"You do not have the correct role to perform this function" on New Site

I have created a new site where I added fwadmin to all roles. When I login to Admin for this site I get the "You do not have the correct role to perform this function" error. I've read the manual and retired adding the user to all roles. I also looked at the Asset Types and I get "Error in evaluation;Error in configuration" when trying to enable.
Please point me to where I am going wrong, or where in the manual (and which manual) I can find help.
Regards,
John

Hi John -
When you're provisioning users for sites, you have to
1) enable the app for your site
2) specify the roles that pertain to your app
3) assign a user to the site
4) assign a user roles for the site
If you miss any one of these, you can get this error. When you see "Error in Evaluation; Error in Configuration", however, especially during the out-of-the-box apps, please report a bug to support. That message is basically the XML scripting language equivalent of an uncaught exception, and it should not happen in the UI.
Regards,
Tony

Similar Messages

Uninstalled, tried to reinstall firefox- get message Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to

Firefox would not load Yahoo home page properly, checked add ons and plugins-no problem. So unistalled. When reinstalling, went through until the end, then I get:
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access this item.
I went through the Help section on this page, even to right clicking the file and "run as administrator". It went through and restarted the computer. When I went to look for the program, it wasn't listed in All programs. I searched files and the only thing there was the same message as above.

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

'You Are Not Using The Correct Type of Phone Cord' Error

Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.

I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me!

I have a 2011 mini with usb connector when I attempt to connect my nano I get the message that I do not have the correct adapter cable. I got the correct adapter cable from the Mini dealer. Any suggestions?

I cannot get my Mini Cooper to sync up with my nano thru the USB port. When I hook up with the cable that came with the Nano, it acknowledges that it is an Ipod however it displays the message that I do not have the correct cable. When I use the audtio adapter cable from BMW it doesn't see the Nano at all. Has anyone else had the issue and what did you do to over come it I tried my nano in another persons car (a Ford) and it worked with no issue.

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

You do not have the sufficient authorization

Hi Experts,
I am trying to setup Structural Authorization from HCm in BW. I am using 0HR_PA_2 and 0HR_PA_3 extractors to pull the data from HCM in 0TCA_DS01 and 0TCA_DS02. I am able to load the data for both DSO's and Authorizations are generated also via RSECADMIN.
The auth relevant info objects are
0ORGUNIT
0HRPOSITION
0EMPLOYEE
But when i run the query for test user it is giving the error "You do not have the sufficient authorization". Our security guy setup everything for the test user at the back end. Can anyone help me out to fix this problem?

Hi Shehzad
Kindly check the below details and confirm.
1. Check auth objects S_RS_COMP, S_RS_COMP1, S_RS_AUTH and S_RS_DSO as you mentioned data is coming from DSO.
2. Now check the value maintained in S_RS_AUTH and copy that value and go to RSECADMIN and in maintenance screen put that value click on display and check whether these relevant auth is maintained (this you can also check in rsecval table).
3. If every thing is fine then go to tcode - rsecadmin-> Analysis-> Check "Authorization Log" ID and put test user Id there and click on run RSRT this will take you to RSRT scrren and there you can Simple RUN or run with debug also.
Now If error came of No authorization go back and check log in that you will get to know the auth obj which is missing in analysis object.
Suggestion: Simultaneously run ST01, so that you will also get auth obj if any is missing as there may be possibilty of multi-cube so for that there is requirement of some other object.
Hope this will help.. Else please share trace results and role objects which is maintained.
One more IMP point if new query or report is created. it will take some time to synch for other users even 0BI_ALL will not work for that user, need to pass that particular values in analysis object which is required.
Thanks
Bhupinder Singh Arora

I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seem to be checked. Also the read only box is checked and when I uncheck it seems ok but it has not unchecked

I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seems to be checked.
Also the read only box is checked and when I uncheck it seems ok but if I check again it is still checked.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Transport certificate does not have the correct issuer or is expired

Hi all,
I hope this is not a duplicate question.
We are assisting a partner company set up the Flash Access ecosystem. They have asked us to help packaged some content for them using certificates issued to them. I've been trying to package content that works fine when using our certificates but I keep getting this error : Transport certificate does not have the correct issuer or is expire when I try to package with their certificates.
The certificate has not expired. That was the first thing I checked.
Has anyone run into this error? I am using the reference implementation for packaging if that helps.
Thanks.
Pedro.

