You are not authorized to page for Create button only

Background fact: we just updated to APEX 3.2.
I have an existing page that works fine with a report region that you can edit or click on a button to add a new record on a new page.
I attempted to add a region with a tabular form region. When I attempted to add my first record in a new table (no existing records) I got the message that "You are not authorized to page!". Since I had to add yet another editable region, I decided to just put 2 report regions on the existing page instead of using the tabular form. I did so, and all works well until I click on the Add buttons (either one of the 2 new buttons associated with the 2 new report regions). When I click on these buttons, I STILL get the "You are not authorized to page!" error. The edit works fine.
I checked the security on the old page, and it is set up with no authorization scheme, authentication: Page requires authentication, and Form Auto Complete On.
The new pages are set up the same way.
I don't understand why one region would work and the other, new regions won't. Could it have something to do with the upgrade?
I hope you have some suggestions.
TIA,
Deb

Export the application and look for "You are not authorized to page!" in the file. That will tell you where the message is coming from.
Scott

Similar Messages

I'm getting an error message: The app "Pages" was not installed on the iPhone "Mom's iPhone" because you are not authorized for it on this computer

Everytime I sync my iPhone it gives me the warning: The app "Pages" was not installed on the iPhone "Mom's iPhone" because you are not authorized for it on this computer.
Pages was installed when I initially purchased it for my iPhone, but when I got the 4S recently I got the above message. I tried deauthorizing and then reauthorizing, but it didn't help. The Install/Will Install option is there, but gets me the same message. (And I did hit the Apply button)

Agh! I figured out I had two apple id's and was able to install Pages from that account. Dumb! :/

CProjects - DMS integration:26 036 You are not authorized for with doc.type

Hi Experts,
I need to use cProjects integration with DMS. When I try to create a link to an existing document I find the following error:
26 036 You are not authorized for with document type DRW
My user has authorization to the doc type in the DMS system (linked by RFC to cProjects system). I also have defined the object link in the document type.
Do you know which configuration may be missing?
Thanks in advance!
Neil

Hi Niel,
How is the RFC connection established between DMS and cProjects system? Do check the authorizations of the RFC user through which the connection is established.
Regards,
Vivek Pandey

You are not authorized to create users in group

HI all,when I want to creat user or change a user information in EP7.0,I get the message:
An error occurred in the persistence. The original and possible not translatet message was: "BAPI_USER_CREATE1@BI7CLNT001: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group". Contact your system administrator.
How I can do?

You have no proper authorizations to do this. please follow this document for more details.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/668e6629-0701-0010-7ca0-994cb7dec5a3">SAP Identity Management APIs</a>
REgards,
NItin

You are not authorized to display the panel for selecting a power plan

I'm running Windows 7. Installed "Power Manager" via System Update 4.0 last night (10/23/2009). Getting this error when hitting FN+F3.
You are not authorized to display the panel for selecting a power plan.
Furthermore, I'm unable to see any of the default power schemes. Finally, I created two new power schemes, neither of them display for selection.
Any one else experiencing this issue?!?!?

Welcome to the forum!
Hmm... That seems odd. Does the userid that you're using have admin rights to the machine?
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

" You are not authorized to view the requested resource." for SLD

HI Experts,
I am trying to access Administration and Help links in SLD. But when i click on those links getting " You are not authorized to view the requested resource." And I have assigned all SLD roles to my user.
And same message is coming when click on System Information in http://<host>:<port>/index.html page. Please let me know that anyother roles required for accessing SLD and System Information.
regards,
Sree.
Edited by: sree pedasingh on Jan 19, 2011 10:25 AM

Dear Sree,
But I don't have such a group !
Regards,
Omid

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

TS1474 Inspite of following the instructions for authorization of my iMac and my ipad I am unable to sync a movie from my iMac to my ipad. All I get is a message that says you are not authorized for it on this computer. Any idea what is wrong?

