You can't open the application NotificationExec because PowerPC applications are no longer supported
I have Lion OS X 10.7 on my MacBook Pro 15'' and I've tried to install an application for an external Maxtor hard drive.
But it seems to be compatable only with previous Operating Systems because now every 5 seconds I get the popup
"You can't open the application NotificationExec because PowerPC applications are no longer supported".
I have deleted all the applications of the external hard drive from the Applications folder, and from the trash as well.
But it doesn't help because the message is continuing to pop-up.
Please help me somehow.
I had already formatted the external Maxtor external hard drive but it didn't help because the problem came when after formatting I tried to install an application (belonging to Maxtor) to the MacBook. The application was meant for an operating system previous to Lion.
The solution is to remove everything belonging to Maxtor from your Mac.
I deleted the Maxtor application from the Applications folder, but it wasn't enough. After struggling in google I found this solution and it worked!
HERE IS THE SOLUTION:
First remove all the Maxtor applications you've installed from the Applications folder (just trash them and empty the trash).
Then go to Finder and from Macintosh HD -> Library -> Driver Support -> DELETE THE MAXTOR APPSYOU FIND IN THIS FOLDER AND EMPTY THE TRASH !
But the Library folder is hidden, so if you don't know how to find it (I don't remember exactly because I did it at 1 am at night in the desperation after looking for the solutions in many forums for hours) you can go to Helpand write library, then from All Help -> what is the Library folder? and there it is explained!
Now you are free!!!
Similar Messages
-
I can't open the app PACE because PowerPC application are no longer supported
I need solution
PowerPC apps are simply not supported in 10.7. You can update the app, replace it or downgrade back to 10.6.
-
Shortly after upgrading to version 10.7, I installed an application that was not compatable with the LION operating system. The application was for an external Maxtor hard drive that appearantly was intened for an earlier Mac operating system.
Now I get the popup "You can't open the application NotificationExec because PowerPC applications are no longer supported" about every 10 seconds.
How to I get rid of this.
There is nothing to Force Quit. The process (if it is a process) does not show up in Activity Monitor. I have also tried to use the KILLALL command but no process is found by that name.Absolutely frustrated by the same problem, just lost 3 hours of my day trying to uninstall after getting the same error message. The ONLY thing that worked for me was going to the following Maxtor (Seagate) URL:
http://knowledge.seagate.com/articles/en_US/FAQ/199931en
I downloaded their "remove maxtor sw.zip" file
Click here to download the remove_maxtor_sw.zip file and store it on your system's desktop.
And it worked perfectly. Took 10 seconds and - after restarting - it was done.
What a waste of the day!!! -
I have an iMac with Lion 10.7.4 and tonight I tried to download and install a Maxstor drive from the internet, since then the following notice has appeared on my screen at approximately 6 second intervals. “you can’t open application NotificationExec because PowerPC applications are no longer supported” I have removed the Maxtor manager via the waste basket but the notices keep appearing. Is there a way for me to stop these as they make my iMac virtually unusable or is this a virus?
none of the above worked for me....this worked after hours of messing around with Libraries, deleting things, etc.
Absolutely frustrated by the same problem, just lost 3 hours of my day trying to uninstall after getting the same error message. The ONLY thing that worked for me was going to the following Maxtor (Seagate) URL:
http://knowledge.seagate.com/articles/en_US/FAQ/199931en
I downloaded their "remove maxtor sw.zip" file
Click here to download the remove_maxtor_sw.zip file and store it on your system's desktop.
And it worked perfectly. Took 10 seconds and - after restarting - it was done.
What a waste of the day!!! -
I am running Lion (OS X 10.7.4) and trying to reinstall iLife06, a .mpkg file, using Installer.app. I get a message "You can't open the application iLife06.mpkg because PowerPC apps are no longer supported." Is there a work around?? Thanks in advance for any help that can be provided.
The only workaround would be to purchase the current version of iLife apps from the App Store.
Lion doesn't support the old PowerPC architecture anymore, which is what iLife '06 was written for.
If the internal apps are universal, right-click on the mpkg and choose Show Contents. Then, dig through and run the specific installer package for each application. -
Just purchased a new mac with Mountain Lion installed. My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.
First try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it does then make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
On PowerBook G4 OS 10.5.8 my chess App tells me "You can't open the app 'chess' because it is not supported on this architecture. It has worked before. What does that means? What can I do to get it working?
It sounds like you might have accidently copied Chess over from an Intel Mac, or an Intel Mac's installer DVD. The architecture typically means it is designed uniquely for either Intel or PowerPC. Be sure to extract Chess from the 10.5 Retail installer disc that looks like * and not any other disk. http://www.charlessoft.com/ 's Pacifist lets you extract individual applications from installers without having to reinstall everything.
