"You cannot install iWeb Update on this volume. A qualifying copy of iWeb was not found in /Applications" How do I fix this?

"You cannot install iWeb Update on this volume. A qualifying copy of iWeb was not found in /Applications." How do I fix this?

Version 2.0.4 is iWeb 08 and direct publishing via ftp is not available in iWeb 08 and never has been. You have the option of publishing to MobileMe, but you can publish via ftp, but you need to select the option publish to a local folder instead and then upload using Cyberduck, which is a free and dedicated ftp client.
If you want the inbuilt ftp function, then you will need to upgrade your iLife package to either iLife 09 which contains iWeb 09 or iLife 11, which also contains iWeb 09. For this, you need to purchase both of these packages. Either go to Amazon and try and get a copy of iLife 09 more cheaply or purchase iLife 11 directly from the Apple store.
This is what you will need to do and iWeb 08, which is the version you have, never has had built in ftp so that option will never be available to you unless you upgrade which you will have to pay for. Upgraded and updates are different things. Updates are just your normal run of the mill software updates and address bug fixes etc., whereas you will need to pay for full upgrades to other packages such as from iLife 08 to iLife 09 or 11.

Similar Messages

Getting this:You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?

I am getting this message: You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?
is there a way to install this update?

Hello
More information would be useful, for example which Mac OS are you running.
On the left menu item  About this Mac provides useful information.
Also did you use Software Update to determine the update?
Using Software Update can ensure you download and install the correct package for your particular Mac and OS version.

I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......". please help.

I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......".
please help!
imac specs:
IMAC 24 inch Mid 2007
Intel 2.4 GHz 2 duo
4GB SDRAM
OS X lion 10.7.4
200 GB Harddrive space free

Tell us more about the disk and partition onto which you are trying to install Mountain Lion:
Open Disk Utility (in Applications > Utilities). The left column should show your disk with its partition(s) indented below it:
How is the disk (top level container) formatted according to Disk Utility:
* What Partiton Map Scheme? (Should be "GUID Partition Table".)
* How many partitions? (Should be 1 unless you have a Boot Camp partition.)
How is the partition (lower level container) formatted according to Disk Utility? (Should be "Mac OS Extended (Journaled)".)
Message was edited by: markwmsn
(image inserted)

"You Cannot Install OS X on This Disk. OS X cannot start up from this disk".

Hey, I am running Lion on a Macbook Air 2010 model and i recently bought Mountain Lion through the MAC App Store. ive had problems installing it as i cant install it onto my Macintosh HD (startup Disk). Ive opened the ML installer and its rebooted my mac into the installer Menu, but when it goes to install, it stops and says You Cannot Install OS X on This Disk. OS X cannot start up from this disk." i want to be able to install ML overwriting Lion on my MacintoshHD (startup drive), are there any solutions that can fix this problem?

Glad to hear it!
I ran into another problem: The USB cable I was using for my external backup disk was not reliable. I kept getting "disk ejects" at various points during migration.
I bought a new "2.0 certified" cable and it worked fine. The first two attempts resulted in re-installs.
I'm happy to report that after the 3rd re-install of ML everything appears to be OK.
I disabled TM and keeping my last b/u offline for a few more days to be safe....

Apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

You can try installing 7-Zip (free), then right-click on the iTunesSetup.exe or iTunesSetup64.exe file to unpack its contents, and install AppleApplicationSupport.msi as a standalone component. It may still not install successfully, but if it doesn't you may get a more useful error message regarding the reason why.
See also Troubleshooting issues with iTunes for Windows updates.
tt2

I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2

Apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2

I can't install itunes for windows 7 to 64bit i tried several times and at the end show up this...
"apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2" ..so what it does mean? ..can somebody help me for this please? thanks

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Updating hybrid configuration failed - Kerberos authentication: The network path was not found

I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
When I run the Manage Hybrid Configuration, I receive the following error:
Updating hybrid configuration failed with error
'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
path was not found.
The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
[1/5/2014 21:21:1] INFO:Opening runspace to
http://[servername]/powershell?serializationLevel=Full
[1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
[1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
   -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
   at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
   at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
   at System.Management.Automation.Runspaces.RunspacePool.Open()
   at System.Management.Automation.RemoteRunspace.Open()
   at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
   at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
I have sought help, posting on the forum at community.office365.com -
http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
Has anyone else come across this problem running the Hybrid Configuration Wizard?

Hello Darrell,
Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
looks good.
As the article states you can run the Exchange BPA and it will check if any of these exist as well.

When i try and burn a cd it tells me that a disc burner or software are not found...how do i fix this?

when i try to burn my music onto a cd it tells me that a disc burner or software can't be found...how do i fix this??

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

While installing app updates on my original iPad, my wallpaper reverted to black, my folders disappeared. How do I fix this?

While installing app updates, my wallpaper for both Home & Lock Screens reverted to black and cannot be re-set. All folders disappeared as well. What now? RESET?

Yes, reboot: Hold the power and home buttons at the same time for at least 10 seconds (keep holding past the swipe to shut down bar if it appears) until the Apple Logo appears, then let go of both buttons and your iPad will restart. Hopefully, things will be back to normal.......

