"You are not authorized to download selected object" when trying to download SAP Kernel 7.21 EXT PL 500 with DL

Hello everyone,
Yesterday (April 30, 2015) SAP released the new patch 500 for SAP KERNEL 7.21 EXT 64-bit.
I am using Download Manager and I was able to download the Kernel Part II (DB-Dependent) .SAR file and other files as you can see in the screenshot, but for the Kernel Part I and disp+work files I get the error: "You are not authorized to download selected object".
On the other hand, I am able to download older versions of the Kernel Part I (SAPEXE_XXX.SAR).
Is this a technical problem on SAP side (SMP)? Did anyone encounter the same issue and found a solution?
Thanks.
BR,
Michel

Hello Michel,
Kernel Patch 500 is yet to release, to the customer.
Have a look at the below blog.
Surprise for Kernel version 7.21 patch level 500 !
Hope the above one helps.
regards,
pavan

Similar Messages

You are not authorized to access the function Projects: Worklist. Please co

Hussein,
I enabled the multi - org, upgraded R12 from 11i. I try to login into Application, I am getting an error
You are not authorized to access the function Projects: Worklist. Please contact your System Administrator.
This could be multi - org issue? Please let me know.
Thanks
Prince

Hi Prince,
Hussein,
I enabled the multi - org, upgraded R12 from 11i. I try to login into Application, I am getting an error
You are not authorized to access the function Projects: Worklist. Please contact your System Administrator.
This could be multi - org issue? Please let me know.
Thanks
PrincePlease check apache log files for details about the error (error_log* and access_log* files).
Is this happening to all users?
Did you enable Multi-Org successfully with no errors?
After Upgrade to 12.1, unable to Login with You are not authorized to access the function Applications Default Login Page [ID 1368800.1]
You Are Not Authorized To Access This Function When Using Iexpense [ID 295907.1]
Thanks,
Hussein

"you are not authorized to access the function" issue

Hi folks,
I have a issue when I tried to include rich content container in one OA page. I defined the function according to the dev guide. Then the page shows error as "You are not authorized to access the function XXX. Please contact your System Administrator". Now the OA application has Application Short Name as SYSADMIN and Responsibility as SYSTEM_ADMINISTRATOR. And I defined the function under System Administrator->Application->Function. Any suggestion for this issue is appreciated.

Hi Prince,
Hussein,
I enabled the multi - org, upgraded R12 from 11i. I try to login into Application, I am getting an error
You are not authorized to access the function Projects: Worklist. Please contact your System Administrator.
This could be multi - org issue? Please let me know.
Thanks
PrincePlease check apache log files for details about the error (error_log* and access_log* files).
Is this happening to all users?
Did you enable Multi-Org successfully with no errors?
After Upgrade to 12.1, unable to Login with You are not authorized to access the function Applications Default Login Page [ID 1368800.1]
You Are Not Authorized To Access This Function When Using Iexpense [ID 295907.1]
Thanks,
Hussein

"You are not authorized to edit the chosen object" in LWE

Hello gurus,
I want to edit the standard HTML content that is delivered with Life and work events. Before editing this, i want to copy the ESS HTML content package to a custom folder and then edit and modify as per my requirements. i navigated to Life an work events - US --> HTML content --> Content Package --> ESS HTML Content Package and clicked on Open. I am getting the error "You are not authorized to edit the chosen object".
How do I access this content without any error? Do I need any specific roles to be able to access this content? i need to access this content to be able to copy and paste it to a custom folder.
Also, when I tried copying at the ESS HTML content Package level and then pasting it into a custom folder, i get a popup with all empty rows and columns and there are two buttons OK and CANCEL.
How do I copy this ESS HTML content package to a custom location?
please suggest .
An update: Since I could not open/edit the standard ess html content package, I created my own HTML files from scratch and created a content package and uploaded my html files and folders into the custom content package. Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events.
How do I achieve this? What else is needed to call these html pages from the event?
Please suggest and any help is really appreciated.
Thanks,
Maria Kutty Somori.....
Edited by: MariaKutty on Jun 24, 2011 1:01 AM
Edited by: MariaKutty on Jun 24, 2011 1:05 AM

