You are not authorized to change data in sales area

Hi,
I started getting a BDOC error stating "You are not authorized to change data in sales area O 5000022/01"  This is preventing the customer from replication into CRM from R/3.  Any clues on how to address the issue? 
Thanks,
Stephen Brewer

Thanks Robert,
I originally went that route but the BDOC error message give no indication of what account "You" refers too.  Guess I will try and track it down on the R/3 side but I find it surprising that security is that granular since this is a middleware function.  I would think authorization to manage the customer data in R/3 would be enough.  Master Data folks who maintain data in R/3 side all have same role in CRM as well.  Thanks for the lead, I will get back.
Stephen

Similar Messages

  • You are not authorized to change the sales employee

    Hi everyone ,
    when I add an new bussiness partner not with the default sales employee ,I can't finish adding except  loging on the system using manager or superuser before. the system tells that "You are not authorized to change the sales employee". This problem had been raised by someone else already,But It still confused me .I have explored the problem in b1 system and has got these results like following:
    first ,there are three places where we can set default Salse mployee.        
               Path1     Administation/Setup/General/Sales Employees
            or  Path2   Human Resources/Employee Master Data/Sales Employee
            or   Path3  Administation/Setup/General/Users/Defaults/New/Defaults/Sales Employee
    If you add a new BP , the default Sales Employee will get the value from Path3 .
    If it is empty from Path3 ,it will get the value from Path2.
    If it is also empty from Path2,then it will get the value from Path1.
    There is Only one conditon that In Employee Master Data ,the employee is related with User and Sales Employee.
    My question is that since I connected employee with User I can't change the sales employee when adding a new BP.
    Another question is that since I connnected sales employee(Mike) with employee(Jone) I can't select the sales employee (Mike) as a sales employee when adding a new BP using other user loging on the system.
    There Is no problem if I  connect no employee with User.But If I do so ,How Can I do the Data Ownership Authorization.
    Edited by: Li Mishan on Apr 17, 2008 9:40 AM
    Edited by: Susanne Klemm on May 7, 2008 2:00 PM
    Edited by: Philip Eller on May 21, 2008 9:02 AM

    I forget to say that I had already give the user all Authorizations.I have copy the authorization from manager.
    One thing I am sure that :
    If you connet the sales employee with one employee,that means that sales employee can be only used by the user connected to the employee at the same time.others can't use it.
    If you connet the user with employee,that means ,when log on the system with the user,you can only use the sales employee that you connected with employee at the same time.you can't use others
    Edited by: Li Mishan on Apr 17, 2008 10:55 AM

  • "You are not authorized to change users in user group XY"

    Hello,
    I ran a report. Within that report, a BAPI is called. It's name is user_change.
    That BAPI enables you to change user details like passwords and so on...
    When I tried to change the user's password, an error message occured.
    "You are not authorized to change users in user group XY"
    The user belongs to the group XY.
    After an unsuccessful pwd change, there is no SU53 file!
    So how could I solve that?
    Could I explicitly define for which user groups, passwords can be changed?
    Any other ideas?
    Thanks a lot in advance,
    holger

    Hi Holger,
    May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details.

  • BAPI_NETWORK_MAINTAIN for UPDATE ACTIVITY-CN 307-You are not authorized to

    Hi all,
    sorry for disturb,
    I have a problem and I don't understand why....
    I use BAPI_NETWORK_MAINTAIN with simple code.
    I have tried with SE37 with the same values and it correctly update the activity. without error messages.
    but with the same values in the program  returns me an error message and it doesn't update the data:
    E CN 307 You are not authorized to change activity or element S11021201 0108
    I have a USER with SAPALL.....
    DATA: i_method_project  LIKE bapi_method_project         OCCURS 0 WITH HEADER LINE.
    DATA: i_activity               LIKE bapi_network_activity       OCCURS 0 WITH HEADER LINE.
    DATA: i_activity_update  LIKE bapi_network_activity_up OCCURS 0 WITH HEADER LINE.
      i_method_project-refnumber                     = 000001.
      i_method_project-objecttype                     = 'NETWORKACTIVITY'.
      i_method_project-method                          = 'UPDATE'.
      i_method_project-objectkey                       = 'S110202010108'.
      APPEND i_method_project. CLEAR: i_method_project.
      i_method_project-method                          = 'SAVE'.
      APPEND i_method_project. CLEAR: i_method_project.
      i_activity-network                                     = 'S11020201'.
      i_activity_update-network                        = 'X'.
      i_activity-activity                                       = '0108'.
      i_activity_update-activity                          = 'X'.
      i_activity-control_key                                = 'PS01'.
      i_activity_update-control_key                   = 'X'.
      i_activity-duration_normal                         = 8,5.
      i_activity_update-duration_normal            = 'X'.
      APPEND i_activity. CLEAR: i_activity.
      CALL FUNCTION 'BAPI_NETWORK_MAINTAIN'
        IMPORTING
          return                                 = return
        TABLES
          i_method_project                = i_method_project
          i_activity                             = i_activity
          i_activity_update                = i_activity_update
          e_message_table               = e_message_table.
    thx in advance all
    Regards
    Marco Echino.
    Edited by: Marco Echino on Jun 22, 2011 5:04 PM