I'm using a Intel Core 2 Duo Mac OS X 10.4.11. When installing the Seagate FreeAgent GoFlex portable hard drive, I find an error in the logs - "dyld: Symbol not found: ___stack_chk_guard". How do I fix this? Thanks,

I'm using a Intel Core 2 Duo Mac OS X 10.4.11. When installing the Seagate FreeAgent GoFlex portable hard drive, I find an error in the logs - "dyld: Symbol not found: ___stack_chk_guard"
Referenced from: /Volumes/Mac Installer/MacInstall.app/Contents/MacOS/MacInstall
Expected in: /usr/lib/libSystem.B.dylib
How do I fix this? Thanks,

OK, OSX can read that but not write, but...
A few options...
You could format that HDD as Fat32/MS-DOS, but you'd be limited to 4 GB Filesizes.
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

Re: E540 bios update to 2.17 fails, the system program file was not found

Unfortunately all versions of the BIOS available from Lenovo's site have a bug that doesn't play well with linux. The workaround is to turn OFF USB 3.0 in the BIOS settings. (You can still use the USB ports, just not as USB 3.0.)
Here's a posting with more links if you would like to learn more.
As for updating the BIOS, maybe one could get the updater to work using FreeDOS bootable image, or more likely a linux image with WINE on it... ?
On my new E540 I "cheated" by keeping Windows 7 cluttering up my hard drive for awhile. I have booted Windows only twice, and I NEVER let it connect to the Internet, but I downloaded the .exe version of the BIOS updater and ran it from a USB stick. (It runs as a Windows software installer, which is odd to me.)
2/23/15 EDIT: Message moved to front of discussion for escalation purposes. Amy_Lenovo
Solved!
Go to Solution.

joonasr wrote:
I bought this laptop without any system and now the Bootable CD fails to update terribly buggy BIOS. Well done Lenovo. Could be my last Lenovo comp
@conwaytwt How could FreeDOS be used for updating BIOS? I don't think wine will work.
By the way, I tried extracting bios files from the .exe according to different advice in http://www.thinkwiki.org/wiki/BIOS_Upgrade but they failed.
@joonsar, I made that comment without thinking too much ... I have other (older) systems where the BIOS upgrades were always released as DOS executables... because they would run in Windows but also if your system had a floppy disk drive... :-) (obviously very old information nowadays).
Here is a link describing what I was imagining -- a bootable FreeDOS image: http://pingtool.org/bootable-dos-iso-bios-upgrade/ -- note this person combined FreeDOS and some Windows utility to make a bootable disc image. I suspect you could cobble together something similar using linux utilities, too.
--> HOWEVER I do not know if the bios upgrade .exe provided by Lenovo can run in DOS mode... I haven't tried it.
ANOTHER option (I haven't tried!!!) would be to create a bootable Windows PE image. I believe there are some around, but now that I look, all the procedures involve creating the image from within a Windows environment (a Google search points to several options). Oh and of course Windows PE technically requires an existing Windows license, though I don't think it checks.
Making a DOS image...
Today I realized the Ubuntu USB "Startup Disc Creator" only seems to work with linux images (maybe only Ubuntu). To create a FreeDOS USB you'll need to install unetbootin and use that utility. As it turns out it can make a bootable USB from (an older version of) FreeDOS on its own, but I just used it to create a FreeDOS 1.1 image. (just to see if I could)
UPDATE: I installed FreeDOS 1.1 to the USB stick with unetbootin. I couldn't get it to boot. SO I had unetbootin create a FreeDOS 1.0 image. It booted, but I didn't play with it long. The next step would be to try copying the Lenovo BIOS update .exe to it to see if it runs, but I don't want to run it again on MY system....
I did notice unetbootin knows how to create all sorts of images on its own, including some other kinds of rescue images, but I haven't read about them.... you might have a look?
Here's what I did (a week or two ago) to update my BIOS:
I still have Windows cluttering my hard drive for just this reason (based on sad experience with a Dell). I downloaded the .exe file and copied it to a USB stick, booted into Windows, and opened the .exe file. The software ran as a Windows installer. It asked me to approve it, installed something somewhere, and then asked me to reboot Windows to do the actual install. BY THE WAY, the actual install looked sortof like a DOS installer, so it's POSSIBLE the .exe might run under FreeDOS.
P.S.: Lenovo seems to have done something odd to their own bootable disc image to make it look "empty" to some linux software -- I confirmed there IS an image in the file (you can dump it and see things in it) but the Image Mounter and other linux utilities think it's an "empty" file. I suspect you could modify a character or two somewhere and make it easier to burn or make a USB stick in linux.

Disc burner or software not found...how do I fix this?

Trying to burn a cd from itunes, never had a problem before and i get the message "disc burner or software not found'
How do I rectify this?
I have a Mac version 10.6 software and itunes is up to date.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Hard Disk - (3F0) BootDevice not found" Error Message how do i fix this

Hard Disk - (3F0) BootDevice not found" Error Message

Sounds like the hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance you have a 320GB hdd now so you could use a 500GB hdd but not a 250GB hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

When I search using my address bar it comes up and say page not found jar file, how do I fix this?

File not found
Firefox can't find the file at jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.

hello Kygirl, please install the search reset addon - it will revert the most common customziations those adware programs do in firefox back to the default (including the keyword search from the location bar): https://addons.mozilla.org/firefox/addon/searchreset/

"You cannot install iWeb Update on this volume. A qualifying copy of iWeb was not found in /Applications" How do I fix this?

Similar Messages

Maybe you are looking for