Hello Maria,
I too tried earlier for copying these HTML content and paste them in my custom folder and then modify them....
But I too faced the similar error as of yours.
I dont' know the reason why this happens....I guess SAP does not allow you to modify there content.
Nyways, there is always a workaround solution....
You are spot on when you say...You are creating new HTML files from scratch.....but you dont' need to create from scratch !!
You can still get these files.
1. Check Directory Structure : Navigate to Life and work events - US folder in GP design time -> HTML Content -> Content Package -> ESS HTML Content Package and click on "Open" then click on content tab..
Here you can view all the content files supplied....additionally please note that there are two folders "CSS" and "Images".
If you wish to create your own content from modification to SAP supplied content...then make sure in your own package these folders are also with similar directory structure.
2. Come out of gallery and as an end user Open your life and work events page that you wish to modify.
For e.g. ESS -> Life and Work events -> My First Days -> New Hire Checklist.
3. Right click on HTML page and click on Properties.
4. Copy the Address/URL of page.
It will be something like :
http://Host:Port/gpcore/ctpkg/094BABAA643911E091070000014B8BFA/NewHireCheckList.html
5. Access above URL directly from Browser (In new window) and refresh that opened page. Check that all the content is visible and in correct font and format.
6. Click on "Page" -> Save As...from your browser tool bar.
7. From "Save as type" select HTML complete....
and save the page.
8. As a result you will get an HTML file and a folder.
Inside the folder there will be your images and CSS....Now you know how to make your own content.......
Very Important : Please note that directory structure of your CSS images and HTML must be similar to what you saw in point 1.
And you can easily modify your content...accordingly...
Now the second part of your question :
"Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events. "
I hope you refer to something that is given by SAP in the form of " ESS -> Life and Work events -> My First Days -> New Hire Checklist"..
As you can see "New hire checklist" is the First link available under My first days...thus by default it gets displayed when user clicks on "My first days"....
Is this that you want to mimic ?
Well for that your process in GP design time must look like this :
http://img594.imageshack.us/img594/7/imageqw.png
For eg. Create a new callable object with name "New Hire Checklist" of type : "Content package"..
Wizard will help you with the rest.
Revert back if you face any issues.

You are not authorized to display the panel for selecting a power plan

I'm running Windows 7. Installed "Power Manager" via System Update 4.0 last night (10/23/2009). Getting this error when hitting FN+F3.
You are not authorized to display the panel for selecting a power plan.
Furthermore, I'm unable to see any of the default power schemes. Finally, I created two new power schemes, neither of them display for selection.
Any one else experiencing this issue?!?!?

Welcome to the forum!
Hmm... That seems odd. Does the userid that you're using have admin rights to the machine?
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

You are not authorized to save lists in local

Dear Sir,
We want to give access to user to save a report on local disk or many transactions is for monitoring display reports, for such transaction codes. Because :
It is showing following error :
You are not authorized to save lists in local
files (SY-SUBRC 12)
We want to give access to save report on local disk file.
Please guide us how to give access for same.
which T code access we have to provide for ?
Thanking You,
Vijay Vadgaonkar
Varroc Engineering Pvt. Ltd.

Dear
This is due to authorization failed. you should provide authorization to object S_GUI and should provide avtivity 61 then you can do that.
other wise you can check the roles which can be done using SUIM --> ROLES --> Roles by complex Selection Cri --> [provide arthorizarion object S_GUI] >> then execute
find the role what you want then add.
reg
priyanshann

You are not authorized to execute this application in SAP E-Recruit

Hi,
We are getting the below error while going to recruitment page for recruiter:
"You are not authorized to execute this application"
At the same time when we check in SLG1, we get the below errors:
No candidate could be found for US E0023127
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 361
Apart from this we are not getting any dumps/traces in ST22/ST05/ST01.
When we encountered this error for the first time, we executed the report RCF_CREATE_USER in SE38 and the problem was resolved.
We got the error again 2 days back, after that also it got automatically resolved. But, now we are getting this error continuously.
We also tried re-executing the report RCF_CREATE_USER and HRALXSYNC but no use.
The service user (for recruiter) is a reference user from RCF_CAND_INT.
We have also tried giving different roles and authorizations to the user.
SAP_ERC_RECRUITER_CI_4
SAP_RCF_RECRUITER
SAP_ERC_REC_ADMIN_CI_4
SAP_ALL
We are in ECC 6 EHP 6 and we have a standalone EREC system with ERECRUIT 617 SP3.
We are stuck at this point in our EREC project.
Kindly provide your valuable suggestions for this issue.
Thanks in advance!
Regards,
Khushboo

