You do ne have permision to upload ?

Hi ,
JDEV ver : 11g PS3
I am trying to upload/create a file thru Document Manager task flow in my application,
On click og upload, i am getting popup with You do not have permision
I did like this for security configuration
I have created a user in UCM name "Gopinath", the same name i have created in jazz-n config file
and gave access to AppConnectionViewer in the page hierarchy.
any solution please ?

When you click on Administration it should take you to a page showing your licenising. It looks like you don't have any meeting licensing, but you should look for a block that looks similar to this:
Meeting
Concurrent Attendee Pricing Model
Meeting Hosts:   7 / Unlimited
Meeting Peak Concurrent Users:   XX  (Soft Limit: XX)
Concurrent Users Per Meeting:   Unlimited   (Soft Limit: Unlimited)
Burst Pack Minutes (Total Used/Total Purchased):   0 / 0
(Balance:0 - Disabled)
Or this:
Meeting
Named Host Pricing Model
Meeting Hosts:   7 / XX
Meeting Peak Concurrent Users:   Unlimited (Soft Limit: Unlimited)
Concurrent Users Per Meeting:   100 (Soft Limit: 100)
Burst Pack Minutes (Total Used/Total Purchased):   0 / 0
(Balance:0 - Disabled)
If all you see is:
Meeting
Then you don't have any meeting licensing, which would explain the lack of report access you see above.

Similar Messages

  • Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

    Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
    -or-
    The icon in the dock bounces once, and nothing happens.

    Windows or Mac, and exactly which operating system version?

  • Trying to upload some photos to an e-mail an I get a message that says "The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it."  To where do I navigate to unlock this so I can have access to my photo library?

    Trying to upload some photos to an e-mail an I get a message that says "The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it."  To where do I navigate to unlock this so I can have access to my photo library?

    Couple of things to try:
    Restart your mac and try launch iPhoto again.
    If that fails:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a file called ‘iPhoto’Lock.data or similar. Drag it to the Desktop. Make no other changes. Start iPhoto. Does that help?
    If not: Where is your iPhoto Library stored? If it's on an External Disk, what format is that?

  • Keynotes upload of .pptx file using Windows 7.. .File:X you do not have permission to see its content

    I have keynote on an iPad. I have only one Apple Account. After connecting my iPad to my PC and launch of iTunes, I go into Apps > Keynote and hit he Add button, select my MS Presentation file and get the following: File:X you do not have permission to see its content. I currenty have other .pptx and .pdf files in Keynote and not sure why I'm unable to upload anymore. My avail iPad HDD space is 16 GB. File size is 345 MB so I created a test.pptx file which is 10k in size and tried to upload that as well and got the same error. Seeking a fix or workaround as I was not able to find anything out on the web.

    I have keynote on an iPad. I have only one Apple Account. After connecting my iPad to my PC and launch of iTunes, I go into Apps > Keynote and hit he Add button, select my MS Presentation file and get the following: File:X you do not have permission to see its content. I currenty have other .pptx and .pdf files in Keynote and not sure why I'm unable to upload anymore. My avail iPad HDD space is 16 GB. File size is 345 MB so I created a test.pptx file which is 10k in size and tried to upload that as well and got the same error. Seeking a fix or workaround as I was not able to find anything out on the web.

  • "you do not have permission to do this operation + SP Designer 2010 Error

    I am unable to access to my sharepoint site via SharePoint designer. The error is: You do not have permission to do this operation. Ask your web site administrator to change your permissions and then try again, or log on with a user account that has this
    permission...
     I am the site owner with full control. I get the error when I click Site Actions - Edit in SharePoint Designer. I also get the error when I open SharePoint Designer directly and click on the link that was created under Recent Sites.
    In my Central Admin, the SharePoint Designer Settings is all enabled. i am to beloning to farm administrator and i am teh site collection admin. and  in the machine admin group.
    First I created a  claims based authen.  with custom mem.ship /role providers and it was working fine. and i added  users into the users policy user1,user2, user3 etc. and later i  removed these mem.ship /role providers and removed the
    "Enable fba authentication " check box.
    now i am  unable to login into the  sp designer 2010 and  unable to edit master page.
    Also whenever i am trying tio change anything in the _layouts/settings.aspx, like uploading an image or adding a page etc i a egtting teh "error :access denied   sign in  as different user."
    i am not able to find out  what caused this issue till now. Did mycustom membership/role provider is causign the pblm?
    or Is there any place else that I should check?
    PrasadWT

