You cannot post to asset 150000 0 (investment support measure)

Hello All,
I am getting Error while doing KO02 Order settlement
I selected Cat - FXA and select asset (asset under construction)
When I am trying to save
You cannot post to asset 150000 0 (investment support measure)
with Message Number Message no. AA311
Regards,
Kiran.

Hi,
You cannot directly include settlement rule for AUC. This is automatically included after settling.
1. Create an Internal Order through KO01 and from that Extras --> Create AUC.
2. Then you post expenses to AUC.
3. You settle the IO through KO88. When you settle the internal order automatically it would be settled to AUC which is in IO.
4. Check the IO you can see the settlement rule with AUC line item
5. Now select FXA rule and select the final asset.
This is will solve your problem and this is the procedure.
Thanks & Regards,
Giridhar Reddy

Similar Messages

  • You can not post to asset xyz ( investment support measure) ??

    Hi Guru's,
    I am trying to post some spending reclassed to an already capitalized asset. So in order to do this I have reactivated the project, resettled the spending to the asset and now I am trying to finalize the settlement to the asset by using tcode: CJIC... but keep getting this a hard error message:
    You can not post to asset xyz ( investment support measure) .....
    Any idea how I can resolve this ?
    Please help !! Thank You
    Best Regards,
    Yasmeen

    hi,
    it would be better if you write error message number in thread.
    hope you are using im module. if so check the system stastus of appr.request and try to settle to auc.
    check and do revert.
    regards,

  • You cannot post to asset in company code 0001 fiscal year 2009

    Hello,
    I am receving subject mentioned  error when I am posting asset to fixed asset. Please advise me  to rectify the same. I tried AJRW but couldn't succeed.
    Regards,
    Prashant

    HI
    Is your company code - 0001? since generally it is standard SAP company code and system would give such error untill you will execute any of the asset report or transaction with your correct chart of dep and company code, like AS02, if you will try to display any of the asset with your company code , then next time it will allow you to do the transactions.
    Further if your company code is 0001 and error is related to your company code only , then please run AJAB for the year 2008 (since you want to post in 2009) in test run and in foreground, it will give you error log , if anything is preventing year close.
    Complete the tasks of the year 2008 and close it , open the new year 2009 by AJRW.
    Also check the FI period if you are acquiring assets from MM then also check MMPV, all should be open for your desired posting date.
    Cheers
    Mukta

  • You cannot post to asset in company code 1000 fiscal year 2011

    please help in this regard

    Hi,
    The Asset Master which you are using might be for the year 2010.
    So you need to take different Asset No or if you want to continue with same ask your FI guy for that Issue.
    He will activate it for year 2011.
    Regards,
    Rahul Patil.

  • Error : you cannot oost to asset in cocode abc4 fiscal year 2009

    Hi Guys,
    When i create and release a  purchase order for an asset, Then i go to MIGO, here i am geeting the nessage
    "YOU CANNOT POST TO ASSET IN COCODE ABC4 FISCAL YEAR 2009"
    the long text description shows" A Fiscal Year Change has not been performed in Asset Accounting for Cocode ABC4,
    Procedur: Check the Asset Value Date

    Moderator: double post, thread locked!

  • Investment Support Measure-Settlement of IO to AUC

    HI Gurus,
    I have created investment order and AUC asset through ko04. Also crated budget for this IO in k022. posted invoice through fb60 to this IO. Now i am trying to maintain settlement rule in IO master data. (Settelling to the AUC created for this IO)
    While maintaining settlement rule, system gives following error message:
    You cannot post to asset 900014 0 (investment support measure)
    Message no. AA311
    However if i do settlement through KO88 settlement is done automatically (Test Run).  I want to maintain seetlement rule in Ko04
    Please Advice.
    Regards,
    Shekhar
    Edited by: Shekhar Sonar on Mar 29, 2010 1:10 PM

    Hi,
    Your order is not statistical because you cannot maintain settlement rule for statistical order.
    Even you see all the entries are displayed, can you check the order balance?
    KO03 > Extras > Order Balance
    The message informs you that the settlement is done, and there is no balance.
    If you need to know when the settlement is done, please check the settlement rule > First used & Last used field.
    You can also check the cost analysis as below to see the cost movement for order.
    KO03 > Extras > Cost Analysis

