You do not have security permissions to complete this operation. Contact your administrator for more information.

Hi everyone,
I had a little trouble finding this on ony forums, so i decided to write it myself.
I have setup on my Windows server 2008 machine fax server manager. It is working well (recieving faxes and forwarding it through email)
It has been setup with a d-link external fax modem.
Everytime i try to connect my client computer (windows vista business 32 bit) to the fax server through windows keep getting " you do not have security permissions to complete this operation. Contact your administrator for more information."
I am having a little trouble getting around it as i am the system administrator and have all the rights to do this. I have also added extra to my account fax rights as i thorght, that could of been the problem. I have also added my account in the fax server manager, but that did not work as well.
Everything is set up on a domain and the server that is running fax service manager is on it aswell, not sure what could be the problem.
Thank you in advanced for your help

Hi,
Thanks for the post.
First, I would like to confirm if the issue occurs with the Domain Admins.
If so, please check if the relevant group policies are set appropriate.
To resolve this issue, make sure that the Network Service account and the Local Service account is added to the following policy settings on the domain controller:
·         Adjust memory quotas for a process
·         Generate security audits
·         Log on as a service
·         Replace a process level token
·         Log on as a batch job
To configure the policy settings for the Network Service account on the domain controller, follow these steps:
1.    Click Start, point to Administrative Tools, and then click Local Security Policy.
2.    Expand Local Policies, and then click User Rights Assignment.
The policy settings are displayed in the right pane.
3.    Double-click the policy setting that you want to add the Network Service account to.
4.    If the Network Service account and the Local service account is not in the list of users and groups that are assigned to that policy setting, click Add User or Group.
5.    In the Select User or Groups dialog box, type Network Service in the Enter the object names to select box, and then click OK.
6.    Verify that NETWORK SERVICE is displayed in the list of users and groups that are assigned to that policy setting, and then click OK.
7.    Add Local service the same way.
8.    Reboot the server.
Does it work?
If the problem continues, Please collect the MPSReport from Windows Server 2008.
1. Download proper MPS Report tool from the website below.
Microsoft Product Support Reports
http://www.microsoft.com/downloads/details.aspx?FamilyID=CEBF3C7C-7CA5-408F-88B7-F9C79B7306C0&displaylang=en
2. Double-click to run it, if requirement is not met, please follow the wizard to download and install them. After that, click Next, when the "Select the diagnostics you want to run" page appears, select "General", “Business Networks”, click Next.
3. After collecting all log files, choose "Save the results", choose a folder to save <Computername>MPSReports.cab file.
Use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the file and then give me the download address.
Hope this helps.

Similar Messages

You do not have security rights to perform this operation exception occurred in CreateComputerVariable method

I am getting an exception near computerSettings.Put();Its throwing an exception as You do not have security rights to perform this operation..Can i know exactly when does this error occur..
Details of Error:
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
CauseInfo = "5";
Description = "CSspMachineExtProperties: ERROR_ACCESS_DENIED: ";
ErrorCode = 1112017925;
File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\sspmachineextprops.cpp";
Line = 958;
ObjectInfo = "";
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
stack trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at TestWqlManage.Program.CreateComputerVariable(WqlConnectionManager connection, String siteCode, List`1 variables, Int32 computerId) in /path/path/path
ComputerVariable Method where exception occurs
public static string CreateComputerVariable(WqlConnectionManager connection, string siteCode, List<ComputerVariableDC> variables, int computerId)
try
// Get the computer settings.
IResultObject computerSettings = null;
IResultObject computerSettingsQuery = connection.QueryProcessor.ExecuteQuery(
"Select * from SMS_MachineSettings where ResourceId = '" + computerId + "'");
foreach (IResultObject settings in computerSettingsQuery)
computerSettings = settings;
if (computerSettings == null) // It doesn't exist, so create it.
computerSettings = connection.CreateInstance(@"SMS_MachineSettings");
computerSettings["ResourceID"].IntegerValue = computerId;
computerSettings["SourceSite"].StringValue = siteCode;
computerSettings["LocaleID"].IntegerValue = 1033;
computerSettings.Put();
computerSettings.Get();
// Create the computer variable.
List<IResultObject> computerVariables = computerSettings.GetArrayItems("MachineVariables");
foreach (ComputerVariableDC variable in variables)
IResultObject computerVariable = connection.CreateEmbeddedObjectInstance("SMS_MachineVariable");
computerVariable["Name"].StringValue = variable.Name;
computerVariable["Value"].StringValue = variable.Value;
computerVariable["IsMasked"].BooleanValue = false;
computerVariables.Add(computerVariable);
computerSettings.SetArrayItems("MachineVariables", computerVariables);
computerSettings.Put();
return computerId.ToString();
catch (SmsException e)
Console.WriteLine("Failed to create computer variable: " + e.Message);
//throw;
//return e.Message;
throw e;

