You can configure Speed Dial using your Cisco IP Phone

You can configure Speed Dial using your Cisco IP Phone
Please check the video: http://youtu.be/ue7gyRj8n9w
For more information please mail to [email protected]

I think that eventually these darn things just break - at least that's my experience. Does anyone know of a cool quick fix for a stand that won't stand.
Thanks!
This topic first appeared in the Spiceworks Community

Similar Messages

You can only log in using your primary BigPond Broadband account

Hi I recently moved from QLD to WA and moved my bundle with me, I had foxtel on tbox over there but the box got left in the move so I bought another one today. I have tried to register it but it comes up with the following message ' You can only log in using your primary BigPond Broadband account , If you can’t remember your primary account username and password, you will need to speak to a Customer Service Representative on 1800 331 402 So after calling the first time the lady registered the tbox and I thought that would be me on my way so I hung up and tried to get foxtel on tbox. Ended up getting the same message and now my tbox does not appear to be registered at all. So after another call which lasted around 30mins of me being on hold and a 3 way conversation where both telstra members were trying to fob responsibility off to each other and one being quite rude I was told I would be called back.. After another half an hour the guy called back and said that I could not get foxtel on tbox at my address. To me this seems like Im being fobbed off as he didnt know what the problem was, I am in a unit and I checked my address on the telstra website which stated 'great news, foxtel on tbox is available in your area' and after being told I couldnt get it, I put a note on the notice board of the aparment block to see if anyone else had foxtel and they do so clearly that is not the problem. Can anyone advise what to do or who to speak too to try and clear this up? Thank you

There are times like this I wish I could log in to customers accounts and fix it however not allowed ESQ check which is a serviceability check and checks what services are available at your address. So if it says Foxtel Tbox is eligible then its all good to go then this wouldn't be the problem mate. What needs to happen is that your email address and serial number might be still on the admin portal of the tbox registration. However you said Tbox support have removed this from the account in saying that this can take a little while to be completely removed from our records which would then allow you to register a new device. Try the registration a little later on or again tomorrow and see how you go. Please let us know how you get along. Cheers bud.

Is it true you can give the apple store your old i phone and get money from it?

my friend told me if you give the apple store in australia your old iphone you can get like some cash and or another one idk but does it work with iphone 3s ?

Take a look at this link, http://www.apple.com/recycling/gift-card/ you will be able to get more selling it on eBay.

Can you set up speed dials?

can you set up speed dials for numbers you call often?

Depends on your definition of speed dial. There is a Favorites list that works well. There are also some apps that allow you to put a one-tap icon on the home screen to make a call. There are no keypad combinations that wil speed dial.

I was trying to sync a song from my computer to my iPhone 4 using iTunes and it said you can transfer the music from your phone to your itunes if you want to sync it so I did and none of my music is on my phone or on itunes besides the song i was syncing

I was trying to sync a song from my computer to my iPhone 4 using iTunes and it said you can transfer the music from your phone to your itunes if you want to sync it so I did and none of my music is on my phone or on itunes besides the song i was syncing

Hi Soccer4461,
If you need to update your iTunes software, you may find the following article helpful:
OS X: Updating OS X and Mac App Store apps
http://support.apple.com/kb/ht1338
Regards,
- Brenden

I can't download the app '12 days of christmas'. The app details say that you don't need to use a device and that you can "download the gifts from your computer". How do I do this?

I don't have the latest ipod touch and therefore can't download the app '12 days of christmas'. The app details say that you don't need to use a device and that you can "download the gifts from your computer". How do I do this, as I know its not possible to diretly use an app on a computer?
Thanks
Chris

Go to the Purchases Tab in the App Store and Accept the apps.
Then you'll be able to update them.
Regards
TD

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

Configuring Speed Dials in CUCM

Hi
One of our secretaries has two 7914 expansion modules on her 7960 desk phone and I'm having some trouble setting the speed dials up on them again after her phone was deleted from CUCM to resolve a problem. I'm using CUCM v8.
Here's what I have managed to do:
-Create the phone
-Create a unique template and add all the extra speed dials using the 'Modify Button Items' window to add them on one at a time
-Enter the speed dial extension details
It's at this point that I hit probems. The first five speed dials - on the phone itself - appear correctly, but those on the expansion modules do not. As far as I can tell all the information is entered correctly, all the speed dials appear in the Association Information pane in CUCM, number 7 onwards underneath the 'On Addon Module(s)' header:
Unfortunately, while plaing around trying to find a phone configuration that works I now cannot add the speed dials in the 'Modify Button Items' window. I receive the below error:
Can somebody advise how I go about resolving this error and seting up the speed dials correctly?
Thanks
Alex