    Seems like an extreme thing to do but these steps worked for me:
    Obviously backing up the site collection first using Central Admin's backup site collection feature
    Took notes of how the current web application was configured in central admin's Web Application Management |General Setting drp down for things like general & workflow settings, external email, etc
    (optional step)  I took a copy of some bespoke settings I had in the web.config file of the web application
    Deleted the web application from Central Admin (when deleting the web app I only deleted the IIS web site not the content db in a "just in case" operation but I don't think it matters, just remember to tidy up SQL and include any new content db in your
    SQL maintainance plan)
    Checked IIS that they had been removed
    Re-created the Web Application (and created a new content db in my case)
    Restored the site collection backup usign Restore-SPSite command with a -Force parameter
    Put all the web application settings back in
    Shut down IIS for a moment to add my custom web.config settings back into the new file
    Rebooted the server
    As I say a bit extreme but it worked...

  • You do not have permission to view this directory or page.

    I made an Azure website, installed GitHub, and made a repository. In the repository I put index.html, style.css, templogo.jpg, and homeimage.jpg . I needed the css and jpg files for the index page. I created a deployment account, and pushed the repository
    to my Azure Git Repository using Git Shell. Everything worked just fine, I can even see in the Azure Portal that the changes were pushed. Now, I'm trying to browse my site when I get this error:
    You do not have permission to view this directory or page.
    Not sure why this is happening, everything seemed like it worked out just fine. Can someone please help me?

    Hi sir,
    Firstly, I suggest you could set your default page on you Azure configuration panel.
    Secondly, I suggest you could try to use FTP to login on Azure website and check your files whether  were here. Please check it.
    http://blogs.msdn.com/b/avkashchauhan/archive/2012/06/19/windows-azure-website-uploading-downloading-files-over-ftp-and-collecting-diagnostics-logs.aspx
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • You don't have Add and Customize Pages permissions required to perform this action - but i do!

    Hello.
    I am having a similar problem to the one described by this post here:
    http://kiruthik.com/2010/10/05/YouDontHaveAddAndCustomizePagesPermissionsRequiredToPerformThisAction.aspx
    However, his resolution of changing web.config under wwwroot did not fix my issue.
    Here is the situation on a recently upgraded SP2010.
    1) Create a document library. Set the document template to "basic page"
    2) give a user full control on the document library.
    3) Go, under that users credentials, to the document library and create a new document.
    4) Name the document whatever and hit create
    5) a page is displayed which says the following: "Web Part Error:
    A Web Part or Web Form Control on this Page cannot be displayed or imported. You don't have Add and Customize Pages permissions required to perform this action."
    6) Become confused as giving someone "full control" on the library should obviously inherit the permissions to when they create a document and try and edit it.
    If i give the user "full control" on the entire site (site actions -> site permissions), then the document pops open an editor which would allow you to add content to the basic page. Obviously, i do not want to give users full control to the
    entire site :)
    Giving the user  "Add and Customize Pages" permissions on the entire SITE allows them to edit get the popup to edit the file, but this is not desireable either since then they could "Add, change, or delete HTML pages or Web Part pages,
    and edit the Web site using a Windows SharePoint Services-compatible editor.". I do not want them to edit any web pages, i just want them to edit a particular lists webpage!
    Things i have tried:
    - Set the permissions on the "MSContentEditor" webpart to have the user have full control of the web part.
    - set the permissions on ALL the web parts to have the user have full control (permissions on the web parts list)
    - Edited web.config to add a line to mark "contentEditorWebPart" as safe, and then restarted IIS.
    - Recreated test lists and was able to duplicate the behaviour
    So I am wondering, is this a sharepoint bug or what? Should a web part not inherit the permissions of the list it is working in? if not, what are the exact items i need to set permissions on to get this webpart to display correctly?
    Setting global site permissions is not an option.
    Another workaround is to make a "wiki page library" which allows you to copy and paste text into a static page, and also edit that text. I can move all the content over to a "wiki page library", and thats what i probably will end up doing
    in the end, but its annoying because there is alot of content to move, and it all has to be done by hand as you cannot upload documents to a wiki afaik. Also the wiki uses a different editor, its inline instead of a popup in IE which is probably why it is
    working.
    This may not be a bug and could be a simple permissions problem or something else, but i have been looking at this for hours and it doesnt make any sense to me.
    Any help appreciated thanks!

