You are not authorized to save lists in local

Dear Sir,
We want to give access to user to save a report on local disk or many transactions is for monitoring display reports, for such transaction codes. Because :
It is showing following error :
You are not authorized to save lists in local
files (SY-SUBRC 12)
We want to give access to save report on local disk file.
Please guide us how to give access for same.
which T code access we have to provide for ?
Thanking You,
Vijay Vadgaonkar
Varroc Engineering Pvt. Ltd.

Dear
This is due to authorization failed. you should provide authorization to object S_GUI and should provide avtivity 61 then you can do that.
other wise you can check the roles which can be done using SUIM --> ROLES --> Roles by complex Selection Cri --> [provide arthorizarion object S_GUI] >> then execute
find the role what you want then add.
reg
priyanshann

Similar Messages

You are not authorized to execute this application in SAP E-Recruit

Hi,
We are getting the below error while going to recruitment page for recruiter:
"You are not authorized to execute this application"
At the same time when we check in SLG1, we get the below errors:
No candidate could be found for US E0023127
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 361
Apart from this we are not getting any dumps/traces in ST22/ST05/ST01.
When we encountered this error for the first time, we executed the report RCF_CREATE_USER in SE38 and the problem was resolved.
We got the error again 2 days back, after that also it got automatically resolved. But, now we are getting this error continuously.
We also tried re-executing the report RCF_CREATE_USER and HRALXSYNC but no use.
The service user (for recruiter) is a reference user from RCF_CAND_INT.
We have also tried giving different roles and authorizations to the user.
SAP_ERC_RECRUITER_CI_4
SAP_RCF_RECRUITER
SAP_ERC_REC_ADMIN_CI_4
SAP_ALL
We are in ECC 6 EHP 6 and we have a standalone EREC system with ERECRUIT 617 SP3.
We are stuck at this point in our EREC project.
Kindly provide your valuable suggestions for this issue.
Thanks in advance!
Regards,
Khushboo

Hello Khushboo,
the message you are getting is a bit misleading as it is the standard behavior of the quick search if the user you are logged in as recruiter does not have a candidate assigned. So the message in SLG1 points into the correct direction.
I am not sure what you are meaning by "the service user (for recruiter)". Although table T77RCF_ROLE allows to specify a reference user for all roles in eRec only the entries for internal and external candidates are actually used. So the authorization assignment for the recruiter specific roles has always to be done directy for each user. A reference user could be overwritten / reset to RCF_CAND_INT by the ALE.
What bothers me a bit is the user name and that you mention RCF_CREATE_USER and HRALXSYNC at the same time. This might be the reason for your issue. Looks like you created a candidate for a user using RCF_CREATE_USER which is later transferred in the ALE from HR Core to eRec. This was not a good idea. RCF_CREATE_USER is only for creating project users when the HR core to eRec and for special users who need a candidate while do not have an employee id in HR core (e.g. WF-BATCH). This is why I always recommend to use non-production user Ids for everyone during project phase. Its been quite a time some of my projects did otherwise and I remember a similar issue with one of the customer admins. Everytime data for the user / employee was send in ALE the candidate / user was messed up.
Getting this fixed was quite troublesome. In the end we had to dump the original candidate. We deleted all records between candidate object, central person, business partner and person object in HRP1001. By that time the customer was still on the old ALE version so today I would also delete all entries in HRP558X infotype tables for the employee. Then I would first try to finger the employee id (e.g. change the name, save, directly change it back, save again ) so it is transferred during the nightly processing of the change pointers and put in the IDoc. If this is not working I would try to transfer it again using PFAL.
Kind Regards
Roman

