You are not the candidate/staffing manager for the specified org unit

Hi all.
With cProjects 4.0 (SP10) we are using the staffing scenario "Resource manager via responsible organization" meaning that the role will be directed to the organizational unit specificed in the "staffing process" tab who then handles the staffing.
Despite the above I get the messages from the Subject header when maintaining the role
You are not a candidate manager for the specified or initial organizational unit   
You are not a staffing manager for the specified organizational unit"
As the scenario builds upon the project creating requirements through the role the above messages seem unlogical.
Is there an explanation for why the messages are received?
Best regards / Anders

Hi.
I also assume that is meaning of the message - but is that logical in this staffing scenario?
The project (leader) should create & update the role and then hand it over to the org unit for staffing by changing the status of the role "Start staffing process".  The above message should not be received upon setting that status.
It can not be the intention that the project leader should be assigned as a resource manager to all possible org units.
Phrasing it differently, when the status of the role only is "Staffing in preparation" the project leader must be able to update it including setting the staffing status without these messages being received.
When the status of the role is Staffing in process the only thing the project leader ought to be able to do is the reset the status of the role (cancel the staffing request).
Regards / Anders

Similar Messages

  • Your system of contact for help is very rigid and complecated : Hallo, you are charging me twice every month for the Adobe Creative Cloud, please, please cancel one!!!!! Hauke

    Your system of contact for help is very rigid and complecated : Hallo, you are charging me twice every month for the Adobe Creative Cloud, please, please cancel one!!!!! Hauke
    Message was edited by: Hauke Juergens : Your system of contact for help is very rigid and complecated : Hallo, you are charging me twice every month for the Adobe Creative Cloud, please, please cancel one!!!!! Hauke

    Posting here is not going to help you.  This is a user to user forum.  No one here has any ability to manage your account.
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

  • You are not recognized as a user in the SAP customer notification system

    Hello,
    we are in OSS registered as CCC. I am able to send notifications from our SolMan to OSS with components(instalations) which are registered under out SAP customer number(our SolMan instalation etc.).
    When I want to sned notification for our customers to OSS but with component of our customer(he has another SAP number, his instalation) then I got an error message
    You are not recognized as a user in the SAP customer notification system:
    You are not recognized as a user in the SAP customer notification system
    Message no. DNO158
    Diagnosis
    No address data exists for this logon user in the SAP problem notification system.
    The function you activated could not be executed.
    Activated function Diagnosis
    Send notification to SAP The notification was saved, but could
    not be sent to SAP.
    Update notification at SAP The notification was not updated to
    reflect the SAP version.
    Check for changes The system cannot compare the notification
    with the current version at SAP.
    Request list of the The notifications that you sent to SAP
    notifications contained cannot be updated.
    in the SAP problem notification system.
    Procedure
    Contact your system administrators.
    Could you help me please?
    view V_AISAPCUSTNOS ist filled with our customer numbers, I am in AISUSER...
    Thanks Miloslav Pudil

    Hello Miloslav,
    We have the same problem.
    Somebody knows how can we resolve this?
    Thanks,
    Diego.

  • You are not authorized to read entries in the cash journal

    Error while trying to access Cash journal " You are not authorized to read entries in the cash journal ".

    Hi Holger,
    May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details.

  • The iTunes Library file cannot be saved.  You do not have enough access privileges for the operation.

    How do I stop the message above from displaying in iTunes?:

    The location of the iTunes Library file may be read-only or owned by a different user.
    Default locations:
    XP: C:\Documents and Settings\<login>\My Documents\My Music\iTunes
    Vista: C:\Users\<login>\Music\iTunes
    Windows 7: C:\Users\My Music\itunes
    Right click the iTunes folder and choose Properties
    Look at the Attributes and see if Read-Only is checked.
    Uncheck it and click OK, at the apply to all subfolders and files prompt, make sure all subfolders and files is selected and click OK.
    If your iTunes library saves now you are done.
    If it does not you will need to try on each directory above the iTunes directory.
    Of course if you are not using the default locations you'll have to alter the path to the one you find in iTunes Edit->Preferences, Advanced tab.

  • Request proProcessing failed. (XLS 000009) You do not have data access rights for the connection.

    Hello,
    I have created a universe UNX on top of a sql table. and i used this UNX via query browser to create a dahsboard. when i run this dashboard with "administrator" the dashboard runs but when i run with any other user it shows the below error. I have checked the connections user security and the i have given "full rights" to the user group and also the universe user security has "full rights" but still i get this error. How do i solve this issue. Couldnt find where the authorization is missing. Please help

    Hi Arjit,
    I have object level security set in universe security for my universe folder in which i have all universes as below. "Everyone" is the user group i am trying to access which is showing error and administrator works fine.
    I also have set some universe security on the particular universe i am using as below:
    User security is set to full control for user group "everyone"..

  • I get the message you are not authorized to purchase. In the uk I must fist switch to the us

    I get the message "I must first switch to us store to purchase  because I'm not authorized to purchase in the uk.  How do I switch?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you will be located.
    8. Tap "Done".

