"you don't have permission to open this file" when trying to attach in firefox ONLY. Works in other browsers and windows permissions are wide open.

Only a problem in Firefox. Works in IE and Chrome. I went thru support ideas of checking windows permissions (wide open and the user is the owner), starting firefox in safe mode and uninstalled/reinstalled firefox. Same problem. Any file in My Documents gives the same error, so it is not file related. Any directory under My Documents works the same. I can move files to Desktop and then they attach fine.

As mentioned in the original post, the user IS the owner and the permissions are WIDE open for the user. I have also tried to disable the anti-virus - no luck. The problem is ONLY happening in Firefox. Chrome and IE work perfect. There is also no problem in Windows. The user can add/remove/edit files in the directory. Right now the solution seems to be to use Chrome. I'm not excited about that, but at this point, the only option.

Similar Messages

  • Why do I get "You don't have permission to perform this task" when I try to restore an application from Time Machine?

    Why do I get"You do't have permmission to perform this task" when I try to restore an application from Time Machine backup on my Imac running Mavericks?

    See Pondini's TM FAQs, for details.

  • You Don't Have Permission to View This Calendar

    I upgraded from Leopard Server 10.5.8 to 10.6
    My site has individual blogs and a group wiki.
    For some reason, I can't access my individual or group calendars.
    It results in an error message saying I don't have permission to view the calendar.
    I did not see an obvious way to recreate the calendar for myself or my group, or to fix the permissions.
    Has anyone else seen this problem?
    Thanks in advance.

    I have a fresh install of 10.6 running on our internal network. Other computers in the network can find the machine. Wiki and Blogs are up and running, and I can edit them freely once I log in via the web interface.
    Initially, the Web Calendar displayed the error you wrote about above... "You don't have permission to view this calendar".
    After finding this thread, I changed the default IP address in the Wiki Server portion of Server Admin to what I thought was the FQDN (machinename.domain.net), but what I actually did was use ".com" instead of ".net" at the end. Oops.
    After a minute, I found the error and switched .com to .net. I still get the same permissions error, but now if I'm NOT logged in as a user, and I try to access any web page, I get a dialog that reads...
    To view this page, you must log in to area “/Search” on machinename.domain.net:80.
    And none of the logins work. After pressing cancel it reads...
    Unable to access calendar, because the Web service is configured incorrectly.
    I can login through the regular login process, but that strange dialog box above will not let me login. Either way I have yet to see a web calendar working.
    Any help appreciated. Thanks.

  • CS4 Admin "You don't have permission to edit this page"

    I am new to Contribute.  Created a website in Dreamweaver CS4, using templates, can put and checkin files, seems fine.  FTP client has full access to all folders.  Site in browser OK, Dreamweaver OK.  Contribute starts and connects OK, access via FTP.  I am the Admin. No lock files.  For some reason Contribute won't let me edit most pages - getting error bar below Address that says "You don't have permission to edit this page".  On some pages the bar is not there, but when I click on Edit Page button a dialog box pops up with the same message.  I tried deleting the _mm folder and recreated the site admin info.  Still no luck.
    Does this sound familiar?  Anyone know how to troubleshoot?  Does Contribute write out debug logs?  Any ideas what to try?  Thanks!

    A bit more info, I hope it helps.  We do not use Contribute Publishing Server.  In Contribute I can create a new page derived from a template and publish it.  If I try to browse to that page again it says I don't have permission to edit the page.  We use FTP to connect.  There is only one FTP account for the website, so it's not an issue of Dreamweaver logging in differently from Contribute.  My standalone FTP client is FileZilla and I cannot view folder or file permissions directly in that program.

  • Forbidden; You don't have permission to access this document on this server.

    I am trying to request Daily iTunes U log reports and I am getting the following error: Forbidden  You don't have permission to access this document on this server.
    Does any one know what it means? Is Identity necessary?
    The URL I am using look like:
    http://deimos.apple.com/WebObjects/Core.woa/API/GetDailyReportLogs/example.edu?​StartDate=2011-05-01&EndDate=2011-06-01​&credentials=Administrator@urn:mace:itunesu.com:sites:example.edu​&identity=&signature=38bda70d9aa6975ae8756754034feb6e3c794aca4b21665f6dc85d2ed4 2d4f6b

    Check to make sure that the user in question doesn't have something in their Hosts file on their desktop.  Otherwise I don't see why SharePoint or the load balancer should be sending them to an Apache Unix web server when trying to resolve Office
    Web Apps.  Something is misdirecting the http request for that user to the wrong server.  If its just one user then I would suspect that something is wrong with TCP/IP locally.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • You don't have permission to mount the file