  • Unable to Close the Purchase order : You cannot post acquisitions to asset

    Hi All
    Purchase order unable to close due to asset being capitalised and captured in last FY.
    We are getting the below error message.
    You cannot post acquisitions to asset 125782
    Message no. AA394
    Diagnosis
    You want to post an acquisition to this asset. However, according to depreciation key Z620 that was used, acquisition postings are only possible in the year of the initial acquisition or of the capitalization date.
    Procedure
    Check the asset number, the asset value date and the transaction type. You have to create sub-numbers for subsequent acquisitions using this depreciation key. However, these sub-numbers cannot adopt their depreciation start date from the main asset number.
    Please help us to resolve the issue and how to close the Purchase order.

    Hi,
    Please notice that error AA394 may be displayed correctly due to customizing settings of the depreciation key in transaction AFAMA when setting field XNAZUG (Acq.only allowed in capitalization year)  > YES                                                                               
    The only workaround  is to change your settings regarding field 'Acquisition only allowed in capitalization year'   > NO                                                                               
    Also have a look at SAP Note No. 211283 to understand how the flag operates.  
    I hope this helps to clarify.
    Kind regards,
    Brigitte

  • Error Message- you cannot post write up

    HII friends
    I have an issue that our client have posted unplanned depreciation to one asset which is wrong on 31/3/07. now they want to write up the same on the same date. but system is not allowing the same date it is giving error
    YOU CANNOT POST WRITE UP.
    Message details:
    None of the areas to be posted in accordance with the transaction type entered manages one of the depreciation types entered or cumulative values
    Please help its very urgent///
    sejal

    this issue is solved

  • How to post a reduction of Investment support creted by ABIF?

    Hi All,
    in 2010 for an asset Iu2019ve posted an Investment support, by t.code ABIF.
    In 2011 a part of that Investment support has been revoked.
    Could anyone tell me how to post this reduction? Which t.code? Which transaction type?
    My investment support measure is u201CZIu201D. For this measure, SAP has created the tree follows transactions type:
    - IZI
    - JZI
    - KZI
    My SAP release is 6.0
    Thanks for your help.
    G.

    Hi : )
    I know this thread is quite old, but I recently had the same problem and was able to change an automatically created transaction Type eg. I, J and K using transaction AO73_INV.
    This allowed me to copy transaction type K and I was able to conigure my own transaction type for investment support which now allows posting of investment support refund without the retirement of the asset and reduces the amorisation as expected.
    Hope this helps : )
    Tanja

  • You cannot post write-ups

    Guru's
    we are getting this error message while posting the write up for a asset which has Accumulated depreciation for the pervious year as well as normal planned depreciation in the current year.
    You cannot post write-ups
    Message no. AA400
    Diagnosis
    According to the transaction type, you have to post to area 01. However, in this area, there is either no accumulated depreciation or the write-up depreciation type(s) are not managed in this area.
    Procedure
    Check the transaction type.
    who can i post the write up for the assets with out this error??? is this error should be interpreted as, due to no accumulated depreciation or write up depreciation is not in the particular asset for current year or previous year???
    kindly help me in this regards.  Thanks in advance.
    With regards
    Satish Karantth k.

    Hi,
    Write-ups are used for correction of depreciation values calculated in
    the past (closed fiscal years). It is not possible to post write-ups to
    assets that have been acquired within the current year. If you attempt
    this, you will receive error AA402. Please review the R/3 Library
    documentation for further information. The documentation describes the
    procedure for write-ups as well as the two situations where write-ups
    can be used.
    A write-up is generally understood to be a later change to the valuation
    of an asset. This change can take different forms, depending on the
    reasons for the change. A write up can only be posted, if there are
    accumulated values on an asset, it means the posting of a write up
    corrects the depreciation from the past.
    For example - The value adjustments (depreciation) that you calculated
    in the past were too high. You must now correct this error using a
    write-up in the current fiscal year. You can only post a write up, if an
    asset has accumulated values.
    But again the write-up functionality is designed to change prior year
    asset not current year acquired ones.
    If manual changes are necessary it may be possible for you to use
    transactions ABMA - Manual depreciation or ABAA - Unplanned depreciation
    to correct the depreciation amount.
    Open the new fisical year and do the write-up from the previous fisical year
    Regrds
    Venkataswamy

