"you are using an illegal copy of this application"
My iMac crashed last night. I powered it off and restarted it. From that point on, Civ V won't run. I installed it from the app store, paid for all the extra content, but now it says "You are using an illegal copy of this application" when I get to the screen where I would launch Civilization V: Campaign Edition. Clicking the Restore Purchases button gives me an Apple ID login prompt, but it never completes.
Any ideas how to get this fixed?
The App Store, iTunes and other Apple connection problem seem to have been corrected.
https://www.apple.com/support/systemstatus/
Similar Messages
-
CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product
I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
I have dedicated to the VM:
4GB ram
4 CPU's (tried 2 and 4)
80GB Hard Drive
What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
Any input is appreciated, thanks!We only support ESXi
Sent from Cisco Technical Support iPad App -
Dear All Good day
i have Lync server 2010 and runing Good
yasterday some users cann't open Lync Client and give us this error Massege
microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
registry . please uninstall and then reinstall lync.
but another users runing Good
i'm try to unistall lync Client and install again but same problem
and Try to Install New server lync 2010 but same problem
please help me for resolve this problem
Khaled Eldosuky
Senior System Engineer
[email protected]Hi All,
I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
All i see is the below message....
microsoft
lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
Regards,
Venkat -
For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?
Step by step, how did you arrive at seeing this agreement?
-
The version of GroupWise you are using cannot access this post office
I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis -
Hello all,
I have SQL express 2014 advance edition installed ..
and i am connecting SQl server 2008 r2 instance which is in network
while creating datasource in Reportserver which has Express installed ..
got this error ..
please help me how to connect to remote server
Dilip Patil..Error message says it all.
With SQL Express, Data source should be local SQL DB.
With SQL Enterprise, Standard, BI edition, you can create Data soruce which are hosted on other servers.
Please refer similar thread:
https://social.msdn.microsoft.com/Forums/en-US/c0468e3f-bad7-47a7-a695-75c13762280a/the-feature-the-edition-of-reporting-services-that-you-are-using-requires-that-you-use-local-sql?forum=sqlreportingservices
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP] -
When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up. Do I need this software? Can I just download the pictures to my Mac without using the Canon software?
When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
Do I need this software?
Probably not - exactly what about it do you want?
Can I just download the pictures to my Mac without using the Canon software?
Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
LN -
When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?
Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Be aware that TenFourFox doesn't support plugins.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ -
I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router. My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada. Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems. Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web.
I believe that things may be happening in the background from various Apps that use quite a lot of Data. It could be that iCloud is part of the issue with things being backed up automatically. It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc. I typically turn off the App Store "Updates" such that they don't automatically load. The FaceBook works now posted videos play when you are just scrolling through the News Feed.
I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on.
Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?Thanks for your comments, it is clear you understand my plight. The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night). Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part. Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out. All App Updates if set to Automatic also can add up to quite a bit of Data. Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data. There could be other culprits that I am not even thinking of. I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely. Again thanks for your quick response.
-
[Blog] If you are not scaling Oracle WebLogic like this, then you're doing it wrong
If you are not scaling Oracle Middleware like this, then you’re doing it wrong
We have all built an Oracle Middleware box from scratch once. But, if you ever build an Oracle Middleware box from scratch twice, you’re doing it wrong! (click to tweet). Okay, maybe that is a little extreme. Surely there are some business requirements that justify building multiple Middleware deployments from scratch, but you should certainly do everything in your power to avoid it. Here’s how you should be implementing Oracle Middleware with today’s tools. (If you don’t feel like reading, jump to the end to see how Blue Medora makes your life a whole lot easier).
Oracle Middleware is designed from the ground up to be both vertically and horizontally scalable. Unfortunately, most implementations of Oracle Middleware do not effectively leverage these capabilities and many admins focus only on scaling vertically. To maximize your Oracle Middleware investment, you must have an appropriate strategy to horizontally scale within your private/public crowd.
Continued: If you are not scaling Oracle Middleware like this, then you’re doing it wrong | Blue MedoraI'm not entirely sure that you are right or wrong on the phone recording issue. As soon as I hear the Verizon message state that "This call may be monitored or recorded for quality and training purposes" I flip my recorder on. I always tell Verizon that our call is either being recorded likewise or that it might be monitored by other ears. I do this at the get go so that names are recorded and I hear their response. A lot of the times the reps, some who work in a call center and some who work from home, some surrounded by screamin younguns and barking dogs and cats fighting....they will flat out refuse and say that THEY don't record the calls, that someone at Verizon does, and if you want to get a copy of the recording that there is a number to call, "I'll get that number for you, one moment........::click.::" Some say, "Don't tell em you're recording since they told you the call is already." The recordings says "MAY" which isn't a guarantee that it is. Best to be upfront since, if the rep[ knows their stuff, they might not mind as much and there's nothing like trying to use in-admissible evidence.
-
I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.
These are the ways I tried
1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
2) I uninstalled restarted my machine and installed it again still no use.
3) I installed SPD 2010 Service Pack 2 of 64 bit
4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
How to solve this issue?
I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?Please update us SharePoint version
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
Not able to sync movie purchased from itunes from imac to ipad2.
try this:
redmatter
This helped meRe: not copied to iPad because you are not authorized for it on this computer
Nov 20, 2011 10:41 AM (in response to hoppo72)
One workarwound is to do the following:
1. Remove the digital content from iTunes (but keep the files)
2. Rename all .m4v files to .mp4 files
3. Add the files back to iTunes
This seems to fix the problem for me
Hope this helps -
Can you unplug the external hard drive you are using for time machine
can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?
Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.
-
The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support
Maybe you are looking for
-
SAP Early WatchHealth Check Report
Hi Folks, I am trying to generated SAP Early Watch Health Check Report from my dual stack system but the JAva data are not populated. On the other hand, the JAva data are populated in EWA report. Does SAP Health Check Report not support Java data?
-
Can't edit the message popup in teststand 4.2.1
Hi, I installed the 2010 version of TestStand on my PC. Everything has been fine until today. Every time i try to edit a property loader I get the following error: Error in cal to LoadPanelEx. Parent Panel Handel: 0 UIR File Name: PropertyLoaderUI.ui
-
OamAuthn cookies are not set with encrypted value in https login with FFbro
we have developed a custom login page which is deployed on oam server itself . In custom login page we are passing 3 userinfo like username ,passowrd and request id as part of authentication parameter . We have developed our own javascript to pass al
-
How do I download creative cloud onto my desktop?
This may sound silly but I have nooo idea what I am doing.
-
my video messaging shows the picture but when i go to play it, the video says unable to play video message try again later. why? what can i do?