You don't have an application to edit this type of file?

Just installed the trial version to learn how it works.
When trying to play around with my site I keep on getting this message/notice "You don't have an application to edit this type of file" everytime I click on edit this page. Does anyone know what this means, and what the issue is?
Thank you in advance.

I never tried importing from the iPhoto library as referenced images. I wonder if Aperture can access images stored in an iPhoto library package? Even if it would work, it sounds like a bad thing to do.
You might consider starting over and this time have Aperture manage the images. That will copy them to the Aperture library, leaving the iPhoto library untouched. This assumes you have sufficient space to make a complete copy of all the images in your iPhoto library plus another copy of each image that Aperture makes as the preview image. You can then back up your iPhoto library (two backup copies, just to be sure) then remove it from your hard drive when you start getting too low on space. As I write this I don't know where your iPhoto or Aperture libraries are/will be located so I'm assuming you have them on your HD.

Similar Messages

After automaticly updated to the version 7 the extensions page in the Add-ons Manager went blank and give this sentence "you don't have any add-ons of this type installed" but all the add-ons still working in the program

All the add-ons I had installed for the version 3+++ still working at the version 7, but the problem is that the extensions page in the add-ons manager is blank except a sentence that says "You don't have any add-ons of this type installed"

https://support.mozilla.com/en-US/questions/826729 has a solution for the problem

"You don't have any add-ons of this type installed." despite having multiple add-ons

Since upgrading to FF 8.0.1, I get the above message when I attempt to access Add-ons, Extensions on my iMac, despite having a number of different extensions installed, all of which appear to be actively working. The problem does NOT appear on my Macbook Pro, also running FF 8.0.1. Both systems have OS X 10.7.1 running. I have tried restarting FF, rebooting, and, of course, clearing the cache.

It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.com/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.com/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

FF4 - Add-ons Manager opens with message: "You don't have any add-ons of this type installed" when I have 25 add-ons installed and usable

Mac/FF 4. Title says it all:
When I go to the Add-ons Manager in FF4, no add-ons are listed, but I'm using the browser and all of my add-ons are available everywhere they're supposed to be.
I have 3.6.16 installed in another directory which uses the same add-ons.

https://support.mozilla.com/en-US/questions/826729 has a solution for the problem

You don't have any add-ons of this type installed.

Working fine then locked up. When I restarted, it reverted back to standard theme and the above message when trying to look at extensions.

See:
*http://kb.mozillazine.org/Resetting_preferences
*http://kb.mozillazine.org/Preferences_not_saved
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.com/kb/Profiles
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.com/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

"You don't have permission to save in this location." Cannot save any files anywhere. All permissions open, all other browsers save OK in same place. Why?

I cannot save any files anywhere. I always get the message "You don't have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the {} folder instead?"
I have created a clean profile in Profile Manager, and used the Reset Firefox tool. The only way I can save files is to use another browser. IE and Chrome have no problems saving files to the exact same folders.
This seemed to have started with the last update on 10/5/2013.

Maybe something changed in the program shortcut you use to start Firefox. Can you check right-click > Properties > Compatbility tab and make sure nothing is selected there?
''I've never tried this myself, but the forum has a standard set of steps for a "clean reinstall" of Firefox to replace damaged program files. During this process, you are not removing personal settings, but you are removing some shared add-on folders, which would affect Windows Media Player and perhaps other plugins/extensions installed that way.''
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete (or if you're nervous, move or rename) the Firefox program folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox (32-bit)
#**C:\Program Files (x86)\Mozilla Firefox (64-bit)
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Does that help?

Photoshop CS5(64Bit): "You don't have permission to save to this location. Contact the administrator to obtain permission." I am the administrator and I give myself permission. What can I do to save the file?

Photoshop CS5(64Bit): "You don't have permission to save to this location. Contact the administrator to obtain permission." I am the administrator and give myself permission. What can I do to save the file? This is the user's PC, licensed PS CS5 software and Win 7 OS.

Temporarily save to another folder, until you figure it out.
Just because you are the owner and are the sole administrator, does not always guarantee that you have permission. There are several folders that you can not access no matter how hard you try. As for folders in your document folder, it is more likely a basic permission setting that took on permissions of a copied file. Some folders and files are set to a child/parent default setting, meaning the child folder/file (the one you are accessing) has the identical settings of its parent and when the parent changes, so does the child.
You can alter the parent or the child folder/file.
Right click on the folder/file select properties.
Click on the security tab.
Click on each of the group names and see what permissions are set.
You can then edit a group if necessary.
If it will not allow it, you may need to use the advanced button to create a new copy of the group which should happen when you alter its settings (In other words, you don't have to physically create the copy, it does it for you when you OK the changes)
The administrator should have full access to the folder in the documents folder, if you are listed as an associate of the administrator group your name should also be listed there with full access. The System should also have full access.
All other groups should have reading access only if they exist.

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

When I get on to on to Itunes it says "You don't have enough access privileges for this operation" and I can't buy music either. How do I fix this?

when I go into my Itunes now it tells me that " You don't have enough access privileges for this eperation" which is causing me other issues with buying my music too. " Could't download purchase........" something like media file and stuff. Does anyone have a solution to this problem. This is my mom's old macbook pro and have never had a problem before. Just down loaded the new updated Itunes today but that didn't help anything. Please help. Thank you

Hey veo1,
I found the following information about that error message:
These messages occur if permissions are incorrect on your designated music folder or on a folder inside your designated music folder. Permissions are settings that determine who can read, write to, or execute a file or folder on your computer. Every file and folder on your hard disk has an associated set of permissions.
Look here for help in correcting the permissions on folders:
OS X:
Troubleshooting permissions issues in OS X
http://support.apple.com/kb/HT2963
Sincerely,
Delgadoh

Cannot move the items. You don't have appropriate permission to perform this operation.