Not able to sync movie purchased from itunes from imac to ipad2.

try this:
redmatter
This helped meRe: not copied to iPad because you are not authorized for it on this computer
Nov 20, 2011 10:41 AM (in response to hoppo72)
One workarwound is to do the following:
1. Remove the digital content from iTunes (but keep the files)
2. Rename all .m4v files to .mp4 files
3. Add the files back to iTunes
This seems to fix the problem for me
Hope this helps

BAPI_NETWORK_MAINTAIN for UPDATE ACTIVITY-CN 307-You are not authorized to

Hi all,
sorry for disturb,
I have a problem and I don't understand why....
I use BAPI_NETWORK_MAINTAIN with simple code.
I have tried with SE37 with the same values and it correctly update the activity. without error messages.
but with the same values in the program returns me an error message and it doesn't update the data:
E CN 307 You are not authorized to change activity or element S11021201 0108
I have a USER with SAPALL.....
DATA: i_method_project LIKE bapi_method_project         OCCURS 0 WITH HEADER LINE.
DATA: i_activity               LIKE bapi_network_activity       OCCURS 0 WITH HEADER LINE.
DATA: i_activity_update LIKE bapi_network_activity_up OCCURS 0 WITH HEADER LINE.
i_method_project-refnumber                     = 000001.
i_method_project-objecttype                     = 'NETWORKACTIVITY'.
i_method_project-method                          = 'UPDATE'.
i_method_project-objectkey                       = 'S110202010108'.
APPEND i_method_project. CLEAR: i_method_project.
i_method_project-method                          = 'SAVE'.
APPEND i_method_project. CLEAR: i_method_project.
i_activity-network                                     = 'S11020201'.
i_activity_update-network                        = 'X'.
i_activity-activity                                       = '0108'.
i_activity_update-activity                          = 'X'.
i_activity-control_key                                = 'PS01'.
i_activity_update-control_key                   = 'X'.
i_activity-duration_normal                         = 8,5.
i_activity_update-duration_normal            = 'X'.
APPEND i_activity. CLEAR: i_activity.
CALL FUNCTION 'BAPI_NETWORK_MAINTAIN'
    IMPORTING
      return                                 = return
    TABLES
      i_method_project                = i_method_project
      i_activity                             = i_activity
      i_activity_update                = i_activity_update
      e_message_table               = e_message_table.
thx in advance all
Regards
Marco Echino.
Edited by: Marco Echino on Jun 22, 2011 5:04 PM

Hello Marco,
                    To get more details you need to debub the both options as in the logic SAP is calling another report "R_BAPI_NETWORK_MAINTAIN" using submit statement inside the FM "BAPI_NETWORK_MAINTAIN".
And also befor the submit statement they gad used the EXPORT statement to save the data to the SAP memory.
Inside the Report BAPI_NETWORK_MAINTAIN" SAP logic is calling the FM "2002_NETWORK_MAINTAIN" for doing the update.
So if the Export memory content gets changed due to another execution then the returm value may get changed and end up with conflicts.
So better you need to debub the both scenarios (SE37 & from program call).
You can knock out the problem you are facing.
Hope this answers your question.
Thanks,
Greetson

The app was not installed on the iPod because you are not authorized for it on this computer

Im trying to put a game onto my iPod touch but a message popped up saying "The app was not installed on the ipod because you are
not authorized for it on this computer. So i tried to look for an answer to this problem and i found one saying you have to go into store
at the top and authorize so i did and it says ive already authorized it cuz i did it last night please help ME
P.S. I restored it last night just saying to see if maybe it has something to do with that?

You need to authorize the account on the computer:
Store>Authorize ths computer
Hope this helps

HT1386 I repeatedly receive an error mesage when trying to sync my ipod touch with my new computer, "some of the items in the itunes library, were not copied to the ipod because you are not authorized for them on this computer." My computer is authorized

I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong? I'm missing about 100 songs as a result of this error!!

