You do not have Authorization to read object 'xyz' Authorization Object

Hi,
     I am getting the following warning message while executing the query "You do not have Authorization to read object 'xyz' Authorization Object".
     I created an Authorization object.Assigned it to the role and assigned the user to the role.
Thanks

Hi,
  I'm getting the same message, please if you find the origin of it, please let me know, If I find it, I'll let you know, ok?
   Thanks!!

Similar Messages

  • 10.9 Server, you do not have the necessary read.write permissions for Time Machine Service

    Setting up 10.9 Server's Time Machine service when I try to backup from a computer on my LAN I get "you do not have the necessary read,write and [sic] append privileges on the selected network backup disk."
    I am logging in as the admin user for the OS X Server install.
    Confused.

    You need to mount the sharepoint as its owner.

  • Console, You do not have permission to...

    When I open Console and Logs, system.log is greyed out and when I click on it the message appears, "you do not have permission to read this log file". I am the admin/root user and only have one user on the computer. Any ideas?
    Thanks

    When you cannot read the system.log, have you wrong permission. The owner of the system.log is root, and the group is admin. Root has read and write permissions, and admin only read permissions.
    As you are in the group admin, you can only read the system.log. Probably is the read bit wrong.
    Try to repair the permission.

  • You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONE

    Hi,
    Iam facing the problem As
    You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONENT.
    ERROR IN SUBSTEP
    ERROR IN SUBSTEP
    Error reading the data of InfoProvider ZDP_VIRT..
    I had created a Virtual Infoprovider. and taking the Dat source ZZ_TD_EBAN.
    done the Trasf and DTP. for data source to cube. which was bulit in BI7..
    i can see the flow AS Source system- datasource- virtual provider.
    for virtual provider at run time it picks the data  from source.
    But when i rum the query on this VP iam getting error     as
    You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONE
    even if i chek data at virtual provider level byclicking  display Data..
    after selecting the fields  once i execute . there aso iam facing the same error. as
    You do not have authorization to extract from DataSource ZZ_TD_EBAN COMPONENT.
    Once i get in tthe error.. i can see the below msg.. but even though not able to solve .. i need your assistence.
    You are not authorized to extract from DataSource ZZ_TD_EBAN in application component: MM .
    System Response
    The authorization check was performed with the following field values:
    DataSource: ZZ_TD_EBAN
    Application component: MM
    Subobject: DATA
    Activity: 03
    Procedure
    To be able to extract from the DataSource, you need authorization for authorization object S_RO_OSOA (authorizations SAPI-DataSource) with the field values specified above.
    Procedure for System Administration
    There is a role template S_RO_OSOA_TMPL (DataSource (OSOA) Display/Maintain/Extract) available that contains the authorizations to display, change and extract all DataSources.
    Pls help mewith your valuable answer.

    Hi ,
    As given in your error message that S_RO_OSOA authorization object is missing . You need to include this auth object in the ID from which you are extracting the data using the TCODE : PFCG . You can ask the basis person to do so for you .
    When you run any report on a virtual infoprovider , you need to give the authorization of the DTP & the transformations apart from your cube and datasource in PFCG so that it can display the output in the report . This setting is only necessary for virtual cubes.
    You can always check the missing authorizations in tcode : SU53 .
    Hope the above reply was helpful.
    Kind Regards,
    Ashutosh Singh

  • RSPLAN - You do not have authorization for InfoCube

    Hi Friends,
    I have SAP_ALL and SAP_NEW access .
    I can access RSPLAN and can Start Modeler.
    I could see the Info Provider Selection(webpage).
    When I click START I get list of INFOPROVIDERS List.
    But When I select any of them.....
    I get a message on the top like "You do not have authorization for InfoCube 0RSTT_C02".
    Every time I select different object respectively it is looking for different authorization.
    Any help is appreciated....
    Thx
    James

    Hi Lucimar and Bindu,
    We are on BI 7 System.
    There are no missing authorizations from SU53.
    We have also traced using ST01 Authorization Check. It doesn't really point show any missing authorizations.
    On using the new authorization concept(RSECADMIN), Im not familier with it.
    Also we have found a useful note 913852, But this code correction is already existing in the system. And I can't find this support pack(SAP_BW_VIRTUAL_COMP) on the Marketplace.
    At the end the bug is still out there....we have to kill it....
    Come on folks post your thoughts....

