You do not have the required authorization; activity 01 on ZCNTADMCES

Hi all,
Somewhere something is missing. I have imported the transports successfully. However, while executing /Crystal/RPTADMIN I get the above error.
Here I should mention that we are developing connectivity for both BW as well as ECC6. Therefore the transports were imported in both systems. ECC6 server does not complain while creating the new system, but BW system issues auth error.
I have user CRYSTAL created in ECC but is it this user CRYSTAL that is the required in both servers for creation of a seperate system in BO?
Kind regards.

Hi all,
Issue resolved.
In this case above error was reported because ZCNTADMCES object was added in the system via transport, however, it was not under any auth profile ... in my case SAP_ALL. Thereby in SU21, regenerating SAP_ALL profile resolved this issue and /CRYSTAL/RPTADMIN is executable.
Regards.
Edited by: Mohammad Shoaib Ali on Jul 3, 2009 3:32 PM

Similar Messages

You do not have the sufficient authorization

Hi Experts,
I am trying to setup Structural Authorization from HCm in BW. I am using 0HR_PA_2 and 0HR_PA_3 extractors to pull the data from HCM in 0TCA_DS01 and 0TCA_DS02. I am able to load the data for both DSO's and Authorizations are generated also via RSECADMIN.
The auth relevant info objects are
0ORGUNIT
0HRPOSITION
0EMPLOYEE
But when i run the query for test user it is giving the error "You do not have the sufficient authorization". Our security guy setup everything for the test user at the back end. Can anyone help me out to fix this problem?

Hi Shehzad
Kindly check the below details and confirm.
1. Check auth objects S_RS_COMP, S_RS_COMP1, S_RS_AUTH and S_RS_DSO as you mentioned data is coming from DSO.
2. Now check the value maintained in S_RS_AUTH and copy that value and go to RSECADMIN and in maintenance screen put that value click on display and check whether these relevant auth is maintained (this you can also check in rsecval table).
3. If every thing is fine then go to tcode - rsecadmin-> Analysis-> Check "Authorization Log" ID and put test user Id there and click on run RSRT this will take you to RSRT scrren and there you can Simple RUN or run with debug also.
Now If error came of No authorization go back and check log in that you will get to know the auth obj which is missing in analysis object.
Suggestion: Simultaneously run ST01, so that you will also get auth obj if any is missing as there may be possibilty of multi-cube so for that there is requirement of some other object.
Hope this will help.. Else please share trace results and role objects which is maintained.
One more IMP point if new query or report is created. it will take some time to synch for other users even 0BI_ALL will not work for that user, need to pass that particular values in analysis object which is required.
Thanks
Bhupinder Singh Arora

Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Can't create new BeehiveOnline Workspace "You do not have the required..."

I'm trying to create a new BeehiveOnline Workspace. I follow the instructions from the FAQ, but as soon as I click on the "New/Workspace" option, I receive this error "You do not have the required privileges to create a workspace in this Location"
The location looks like "/Oracle" but when I click on the associated "+" icon, nothing else displays.
I am trying to create this new workspace around Mid-Day on Sunday in Australia, so is it possible the system is "down", or is this a genuine privileges error? and if so how do I fix it?

This error is caused by you not having workspace creation rights - BeehiveOnline has restrictions on who can create workspaces. Go to beehiveonline.oracle.com and click on the right button. Find out who the group administrator is of your group and ask them to grant you workspace creation rights.
Phil

A form template .xsn file cannot be accessed. You may not have the required permissions to open the file

Hi there,
When a workflow task is assigned to a user, he cannot open a particular task. and
sees this error in browser:
A form template .xsn file cannot be accessed. You may not have the required permissions to open the file
The ULS Log for Correlation ID has these errors:
The XSN is null and its not a cross server issue. Most likely a permission issue
The XSN is null after attempting to get it from SiteAndWebCache
Please note:
- This user can open all other forms in the same location.
- If I increase his permission to Site Owner, he can open this form - but we cannot allow this.
- He was able to open it earlier - I made minor changes in the form and republished the workflow - since then he is having the trouble.
Any help will be appreciated!
Thanks.

