the Discrete Observer return a NAN array, you will see the code in the code snippet?
I get rid of that component by component, but the observer gets "stuck" in it. So my Control law is zero... but the state stimate is NAN.
Also I am attaching the VI.
I do not know why, since in the simulation program all runs well. any thoughts? Maybe the internal numeric precision of the State Space Model?
Attachments:
RT - Pole Placement + Complete Observer.vi 40 KB -
SQL Server 2012 Undetected Deadlock in a table with only one row
We have migrated our SQL 2000 Enterprise Database to SQL 2012 Enterprise few days ago.
This is our main database, so most of the applications access it.
The day after the migration, when users started to run tasks, the database access started to experiment a total failure.
That is, all processes in the SQL 2k12 database were in lock with each other. This is a commom case of deadlock, but the Database Engine was unable to detect it.
After some research, we found that the applications were trying to access a very simple table with only one row. This table has a number that is restarted every day and is used to number all the transactions made against the system. So, client
applications start a new transaction, get the current number, increment it by one and commit the transaction.
The only solution we found was to kill all user processes in SQL Server every time this situation occurs (no more than 5 minutes when all clients are accessing the database).
No client application was changed in this migration and this process was working very well for the last 10 years.
The problem is that SQL 2k12 is unable to handle this situation compared to SQL 2k.
It seems to occurs with other tables too, but as this is an "entry table" the problem occurs with it first.
I have searched internet and some suggest some workarounds like using table hints to completely lock the table at the begining of the transaction, but it can't be used to other tables.
Does anyone have heard this to be a problem with SQL 2k12? Is there any fixes to make SQL 2k12 as good as SQL 2k?First off re: "Unfortunatelly, this can't be used in production environment as exclusive table lock would serialize the accesses to tables and there will be other tables that will suffer with this problem."
This is incorrect.
Using a table to generate sequence numbers like this is a bad idea exactly because the access must be serialized. Since you can't switch to a SEQUENCE object, which is the correct solution, the _entire goal_ of this exercise to find a way to properly
serialize access to this table. Using exclusive locking will not be necessary for all the tables; just for the single-row table used for generating sequence values with a cursor.
I converted the sample program to VB.NET:
Public Class Form1
Private mbCancel As Boolean = False
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim soConn As ADODB.Connection
Dim soRst As ADODB.Recordset
Dim sdData As Date
Dim slValue As Long
Dim slDelay As Long
'create database vbtest
'go
' CREATE TABLE [dbo].[ControlNumTest](
' [UltData] [datetime] NOT NULL,
' [UltNum] [int] NOT NULL,
' CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
' [UltData] Asc
' )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 80) ON [PRIMARY]
' ) ON [PRIMARY]
mbCancel = False
Do
' Configure the Connection object
soConn = New ADODB.Connection
With soConn
.ConnectionString = "Provider=SQLNCLI11;Initial Catalog=vbtest;Data Source=localhost;trusted_connection=yes"
.IsolationLevel = ADODB.IsolationLevelEnum.adXactCursorStability
.Mode = ADODB.ConnectModeEnum.adModeReadWrite
.CursorLocation = ADODB.CursorLocationEnum.adUseServer
.Open()
End With
' Start a new transaction
Call soConn.BeginTrans()
' Configure the RecordSet object
soRst = New ADODB.Recordset
With soRst
.ActiveConnection = soConn
.CursorLocation = ADODB.CursorLocationEnum.adUseServer
.CursorType = ADODB.CursorTypeEnum.adOpenForwardOnly
.LockType = ADODB.LockTypeEnum.adLockPessimistic
.Open("SELECT * FROM dbo.ControlNumTest")
End With
With soRst
sdData = .Fields!UltData.Value ' Read the last Date (LOCK INFO 1: See comments bello
slValue = .Fields!UltNum.Value ' Read the last Number
If sdData <> Date.Now.Date Then ' Date has changed?