  • I downloaded Real/Player. When I tried to play clip got msg: You do not have authorization to update this copy of Real/Player, R/P is op. on locked disc. Have no idea what to do?

    I just downloaded Real/Player to my SnowLeopard Mac OS X version 10.6.8 dual core processor intel core 2.16 GH. 2.5 GB.  I downloaded and tried to play a clip from the web.  I received a message:  YOU DO NOT HAVE THE AUTHORIZATION TO UPDATE THIS COPY OF Real/Player.  Real/Player IS OPERATING ON LOCKED DISC.  I'm new at navigating on a Mac.  I would appreciate any help I could get for this or any beginner tutorials out there?

    BDAqua,
    Ihaven't replied because I've been ill.  Thanks for your ongoing support, this is very frustrating being almost computer illiterate.
    Here the link to the original Real Player download http://http://eu.real.com/?mode=rp_mac.  I uninstalled all Real Player Utilities and files on my hard drive and downloaded it again.  I cannot get a clean copy.  The clips I downloaded are still there and so is the problem, no audio, no video.  I opened up the console and it's like reading a different language, literally!  I know I'm taking a huge liberty but perhaps you can find something in the errors that will help (I thank you in advance this gives you any clues)
    2/27/13 1:50:41 PM
    CleanMyMacHelperTool[28323]
    CleanMyMacHelperTool started as volume cleaner with cleanTrashes 1 cleanMacOSJunk 1 cleanWinJunk 1
    2/27/13 1:50:41 PM
    CleanMyMacHelperTool[28323]
    Mounted devices (
        "/Volumes/RealPlayer"
    2/27/13 1:50:41 PM
    CleanMyMacHelperTool[28323]
    DiskUtilities (
        "com.google.Chrome",
        "com.apple.TextEdit",
        "com.apple.Preview",
        "com.microsoft.Excel",
        "com.apple.Stickies",
        "com.apple.Console",
        "com.apple.mail",
        "com.apple.AddressBook",
        "com.apple.QuickTimePlayerX",
        "com.adobe.GoLive",
        "com.apple.SystemProfiler",
        "com.apple.finder",
        "org.mozilla.firefox",
        "com.apple.iCal",
        "com.apple.Safari",
        "com.apple.iTunes",
        "com.adobe.Reader",
        "com.microsoft.Word"
    ) diskUtilityIsRunning 0
    2/27/13 1:50:41 PM
    CleanMyMacHelperTool[28323]
    Wont clean /Volumes/RealPlayer because disk image
    2/27/13 1:50:41 PM
    CleanMyMacHelperTool[28323]
    Wont clean mounted devices.
    2/27/13 1:50:41 PM
    CleanMyMacHelperTool[28323]
    CleanMyMacHelperTool exited...
    2/27/13 1:50:42 PM
    DiskImages UI Agent[28316]
    *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid
    2/27/13 1:50:42 PM
    [0x0-0xa38a38].com.apple.DiskImageMounter[28308]
    2013-02-27 13:50:42.220 DiskImages UI Agent[28316:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid
    2/27/13 2:24:54 PM
    Mail[5714]
    Unable to parse date ([Date])
    2/27/13 3:09:14 PM
    RealPlayer[28333]
    copyright UNIMPLEMENTED!
    2/27/13 3:09:14 PM
    RealPlayer[28333]
    *** Assertion failure in -[NSTextFieldCell _objectValue:forString:errorDescription:], /SourceCache/AppKit/AppKit-1038.36/AppKit.subproj/NSCell.m:1531
    2/27/13 3:09:14 PM
    RealPlayer[28333]
    HIToolbox: ignoring exception 'Invalid parameter not satisfying: aString != nil' that raised inside Carbon event dispatch
    0   CoreFoundation                      0x982c06ca __raiseError + 410
    1   libobjc.A.dylib                     0x97dc95a9 objc_exception_throw + 56
    2   CoreFoundation                      0x982c03f8 +[NSException raise:format:arguments:] + 136
    3   Foundation                          0x993916e7 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 116
    4   AppKit                              0x91d1c218 -[NSCell _objectValue:forString:errorDescription:] + 183
    5   AppKit                              0x91d1c159 -[NSCell _objectValue:forString:] + 56
    6   AppKit                              0x91d1c0ae -[NSCell setStringValue:] + 56
    7   AppKit                              0x91de2b64 -[NSControl setStringValue:] + 126