Hi Katherine,
Thanks for responding.
Indeed I do have the adobe-flashaccess-certs.jar in my path. I was able to package with a certificate issued to our own company. Our Certificates were Trial Certificates. The ones I am having problems with are test PKI certificates that our partner sent to us so that we can help them out.
Please let me know if you need any more info. I am definitely down with helping someone trying to help me!
Thanks.
Pedro.

Error: JAR did not have the correct media type

*** Error ***
A problem occured during deploying application from http://127.0.0.1:1267/Video.jad
Reason:
JAR did not have the correct media type, it had application/x-java-archive
E:\Documents and Settings\MatLab2.R\My Documents\NetBeansProjects\Video\nbproject\build-impl.xml:202: exec returned: 1 BUILD FAILED (total time: 3 seconds)I encountered this just once when I run the sample code from JavaFX here using a mobile emulator. This code is for adding a media player. After that one time, the output doesn't contain error messages anymore and the screen just goes blank.
What does this error mean?
I used:
JDK / JRE 6 u 18
Netbeans 6.8
JavaFX 1.2 SDK
KLite Codec Pack Mega 583

Hi!
I had the same problem as you did. I just found that the problem is that we only add the type JAD to the mime types, but we also have to add the JAR type.
Just add the following line to the mime.types file and it will work:
application/java-archive jar

When I try and install firefox it says that I do not have the correct privaliges- MAcBook Pro.

When I try to update Firefox, it says that I do not have the correct privileges.

You can try to repair the permissions for the Firefox application files and folders.
You can also do this:
Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

The illustration does not have the correct number of operands...

I work on a Macbook Pro 10.8.5. When I open a file in AI CC and place any number of images, save and close the file. When I reopen the file I get this message. 'Can't open the illustration. The illustration does not have the correct number of operands for an operator... etc.' The file scan still open after this but all the placed images disappear.
I've tested placing different formats ie. JPGs, TIFs, PNGs, flattened PSDs etc. They all come up with the same error.
I've searched in Google and I haven't found a solution yet. There was a suggestion to import the AI file in INDD, this doesn't help beause all copy converts to outlines and embeds the images.
Can anyone help?

Hi, just tried this and AI says 'Could not open the file'. Here's a couple of screen grabs to show you my file setup and the exact error message.

Facetime not working "the device to register does not have the correct access data"

I can't use my facetime on my macbook anymore. I used it already a lot of times, but now I have to log in with my Apple ID (and password) before I can use it. After this it asks which emailadress I want to use to make and get calls. After choosing this, it states that "the device to register does not have the correct access data". I can also not change anything at the preferences of facetime, as it has become unclickable (probably because I am not logged in). What to do now?

Create another standard user on your MB. I bet facetime will work from there. Unless you have replaced a motherboard and Apple forgot to flash your old serial number into it. Check serial number in About this mac. If it's not there it is your likely problem.
There might be other problems. Have you tried checking with Apple?

"You did not have the privilege to make changes"

Hey all, I am new to the mac scene, and successully managed to transfer my itunes library from PC format to Mac format with the songs all stored on a USB Hard drive which works great.
However I have tried to rip a CD today and I get the following message:
"Error occured while converting the file - You did not have the privilege to make changes"
Why is this happening? Ive read that it may be a permission issue on the USB HD?
I have only had my mac for 1 day so my knowledge is very limited.
EDIT - Actually, could this be to do with how the USB is formatted? NTFS.
If so, will I have to buy another USB Hard Drive and literally drag and drop everything from the old one to the new one, formatted the correct way?
Thanks
James

Jolly Giant wrote:
baikey_uk wrote:
could this be to do with how the USB is formatted? NTFS.
yes.
Mac OS X can natively read from, but not write to, NTFS formatted drives.
If so, will I have to buy another USB Hard Drive ... formatted the correct way?
that would be ideal. format the drive for Mac (HFS+).
alternatively, you could try installing the _*NTFS 3G*_ driver on the Mac.
JGG
Thanks for that, I will download and install later.
Are there any limitations to using the above driver as against buying a new USB HD?