Hi ran009,
Please check if that user has contributor permission on the list that the workflow associated and have Edit item permission on related task list/item.
Also check if the workflow form or other workflow files has been checked out or not. If yes, check it in and test it again. Check Wayne Fan’s post in this thread if you have trouble to check the check-out/in status of the task form.
http://social.technet.microsoft.com/forums/en-US/sharepointcustomizationprevious/thread/cc8dc07b-b73d-424a-a3d4-2a2d7ad84504
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

You do not have the required privileges to create a workspace in this Locat

Hi there,
First time using online beehive, I am trying to create a new workspace so I can add an external user, but get above error when clicking 'new workspace'
Can you help me here?
Thanks
Tony

Tony,
Workspace Creation is restricted to prevent random test workspace popping up and the sponsor of the group is the administrator of the privilege. Contact your group sponsor and explain why you need to create Workspaces and they can give you the necessary privileges.
Phil

Can't activate - activation does not have the required number of digits

I have an old paid version of CS that I have been using for years. I recently had my hard drive repaired and they managed to deactivate my CS. When I try and do the phone activation, after I enter the activation code it says "The number you entered does not have the required number of digits". I am reading it right off the screen in front of me. The only other info is activation type = repair. What are my options? I paid a lot for this and I would like to keep using it. Thanks for any help.

I am having the exact same problem. I have moved my Adobe CS3 to a new computer. Even though I am entering the activation code correctly as displayed on my screen, I still get the message "The number you entered does not have the required number of digits". You can then select to speak to someone, but then you receive a recording that Adobe is no longer handling activation problems via phone, goodbye, and I am disconnected.
How can I re-activate my CS3 product? I have a legitimate purchase and a legitimate license key. Thank you.

Oops, something is not right... Flash Plug-In Warning Explanation: You do not have the Flash player installed on your browser. How to Fix the Problem: This game requires the Flash plug-in. Download the latest Flash player now.

When I try to play certain games on pogo, I get this: Oops, something is not right...
Flash Plug-In Warning
Explanation:
You do not have the Flash player installed on your browser.
How to Fix the Problem:
This game requires the Flash plug-in.
Download the latest Flash player now.
So I download latest still get error message

It is best to go to the source, Adobe, to get their software and updates. Sometimes malware can infect sites with messages that appear legitimate, but will, instead, install malware/virus/trojan on your system. Read the following carefully to install and/or update Adobe Flash.
There are 2 versions of Adobe Flash; an '''ActiveX version''' for IE only and a '''Plugin version''' for most other browsers including Firefox. On a Windows system, you should always update both individually. '''''You do not have Adobe Flash (aka "Shockwave Flash" in Add-ons > Plugins) installed.'''''
#'''Using Firefox''', go to the following direct download link and SAVE the download to your desktop so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#Direct link ActiveX version for IE '''''only''''': http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

HT3775 hello, im trying to open a document but it seems like my computer does not have the require software to open it could you please tell me what can of software do i need in my laptop?

hello, im trying to open a document but it seems like my computer does not have the require software to open it could you please tell me what can of software do i need in my laptop?

In order to help, more information is needed.
What type of document is it (word document, picture or?) And do you know what software it was created with and what file format it is?

Error:This page contains content of "application/x-java-applet" type. You do not have the plug-in required to view this content.

Hi....i m using Mac OS x 10.5.8 with safari Version 5.0.2 (5533.18.5). I just updated the Java version to Java 6 and now m getting below error:
This page contains content of “application/x-java-applet” type. You do not have the plug-in required to view this content.
Please help me out on this....