-
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds. -
Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?
OK, fixed it. Found that iPhoto is now BACK in the App store.
Found iPhoto app in Finder and dragged it to Trash.
Downloaded iPhoto from App store and all now back working again.
Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
Nige -
I'm tring to install a d2 quadra external drive but can't use the setup assistant because "PowerPC Applications are no longer supported". Anyone have any ideas?
You shouldn't need to install anything just to use the drive. Just connect it to your Mac and it should mount. If it's the Intego Backup Assistant you're trying to install, try the latest version which you can download here:
http://www.lacie.com/products/product.htm?id=10323
Regards. -
i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??
You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.
-
I cant open an important application because powerpc apps are no longer supported. what to do please
Can someone please advise on resolving issue I cant open an important application because powerpc apps are no longer supported. what to do please
using macbook airiOS doesn't run on MacBook Airs.
Use this tip to identify your MacBook Air:
How to find your Mac's model and age?
Only MacBook Air 4,1 and later can't run Snow Leopard natively.
That said, there are options with this tip if it turns out you do have that MacBook Air or a later one:
https://discussions.apple.com/docs/DOC-6841
To find all your PowerPC Apps see this tip:
https://discussions.apple.com/docs/DOC-6271 -
I upgraded my iMac to Mountain Lion and now my Canon Pixima MP500 will not open because PowerPC apps are no longer supported! Has anyone experience this problem?
Correct. Applications designed to run on the old PPC Macs (which Apple stopped making in 2005) cannot run on Mountain Lion.
You need to update your printer driver:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US -
Adobe reader 6.0 app won't open because PowerPC apps are no longer supported
I can no longer open .pdf files on my newer imac which is over 3 yrs. old, This issue seemed to have started sometime after updating to icloud & Lion?? on this imac but for some reason, I do not have the same problem on my other imac that is running the same Lion v. 10.7.2 which is over 4 yrs. old. I can see that the older imac is running Adobe Reader 9.4.6 and opens .pdf files.
Here is the error message I get on my newer imac:
adobe reader 6.0 app won't open because PowerPC apps are no longer supported
I don't remember if or when I started having this problem on the newer imac but it use to open .pdf files. Nor can I find any reference to ANY Adobe Reader version other than 6.0 on this computer, Even after several tries and downloading off the Adobe web site using Safari.
I have made several attempts to download off the adobe web site using safari which shows it is downloading the app. but cannot find it anywhere on my computer's HD or Desktop even when using Spotlight to search for it.
In fear of screwing up my new 17" MBP which arrived yesterday I have not attempted to transfer any info/files/data off of my other imacs due to they info dating back to the PowerPC days that transfered during switching to newer mac models.
Thanks for any help in this matter
BobI have tried several times to update the Intel Mac verision of adobe but cannot find where it was downloaded to on my computer. When I do a search on my computer, the only version that is found is the old 6.0 Power PC which is no longer supported.
Message was edited by: keyag -
I just bought and downloaded LION and now I get a box that says Microsoft Word and Excel can not open because PowerPC Apps are no longer supported. How can I reactivate Word and Excel.
You need to upgrade to Office 2008 or newer, or switch to a product such as OpenOffice or iWork.
(61340)
Maybe you are looking for
-
Search in Mail doesn't find simple words in message subject - why?
I've not found Mail's search tool to be very useful. Searching for "Itinerary" does NOT find my flight itineraries in the Gmail mailbox. However putting a space in front of the word, as in " Itinerary" will find the messages I'm looking for. It is ni
-
Hi All I have query duty in stock in this report material are showing in the letters and kg for example -1234 material is showing in letters and kg also my user wants to see the report only in leaters.And one more thing is that in R/3 data source bac
-
[CS4] How to get path from SPPlatformFileSpecification on mac ?
Hi all, sADMBasic->StandardGetDirectoryDialog() return the directory selected by user in SPPlatformFileSpecification type variable. when I select the any directory i.e desktop SPPlatformFileSpecification structure contains the following values--
-
DDE Errors with Adobe Reader 9.3.4
Hi, I'm trying to develop an assistive technology for blind people to use PDF-documents in a planar and two dimensional way. In this manner I would like to control the AdobeReader to show a document automatically in the way I could best handle it. So
-
Adjust Image window disappeared
I have a Macbook - it looks like the Adjust Image Window for Keynote is to the left or right of the screen beyond view. How do I get it back? cp