"You cant run adobe flash cs4 because it is not supported on this architecture" HELP!
I just installed adobe cs4 design premium, and everything works fine except for the program I wanted most, which is Flash. It has a little circle with a line through the icon and whenever I try to run it, it tells me that it cant run because it is not supported on this architecture. I have already re-installed it four times and it never helps. I cant find any help on this board even though similar questions have been asked. Its on a brand new imac, can someone please help?
I'm afraid I don't have experience with troubleshooting this install issue to offer any sort of concrete answer about what's the quickest/easiest way to resolve it. Maybe someone else on this forum or a google search will provide some advice from people who have experienced this first-hand and will know the quickest steps to get the software running. If not, perhaps investigate partitions without journaling, or disabling it (the Apple site has info about this if needed).
Similar Messages
-
"You can't open the application 'Adobe Flash CS4' because it is not supported on this architecture"
Hi:
I purchased Adobe Design Premium Suite 4, and all of the other applications function properly except for Flash. I ran Disk Warrior and fixed all permissions, and rebuilt my directory. This is a new install.
I have also tried re-installing Flash twice, but have had no success!
Does anyone have any advice on how to fix this Flash error?
Thanks,
RobI would first quit Illustrator and then;
I would go to Users/username/Library/preferences/Adobe Illustrator CS4 Settings folder and trash that settings folder.
I believe if that does not work it is a permissions problem so repair your permissions and see if that helps.
if not log in as a new user see if you get the same error. -
A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again. -
I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
I am trying to install Photoshop CS4 onto my MAC Pro OS X Version 10.5.7 - Processor 2.66 GHz Quad-Core Intel Xeon....Memory: 3 GB 1066 MHz DDR3. WHAT GIVES?
I would first quit Illustrator and then;
I would go to Users/username/Library/preferences/Adobe Illustrator CS4 Settings folder and trash that settings folder.
I believe if that does not work it is a permissions problem so repair your permissions and see if that helps.
if not log in as a new user see if you get the same error. -
CS4 "You cannot open the application Adobe InDesign CS4 because it is not supported on this archit
Just installed CS4. Ai and Ps open fine. i get this prompt with InDesign.
You cannot open the application Adobe InDesign CS4 because it is not supported on this architecture.
any clues on how resolve this?
thanks!I'm having exactly the same problem with InDesign from CS4 Design Standard (Photoshop and Illustrator both work), and I don't know what to do. I've called up the Adobe support line five times, and received five different answers, none of which have worked (and on three other occasions, my call was dropped, once after an hour on hold).
One of the Adobe tech support people said to me "None of CS4 works with either 10.5.8 or Snow Leopard. We will issue a patch for that soon" - which directly contradicts what Adobe itself says on this site. I also went to see a Mac Genius, who couldn't help either.
I have a 2GHz Macbook with 2GB RAM running 10.5.8. I've run the uninstall, and the Adobe Clean Script, I've repaired permissions on my drive (which isn't case sensitive), restarted, reinstalled, tried installing on an external drive and then tried downloading the trial, in case it's the install CD - nothing works.
Any suggestions, anyone? Might there be a problem with my library that is stopping the install? Something else?? I bought CS4 for InDesign primarily, this is not good. -
I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.
-
I have PowerBook G4, running 10.5.8. Went to upgrade and says OS too old. I went back to older version of foxfire. Now I have a circle with a line through it and when I try to open it I get,You cannot open the application “Firefox” because it is not supported on this architecture. Thanks for the help.
Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/<br />
http://tenfourfox.blogspot.com/ <br />
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported -
I've read your recommended work around, that said to trash all previous versions of Firefox, I've done so and now have no browser other than Safari.
Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; '''''yours is a PPC Mac''''') '''''<u>and</u>''''' OSX 10.5 or higher.
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8] [https://www.mozilla.org/en-US/firefox/9.0/system-requirements/index.html Firefox 9]
'''''The good news''''' is that Firefox 3.6.x still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.x: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs with OSX 10.4.11 and OSX 10.5.8. Firefox 9 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/ReleaseNotes90
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
The above is my question
Sorry, Firefox 4+ versions don't support PPC architecture.