Hi,
What's the error when you create a computer variable manually?
Please make sure you have give "Modify Resource" permission to this user. You could see it in Administration workspace -> Security -> Security Roles -> Full Administrator -> Collections -> Modify Resource.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I get message saying system administrator has set policies to prevent this installation; when trying to uninstall message says you do not have sufficient access to uninstall itunes please contact your administrator. i am administrator.

when intalling itunes i get message saying system administrator has set policies to prevent this installation; when trying to uninstall message says you do not have sufficient access to uninstall itunes please contact your administrator. i am the dministrator.

Windows right?
Likely your not the administor any more, the botnet is.
Check on this site really quick if your part of a botnet
http://botnetchecker.com/
All clear? Hopefully. Backup your files to a external drive, cd or dvd, USB keye etc off your computer.
Run the sfx file on this site and it will burn to a cd.
http://www.avira.com/en/support-download-avira-antivir-rescue-system
Next hit your BIO's key and set the cd to boot first, run the scanner and see what it pops up.
If your all clear then create another Admin, transfer your files over from the first Admin.
See if that works, eventually when your totally over to the new Admin, delete the old one.
If you can't create a new Admin, find out who locked your machine down, like your parents or it's a school computer?
Likely installed spyware or "nanyware" to watch you.
Hope that works.

Dashboard Designer Error - You do not have sufficient permissions to complete the request.

Hi all
I have created a PerformancePoint Data Source library and a PerformancePoint Reports list on a SharePoint site. The PerformancePoint site collection and site features are also both activated. The data source library is in
the 'trusted data soruces' list in administration. Existing reports I have created show OK on the site.
When user, who has full control of the entire site, clicks "add a new item" in the BI Reports list, SharePoint launches Dashboard Designer OK.
The problem is when Dashboard Designer loads, it does not load the existing data sources & reports. Clicking on the refresh icon results in the error:
You do not have sufficient permissions to complete the request.
If I add this user to the Site Collection Administrators list, the user can refresh and view the data sources & reports OK. Is this a requirement to create reports in Dashboard Designer? It is not acceptable to set all
our report designer users as the site collection administrator.
Cheers
Tyson

Hi,
Have you also tried to assign rights using the technique mentioned in the above given document (i.e. using Dashboard Designer):
Important To assign or change user permissions for dashboard items, you must have
Full Control permissions. Although you can create and publish dashboard items with
Design permissions, you cannot assign or change permissions for dashboard items unless you also have
Full Control (Site) or Site Collection Administrator permissions.
Use the SharePoint Permissions dialog box to assign or change user permissions for a dashboard item. You can open the
SharePoint Permissions dialog box from Dashboard Designer or from the SharePoint list or document library that contains the dashboard item. The following sections describe both methods.
Edit user permissions in Dashboard Designer
In the Workspace Browser, click PerformancePoint Content or
Data Connections, depending on the item that you want to modify. Then, in the center pane, double-click the dashboard item to open it for editing.
In the ribbon, click the Home tab, locate the Item group, and then click
Permissions. A browser window opens, which enables you to view or change the SharePoint permissions for the dashboard item that you opened.
Use the SharePoint permissions dialog box to modify the user permissions for your dashboard item, and then save your changes.
Edit user permissions in a SharePoint list or document library
Locate the dashboard item that you want to modify in its SharePoint list or document library.
Select the check box that is next to the name of the dashboard item. At first glance, you might not see a check box next to your dashboard item. The check box is visible when you put your cursor next to the
Title column, which is located next to the name of the dashboard item. The ribbon appears in the SharePoint site.
In the SharePoint ribbon, click List Tools, and then click
Items. Locate the Manage section, and then click
Document Permissions. A SharePoint Permissions dialog box opens. This enables you to view and change the user permissions for the item that you selected.
Use the SharePoint Permissions dialog box to modify user permissions for your dashboard item, and then save your changes.
Please tell us if this approach shows different permissions assigned and solves your problem.
Thanks and best regards,
Martin
Martin W. Angler, MCTS
Blog angler.wordpress.com
Twitter: Follow me on twitter