    8   RealPlayer                          0x00032341 0x0 + 205633
    9   AppKit                              0x91cf321c -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1646
    10  AppKit                              0x91cf11a4 loadNib + 257
    11  AppKit                              0x91cf059c +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 228
    12  AppKit                              0x91cf04ad +[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 158
    13  AppKit                              0x91cf03f8 +[NSBundle(NSNibLoading) loadNibNamed:owner:] + 383
    14  RealPlayer                          0x000325f2 0x0 + 206322
    15  RealPlayer                          0x0003261b 0x0 + 206363
    16  RealPlayer                          0x00031ac1 0x0 + 203457
    17  AppKit                              0x91ec2d5b -[NSTabView selectTabViewItem:] + 1274
    18  RealPlayer                          0x000314f9 0x0 + 201977
    19  AppKit                              0x91d88f23 -[NSWindowController _windowDidLoad] + 525
    20  AppKit                              0x91d16f44 -[NSWindowController window] + 123
    21  AppKit                              0x91f7bdbc -[NSWindowController showWindow:] + 36
    22  AppKit                              0x91d71a26 -[NSApplication sendAction:to:from:] + 112
    23  AppKit                              0x91d718d9 -[NSMenuItem _corePerformAction] + 435
    24  AppKit                              0x91d715ca -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 174
    25  AppKit                              0x91d714b6 -[NSMenu performActionForItemAtIndex:] + 65
    26  AppKit                              0x91d71469 -[NSMenu _internalPerformActionForItemAtIndex:] + 50
    27  AppKit                              0x91d713cf -[NSMenuItem _internalPerformActionThroughMenuIfPossible] + 97
    28  AppKit                              0x91d71313 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 336
    29  AppKit                              0x91d65a55 NSSLMMenuEventHandler + 404
    30  HIToolbox                           0x968edc2f _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1567
    31  HIToolbox                           0x968ecef6 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 411
    32  HIToolbox                           0x9690f7f3 SendEventToEventTarget + 52
    33  HIToolbox                           0x9693be87 _ZL18SendHICommandEventmPK9HICommandmmhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 448
    34  HIToolbox                           0x96960b90 SendMenuCommandWithContextAndModifiers + 66
    35  HIToolbox                           0x96960b47 SendMenuItemSelectedEvent + 121
    36  HIToolbox                           0x96960a5d _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 152
    37  HIToolbox                           0x96930160 _ZL14MenuSelectCoreP8MenuData5PointdmPP13OpaqueMenuRefPt + 454
    38  HIToolbox                           0x9692f8bb _HandleMenuSelection2 + 465
    39  HIToolbox                           0x9692f6d9 _HandleMenuSelection + 53
    40  AppKit                              0x91d5ef96 _NSHandleCarbonMenuEvent + 285
    41  AppKit                              0x91d33b46 _DPSNextEvent + 2304
    42  AppKit                              0x91d32dd6 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
    43  AppKit                              0x91cf51f3 -[NSApplication run] + 821
    44  AppKit                              0x91ced289 NSApplicationMain + 574
    45  RealPlayer                          0x0000368f 0x0 + 13967
    46  RealPlayer                          0x000035bd 0x0 + 13757
    47  ???                                 0x00000002 0x0 + 2
    2/21/13 7:28:07 AM
    CleanMyMacHelperTool[21217]
    Wont clean /Volumes/DivX for Mac because disk image
    The above is repeated several timees.
    If I could figure out thes tring of messages or errors  in computer language specifically related to Real Player, I could narrow the errors down from the search box.  Because there were many other messages in the console.

  • Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

    I am trying to assign delegation to a user and I receive the following message.
    The delegates settings were not saved correctly.  Cannot activate Send-on-behalf-of list.  You do not have sufficient permission to perform this operation on this object.
    We are using 2010 for the server and client.  There are only specific mailboxes that this is happening for after being migrated from Lotus Notes.  The user can use their mailfile fine however it is just the delegation that appears corrupted somehow. 
    I'm not sure how to fix this.  I have checked the access through the security tab in ad and that looks fine.
    Any help would be appreciated.

    I did some more digging and I solved it.
    This would be the solution:
    In Active Directory Users and Computers
    -Click on VIEW
    -Click on ADVANCE FEATURES  (this is important otherwise you won't see
    the complete list in the next steps)
    -Click on the USERS container
    -Find the problem user's account
    -Right mouse the account and click on PROPERTIES
    -Click on the SECURITY tab
    -In the top box, click on the SELF account
    -In the bottom portion of the screen make sure the READ PERSONAL
    INFORMATION  & WRITE PERSONAL INFORMATION  should both be checked for
    ALLOW
    If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
    not work, more than those 2 permissions were missing.
    Good luck!
    David

  • Planning Sequence error - You do not have sufficient authorization

    Hello Experts,
    I am encountering the following error during execution of my planning sequence:
    You do not have sufficient authorization
    Message no. EYE007
    Diagnosis
    You do not have sufficient authorization for the requested data records.
    Procedure
    Either select other data or get the required authorizations from your administrator.
    Can anyone please suggest me what could be the possible cause of this error and how can I overcome it?
    Thanks in advance,
    Nitish.
    Edited by: Nitu_0105 on Jan 12, 2012 11:54 AM

    Check the planning level on which planning sequence is based  for values restriction.Looks like values for which it is been restricted you are not authorized or Roles assigned to you are not restricted with values in planning level.
    Also check if level is been restricted with any variable on which authorization is been restricted.Some are user specific example specific business area are assigned to only some users ...so you need to add your user ID to those variable.

  • You do not have the sufficient authorization

    Hi Experts,
    I am trying to setup Structural Authorization from HCm in BW. I am using 0HR_PA_2 and 0HR_PA_3 extractors to pull the data from HCM in 0TCA_DS01 and 0TCA_DS02. I am able to load the data for both DSO's and Authorizations are generated also via RSECADMIN. 
    The auth relevant info objects are
    0ORGUNIT
    0HRPOSITION
    0EMPLOYEE
    But when i run the query for test user it is giving the error "You do not have the sufficient authorization". Our security guy setup everything for the test user at the back end. Can anyone help me out to fix this problem?

    Hi Shehzad
    Kindly check the below details and confirm.
    1. Check auth objects S_RS_COMP, S_RS_COMP1, S_RS_AUTH and S_RS_DSO as you mentioned data is coming from DSO.
    2. Now check the value maintained in S_RS_AUTH and copy that value and go to RSECADMIN and in maintenance screen put that value click on display and check whether these relevant auth is maintained (this you can also check in rsecval table).
    3. If every thing is fine then go to tcode - rsecadmin-> Analysis-> Check "Authorization Log" ID and put test user Id there and click on run RSRT this will take you to RSRT scrren and there you can Simple RUN or run with debug also.
    Now If error came of No authorization go back and check log in that you will get to know the auth obj which is missing in analysis object.
    Suggestion: Simultaneously run ST01, so that you will also get auth obj if any is missing as there may be possibilty of multi-cube so for that there is requirement of some other object.
    Hope this will help.. Else please share trace results and role objects which is maintained.
    One more IMP point if new query or report is created. it will take some time to synch for other users even 0BI_ALL will not work for that user, need to pass that particular values in analysis object which is required.
    Thanks
    Bhupinder Singh Arora

  • VSphere 6 - You do not have permissions to view this object or this object does not exist