See:
iTunes Store: About authorization and deauthorization
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
Could the items be purchased by another account?

You are not authorized to execute this application in SAP E-Recruit

Hi,
We are getting the below error while going to recruitment page for recruiter:
"You are not authorized to execute this application"
At the same time when we check in SLG1, we get the below errors:
No candidate could be found for US E0023127
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 361
Apart from this we are not getting any dumps/traces in ST22/ST05/ST01.
When we encountered this error for the first time, we executed the report RCF_CREATE_USER in SE38 and the problem was resolved.
We got the error again 2 days back, after that also it got automatically resolved. But, now we are getting this error continuously.
We also tried re-executing the report RCF_CREATE_USER and HRALXSYNC but no use.
The service user (for recruiter) is a reference user from RCF_CAND_INT.
We have also tried giving different roles and authorizations to the user.
SAP_ERC_RECRUITER_CI_4
SAP_RCF_RECRUITER
SAP_ERC_REC_ADMIN_CI_4
SAP_ALL
We are in ECC 6 EHP 6 and we have a standalone EREC system with ERECRUIT 617 SP3.
We are stuck at this point in our EREC project.
Kindly provide your valuable suggestions for this issue.
Thanks in advance!
Regards,
Khushboo

Hello Khushboo,
the message you are getting is a bit misleading as it is the standard behavior of the quick search if the user you are logged in as recruiter does not have a candidate assigned. So the message in SLG1 points into the correct direction.
I am not sure what you are meaning by "the service user (for recruiter)". Although table T77RCF_ROLE allows to specify a reference user for all roles in eRec only the entries for internal and external candidates are actually used. So the authorization assignment for the recruiter specific roles has always to be done directy for each user. A reference user could be overwritten / reset to RCF_CAND_INT by the ALE.
What bothers me a bit is the user name and that you mention RCF_CREATE_USER and HRALXSYNC at the same time. This might be the reason for your issue. Looks like you created a candidate for a user using RCF_CREATE_USER which is later transferred in the ALE from HR Core to eRec. This was not a good idea. RCF_CREATE_USER is only for creating project users when the HR core to eRec and for special users who need a candidate while do not have an employee id in HR core (e.g. WF-BATCH). This is why I always recommend to use non-production user Ids for everyone during project phase. Its been quite a time some of my projects did otherwise and I remember a similar issue with one of the customer admins. Everytime data for the user / employee was send in ALE the candidate / user was messed up.
Getting this fixed was quite troublesome. In the end we had to dump the original candidate. We deleted all records between candidate object, central person, business partner and person object in HRP1001. By that time the customer was still on the old ALE version so today I would also delete all entries in HRP558X infotype tables for the employee. Then I would first try to finger the employee id (e.g. change the name, save, directly change it back, save again ) so it is transferred during the nightly processing of the change pointers and put in the IDoc. If this is not working I would try to transfer it again using PFAL.
Kind Regards
Roman

"You are not authorized to edit the chosen object" in LWE

Hello gurus,
I want to edit the standard HTML content that is delivered with Life and work events. Before editing this, i want to copy the ESS HTML content package to a custom folder and then edit and modify as per my requirements. i navigated to Life an work events - US --> HTML content --> Content Package --> ESS HTML Content Package and clicked on Open. I am getting the error "You are not authorized to edit the chosen object".
How do I access this content without any error? Do I need any specific roles to be able to access this content? i need to access this content to be able to copy and paste it to a custom folder.
Also, when I tried copying at the ESS HTML content Package level and then pasting it into a custom folder, i get a popup with all empty rows and columns and there are two buttons OK and CANCEL.
How do I copy this ESS HTML content package to a custom location?
please suggest .
An update: Since I could not open/edit the standard ess html content package, I created my own HTML files from scratch and created a content package and uploaded my html files and folders into the custom content package. Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events.
How do I achieve this? What else is needed to call these html pages from the event?
Please suggest and any help is really appreciated.
Thanks,
Maria Kutty Somori.....
Edited by: MariaKutty on Jun 24, 2011 1:01 AM
Edited by: MariaKutty on Jun 24, 2011 1:05 AM