For older Macs that aren't supported in Firefox 4 / 5 / 6, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/ <br />
http://code.google.com/p/tenfourfox/downloads/list
Or use Firefox 3.6.20: <br />
http://www.mozilla.com/en-US/firefox/all-older.html -
downloaded your latest upgrade.
Running on mac os 10.5.8
Power PC G5 dual 2 GHz
8 GB DDR SDRAMI suggest yo change you system requirements: This is what is advertised
Operating Systems
* Mac OS X 10.4 and later
Minimum Hardware
* Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor
* 128 MB RAM (Recommended: 256 MB RAM or greater)
* 200 MB hard drive space
Im running
Model Name: Power Mac G5
Model Identifier: PowerMac7,2
Processor Name: PowerPC 970 (2.2)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 8 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.0.7f0
Serial Number (system): CK347009QEB
Hardware UUID:
SystemVersion 10.5.7 (121)
This is way above your so called system requirements
This has not solved the problem, but now forces me to use Safari -
iMac G5 with PowerPC G5 (3.0). Is this able to support 4.0? Can I go back and run 3.6?
Please consult the Firefox 4 [http://www.mozilla.com/en-US/firefox/system-requirements.html system requirements].
If you cannot use Firefox 4 on your computer, you can download Firefox 3.6 from [http://www.mozilla.com/firefox/all-older.html here] . -
You cannot open the application "Xcode" because it is not supported on this architecture.
I'm currently trying to understand why XCode 4.3.3 gives me this message when download has completed. I have a MacBook Pro 10.5.8 OS X. Any help would be appreciated WWnewbee
As noted, your OS is not compatible, sorry - see Xcode Versions ~ iOS - As of 9.19.12.
-
Cant open application because it is not supported on this architecture??
the graphics processor on my computer broke so i had to pull files off using the firewire system to connect two computers and when i went to open the address book this appeared "cant open application address book because it is not supported on this architecture". is there any way around this?? thank you.
You copied the Address Book application (which is not where your addresses are stored) from an older system to a newer one, or vice versa. So now it won't run. You'll need to reinstall the system on that machine, or restore Address Book and any other apps you replaced from a backup.
-
Firefox can't open the application "because it is not supported on this architecture
"You cannot open the application "Firefox" because it is not supported on this architecture."
Thanks for the link to the system requirements, edmeister. However, my system appears to fit every requirements listed, but still gives the same error message.
Here is what my system profiler tells me about my Imac:
Mac OS X v. 10.5.8
Processor: 2 GHz Intel Core 2 Duo, which Wikipedia tells me is "x86" processor
3 GB 667 MHz DDR2 SDRAM
My Activity Monitor says:
1.87 GB of my system memory free
303 GB of hard disk space free
Is there some explanation why I am being told Firefox 4 is not being supported on this architecture?
Maybe you are looking for
-
We have created some user ids's and before rolling them out , we would like to check if there any authorization errors that might crop up. What is the best way to approach this?Running each report under BEx for each user is taking too much time All t
-
For some unknow reason, iTunes would not open. Many attempts to "fix" failed and the last resolution was to create a new user ID for my desktop computer. iTunes and assoctiated programs were deleted in the proper order I turned off my firewall prote
-
Dynamic typecasting in java...is it possible?
Hi All i have a requirement in which i do not know the exact subclass to what i have to typecast to during compile time. I am calling it xyzclass, which i do not know till run-time. xyz can be A or B or C class. xyzclass xyzobj = (xyzclass) superclas
-
Create a New Login for Developer Support in Azure Portal
I'm a developer supporting a client using Azure. Can they create an account for me to manage endpoints etc. in Azure? Or do I have to ask them for their admin login credentials. Thanks
-
Are there Mail changes in Mavericks? Are the new iCloud keychain features like LastPass?
It's a pleasant surprise that Mavericks - OS X 10.9 was released as a free upgrade. There are some nice new features, like Finder tabs. I don't see any mention of Mail enhancements though. Are there any? I see tagging for files. Tagging for mail woul