Hi Alex,
Without seeing the phone configuration screen, I would have to say you are using a template that is not made for a 7960 model phone or the device you have built within Call Manager is possibly not a 7960. If you can include a screenshot of the phone config that may clear some things up.
Thanks,
Tony
Please rate helpful posts!

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

Family of 5, all use the same Apple ID/Password/Account. In settings/messages/send recieve you can "check" my email and up to three phone numbers. Essentially allowing all iMessages to be sent

Family of 5, all use the same Apple ID/Password/Account. In settings/messages/send>recieve you can "check" my email and up to three phone numbers. Essentially allowing all iMessages to be copied to shared account numbers. Please help me figure out how to prevent my children from recieving my text correspondence.

On the devices for the members of your family that you DO NOT want to see your iMessagees, go to
Settings App
Messages
Send and Receive
You should see a list of available contacts which would make messages appear. Make certain that each family member has their own individual contact and NOT the same one that you use. I find it useful to have each family member have their own icloud email and use that for iMessaging my kids. My kids do not have iPhones, but if yours do, their phone number should be listed as well. For iPads and iTouches, use icloud email addresses. If you need to send a message to all 3 kids, say, you can just add all three emails to the To box on your iMessage.
Hope that makes sense.

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)
Let me explain:
In the clock app for ios 6.0.2 I am a little confused. It allows you to go into your music library, and create a ringtone using any songs you choose. However, I cannot find a way to remove a song from this list, just like I cannot delete one of the preset ringtones (which I'm not trying to do, but just as an example)
Thanks for your time! If you need more information just ask.
(I believe both my iPod and iTunes are up to date)

I believe you just are able to delete them from iTunes.
Hope it will be helpful

Is it possible to lock a 3G sim pay as you go so you can chose to only use it once all WIFI possibi

is it possible to lock a 3G sim card pay as you go so you can chose to only use it once all WIFI possibilities have been tested?

You can turn off Cell Data in the Settings. Your iPad should then not be able to connect to your cell service until you turn that setting back on.
Regards.

Can't be true that you can't add coverart to your ripped cd's if WAV?

Hi
Is it really true that you can't add coverart to your ripped cd's if the format is WAV?
That's just ridicules if you can't...
Regards
Pwter

Junkwavepete wrote:
Hi
Is it really true that you can't add coverart to your ripped cd's if the format is WAV?
That's just ridicules if you can't...
WAV as originally developed does not support embedded artwork. It is also very limited even for simple text based meta-data. AIFF also as originally developed (by Apple) did not support embedded artwork but Apple have added the ability to do this and this works in iTunes for Mac and Windows. Some other applications can also read such embedded artwork in AIFF files but not WMP.
If your looking for a lossess file format to use that supports embedded artwork for iTunes, then I suggest using Apple Lossless which uses the MP4 file format and MPEG4 meta-tags, these are the same as used by AAC.
It is possible to use Apple Lossless files in WMP and Windows Media Center, but not alas to read the embedded artwork in WMP. I use embedded artwork in Apple Lossless for iTunes and iPod and iPhone, and then use a folder.jpg for WMP.
Note: I have all my music in Apple Lossless playing fine in WMP.

Where do you find the ringtone tab on your personal itunes so that you can sync new ringtones to your iphone?

Where do you find the ringtone tab on your personal itunes so that you can sync new ringtones to your iphone? I am trying to get ringtones from my ringtone app onto my phone and the directions said to click Ringtones on the top of iTunes. I am having trouble finding the Ringtones on the top of iTunes.

Go to edit then preferences in itunes on your computer and then check the box TONES and then click OK. with your phone attached to your computer with USB cable select the name of your phone on the left and then in window on right select TONES from the menu items across the top of the window

I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

go to settings
then to store
tap your id then click sign out
then sign back in and you should be fine

You can configure Speed Dial using your Cisco IP Phone

Similar Messages

Maybe you are looking for