BAPI_NETWORK_MAINTAIN for UPDATE ACTIVITY-CN 307-You are not authorized to

Hi all,
sorry for disturb,
I have a problem and I don't understand why....
I use BAPI_NETWORK_MAINTAIN with simple code.
I have tried with SE37 with the same values and it correctly update the activity. without error messages.
but with the same values in the program returns me an error message and it doesn't update the data:
E CN 307 You are not authorized to change activity or element S11021201 0108
I have a USER with SAPALL.....
DATA: i_method_project LIKE bapi_method_project         OCCURS 0 WITH HEADER LINE.
DATA: i_activity               LIKE bapi_network_activity       OCCURS 0 WITH HEADER LINE.
DATA: i_activity_update LIKE bapi_network_activity_up OCCURS 0 WITH HEADER LINE.
i_method_project-refnumber                     = 000001.
i_method_project-objecttype                     = 'NETWORKACTIVITY'.
i_method_project-method                          = 'UPDATE'.
i_method_project-objectkey                       = 'S110202010108'.
APPEND i_method_project. CLEAR: i_method_project.
i_method_project-method                          = 'SAVE'.
APPEND i_method_project. CLEAR: i_method_project.
i_activity-network                                     = 'S11020201'.
i_activity_update-network                        = 'X'.
i_activity-activity                                       = '0108'.
i_activity_update-activity                          = 'X'.
i_activity-control_key                                = 'PS01'.
i_activity_update-control_key                   = 'X'.
i_activity-duration_normal                         = 8,5.
i_activity_update-duration_normal            = 'X'.
APPEND i_activity. CLEAR: i_activity.
CALL FUNCTION 'BAPI_NETWORK_MAINTAIN'
    IMPORTING
      return                                 = return
    TABLES
      i_method_project                = i_method_project
      i_activity                             = i_activity
      i_activity_update                = i_activity_update
      e_message_table               = e_message_table.
thx in advance all
Regards
Marco Echino.
Edited by: Marco Echino on Jun 22, 2011 5:04 PM

Hello Marco,
                    To get more details you need to debub the both options as in the logic SAP is calling another report "R_BAPI_NETWORK_MAINTAIN" using submit statement inside the FM "BAPI_NETWORK_MAINTAIN".
And also befor the submit statement they gad used the EXPORT statement to save the data to the SAP memory.
Inside the Report BAPI_NETWORK_MAINTAIN" SAP logic is calling the FM "2002_NETWORK_MAINTAIN" for doing the update.
So if the Export memory content gets changed due to another execution then the returm value may get changed and end up with conflicts.
So better you need to debub the both scenarios (SE37 & from program call).
You can knock out the problem you are facing.
Hope this answers your question.
Thanks,
Greetson

You are not authorized to logon to the target system (error code 1)

Dear Expert,
I met some problems that 'You are not authorized to logon to the target system (error code 1)' when I tried to do the auth. testing for RFC SM_CLNT<SID>_TRUSTED in satellite system.
Following SAP note 128447, I recreated the RFCs in SMSY in solution manager for satellite system using existing user.
It was still error ''You are not authorized to logon to the target system (error code 1)'.
In SMSY in solman, I checked the RFCs connection which I recreated using RFC wizard, they are ok(green).
I have already maintain the auth. obj S_RFCACL for user who is running this.
So, I am confused what authorization I did not maintain in user? Please help me out!
Thanks a lot!
Br,
Lucy
Edited by: lucy YANG on Mar 19, 2011 6:59 AM
Edited by: lucy YANG on Mar 19, 2011 7:01 AM

Hello Lucy,
The error is pretty clear that the calling system is not a trusted system so I don't think you should bother with an authorization trace at this time, because authorizations is not quite the issue. The calling system is NOT a trusted system, authorizations or not.
Please refer to SAP Note 128447 Trusted/Trusting systems
The error is listed there:
Authorization errors that occur when using an RFC destination for which
the 'Trusted Systems' indicator is set are documented with the following
message:
"No authorization to log on as a trusted system (Trusted RC = #)."
In this case, the trusted return code # (# = 0, 1, 2, 3) has the
following relevance:
1   The calling system is not a trusted system, or the
     security key for the system is invalid.
     Solution: Recreate the trusted system (see
     documentation).
These are the links the Note provides for the documentation:
[http://help.sap.com
/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/frameset.htm
] in accordance with the documentation
[http://help.sap.com/
saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm].
The Note states to recreate the Trusted system according to the Documentation (links above)
This is all in the Note. Please follow the Note to reslve this known error.
Regards,
Paul