Recently, I upgraded outlook from 2007 to 2010, but I got a problem that I cannot move any mails to personal folder and the error msg is "Cannot move the items. You don't have appropriate permission to perform this operation.".Even I create a new personal
folder in 2010 and try to move mails to it, I still get that error message.
Can anyone help me out please?
Thanks so much in advance.

I've experienced the same thing and was unable to find this key that Tony mentioned. After searching numerous sites, i found this instruction set below and tried it and it worked. Per my case, the key PstDisableGrow was set to 1 under ...\Software\Polices\...
instead. I disabled it and bam, it worked. Give this a try...
Your System Administrator has either enforced a group policy to prevent pst files growing in size or a registry key is present preventing the growth of pst files. One of the following
registry keys will be present based on your version of office (11.0 for Office 2003, 12.0 for Office 2007 and 14.0 for Office 2010). The example below is for Office 2010 (14.0):
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\PST - DWord Value: 'PstDisableGrow', Value: 1
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\PST - DWord Value: 'PstDisableGrow', Value: 1
Best of luck!

"You don't have permission to save in this location"

I believe I have set myself as administrator. Administrator appears beneath my name at sign on. I skipped creating a password as I am the only user. When downloading a file for my canon scaner I got the message "C:\Program Files (x86)\Canon\Cannon Download\tb4135_en.exe. You don't have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the ..........folder instead? " I have tried selecting other directories but get the same result. I successfully downloaded Another program from Canon only minutes before. How can I instal this file/programe? Without it my scanner is useless.
I realise that it is not good sense to run permanently as administrator. Can I set up a separate administrator sign in once I have set up all the programs I lost when installing Win7

Hi,
You may try the following suggestions one by one to check the issue.
Suggestion 1: Temporarily disable antivirus program.
Suggestion 2: Click Start, All Programs, right click Internet Explorer and click Run as administrator.
Suggestion 3: Click Start, type inetcpl.cpl into Search box and press Enter. Switch to Security tab, uncheck “Enable Protected Mode (requires restarting Internet Explorer)” and click OK.
Suggestion 4: Click the Start Button, type "User account control" and press Enter. When the User account control settings box appears, move the slider to Never notify and click OK.
What’s the result?
Arthur Li - MSFT

Why all of a sudden am I seeing: FORBIDDEN You don't have permission to access / on this server.

I can normally access Firefox with no problem. Now when I try to connect to Firefox I see an error message that says: FORBIDDEN You don't have permission to access/on this server. What's up with that? How do I fix it?

Maybe the server is down for maintenance or updating.<br />
Can you post a link?

403 forbidden you don't have permission to access / on this server Error

I just deployed my server 2012 & exchange 2013. Serv#1 domain name is xyz.com. and Serv#2 exchange server: mail.xyz.com. My server is also hosting DHCP Server. After installing the servers, every time when i go to
my website - www.xyz.com (it is hosting by third party Webmaster) it give me error message: 403 forbidden you don't have permission to access / on this server Error. What can I do to result this problem.
Thank you for your help.
Cnet3383

Jim,
Thank you very much for responding on my question. My website is working fine. It only has problem with the segment of network within server 2012. And also, I found out that as soon as I stop the DNS server then i can access my website
without any problem. I am very sure the problem in the setting of my DNS Server. I have all A records are pointing out to internal private ip to Server 2012, Exchange Server, and also external ip to exchange server, and website. Here
is my DNS Mgr setting:
(Same as parent folder) Start of Authority (SOA) (204),serv.xxx.com,hostmaster.xxx.com Static
(Same as parent folder) Name Server Serv.XXX.com
Static (Server 2012 Name)
(Same as parent folder)
Host (A)
173.xxx.xxx.19 Static (Public IP)
(Same as parent folder) Host(A)
10.1.8.1 Static (Private IP)
(Same as parent folder) Host(A)
98.xxx.xxx.83 Static (My website public IP)
(Same as parent folder)MailExchange (MX)
Mail.XXX.com
Static
serv
Host(A)
10.1.8.1
Static
Mail Host(A)
10.1.8.10 Static
Please, let me know if you can figure out what is the problem.
Thank
Cnet3383

You don't have permission to save in this location win 7

Hi am only the user of my laptop and am the admin and when am try to save any file in Local C or on Pen drive I get this message " You
don't have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the ...... " kindly can any body help me ....

I did it already , I want to copy same file to this path C:\Program Files\Java\jdk1.7.0_09\bin even when I want to copy it to the pen drive it's not working . It's given me same message " You
don't have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the ...... "
Under Windows 7 you cannot save files to system folders such as C:\Program Files. One way to get around the restriction is to temporarily turn off UAC. Click Start, then Help, then look for help on UAC.

Trying to download a free app from iTunes: You don't have enough access privileges for this operation

Trying to download a free app from iTunes - Canon CameraWindow. I get the error message:
"There was a problem downloading 'Canon CameraWindow'. You don't have enough access privileges for this operation. Please check that the connection to the network is active and try again"
Please help!
Thanks

Hmmm. Do you also have troubles trying to add new music to your iTunes library?
Does this appear only appear when you try to sync the iPod Nano?
B-rock

You don't have an application to edit this type of file?

Similar Messages

Maybe you are looking for