    Hi,
    Yes, you must have “Add and Customize Pages” permission
    from site level to perform this action, the permission is not in list permission level.
    You can add a new permission level which only includes “Add and Customize Pages” permission, and then create new SharePoint group with this permission
    level.
    Add the users into the SharePoint group and these users will get the “Add and Customize Pages” permission
    from site level.(site permissions)
    Additionally to add/edit page, the users also need the permission level “Contributor” in list permission level.
    (you should know when you grant the full control to the users in list permission level, the users won’t get the permission from site level)
    If you need further help, please let me know.
    Hope this helps
    Thanks!
    Stanfford
    Everything will be fine.

  • I tried to access my website, but Firefox threw the error: 403 Forbidden, you don't have the permissions to view.

    My website - Mousenstein.com - is under construction w/Dreamweaver + Flash.
    I uploaded my files to my server.
    I opened Firefox and entered the URL:
    http://www.mousenstein.com
    The error "403 Forbidden" appeared, and ...
    You do not have the permissions to access.
    I have tried to upload my site countless times, but never successfully - it is a huge headache. That said, I have never gotten the "403 Forbidden - no permissions" before.
    All other failures threw the error "404, can not locate the URL "/" on this server.
    Any help will be enormously appreciated.
    P.S. : Are there permissions preferences on Firefox? I found one under Tools Menu, but it didn't seem to address my problem.
    Thanks

    I get the same thing with Firefox, IE8, Opera, and Safari. It isn't a Firefox only problem.
    Are you new to that webhosting service? <br /> Have you ever uploaded web pages to that same web hosting service previously, pages that worked after an upload? <br /> Are those pages listed as ''' "public" ''' pages in your web hosts control panel?
    My suggestion is to "download" your homepage and associated files & images from your PC, up to the server, using your web hosts control panel and see how that works.
    Beyond that, I suspect that you might have missed an important setting in Dreanweaver for uploading to the web host's server. You might try asking about this issue at a Dreamweaver support forum.

  • Is there a way to remove your sim card if you don't have the tool that came with your phone?

    Is there a way to remove your sim card if you don't have the tool that came with your phone? I wanted to see if I could upload my old information to the iCloud, by putting the new sim card into the old phone, since I didn't before I updated my new phone.

    Any metal clip will do. Insert the tip in the little hole next to the Sim Card and press FIRMLY. The SIM drawer will pop out.

  • My pages documents on my ipad wont sync to icloud. Some documents have had the upload icon on them for over a month. It was all working fine but now I cant figure out what is going on.

    MY pages documents on my ipad wont sync to icloud. Some of the documents have had the upload icon on them for over a month. It was all working fine a month or so ago but I cant figure out why it wont work now.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • Help, please! "The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it."

    A few weeks ago, I was using iPhoto fine when it suddenly quit working. I quit iPhoto and relaunched. It would no longer work.. was giving me the "used by another source" message. Well... lots of crap later (my husband did most of it, I'm not exactly sure what).. we have a new library where we are importing our files from the old library. I still cannot get it to open from my computer, though. As of today, I cannot open iphoto from the external hard drive (our main library). I also have a library on my macbook pro that I AM able to open, but I must click on that library from Finder (unless it is the last library that has been opened if that makes sense). I cannot use iPhoto with the option key held down in order to choose which library to run. I cannot option + command to attempt to run the repair library stuff either. It gives the same locked message.
    I have deleted and reinstalled iPhoto.
    I am running Mavericks and have iPhoto version 9.5.1
    We have been using our external hard drive for at least 3 years now. It's defnitely formatted correctly.
    I can't get my image to upload, but here is what the "get info" shows.
    http://i.imgur.com/YF8vysc.png
    Any help is much appreciated, thank you.

    I also have a library on my macbook pro that I AM able to open, but I must click on that library from Finder (unless it is the last library that has been opened if that makes sense).
    Have you checked, if you have two versions if iPhoto on your Mac? This looks like the default iPhoto version on your mac were an older iPhoto version. Search with Spotlight, if you have more than one iPhoto version.
    Has iPhoto ever worked with MacOS X 10.9.1 correctly? Or did this start right after the upgrade to Mavericks?
    Your library is on a network volume. Have you tried, if it will work, if you connect the drive directly to your mac?  It may be a network problem.
    <Image Edited by Host>

  • TS3694 when i try to download ios 7 fron itunes it keeps on saying dont have permision (my iphone 4 is authorised on my laptop i use admin account i have latest itunes )

    i cant download ios 7 it keep saying i dont have permision but it wont tel what permision my iphone 4 is authroised on my system i use latest version of itunes
    every time it download 280 mb then gives this eror
    plz help

    I venture to say you have a Windows PC.
    If so, before beginning the download try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the insecure OS your computer is running.