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ERROR: You do not have sufficient privileges to complete this installation

When attempting to install iTunes 9.0.1, I receive this message just after the installation begins: You do not have sufficient privileges to complete this installation for all users on this machine. Log on as an administrator and then retry this installation."
I am the administrator of this machine. I have tried installing in a different directory of the all users folder, however that failed with the same reason. This PC has had some anomalies of late so this may not be iTunes, but I'm without clues as to where to go to fix this.
Thanks for any clever ideas you may have. I miss the music.
Gina

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

"changes to the distribution list membership cannot be saved. you do not have sufficient permission to perform this operation on this object"

Running Exchange 2010/latest updates on Windows 2008 R2 servers.
When I create a new DL that I want someone to manage, they received the following message when trying to add/remove from the DL:
"changes to the distribution list membership cannot be saved. you do not have sufficient permission to perform this operation on this object"
I have followed everything in "http://msexchangeteam.com/archive/2009/11/18/453251.aspx" with no luck
Any suggestions?

Piggybacking off of the discussion above, with our deployment of Exchange 2007, we created a set of web-based tools that allowed people to create Exchange Resources including distribution lists. To allow multiple people to manage the lists for a given
department, we programmatically created a group, which is populated with one or more users from the "resource department". We then set the following AD permissions to allow members of the group to manage membership of departmental distribution lists:
Add-ADPermission -User DepartmentalGroup -AccessRights ReadProperty, WriteProperty -Properties 'Member' -DomainController dc.contoso.com
Fast forward to Exchange 2010 and the landscape has changed with Exchange 2010's implementation of Role Based Access Control and I'm struggling to come up with a way to programmatically allow a group of users to manage distribution list membership for a
subset of distribution lists - note that we have approximately 75 departments, with each having its own set of coordinators who should be able to manage distribution lists for their department but not lists created by other departments. The specific
error we receive in Outlook when attempting to modify group membership is the same as the title of this thread - "Changes to the distribution list membership cannot be saved. You do not have sufficient permission to perform this operation on this object".
I implemented the settings referred to at
http://sysadmin-talk.org/2010/06/omg-allowing-end-users-to-manage-distribution-group-membership-in-exchange-2010-2/ which details the process of creating a new management role and revoking the role's ability to create new distribution lists and remove distribution
lists (which we want because we want those actions to be performed using our web tools).
All that to say that the ultimate problem we have is that the above relies on the "ManagedBy" field of a distribution list (viewable by Get-DistributionList Listname | fl *ManagedBy*) to determine group ownership. When "ManagedBy" is set to a user,
the user CAN edit a distribution list's membership from Outlook and OWA. When "ManagedBy" is set to a group, members of the group are UNABLE to edit the membership of the distribution list via Outlook or Outlook Web Access/ECP. Furthermore,
Set-DistributionGroup does not allow you to specify a list of users to assign to the ManagedBy field. However, if "ManagedBy" was set to a specific user and that user logs in to the Exchange Control Panel and adds additional "owners" of the distribution
list, which I can then see from EMS - both the original owner and any additional owners added can in turn modify group membership for the list using Outlook or Outlook Web Access/ECP.
My questions:
1) Is it "expected" behavior that while I can assign a group to the "ManagedBy" property of distribution list, members of that group are still unable to edit the group membership? ...or is there a fix for the behavior I'm seeing?
2) Can multiple values be assigned to the "ManagedBy" property when using Set-DistributionList - ex: Set-DistributionList DLName -ManagedBy:user1,user2
3) Any other suggestions?
Thanks,
-Lance

After a long time, i looged in to add some files in my iphone 4s but when i connect my iphone, it says that the iphone zizous friend cannot synced,you do not have enough permission to run this operation..using windows 7 and transfering videos

i am facing this issue for the first time.....cannot sync my iphone 4s ...iphone cannot sync.you do not have enough permission for this operation...
i am adding videos to my iphone....
using windows 7
ios latest update

there are lot of threads in respect to this issue but still unable to get the problem solved from the solutions available

Changes to the public group membership cannot be saved. You do not have sufficient permission to perform this operation on this object.