    I installed a new vCenter Server, when i log in, on some pages i have the message:" You do not have permissions to view this object or this object does not exist".
    Im Administrator on the vCenter ([email protected]) and i put another user in the admin group - same message
    When i login with the same user on the vsphere desktop client, i can do all the operations.
    Can anybody help?
    Thanks

    I'd recommend 2008 R2 myself if 2012 or 2012 R2 doesn't work.
    A lot of 3rd party software is still buggy post-2008 R2. Take Spiceworks for instance, I installed it to 2012 R2 and ran discovery, it picked up about 1/3 of the environment. I installed to 2008 R2, same machine, same network, it discovered 100% of the environment.
    Few other things I have seen that has had similar issues too. Hence, don't trust 2012 and 2012 R2 with 3rd party software... yet.

  • Fail to open the group policy object. you might not have thw appropriate right

    fail to open the group policy object. you might not have thw appropriate right

    Hi,
    Would you please let me know which account you use to open GPO? Was it a Domain Administrator? Please refer to following KB and check if can help you to troubleshoot this issue.
    "Failed to Open the Group Policy Object" Error Message Occurs When You Try to Open a Policy As a Domain Administrator
    Meanwhile, please open Event Viewer and check if find some relevant events.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Why "You do not have authorization to display company codes" ? Thanks

    Hello,
    Using the Tutorial BAPI which comes with the JCO Tutorial,I just wanna call the first function.
    When I run the code, it display "You do not have authorization to display company codes".
    Could any body please help me to explain why?
    Thanks a lot
    BELOW IS THE CODE:
    package com.sap.slc.teamweb.test;
    import com.sap.mw.jco.*;
    public class TestBapi1 extends Object {
        JCO.Client mConnection;
        JCO.Repository mRepository;
        public TestBapi1() {
            try {
                // Change the logon information to your own system/user
                JCO.createClient("001", // SAP client
                  "<userid>", // userid
                  "****", // password
                  null, // language
                  "<hostname>", // application server host name
                  "00"); // system number
                mConnection.connect();
                mRepository = new JCO.Repository("SAPJCO", mConnection);
            } catch (Exception ex) {
                ex.printStackTrace();
                System.exit(1);
            JCO.Function function = null;
            JCO.Table codes = null;
            try {
                function = this.createFunction("BAPI_COMPANYCODE_GETLIST");
                if (function == null) {
                    System.out.println("BAPI_COMPANYCODE_GETLIST" + " not found in SAP.");
                    System.exit(1);
                mConnection.execute(function);
                JCO.Structure returnStructure = function.getExportParameterList().getStructure("RETURN");
                if (!(returnStructure.getString("TYPE").equals("") || returnStructure.getString("TYPE").equals("S"))) {
                    System.out.println(returnStructure.getString("MESSAGE"));
                    System.exit(1);
                codes = function.getTableParameterList().getTable("COMPANYCODE_LIST");
                for (int i = 0; i < codes.getNumRows(); i++) {
                    codes.setRow(i);
                    System.out.println(codes.getString("COMP_CODE") + '\t' + codes.getString("COMP_NAME"));
            catch (Exception ex) {
                ex.printStackTrace();
                System.exit(1);
            try {
                codes.firstRow();
                for (int i = 0; i < codes.getNumRows(); i++, codes.nextRow()) {
                    function = this.createFunction("BAPI_COMPANYCODE_GETDETAIL");
                    if (function == null) {
                        System.out.println("BAPI_COMPANYCODE_GETDETAIL" + " not found in SAP.");
                        System.exit(1);
                    function.getImportParameterList().
                    setValue(codes.getString("COMP_CODE"), "COMPANYCODEID");
                    function.getExportParameterList().
                    setActive(false, "COMPANYCODE_ADDRESS");
                    mConnection.execute(function);
                    JCO.Structure returnStructure = function.getExportParameterList().getStructure("RETURN");
                    if (!(returnStructure.getString("TYPE").equals("") ||
                    returnStructure.getString("TYPE").equals("S") ||
                    returnStructure.getString("TYPE").equals("W"))) {
                        System.out.println(returnStructure.getString("MESSAGE"));
                    JCO.Structure detail =
                    function.getExportParameterList().
                    getStructure("COMPANYCODE_DETAIL");
                    System.out.println(detail.getString("COMP_CODE") + '\t' +
                    detail.getString("COUNTRY") + '\t' +
                    detail.getString("CITY"));
            catch (Exception ex) {
                ex.printStackTrace();
                System.exit(1);
            mConnection.disconnect();
        public JCO.Function createFunction(String name) throws Exception {
            try {
                IFunctionTemplate ft = mRepository.getFunctionTemplate(name.toUpperCase());
                if (ft == null)
                    return null;
                return ft.getFunction();
            catch (Exception ex) {
                throw new Exception("Problem retrieving JCO.Function object.");
        public static void main(String args[]) {
            TestBapi1 app = new TestBapi1();