I am also having a problem with this. My website is hosted through "www.onlinepictureproof.com" and now that my laptop is back from repair with OS X 10.6.8 I am unable to upload my photos to my work website. It says "a plug-in is needed to display this content. Install plug-in" and then a window pops up that says "no suitable plug-ins were found". Below that is "unknown plug-in (application/x-java-applet)" with a link to "manual install" which takes me to "http://www.oracle.com/technetwork/java/index-jsp-141438.html#download" which just leaves me lost. I've tried downloading the "JRE" but I have zero idea what that means or if Im downloading the proper thing. Once I click on the "download JRE" it brings me to a download page where there are WAY too many items for me to choose from to download, when I have no idea what I need or why I need it. please help, this is driving me insane. I actually preferred my constantly crashing laptop to the state its in now, "like brand new" back from apple repair...I have already updated everything that is promted through "Software Updates".
"OnlinePictureProof.com" only directs me to apple support.
Thank you for any help you can offer!
Sheila

HT201364 My 13 inch Macbook pro w retina will not install/download OS X Mavericks because it says I do not have the requirements in order to install it. I purchased my Mac this past month on 11/20/13 so i do not have a problem with it being an older versi

My 13 inch Macbook pro w retina will not install/download OS X Mavericks because it says I do not have the requirements in order to install it. I purchased my Mac this past month on 11/20/13 so i do not have a problem with it being an older version. Please help. This is my first computer so i dont have any experience on how to fix this.

You can't install the App Store version of Mavericks because your model needs a special version. If you ever need to reinstall it, boot into Recovery.

Com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required ext

[ Problem ]
I’m running the sample encryption code and I’m running in to this exception:
"com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required extended key usage". I tried looking it up on javadocs but it doesn’t really tell me what’s causing it. I get this error when encryptContent is called. Is this something in my settings/environment or something with the certificates?
[ Solution ]
If you are using the EncryptContent.java sample code, please check which credential you are using for the "packagerCredentialFile" variable. Make sure this is pointing at the .pfx file containing the packager credential.

[ Problem ]
I’m running the sample encryption code and I’m running in to this exception:
"com.adobe.flashaccess.sdk.cert.ServerCredentialException: Certificate does not have the required extended key usage". I tried looking it up on javadocs but it doesn’t really tell me what’s causing it. I get this error when encryptContent is called. Is this something in my settings/environment or something with the certificates?
[ Solution ]
If you are using the EncryptContent.java sample code, please check which credential you are using for the "packagerCredentialFile" variable. Make sure this is pointing at the .pfx file containing the packager credential.

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

HELP!! When I open Photoshop CS3 it states "Could not initialize Photoshop because you do not have the necessary access privileges".

When I open Photoshop CS3 it states "Could not initialize Photoshop because you do not have the necessary access privileges".
Also, InDesign crashes when trying to open it.
I am running OS X 10.6.8
The most recent task I did was a Mac OS snow leopard software update.
I created a new user account and both Photoshop and InDesign work perfectly when logged into that account, but the problem is persisting with my old account.
I tried, but didn't receive much help from Adobe.
Any help would be appreciated!

I see. Well, if it works on a new account, then I guess that' good enough. You might still wanan try and fix your permissions on zthe otehr account, though. It may just require digging into the terminal and commandline operations to recursively apply this stuff to all folders and sub-folders...
Mylenium

HELP! "Could not initialize Photoshop because you do not have the necessary access privileges"

When I open Photoshop CS3 it states "Could not initialize Photoshop because you do not have the necessary access privileges". The most recent thing I did was a Mac OS snow leopard update. Also, InDesign crashes when trying to open it. A while back I had problems with user permissions and I managed to resolve that, but I think I had to reinstall the entire Master Collection. Any help would be appreciated!

I see. Well, if it works on a new account, then I guess that' good enough. You might still wanan try and fix your permissions on zthe otehr account, though. It may just require digging into the terminal and commandline operations to recursively apply this stuff to all folders and sub-folders...
Mylenium

You do not have the required authorization; activity 01 on ZCNTADMCES

Similar Messages

Maybe you are looking for