We have an existing Hybrid Setup
On-Premise Exchange Version: Exchange 2010 SP3 RU1
Users are being migrated to Exchange Online every day.
We've read online that Distribution Group and Public Folder permissions and memberships cannot be modified by Exchange Online users, until and unless all DG and PFs are moved to Exchange online.
I'd like to confirm the above part.
-Tushar Shah

Hello,
These migrated users who are owners of the distribution group can't manage it in Microsoft Exchange Online, if you want to manage the distribution group, the distribution group owners need to use on-premises tools for Exchange Server such as the following:
EMC and EMS, and then we need directory synchronization or other tools to sync the changes to Office 365.
Even though all DG and PFs are moved to Exchange online, I'm afraid that we still need on-premises tools for Exchange Server :EMC and EMS.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Error 1476: You do not have the rights to perform this operation

My problem just started this week. On certain users, or workstations I
try and remote control. RC tries to authenticate, but then the error
message in my subject line comes up.
I've checked my RC policies for users and the desktops, and haven't
changed anything. It will work for suer a, but not user b even though
they both have the same policies associated with them. (same for
workstations)
The only thing that has been done recently are the DST updates. I have
tried updating Console1 but that did nothing.
Any help would be greatly appreciated.

Gwsorrells,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Shared Calendar Ownership: You don't have appropriate permissions to perform this operation.

Hi,
I am trying to set up an automatic reply on our do-not-reply shared email account. Here is the general scope of the problem.
We have Office 365 combined packages of Enterprise ProPlus AND Business Essentials package together under each account.
I am full admin of the services
I have used the following PS command to assert my ownership of my do-not-reply shared email account
Add-MailboxPermission -Identity <User Mailbox> -Owner <Room Mailbox>
The resulting PS blurb was:
RunspaceId : 825143a5-e10d-44dd-ab27-304a01804d8b
Identity : my.name
Owner : EURPR01A002\do-n53327-1151623564
IsValid : True
ObjectState : Unchanged
I am trying to set up a server reply but get the following message:
What am I doing wrong?
Many thank in advance for your help.

Hi,
If this is not a permission issue, then this rule can be corrupted. You can use MFCMAPI tool to delete it.
https://technet.microsoft.com/en-us/library/bb508857(v=exchg.65).aspx
Thanks,
Simon Wu
TechNet Community Support

Error: You do not have sufficient privileges to perform this operation.

I dun know is it appropraite to bounce this question in this forum or
not,nevertheless i am asking cuz i dun know where to ask dis silly question.
I wana view this link it asks me OTN member user and password ,after
putting the username and password the aforesaid error is displaying ,from where
can i get such privileges for this link.
http://www.oracle.com/gateways/gateway_bundles/faq.htmlKhurram

This is certainly not the appropriate foruma as it is not monitored by Oracle staff
Try the Feedback forum
Community Feedback (No Product Questions)

After auto update recently, norton internet security won't work. error message:windows cannot access specified path...you may not have appropriate permissions to access item

Firefox did an auto update and since then I cannot open/run Norton Internet Security. It won't even let me update it or re-install it. I get an error message stating Windows cannot find the specified path. You may not have appropriate permissions to access this.

Hi
Some required information are needed for us to help you.
Hi NabeelOmer,
We wonder if you have taken any action such as system restore after this issue occurred.
You might also try this command to restore your access control list.
Run this command to navigate to the drive letter, example is D
D:
To reset all permissions, run this command
icacls * /reset /t /c /q
Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
How to: Repair Visual Studio
https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
Regards
D. Wu

Can't install - you do not have appropriate permissions

Running W7 64 bit, CS5. I have right clicked and 'run as administrator' on the AdobeExtensionManagerCS5.exe and still this message persists. I have tried both the 32bit and 64bit installs - neither work. I get the accept/decline terms and conditions page and then install fails with the usual "you do not have appropriate permissions" error. I am the system administrator - I have all permissions. Can someone pls advise how to install this plug-in.
Thanks
Anna

Running W7 64 bit, CS5. I have right clicked and 'run as administrator' on the AdobeExtensionManagerCS5.exe and still this message persists. I have tried both the 32bit and 64bit installs - neither work. I get the accept/decline terms and conditions page and then install fails with the usual "you do not have appropriate permissions" error. I am the system administrator - I have all permissions. Can someone pls advise how to install this plug-in.
Thanks
Anna

You do not have security permissions to complete this operation. Contact your administrator for more information.

Similar Messages

Maybe you are looking for