    Hello Marco,
                        To get more details you need to debub the both options as in the logic SAP is calling another report "R_BAPI_NETWORK_MAINTAIN" using submit statement inside the FM "BAPI_NETWORK_MAINTAIN".
    And also befor the submit statement they gad used the EXPORT statement to save the data to the SAP memory.
    Inside the Report  BAPI_NETWORK_MAINTAIN" SAP logic is calling the FM "2002_NETWORK_MAINTAIN" for doing the update.
    So if the Export memory content gets changed due to another execution then the returm value may get changed and end up with conflicts.
    So better you need to debub the both scenarios (SE37 & from program call).
    You can knock out the problem you are facing.
    Hope this answers your question.
    Thanks,
    Greetson

  • I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

    I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

    Hello there DesertRat71,
    I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
    In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
    All the best,
    Sterling

  • You are not authorized to display the data transfer process

    Dear Experts,
                          Good Morning!
                          I want to that I am getting one Message no. RSM906:"You are not authorized to display the data transfer process
    ".What does it mean .I want to load the data in the 0SD_C03 cube ,can able to load upto PSA but unable to create the DTP.IS this because of this messege of authorization or some other reason ,Request  you to please suggest me for this issue ,thanks in advance .

    Hi,
    You may not have authorisation for S&D cubes, so i feel it is an authorisation issue, kindly take one of your colleagues id to check this, if it is working for them, then i think you have to add those to roles to your ID..
    Still there is a option to override this, but you have debug it once, and change the authorisation code(sy-subrc) value, and please dont try this if you are not familiar at ABAP, and this is not adviceable if it is an authorisation issue as there will be logs recorded for all the things you are doing and oreover each time when u click on DTP you have debug it to change the authorisation
    code..
    Note: If it is QA or Dev system you can try debugging it, but if it is production system then i think u have to use an alternate ID...
    Regards,
    Nanda.S

  • You are not authorized to make changes

    When I try to do in change mode for the
    screen 0220 (Modified/Active), I am getting following error message:-
    ========================
    START OF ERROR MESSAGE:
    =======================
    You are not authorized to make changes
    Message no. 37202
    Diagnosis
    You have no authorization for the authorization object 'S_DEVELOP',
    which would allow you to change the screen concerned.
    There is also a second possibility:
    You want to edit a modified SAP screen in a customer system after an
    upgrate (SAP transport). The screen remains locked for editing until
    the new SAP version and the customer version have been aligned
    (Transaction SPAU).
    System Response
    Authorizations are assigned to users in profiles. Profiles are stored
    in the user master record.
    Procedure
    Comsult your system administrator.
    =======================
    END OF ERROR MESSAGE:
    =======================
    For your reference, when i try to open another screen 0100 (Active), i
    am able to modify.
    Kindly solve this issue to proceed further.
    With Thanks & Regards
    Bhushan

    Hello,
    Thanks for your information.
    The Said Screen 0220 has been modifed earlier. But now, duing Pach Apply of SAP_APPL  SP15, I have skipped the set to original for the said screen. Now  I have done that using SPAU and I am able to modify the said screen.
    With Regards
    Bhushan

  • You are not authorized to open the form ORA-01403: no data found

    Hi,
    I have created a new Oracle 10g forms. It compiles sucessfully but when it is opened it gives a error message : You are not authorized to open the form ORA-01403: no data found.
    I am already connected to database. Can anyone please help what is the reason for this issue and any possible resolution?

    Sounds like you have some kind of security enabled.  However, because you didn't share the details about your environment or what you are doing there isn't much we can do is guess.
    Exactly which Forms version are you using?
    Exactly which database version are you using?
    Are you using anything like Oracle E-Business (e.g. template.fmb)?
    Did you create the form with Oracle Designer?
    If you create a simple form using only the DataBlock and Layout Wizards against the Oracle demo schema (SCOTT), does this form run?
    Any additional details outlining what you are doing or have already done might be helpful.

  • You are not authorized to execute this application in SAP E-Recruit

    Hi,
    We are getting the below error while going to recruitment page for recruiter:
    "You are not authorized to execute this application"
    At the same time when we check in SLG1, we get the below errors:
    No candidate could be found for US E0023127
    The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 361
    Apart from this we are not getting any dumps/traces in ST22/ST05/ST01.
    When we encountered this error for the first time, we executed the report RCF_CREATE_USER in SE38 and the problem was resolved.
    We got the error again 2 days back, after that also it got automatically resolved. But, now we are getting this error continuously.
    We also tried re-executing the report RCF_CREATE_USER and HRALXSYNC but no use.
    The service user (for recruiter) is a reference user from RCF_CAND_INT.
    We have also tried giving different roles and authorizations to the user.
    SAP_ERC_RECRUITER_CI_4
    SAP_RCF_RECRUITER
    SAP_ERC_REC_ADMIN_CI_4
    SAP_ALL
    We are in ECC 6 EHP 6 and we have a standalone EREC system with ERECRUIT 617 SP3.
    We are stuck at this point in our EREC project.
    Kindly provide your valuable suggestions for this issue.
    Thanks in advance!
    Regards,
    Khushboo