  • HT1933 When I was syncing my iphone 4 to computer my itunes crashed and started flipping from one to another.  So I had to reset my iphone, which erased on my songs on my phone.  Know all the recent songs i purchased are not on my itunes account for the l

    When I was syncing my iphone 4 to my computer my itunes crashed and was looping from one song to another.  so i tried all the suggestions and had to reset my iphone which wiped out all my songs.  when I went to purchases my recent song purchases from itunes where gone.. how do I get them back or get credit for them..

    nevermind, i figuered it out

  • You are not authorized to page for Create button only

    Background fact: we just updated to APEX 3.2.
    I have an existing page that works fine with a report region that you can edit or click on a button to add a new record on a new page.
    I attempted to add a region with a tabular form region. When I attempted to add my first record in a new table (no existing records) I got the message that "You are not authorized to page!". Since I had to add yet another editable region, I decided to just put 2 report regions on the existing page instead of using the tabular form. I did so, and all works well until I click on the Add buttons (either one of the 2 new buttons associated with the 2 new report regions). When I click on these buttons, I STILL get the "You are not authorized to page!" error. The edit works fine.
    I checked the security on the old page, and it is set up with no authorization scheme, authentication: Page requires authentication, and Form Auto Complete On.
    The new pages are set up the same way.
    I don't understand why one region would work and the other, new regions won't. Could it have something to do with the upgrade?
    I hope you have some suggestions.
    TIA,
    Deb

    Export the application and look for "You are not authorized to page!" in the file. That will tell you where the message is coming from.
    Scott

  • I am getting an error message saying: The itunes library file can not be saved.  You do not have enough access priviliges for this operation.  What does this mean?

    Hi,
    Looking for some help.  I am getting the following error message on my itunes account:
    "The itunes library file cannot be saved.  You do not have enough access priviliges for the operation."
    Does anyone know why this is appearing and how to get rid of it?
    Thanks

    See if these help
    the iphone cannot be synced. you do not have enough access privileges for this operation
    Re: access privileges ????
    Re: Access Privileges
    The iPhone "phonename" cannot be synced. You do not have enough access privileges for this operation

  • "There are no shares available or you are not allowed access them..."

    I'm admittedly a bit rusty, last time I set up a Mac OS server was 10.4. I'm having a huge problem setting up basic file sharing and it's driving me nuts!
    For testing and trouble shooting I've set up a single share, a single user and added that user to a single group. I enabled all services for the user. I then set the POSIX permissions on the share to read and write for the user and the group. I also tried additional ACL permissions to full control. No matter what I do I still get "There are no shares available or you are not allowed to access them on the server". I can log on any admin account with no problems, but I can't get standard accounts to connect! I've tried stopping and starting AFP service with no change. I've re-read all the AFP and permissions sections of the admin guides and the server essentials book. From what I can tell this should all be working. What am I missing?
    Thanks in advance

    Hi Jason
    +"What am I missing?"+
    SACLs perhaps? What are SACLs? Service Access Control Lists. Where are they? Server Admin > Server Name > Settings > Access. After installation 10.6 Server (by default) toggles Access for all users to the more limited setting below it.
    HTH?
    Tony

  • Cannot synch iPhone because it gives me an error message..."iPhone cannot be synched. You do not have enough access priviledges for this operation."

    Cannot synch iPhone4 because it gives me an error message &quot;iPhone cannot be synched. You do not have enough access privileges for the operation&quot; However, both the iPhne and computer are both mine...please help!

    It may be the cache folder with problems, you can check this discussion on the issue to locate folder and try that solution.

  • I can not connect my I Pad to a Samsung TV. Does the following make any sense?     Dear Phillip Baker,   Thank you for contacting Samsung Electronics.  We understand that you are not able to movies on the iPad on the TV.   We are sorry to say that you can

    Will the I Pad 2 connectr to a Samsung TV to play a movie from I Tunes.  Samsung sent the following.
     Dear Phillip,
     Thank you for contacting Samsung Electronics.
    We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can connect devices which are DLNA compatible and PC or laptops which are
    installed with PC Share manager. If the iPad supports DLNA, you can connec it to the TV and play the files
    supported by the TV. The TV supports following file video types : MKV, AVI, MP4, WMV, MPEG, MPG, ASF, 3GP, TS, TP, TRP. If you have any other questions, please feel free to contact us.
    Thank you. 
    Samsung Online Support.
    Any help?

    What method of connection are you trying to use? DLNA looks like a standard for sharing media between devices over your home network, but I'm fairly certain the iPad doesn't support this protocol. Apple sell adaptors to connect your iPad directly to TV using composite or HDMI connectors. I'd be surpsied if your TV won't support either of those.
    tt2

  • I have a pop up saying new software for Iphone available;however when I try to downlaol it says"you are not connected to the internet"

    I have a pop up saying new software for Iphone available;however when I try to downlaod it says"you are not connected to the internet"
    I am connected so I ran diagnostics which verifies my Network Interface but Internet Connection Failed as did secure link to Itunes store.
    In addition whenever I go into Itunes after a few seconds my AOL home page keeps popping up.
    As you see my ISP is AOL and my connection is through a Netgear wifi router.
    Please advise appropriate action
    Mike Hillyard

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • You are not authorized to display the panel for selecting a power plan

    I'm running Windows 7. Installed "Power Manager" via System Update 4.0 last night (10/23/2009). Getting this error when hitting FN+F3.
    You are not authorized to display the panel for selecting a power plan.
    Furthermore, I'm unable to see any of the default power schemes. Finally, I created two new power schemes, neither of them display for selection.
    Any one else experiencing this issue?!?!?

    Welcome to the forum!
    Hmm...  That seems odd.  Does the userid that you're using have admin rights to the machine?
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Maybe you are looking for