sdData = Date.Now.Date
slValue = 1 ' Restart number
End If
.Fields!UltData.Value = sdData ' Update data
.Fields!UltNum.Value = slValue + 1 ' Next number
End With
Call soRst.Update()
Call soRst.Close()
' Ends the transaction
Call soConn.CommitTrans()
Call soConn.Close()
soRst = Nothing
soConn = Nothing
txtUltNum.Text = slValue + 1 ' Display the last number
Application.DoEvents()
slDelay = Int(((Rnd * 250) + 100) / 100) * 100
System.Threading.Thread.Sleep(slDelay)
Loop While mbCancel = False
If mbCancel = True Then
Call MsgBox("The test was canceled")
End If
Exit Sub
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
mbCancel = True
End Sub
End Class
And created the table
CREATE TABLE [dbo].[ControlNumTest](
[UltData] [datetime] NOT NULL,
[UltNum] [int] NOT NULL,
CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
[UltData] Asc
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
) ON [PRIMARY]
go insert into ControlNumTest values (cast(getdate()as date),1)
Then ran 3 copies of the program and generated the deadlock:
<deadlock>
<victim-list>
<victimProcess id="processf27b1498" />
</victim-list>
<process-list>
<process id="processf27b1498" taskpriority="0" logused="0" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1970" ownerId="3181" transactionname="implicit_transaction" lasttranstarted="2014-02-14T15:49:31.263" XDES="0xf04da3a8" lockMode="X" schedulerid="4" kpid="9700" status="suspended" spid="51" sbid="0" ecid="0" priority="0" trancount="2" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="21152" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3181" currentdb="35" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128058">
<executionStack>
<frame procname="adhoc" line="1" stmtstart="80" sqlhandle="0x020000008376181f3ad0ea908fe9d8593f2e3ced9882f5c90000000000000000000000000000000000000000">
UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </frame>
<frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
unknown </frame>
</executionStack>
<inputbuf>
(@Param000004 datetime,@Param000005 int)UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </inputbuf>
</process>
<process id="processf6ac9498" taskpriority="0" logused="10000" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1971" schedulerid="5" kpid="30516" status="suspended" spid="55" sbid="0" ecid="0" priority="0" trancount="1" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="27852" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3182" currentdb="35" lockTimeout="4294967295" clientoption1="671156256" clientoption2="128058">
<executionStack>
<frame procname="adhoc" line="1" sqlhandle="0x020000003c6309232ab0edbe0a7790a816a09c4c5ac6f43c0000000000000000000000000000000000000000">
FETCH API_CURSOR0000000000000001 </frame>
<frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
unknown </frame>
</executionStack>
<inputbuf>
FETCH API_CURSOR0000000000000001 </inputbuf>
</process>
</process-list>
<resource-list>
<keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
<owner-list>
<owner id="processf6ac9498" mode="S" />
<owner id="processf6ac9498" mode="U" requestType="wait" />
</owner-list>
<waiter-list>
<waiter id="processf27b1498" mode="X" requestType="convert" />
</waiter-list>
</keylock>
<keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
<owner-list>
<owner id="processf27b1498" mode="U" />
<owner id="processf27b1498" mode="U" />
<owner id="processf27b1498" mode="X" requestType="convert" />
</owner-list>
<waiter-list>
<waiter id="processf6ac9498" mode="U" requestType="wait" />
</waiter-list>
</keylock>
</resource-list>
</deadlock>
It's the S lock that comes from the cursor read that's the villian here. U locks are compatible with S locks, so one session gets a U lock and another gets an S lock. But then the session with an S needs a U, and the session with a U needs an
X. Deadlock.
I'm not sure what kind of locks were taken by this cursor code on SQL 2000, but on SQL 2012, this code is absolutely broken and should deadlock.
The right way to fix this code is to add (UPDLOCK,SERIALIZABLE) to the cursor
.Open("SELECT * FROM dbo.ControlNumTest with (updlock,serializable)")
So each session reads the table with a restrictive lock, and you don't mix S, U and X locks in this transaction. This resolves the deadlock, but requires a code change.
I tried several things that didn't require a code, which did not resolve the deadlock;
1) setting ALLOW_ROW_LOCKS=OFF ALLOW_PAGE_LOCKS=OFF
2) SERIALIZABLE isolation level
3) Switching OleDB providers from SQLOLEDB to SQLNCLI11
Then I replaced the table with a view containing a lock hint:
CREATE TABLE [dbo].[ControlNumTest_t](
[UltData] [datetime] NOT NULL,
[UltNum] [int] NOT NULL,
CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
[UltData] Asc
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
) ON [PRIMARY]
go
create view ControlNumTest as
select * from ControlNumTest_t with (tablockx)
Which, at least in my limited testing, resovlved the deadlock without any client code change.
David
David http://blogs.msdn.com/b/dbrowne/
Maybe you are looking for
-
Issue with Safari and using the back arrow with multiple tabs open
I open multiple tabs in Safari but when I'm in a tab browsing and I hit the back arrow, in the new version of Safari, it doesn't just go back to the previous page in the tab, it completely backs out of all the tabs. What am I doing wrong? I have a PC
-
Help, can't see older pictures in iPhoto
In my iPhoto library on the most recent events and pictures can be seen. By recent I mean mid 2010 onwards. The ones I can't see date back to 1999. These have blank thumbnails and when I click on an image - nothing. Information like event name and da
-
I have been having problems logging in and had to go to system set not quite knowing what I am doing I sent and changed to configure default, then when I went in my plugin crashed so I tried to update java again an got the above area message,Runtime
-
Purchases were made from my iphone that were not made by me and they totaled $371.07. Is there anything that I can do about this. I think I know how it happened.
-
How to set HTTP_ACCEPT_LANGUAGE
Hello i have my HTTP_ACCEPT_LANGUAGE set to fr , how can i set it to en-us to solve problems related to file upload Is there any menu driven procedure or command line? Thanks Sidaty