Getting error message " You are not authorized to access the migration tool "

One of the users is noticed with error message " You are not authorized to access the migration tool " in SAP Cloud for Customer tenant. thanks

Hello Raj,
It seems that this user does not have proper authorization to perform Data Migration.
You need to go to the WorkCenter View Assignment for this user under his access rights & need to assign him the workcenter "Business Configuration" & under it, also assign him relevant access to Data Migration.
This shall fix the issue & the user shall not get this error while trying to perform Data Migration.
Steps:
1. Go to Workcneter: "Application and User Management => Business Users => Seerach for the suer who gets this error => Edit-> Access Rights => Click on Workcenter view Assignment tab & assign the above mentioned worokcenter access and save."
Let me know for any further queries.
BR
Ankur

Itunes cancels burns because "you are not authorized"

Update to my question posted 23 June 2007. I continue to have the same problem with syncing my ipod that I described in my original post. I have to "authorize" the (already authorized) computer every time I connect my ipod while itunes starts erasing the ipod, then sync again to replace the tracks that were erased. Annoying but not impossible.
Just d/l'd itunes 8. Problem is now worse. I am unable to burn a CD of a recently purchased song because "you are not authorized". I've tried authorizing the PC. I've tried de-authorizing and then re-authorizing computer. itunes invariably tells me I've successfully authorized, then tells me I'm not authorized when I try to burn the CD.
Would love to hear suggestions before I waste another morning on the phone with tech support!

Just ran into this myself, not having synced since May. Came on line to find the answer myself. Even more complicated, out of a list of 100 songs that it told my I was not authorized to play on this computer, some of them are actually still on my ipod (thank god), but now I'm afraid to resync for fear I will lose them or other items. Sorry I don't have the answer. I came looking for the answer myself. Could you, however, help me with how you are trying to "re-authorize" your computer, as I do not even know how to do that. Thanks.

I am being blocked from my "favorites"on my iPad 2 with the following....... You are not authorized to open this file. What do I need to do

I'm being blocked from my favorites on my iPad 2 with the following........... You are not authorized to open this file. What do I do?

I'm not sure whether you have tried the "usual" things:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Command+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
* "3-bar" menu button (or Tools menu) > Options > Advanced
* Firefox menu > Preferences > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* classic Tools menu > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

"You are not authorized to edit the chosen object" in LWE

Hello gurus,
I want to edit the standard HTML content that is delivered with Life and work events. Before editing this, i want to copy the ESS HTML content package to a custom folder and then edit and modify as per my requirements. i navigated to Life an work events - US --> HTML content --> Content Package --> ESS HTML Content Package and clicked on Open. I am getting the error "You are not authorized to edit the chosen object".
How do I access this content without any error? Do I need any specific roles to be able to access this content? i need to access this content to be able to copy and paste it to a custom folder.
Also, when I tried copying at the ESS HTML content Package level and then pasting it into a custom folder, i get a popup with all empty rows and columns and there are two buttons OK and CANCEL.
How do I copy this ESS HTML content package to a custom location?
please suggest .
An update: Since I could not open/edit the standard ess html content package, I created my own HTML files from scratch and created a content package and uploaded my html files and folders into the custom content package. Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events.
How do I achieve this? What else is needed to call these html pages from the event?
Please suggest and any help is really appreciated.
Thanks,
Maria Kutty Somori.....
Edited by: MariaKutty on Jun 24, 2011 1:01 AM
Edited by: MariaKutty on Jun 24, 2011 1:05 AM