  • Amortisation adjustsment for Investment Support measures

    I wonder if you can help?
    We have been doing some asset reclassification and changing useful lives etc - we have no problem in adjusting the depreciation up and down using ABAA (unplanned depreciation) and ABZU (write-up i.e. reduce depreciation).
    However, we are struggling with amortisation on investment support measures!
    We can increase the amortision using ABAA no problem.
    BUT we seem unable to reduce it - we have tried lots of combinations under FB05 and although we can adjust the gross value (and therefore the net book value is OK) we need to adjust the cumulated amortisation.
    Has anyone got any ides?
    Thank you in advance.

    Hi,
    In your case you have to create a TTy like in note 67448 descibed  (Lxx (xx for the investment measure) like note 529678 'name convention')  and post the amount with ABIF.          
    Regards Bernhard

  • Documentation on Investment Support Measures

    Hi All,
    Thanks In Advance
    Please I am in urgent need of Documentation on Investment Support Measures b'coz I have to configure the same in my US Project
    Regards,
    KAMAL KP

    Hello Raghu
    Please read the overview from this SAP link and explore and the other topics.
    http://help.sap.com/saphelp_47x200/helpdata/en/2a/f9f273493111d182b70000e829fbfe/frameset.htm
    Reg
    assign points if useful

  • How to post a reduction of Investment support posted by ABIF?

    Hi All,
    in 2010 for an asset Iu2019ve posted an Investment support, by t.code ABIF.
    In 2011 a part of that Investment support has been revoked.
    Could anyone tell me how to post this? Which t.code? Which transaction type?
    Thanks

    Hi,
    To reverse investment measures is described in notes 67448 and 529678.  
    you have to create a transaction type and post the amount with ABIF (note 67448)                                            
    Please follow not 529678 in creating the new transaction type.
    Do not hesitate if you have further questions.
    regards Bernhard

  • CS4 install problem "you cannot run...architecture not supported" error

    Just received my copy of CS4 (Mac) from amazon.com. Installed it. But could not get it to run. Got a "You cannot run....architecture not supported" error message. Can't understand why? This is my first version of Photoshop CS. Didn't install CS3...etc. Nor did I previously install the "master" edition. And I am running a MBP 2.5GHz laptop. So it has to be software related. A corrupt file perhaps?
    I also cannot install Adobe AIR. Suddenly 3 windows pop up. Telling me I can't install AIR.
    Not happy. Expensive software not running. Not good. :P What gives???
    Please help me soon!

    Where were you yesterday Buko?? :) Where would one find the "CS4 Cleanscript" any how? Would have been nice if you provided a link. Heh...
    Any how. Last night. I did d/l the trial version of CS4 Extended. Installed it. Then read the READ.ME file. Stresses that you MUST use their uninstall program. That you can't simply drag the folder to the TRASH (or use AppDelete or AppZapper...as you would be doing the same thing pretty much). So, I used Adobe's CS4 uninstaller. Did a very thorough job of removing the right files.
    I managed to sucessfully install my copy of CS4. I even got the proper SETUP dialogue box this time (6 tabs). Previously only 3 tabs were visible. This one asks you to input your serial # and even register before you finish.
    Now I see the blue PS folder icon. Have copied a few PS program icons to my dock. Working now as it should.
    Moral of the story? Read the READ.ME file!! And use proprietary uninstall programs for huge complicated programs like PS CS4. :) Later guys.

  • Investment support measure

    Hello!
    I defined measures for the investment support with the transaction ANVEST, and i put a maximum percentage rate for the investment support.
    When using the transaction ABIF to post an amount for the investment support, the system does not check the amount posted against this percentage.
    Can someone help me?
    Many thanks!
    Kind regards,
    Chiachen

    Is your problem solved? If not, have you defined a base area within your invst support measure? Which area you are posting this against.. area 41 or 51? SAP usually will not allow you to post investment support of more than 100% of the base area... if you post more than 100% of support means that your asset value is negative.
    Let me know if this helps.

Maybe you are looking for