  • Specify image size on images that have not been uploaded to APEX

    Hello,
    I’m an APEX newbie and have written an Employee Directory application in Apex 4.0.2 which allows the user to click an icon on an interactive report to see a photo of the employee on a new screen. The images have not been uploaded to APEX. Picture sizes range from 250x375, 275x275, 455x455, with several other variations of width and height. Clicking the icon does work, in that the photo is displayed. The problem is that the photos are displayed in APEX based on their size, so that the employee whose picture is 455x455 takes up 25% of the screen, whereas the 275x275 picture takes up far less space on the screen. How can I specify that these images should all display as a specific size?
    The URL specified in the Column Link section is https://prod.edu:8099/wtlgifs/ocp/#EMPDIR_ID#.jpg, where #EMPDIR_ID# contains the 9-digit ID number associated with a given employee. For example, https://prod.edu:8099/wtlgifs/ocp/123456789.jpg is the URL for the picture of employee 123456789.
    Thanks in advance for your help.

    jthomps8 wrote:
    I’m an APEX newbie and have written an Employee Directory application in Apex 4.0.2 which allows the user to click an icon on an interactive report to see a photo of the employee on a new screen. The images have not been uploaded to APEX. Picture sizes range from 250x375, 275x275, 455x455, with several other variations of width and height. Clicking the icon does work, in that the photo is displayed. The problem is that the photos are displayed in APEX based on their size, so that the employee whose picture is 455x455 takes up 25% of the screen, whereas the 275x275 picture takes up far less space on the screen. How can I specify that these images should all display as a specific size?Not really clear what's going on in the app from this.
    "click an icon"&mdash;What kind of icon? A thumbnail of the photo? The default IR detail view icon?
    The URL specified in the Column Link section is https://prod.edu:8099/wtlgifs/ocp/#EMPDIR_ID#.jpg, where #EMPDIR_ID# contains the 9-digit ID number associated with a given employee. For example, https://prod.edu:8099/wtlgifs/ocp/123456789.jpg is the URL for the picture of employee 123456789.
    So does this link just switch the browser location to that of the photo (i.e. after clicking the link the address bar contains <tt>https://prod.edu:8099/wtlgifs/ocp/123456789.jpg</tt>)? If so the photo is not "displayed in APEX based on their size": the browser is simply displaying the photo natively at its actual size. There's nothing you can do to modify this.
    To get any control over the photo size you need a different approach, using the IR column link to show either the interactive report or another APEX page.
    If I'm misinterpreting this then you're advised to recreate this aspect of the app on apex.oracle.com to give a clearer picture of what's involved.

  • The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

    How do i solve the following error message that come with uploading to itunes Match: The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

    Bump.

  • I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

    I have problems with uploading images to my internet printing company when  the images have been manipulated through CS6 and  i have saved images as jpeg  the printer company tell me they are not j peg,
    but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

    Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
    There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
    Take your pick.

Maybe you are looking for

  • How to output PDF file through XI from PDF form generated in SAP

    Hi, All, I need to generate and send out PDF file to other system through XI. The PDF file source come from SAP PDF form which type is XSTRING. I see there is a similar thread posted here /message/527877#527877 [original link is broken] but it seems

  • Create Application specific Log under NetWeaver 7.1 SP3

    Hi I want to create application specific Log and read the following article https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f361cbea-0c01-0010-a3a0-8948bebb0a23 But I use the NetWeaver 7.1 SP3 and I cannot find the Log-config

  • Displaying product information in registration buy page?

    Our client wants to add a section in the checkout process for www.grounded.com that displays product information before the checkout process is complete. I already tried the tags used in the shopping cart page to try and display in the registration b

  • Entourage - switch identity - syncing with iphone

    We have a Mac pro, 2 identities in Entrourage and 2 iphones. When syncing with the Mac, the info tab only gives me an Entourage box to tick. Which means both phones will have the same calendar/ address book! Me and my husband have seperate calendars

  • Has my KT3 Ultra2 vcore reg gone bad??

    I cannot adjust vcore in bios.  If I set it to auto, MBM and bios shows the voltage at the correct 1.6V for my XP2100+ Tbred.  If I change it to any other selection MBM and bios always reports 1.85V!! At one time this worked properly.  With vcore at