Hello Maria,
I too tried earlier for copying these HTML content and paste them in my custom folder and then modify them....
But I too faced the similar error as of yours.
I dont' know the reason why this happens....I guess SAP does not allow you to modify there content.
Nyways, there is always a workaround solution....
You are spot on when you say...You are creating new HTML files from scratch.....but you dont' need to create from scratch !!
You can still get these files.
1. Check Directory Structure : Navigate to Life and work events - US folder in GP design time -> HTML Content -> Content Package -> ESS HTML Content Package and click on "Open" then click on content tab..
Here you can view all the content files supplied....additionally please note that there are two folders "CSS" and "Images".
If you wish to create your own content from modification to SAP supplied content...then make sure in your own package these folders are also with similar directory structure.
2. Come out of gallery and as an end user Open your life and work events page that you wish to modify.
For e.g. ESS -> Life and Work events -> My First Days -> New Hire Checklist.
3. Right click on HTML page and click on Properties.
4. Copy the Address/URL of page.
It will be something like :
http://Host:Port/gpcore/ctpkg/094BABAA643911E091070000014B8BFA/NewHireCheckList.html
5. Access above URL directly from Browser (In new window) and refresh that opened page. Check that all the content is visible and in correct font and format.
6. Click on "Page" -> Save As...from your browser tool bar.
7. From "Save as type" select HTML complete....
and save the page.
8. As a result you will get an HTML file and a folder.
Inside the folder there will be your images and CSS....Now you know how to make your own content.......
Very Important : Please note that directory structure of your CSS images and HTML must be similar to what you saw in point 1.
And you can easily modify your content...accordingly...
Now the second part of your question :
"Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events. "
I hope you refer to something that is given by SAP in the form of " ESS -> Life and Work events -> My First Days -> New Hire Checklist"..
As you can see "New hire checklist" is the First link available under My first days...thus by default it gets displayed when user clicks on "My first days"....
Is this that you want to mimic ?
Well for that your process in GP design time must look like this :
http://img594.imageshack.us/img594/7/imageqw.png
For eg. Create a new callable object with name "New Hire Checklist" of type : "Content package"..
Wizard will help you with the rest.
Revert back if you face any issues.

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

HT1386 I repeatedly receive an error mesage when trying to sync my ipod touch with my new computer, "some of the items in the itunes library, were not copied to the ipod because you are not authorized for them on this computer." My computer is authorized

I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong? I'm missing about 100 songs as a result of this error!!

See:
iTunes Store: About authorization and deauthorization
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
Could the items be purchased by another account?

TS1474 Inspite of following the instructions for authorization of my iMac and my ipad I am unable to sync a movie from my iMac to my ipad. All I get is a message that says you are not authorized for it on this computer. Any idea what is wrong?

Not able to sync movie purchased from itunes from imac to ipad2.

try this:
redmatter
This helped meRe: not copied to iPad because you are not authorized for it on this computer
Nov 20, 2011 10:41 AM (in response to hoppo72)
One workarwound is to do the following:
1. Remove the digital content from iTunes (but keep the files)
2. Rename all .m4v files to .mp4 files
3. Add the files back to iTunes
This seems to fix the problem for me
Hope this helps

You are not authorized to call up line item display (FB03)

Hi,
actually; I am facing a problem; one user is getting error message "You are not authorized to call up line item display" when he is trying to view the payment usage of document no in FB03 transaction code.
I have checked and found that user is already having display access for the company code which he is putting under company code field.
Also as per the SU53 screen shot; it is showing
Authorization check failed for S_CTS_ADMI
Field - CTS_ADMFCT
for - TABL
I have not run the trace yet..
Kindly advice on what could be the problem and solution for that...
Many thanks in advance for your help.
Regards,
Anuj

> Also as per the SU53 screen shot; it is showing
>
> Authorization check failed for S_CTS_ADMI
> Field - CTS_ADMFCT
> for - TABL
Total Questions: 8 (6 unresolved)
Good match!