Hello Khushboo,
the message you are getting is a bit misleading as it is the standard behavior of the quick search if the user you are logged in as recruiter does not have a candidate assigned. So the message in SLG1 points into the correct direction.
I am not sure what you are meaning by "the service user (for recruiter)". Although table T77RCF_ROLE allows to specify a reference user for all roles in eRec only the entries for internal and external candidates are actually used. So the authorization assignment for the recruiter specific roles has always to be done directy for each user. A reference user could be overwritten / reset to RCF_CAND_INT by the ALE.
What bothers me a bit is the user name and that you mention RCF_CREATE_USER and HRALXSYNC at the same time. This might be the reason for your issue. Looks like you created a candidate for a user using RCF_CREATE_USER which is later transferred in the ALE from HR Core to eRec. This was not a good idea. RCF_CREATE_USER is only for creating project users when the HR core to eRec and for special users who need a candidate while do not have an employee id in HR core (e.g. WF-BATCH). This is why I always recommend to use non-production user Ids for everyone during project phase. Its been quite a time some of my projects did otherwise and I remember a similar issue with one of the customer admins. Everytime data for the user / employee was send in ALE the candidate / user was messed up.
Getting this fixed was quite troublesome. In the end we had to dump the original candidate. We deleted all records between candidate object, central person, business partner and person object in HRP1001. By that time the customer was still on the old ALE version so today I would also delete all entries in HRP558X infotype tables for the employee. Then I would first try to finger the employee id (e.g. change the name, save, directly change it back, save again ) so it is transferred during the nightly processing of the change pointers and put in the IDoc. If this is not working I would try to transfer it again using PFAL.
Kind Regards
Roman

CProjects - DMS integration:26 036 You are not authorized for with doc.type

Hi Experts,
I need to use cProjects integration with DMS. When I try to create a link to an existing document I find the following error:
26 036 You are not authorized for with document type DRW
My user has authorization to the doc type in the DMS system (linked by RFC to cProjects system). I also have defined the object link in the document type.
Do you know which configuration may be missing?
Thanks in advance!
Neil

Hi Niel,
How is the RFC connection established between DMS and cProjects system? Do check the authorizations of the RFC user through which the connection is established.
Regards,
Vivek Pandey

While running tcode vn01, getting message you are not authorized

Hi friends,
one of the end while running tcode vn01 is getting message you are not authorized to use this function, earlier it was working fine and still it is working fine in quality, so please suggest what might be the problem,
Regards,
Tarun

Dear Friends,
Thanks a lot for your help, my problem has been resolved.
let me once again explain you what was the problem and how it got resolved.
Problem: when user was running tcode vn01, he use to enter the very first screen of vn01 but with pop up that u are not authorized to use this function.
although he was having the authorization for this tcode.
Solution: i gave sap_all to the user and after giving sap_all his problem got resolved, so it become confirmed that its only authorization problem
then i removed sap_all, checked related object of vn01 i.e s_number and its calling snum, i gave the authorization for snum and rnro but still he was facing the same problem
Then i created new role with only vn01 and assigned to my user id it was working fine, so i assigned the same role to that user but again his problem didn't resolved, then i created the copy of user and started removing roles one by one, other and for the role having vn01 authorization, by doing this problem got resolved and the role which was blocking vn01 to run come into picture, so i thought some tcode might be blocking this but it was not the case the role itself was blocking that tcode because i created the copy of the same role which was blocking vn01 and assinged to user then it was working fine and problem got resolved.
so what it concluded that might me the profile of that role was not created properly or may be it got corrupted or might be bug in ecc6.0
Thanks to all friends who contributed for the same.
i am posting one more question, please help me out in that also
i

You are not authorized to change the sales employee

Hi everyone ,
when I add an new bussiness partner not with the default sales employee ,I can't finish adding except loging on the system using manager or superuser before. the system tells that "You are not authorized to change the sales employee". This problem had been raised by someone else already,But It still confused me .I have explored the problem in b1 system and has got these results like following:
first ,there are three places where we can set default Salse mployee.
           Path1     Administation/Setup/General/Sales Employees
        or Path2   Human Resources/Employee Master Data/Sales Employee
        or   Path3 Administation/Setup/General/Users/Defaults/New/Defaults/Sales Employee
If you add a new BP , the default Sales Employee will get the value from Path3 .
If it is empty from Path3 ,it will get the value from Path2.
If it is also empty from Path2,then it will get the value from Path1.
There is Only one conditon that In Employee Master Data ,the employee is related with User and Sales Employee.
My question is that since I connected employee with User I can't change the sales employee when adding a new BP.
Another question is that since I connnected sales employee(Mike) with employee(Jone) I can't select the sales employee (Mike) as a sales employee when adding a new BP using other user loging on the system.
There Is no problem if I connect no employee with User.But If I do so ,How Can I do the Data Ownership Authorization.
Edited by: Li Mishan on Apr 17, 2008 9:40 AM
Edited by: Susanne Klemm on May 7, 2008 2:00 PM
Edited by: Philip Eller on May 21, 2008 9:02 AM