ITunes 8: You do not have the privilege to make changes

After upgrading to iTunes 8 I get this error when syncing my iPhone.
The iPhone "..." cannot be synced. You do not have the privilege to make changes.
I restored my iPhone hoping this would fix the issue but the error still happens.
Please help!

I am getting this after upgrading to 8.02 but with my iPod, not my iPhone.
I deauthorized the computer and then authorized it. No effect.
I am also suspicious that my iPhone updates are not being applied correctly, though no error is appearing.
This reminds me of authorization problems with the iphone that I have documented previously.
I will blog on this problem here:
http://tech.kateva.org/2008/11/has-iphone-22-created-new-class-of.html
I know Apple has had authentication problems with legacy .mac customers. We're people who's purchases are tied to our .mac address, but we left .mac long before the .me switch.
I think Apple may have unique authentication problems with this group.
Message was edited by: jfaughnan

The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions

Hi
I originally posted this in the Windows 7 Networking forum and they advised to post it here.
We use Windows 7 SP1 clients with Roaming Profile and Folder Redirection and they are connected to a Windows 2008 SP2 server. We are getting issues when someone tries to open files on their redirected Desktop and they get the message "'The item
referred to by this shortcut cannot be accessed. You may not have the appropriate permissions" if you click browse it then defaults to a different users profile. If you click through the errors the file eventually loads. If you open Word from
the Start menu and then browse to the file it opens fine. We have found that deleteting the Normal.DOTM file sometimes fixes the error, but only seems effective 50% of the time. This doesn't happen for all users, and seems to occur in small
groups and not all the time. We have also had the same message come up with someone trying to open Word files an online learning resource we have created.
There are a couple of events showing for about the time the error occured they are:
Type Error Source Application Error Category Name 100 Event 1000
Faulting application name: WINWORD.EXE, version: 14.0.4762.1000, time stamp: 0x4bae25b7
Faulting module name: wwlib.dll, version: 14.0.4762.1000, time stamp: 0x4bae2623
Exception code: 0xc0000005
Fault offset: 0x00034b81
Faulting process id: 0x1734
Faulting application start time: 0x01d0234ef75c42aa
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office14\wwlib.dll
Report Id: 6f74438b-8f42-11e4-9e45-00c2c6506cb5
Type information Source Office Software Protection Platform Service Category Name 0 Event 1003The Software Protection service has completed licensing status check.
Application Id=59a52881-a989-479d-af46-f275c6370663
Licensing Status=
1: 1f76e346-e0be-49bc-9954-70ec53a4fcfe, 1, 1 [(0 [0x00000000, 1, 0], [(?)(?)( 1 0x00000000 30 0 msft:rm/algorithm/hwid/4.0 0x00000000 0)(?)(?)(?)])(1 )(2 )]
2: 9da2a678-fb6b-4e67-ab84-60dd6a9c819a, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
3: dd457678-5c3e-48e4-bc67-a89b7a3e3b44, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
The software protection message we get in clusters of about 6 or more multiple times through the day

Hi
An update. We have approx 400 people with roaming profile/folder redirection on Windows 7/2008 and this only seems to have occurred to about 15 people, and then seems to clear up for a period and then happens again. We also have a similar number
of people with roaming profile/folder redirection on Windows 7/2003 system and we haven't had a report of this issue happening on this setup.
So far we haven't been able to replicate the issue using a test account, so are struggling to find out what is causing it and why it is so random.
Regrds
Dave

Error occurred while converting the file "". You do not have the privilege

I have recently bought a new MacBook Pro and it's my first mac ever. I have imported all my songs into itunes from an external hard drive where i would keep all my music and video's. I went ahead and added it to my mac and everything plays and works fine but whenever i try to import a cd i get this message Error occurred while converting the file "(Song Title)". You do not have the privilege to make changes." I tried changing the sharing and permission settings on the drive but it won't let me so i have no idea on what to do next. Any help is appreciated!

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

"You do not have the correct role to perform this function" on New Site

Similar Messages

Maybe you are looking for