HTTP Error 403 You are not authorized to view the requested resource

Hi Experts,
When I open the node "Hierarchie groups" I get the following error: "Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction. "
In the log file I find the following:
User MI_SERVADM, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].
I used the User Service for administrator, I have not used the individual user for administrator.
Regards, Gokhan

Ah anyway I receive the above error even when I do a search in the node "Mobile Components".
Now there's this in the LOG DefaultTrace (2 errors following)::
1) Connection is already closed and no longer associated with a managed connection
2) Exception occurred when processing Search:
[EXCEPTION]
com.sap.ip.mi.admin.core.ApplicationException: Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction.
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerBean.getHierarchy(GroupingControllerBean.java:730)
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerBean.getHierarchy(GroupingControllerBean.java:580)
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerLocalLocalObjectImpl0.getHierarchy(GroupingControllerLocalLocalObjectImpl0.java:547)
     at com.sap.ip.mi.admin.services.GroupingDelegate.getHierarchy(GroupingDelegate.java:81)
     at com.sap.ip.mi.admin.ui.HierarchyGroup.buildUpList(HierarchyGroup.java:252)
     at com.sap.ip.mi.admin.ui.wdp.InternalHierarchyGroup.buildUpList(InternalHierarchyGroup.java:409)
     at com.sap.ip.mi.admin.ui.Search.triggerSearch(Search.java:222)
     at com.sap.ip.mi.admin.ui.wdp.InternalSearch.triggerSearch(InternalSearch.java:286)
     at com.sap.ip.mi.admin.ui.Search.wdDoInit(Search.java:138)
     at com.sap.ip.mi.admin.ui.wdp.InternalSearch.wdDoInit(InternalSearch.java:272)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.onComponentCreated(ViewManager.java:258)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.fireComponentCreated(ComponentUsage.java:575)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:175)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:141)
     at com.sap.lm.webadmin.mainframe.RenderingUtils.loadCurrentPlugin(RenderingUtils.java:189)
     at com.sap.lm.webadmin.mainframe.MainFrameView.wdDoModifyView(MainFrameView.java:272)
     at com.sap.lm.webadmin.mainframe.wdp.InternalMainFrameView.wdDoModifyView(InternalMainFrameView.java:1419)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Edited by: dpns22 on Feb 1, 2010 10:31 PM
Edited by: dpns22 on Feb 1, 2010 10:59 PM

SYSFAIL in qRFC Outbound Queues - You are not authorized to logon

Dear Guru's,
I am new to BASIS. During health check for my company, I came across T-Code SMQ1 and found many Queue Status "SYSFAIL". Error message "You are not authorized to logon to the target system (error code 0)".
The souce system:
SAP 7.0
Component: CRM 5.0
DB : MSSQL 7.0
Kernel: 700
The target system:
SAP 7.0
Component: SAP ECC 6.0
DB : MSSQL 7.0
Kernel: 700
Firstly,
1. I login to CRM Quality Assurance Client 600. Execute SMQ1. Enter the Queue Name. Below is what I found.
http://img.photobucket.com/albums/v347/albumster/SAP/001-SMQ1-SYSFAIL.jpg
2. Once I Choose the row, I found the below error.
http://img.photobucket.com/albums/v347/albumster/SAP/002-SMQ1-NotAuthorized.jpg
3. I thought its an authorization issue so enter T-Code PFCG and added user COLACOM to Role Z_TRUSTED_RFC and do a user comparison. To my surprise, He was already given the authorization before!
http://img.photobucket.com/albums/v347/albumster/SAP/003-SMQ1-GivenAuth.jpg
Please advise.
If you need more information, please let me which T-Code to use so I can capture a print screen.
Thank You,
Jacky

Ok you need the folowing options in your word document:
1 .Start Word without any EWA.
2. Menu Extras=>Makro=>Security
2.1 Register "security level"=> the last or 2nd last radiobutton
2.2 The other Register = Set Checkbox "...Visual Basic Project ..." =true.
Then it should be work...
/greetings nico
Edited by: Nico Effenberger on Jan 28, 2009 5:15 PM

You are not authorized to read entries in the cash journal

Error while trying to access Cash journal " You are not authorized to read entries in the cash journal ".

Hi Holger,
May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details.

You are not authorized to save lists in local

Similar Messages

Maybe you are looking for