Hello Maria,
I too tried earlier for copying these HTML content and paste them in my custom folder and then modify them....
But I too faced the similar error as of yours.
I dont' know the reason why this happens....I guess SAP does not allow you to modify there content.
Nyways, there is always a workaround solution....
You are spot on when you say...You are creating new HTML files from scratch.....but you dont' need to create from scratch !!
You can still get these files.
1. Check Directory Structure : Navigate to Life and work events - US folder in GP design time -> HTML Content -> Content Package -> ESS HTML Content Package and click on "Open" then click on content tab..
Here you can view all the content files supplied....additionally please note that there are two folders "CSS" and "Images".
If you wish to create your own content from modification to SAP supplied content...then make sure in your own package these folders are also with similar directory structure.
2. Come out of gallery and as an end user Open your life and work events page that you wish to modify.
For e.g. ESS -> Life and Work events -> My First Days -> New Hire Checklist.
3. Right click on HTML page and click on Properties.
4. Copy the Address/URL of page.
It will be something like :
http://Host:Port/gpcore/ctpkg/094BABAA643911E091070000014B8BFA/NewHireCheckList.html
5. Access above URL directly from Browser (In new window) and refresh that opened page. Check that all the content is visible and in correct font and format.
6. Click on "Page" -> Save As...from your browser tool bar.
7. From "Save as type" select HTML complete....
and save the page.
8. As a result you will get an HTML file and a folder.
Inside the folder there will be your images and CSS....Now you know how to make your own content.......
Very Important : Please note that directory structure of your CSS images and HTML must be similar to what you saw in point 1.
And you can easily modify your content...accordingly...
Now the second part of your question :
"Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events. "
I hope you refer to something that is given by SAP in the form of " ESS -> Life and Work events -> My First Days -> New Hire Checklist"..
As you can see "New hire checklist" is the First link available under My first days...thus by default it gets displayed when user clicks on "My first days"....
Is this that you want to mimic ?
Well for that your process in GP design time must look like this :
http://img594.imageshack.us/img594/7/imageqw.png
For eg. Create a new callable object with name "New Hire Checklist" of type : "Content package"..
Wizard will help you with the rest.
Revert back if you face any issues.

While running tcode vn01, getting message you are not authorized

Hi friends,
one of the end while running tcode vn01 is getting message you are not authorized to use this function, earlier it was working fine and still it is working fine in quality, so please suggest what might be the problem,
Regards,
Tarun

Dear Friends,
Thanks a lot for your help, my problem has been resolved.
let me once again explain you what was the problem and how it got resolved.
Problem: when user was running tcode vn01, he use to enter the very first screen of vn01 but with pop up that u are not authorized to use this function.
although he was having the authorization for this tcode.
Solution: i gave sap_all to the user and after giving sap_all his problem got resolved, so it become confirmed that its only authorization problem
then i removed sap_all, checked related object of vn01 i.e s_number and its calling snum, i gave the authorization for snum and rnro but still he was facing the same problem
Then i created new role with only vn01 and assigned to my user id it was working fine, so i assigned the same role to that user but again his problem didn't resolved, then i created the copy of user and started removing roles one by one, other and for the role having vn01 authorization, by doing this problem got resolved and the role which was blocking vn01 to run come into picture, so i thought some tcode might be blocking this but it was not the case the role itself was blocking that tcode because i created the copy of the same role which was blocking vn01 and assinged to user then it was working fine and problem got resolved.
so what it concluded that might me the profile of that role was not created properly or may be it got corrupted or might be bug in ecc6.0
Thanks to all friends who contributed for the same.
i am posting one more question, please help me out in that also
i

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

You are not authorized to page for Create button only

Similar Messages

Maybe you are looking for