I forget to say that I had already give the user all Authorizations.I have copy the authorization from manager.
One thing I am sure that :
If you connet the sales employee with one employee,that means that sales employee can be only used by the user connected to the employee at the same time.others can't use it.
If you connet the user with employee,that means ,when log on the system with the user,you can only use the sales employee that you connected with employee at the same time.you can't use others
Edited by: Li Mishan on Apr 17, 2008 10:55 AM

You are not authorized to make changes

When I try to do in change mode for the
screen 0220 (Modified/Active), I am getting following error message:-
========================
START OF ERROR MESSAGE:
=======================
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP',
which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an
upgrate (SAP transport). The screen remains locked for editing until
the new SAP version and the customer version have been aligned
(Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored
in the user master record.
Procedure
Comsult your system administrator.
=======================
END OF ERROR MESSAGE:
=======================
For your reference, when i try to open another screen 0100 (Active), i
am able to modify.
Kindly solve this issue to proceed further.
With Thanks & Regards
Bhushan

Hello,
Thanks for your information.
The Said Screen 0220 has been modifed earlier. But now, duing Pach Apply of SAP_APPL SP15, I have skipped the set to original for the said screen. Now I have done that using SPAU and I am able to modify the said screen.
With Regards
Bhushan

You are not authorized to display a configuration.

Hi,
I am trying to configure an ABAP web dynpro application in SE80. But when the browser opens all I am getting is:
"You are not authorized to display a configuration."
I did run a system trace but there is no info in regards of failed authorization checks; same with SU53. Anybody knows what authorization objects are being checked here?
Thanks a bunch!

hi ,
When a WD application is created in ur configuration settings , a node for it is automatically created in the ICF tree.
the system performs a check against the authorization object when an ICF node is created.
refer this SAP online help :
http://help.sap.com/saphelp_NW70EHP1/helpdata/en/83/9b4941abbb4c0de10000000a1550b0/frameset.htm
regards,
amit

You are not authorized to start the administration workset - GP

I'm trying to launch the Administration Workset for GPs, to release objects from the "Life and Work Events" GPs from ESS, assigned GP Administrator to user and get the error:
"You are not authorized to start the administration workset"
Also tried adding virtually all GP and CAF roles to used with no luck, any ideas??
Max points to the correct answer =)

try to add a role called CAFUIADMIN and provide your user with this role. Otherwise all you need is the GP Adminstrator role.
hope that helps
Abdul

You are not authorized to display the case component, when using copy

I copied the standard UDM_SPS_CASE_RECORD and created a Z version with no changes, in addition also copied the standard Case Record model with no changes. I have entered my new case record model into my new element and tied both the to case type. When trying to create a case get a message "You are not authorized to display the case component"
SU53 looks good, and BASIS did a Trace and did not see anything.
When I change the configuration back to use the standard no issues and case is created. Anybody know what the issue might be?
Thanks

dear friend,
when you get this error on screen type /NSU53 , hit Enter and get a new screenshot
if you see the message ""The last authorization check was successful" that means nothing to do with Basis team, it could be a custom message - talk to abaper ;
but if you see some objects there (Authorization check failed) - please pass to security or basis guys
ask / try another user which hasn'rt such error and comare the roles you and he/she has - try to find out the difference
good luck!

You are not authorized to logon to the target system (error code 0).

I am facing the dollowing error with the TRUSTED RFC :
You are not authorized to logon to the target system (error code 0).
The connection is from Solution Manager to Managed System. The user set to the RFC has SAP_ALL and SAP_NEW profile and neverthless there is a connection error.
I have already delele all of RFCs related to managed system .
Any clue guys?
Tks
RE

Hi,
In case you selected the option current user for the RFC logon, please ensure that the user (the one you're using ) is available in both systems and also that the authorizations S_RFC and S_RFCACL are assigned on both systems.
If you're using a user just for the trusted RFC, please check if this user exist in both systems and have the mentioned authorizations.
kind regards,
Fabricius
Edited by: Fabricius Zatti on Jun 15, 2011 9:07 PM

"You are not authorized to download selected object" when trying to download SAP Kernel 7.21 EXT PL 500 with DL

Similar Messages

Maybe you are looking for