    Hello Khushboo,
    the message you are getting is a bit misleading as it is the standard behavior of the quick search if the user you are logged in as recruiter does not have a candidate assigned. So the message in SLG1 points into the correct direction.
    I am not sure what you are meaning by "the service user (for recruiter)". Although table T77RCF_ROLE allows to specify a reference user for all roles in eRec only the entries for internal and external candidates are actually used. So the authorization assignment for the recruiter specific roles has always to be done directy for each user. A reference user could be overwritten / reset to RCF_CAND_INT by the ALE.
    What bothers me a bit is the user name and that you mention RCF_CREATE_USER and HRALXSYNC at the same time. This might be the reason for your issue. Looks like you created a candidate for a user using RCF_CREATE_USER which is later transferred in the ALE from HR Core to eRec. This was not a good idea. RCF_CREATE_USER is only for creating project users when the HR core to eRec and for special users who need a candidate while do not have an employee id in HR core (e.g. WF-BATCH). This is why I always recommend to use non-production user Ids for everyone during project phase. Its been quite a time some of my projects did otherwise and I remember a similar issue with one of the customer admins. Everytime data for the user / employee was send in ALE the candidate / user was messed up.
    Getting this fixed was quite troublesome. In the end we had to dump the original candidate. We deleted all records between candidate object, central person, business partner and person object in HRP1001. By that time the customer was still on the old ALE version so today I would also delete all entries in HRP558X infotype tables for the employee. Then I would first try to finger the employee id (e.g. change the name, save, directly change it back, save again ) so it is transferred during the nightly processing of the change pointers and put in the IDoc. If this is not working I would try to transfer it again using PFAL.
    Kind Regards
    Roman     

  • You are not authorized to logon to the target system error code1(in SM58)

    Hi Basis Gurus,
    In my test system Idocs are in error status.
    When I check tRFC monitering in SM58, there are several Idocs are strucked.
    Status Text: You are not authorized to logon to the target system  (error code 1).
    Recently we have refreshed our test system with production data.
    Before system refresh it was normal.
    The RFC connection is also working fine.
    Please suggest the solution as I'm struck in this issue.
    I'm a Basis Guy.
    Thanks & Regards,
    Ravi.

    Hi,
    Change the RFC user password in target system however there are 2 tests to analyse from SM59 :
    1) RFC Connection test
    2) Authorization Test
    And i guess you have only tested the 1st one from the RFC(SM59) check whether you can succeed with option 2 if not then you may need to change the password.
    Thanks,
    Salim

  • When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

    When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

    If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
    The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
    As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
    Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
    dscl . read /Users/<username>
    (where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
    sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
    (where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
    Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

  • Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

    For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
    Thanks.

    Try:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

  • How do you find out which files are not authorized?

    All of a sudden, out of the blue, I start getting this message :
    Some of the Audible files in the iTunes library were not copied to the iPod “iPod” because you are not authorized to play them on this computer.
    Well first of all - all of the music I've bought in the last 4 years have come from iTunes so why this comes up now all of a sudden is beyond me.
    Computer hasn't changed.
    Same old iPod touch (1st gen) I've been using for several years now. The last time I tried to sync it was probably a few weeks ago (with no problems).
    I thought I'd look to see if say the past 10 songs I've purchased are on the iPod (which goes back several months)... they are.
    So I thought - ok let's see if I get a problem syncing my iPhone and my iPad. Nope - no problems there.
    I'm stumped.
    It would be nice if I could even get a list of the files it claims can't be synced to the iPod, that would be a good starting point to diagnose the problem, but I can't figure out even how to get that.
    Help!

    PunkStar Studios wrote:
    Some of the Audible files ...
    if you're seeing that error, it has nothing to do with purchased content from the iTunes store.
    Audible is an online store that sells Audiobooks. The audiobooks purchased from Audibooks work the same way as the songs purchased from iTunes. You can only play the audiobooks on a limited number of computers.

  • You are not authorized to read entries in the cash journal

    Error while trying to access Cash journal " You are not authorized to read entries in the cash journal ".

    Hi Holger,
    May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details.

  • Getting error message " You are not authorized to access the migration tool "

    One of the users is noticed with error message " You are not authorized to access the migration tool " in SAP Cloud for Customer tenant. thanks

    Hello Raj,
    It seems that this user does not have proper authorization to perform Data Migration.
    You need to go to the WorkCenter View Assignment for this user under his access rights & need to assign him the workcenter "Business Configuration" & under it, also assign him relevant access to Data Migration.
    This shall fix the issue & the user shall not get this error while trying to perform Data Migration.
    Steps:
    1. Go to Workcneter: "Application and User Management => Business Users => Seerach for the suer who gets this error => Edit-> Access Rights => Click on Workcenter view Assignment tab & assign the above mentioned worokcenter access and save."
    Let me know for any further queries.
    BR
    Ankur

Maybe you are looking for