    Hi Mao,
    R/3 comes with some predefined Company Codes and we also
    can define our own Company Codes.
    visit this link this may help you.
    http://help.sap.com/saphelp_erp2004/helpdata/en/8e/1a5217171311d28e1d080009b6ab29/frameset.htm
    Regards,
    Narinder Hartala

  • Authorization Issues: Message EYE007: You do not have sufficient authoriza

    Hi all,
    We are facing issue regarding authorization. Details are -
    We have info object Region (which has values like NORTH, SOUTH, EAST, WEST and CENTRAL).
    Steps:
    1. I made Region as Authorization Relevant.
    2. Created Variable on Region and Processing type as Authorization (Multiple Single Values, Optional)
    3. As per user's role we have created 5 Authorization analysis objects with respective to Region values.
    If one user has access rights for north then, will assign North Role in BI. Similarly for others aslo it is working fine.
    But, If I assign North and South Role for one particular User then it is giving error.
    Error Message:
    All Authorizations Tested
      Message EYE007: You do not have sufficient authorization
      No Sufficient Authorization for This Subselection (SUBNR)
    Following CHANMIDs Are Affected:
    1478 ( ZDISTRICT )
    1488 ( ZREGION )
      Authorization Check Complete  
    Please help me.
    Regards,

    Hi,
    If ZDISTRICT & ZREGION  are not included in your selection you will get an authorization error. To avoid this error maintain value as : (Colon) in RSECADMIN for these objects.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b1/0c9441b8972e7be10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/932b839c8019ade10000000a11466f/content.htm
    hope it helps...
    regards,
    Raju

  • Service Desk: Error in local message system: You do not have authorization

    Hello experts,
    i'm configuring support desk scenario. I think all is fine, but, when i try to create a message from satellite (R3 46C) to my SOLMAN the following error appears:
    Error in local message system: You do not have authorization to create a notifica Message was not created. (Message no. B~ 088)
    The user i use to create the message has the following roles:
    SAP_SV_FDB_SUPPORT_LINE_ADMIN
    SAP_SV_FDB_SUPPORT_LINE_LEVEL1
    SAP_SV_FDB_SUPPORT_LINE_LEVEL2
    Z_RFC
    and SAP_ALL SAP_NEW profiles.
    Anyone knows where is the problem?
    Regards
    Carlos Calle

    Hi Carlos,
    Role that allows processing messages is SAP_SUPPDESK_PROCESS. However from what I have understand, once End User enters and submits the message, he/she cannot edit the message anymore. Probably an email will be generated to him/her to notified of the message creation and for futher updates. I think end user should not be required to logon to Solution Manager. Key User i.e. helpdesk or SAP support staff will process(edit/change) the message instead.
    If you want something else, I think you need to create a customise role maybe from SAP_SUPPDESK_DISPLAY or PROCESS and change the authorization values.
    The below note contains latest authorization info.
    Note 834534 - SAP Solution Manager roles in Release 4.0
    Experts,
    Correct me if I am wrong.
    Regards,
    Annie

  • Error message Indesign:Either the file does not exist, you do not have read access to it, or use the file in another application.

    I've got problem with opening a file in InDesign. The file type is an InDesign Markup Document. The error message is: Either the file does not exist, you do not have read access to it, or use the file in another application. What's wrong?

Maybe you are looking for