    I am trying to install
    Microsoft 60-day Evaluation of Office Professional Plus 2013
    I download the file but I get the error message
    You don't have permission to mount the file
    I have Windows 8.1
    I've tried the Chat and Phone some can't help me and other don't want to help me.
    Donald Hester

    Hi,
    This problem may occur for one or more of the following reasons:
    A USB media reader device is attached to the computer.
    Removable media is mounted in the computer.
    The .iso file that you are trying to mount is a sparse file.
    To resolve this problem, use one of the following methods.
    Resolution 1
    Copy the ISO file to a new file by saving it to a different folder or giving it a different name.
    This should remove the sparse attribute and enable the file to be mounted.
    Resolution 2
    If you have a flash media reader or any removable media, try to eject the removable media. Then, reassign the drive letters in such a manner that you leave a lower drive letter available to mount the ISO image. The file might not behave correctly if it has
    an assigned drive that follows other drives.
    https://support.microsoft.com/en-us/kb/2993573?wa=wsignin1.0
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • You don't have permission to save the file "***" in the folder "Users"

    I changed name of Home folder according to this article: http://support.apple.com/kb/HT1428?viewlocale=en_US
    Everything was OK, but today I switch on Aperture 3, and when I'm trying to import some pictures, I have this message: 'You don't have permission to save the file "cichy" in the folder "Users".'... "cichy" is previous name of my Home folder. Any solution, how I can fix it?

    Thanks for quick answerr. Unfortunately I have OS X 10.8.4 - in article are 10 steps for OS X 10.5 or later, and 43 steops for OS X 10.4.11 and earlier... I didn't do step 28 - should I do the instructions for KeyChain?

  • Mount vhdx: You don't have permission to mount the file

    The user has all modify permissions on the vhdx file that was created through Hyper-V. When double clicking or right-click mount the vhdx file the error message "You don't have permission to mount the file".
    Which permissions should be set to mount a vhdx file?

    Hi Adm1nMikeW,
    Please try to use disk management --> action --> attach VHD (this way will  avoid  the error message).
    The root cause is the attribute "nodefaultdriveletter" of the backup vhd was not set to "no".
    You can try following setps :
    1. in cmd prompt type diskpart
    2. recognize the problematic volume you want to set via list volume
    3. run command select volume "volume number"
    4. run command attributes volume clear nodefaultdriveletter
    then detach it and reattach the disk again .
    Hope this helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Getting The operation can't be completed because you don't have permission to access "iPhoto Library". when copy from old leopard timemachine backup

    Getting The operation can’t be completed because you don’t have permission to access “iPhoto Library”. when copy from old leopard timemachine backup.
    any help?

    Welcome to the Apple Support Communities
    See > http://pondini.org/TM/E9.html

  • Face Recognition Error - you don't have permission to perform this task

    Hi..
    I bought my TOSHIBA laptop from Spain, so it would be in Spanish for sure ..
    When i started the lap for the first time I tested the face recognition and other Toshiba software and they all worked .. but after two days i changed the display language to English and now i can't enter face recognition.
    It tells me "You Do not have permission to perform this task. Please contact your administrator for help" ..
    so what should i do ???

    > don't really understand the instructions going through the CMD route
    Using CMD you could enable the real Admin account but as far as I know you can uninstall the Face Recognition software in control panel -> software
    Here remove the face recognition and reboot the notebook.
    This should work too.
    >There are 2 drivers on the Toshiba website, but the latest is from 2010, did this work for you, as it didn't for me?
    It would be interesting to know the notebook model. But the latest version should work properly.
    Important is that you would remove the old version from the system firstly!

  • TM error, "You don't have permission to acces some files"

    Hi,
    I recently formated my Imac uploading Tiger OS to Snow Leopard 10.6.6
    After that I can't restore copies from TM.
    TM says an error, something like " you don't have permissions to copy that files".
    Any idea.
    Thanks for help

    Davidsauron wrote:
    Ok, sorry,
    I had Leopard already installed, after that I restore it to Tiger & installed the new Snow Leopard.
    Why install Tiger?
    You still haven't said exactly what you did, but it appears you now have different user accounts than the ones you backed-up, so they don't have access to the "other" user accounts' backups.
    To restore your Time Machine backups, see #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

  • Just got the iPad mini. Why can't I view my Facebook profile? (I'm using the Facebook app) I can open my News Feed but when I go to my page, it comes out with a notice "page doesn't exist, or you don't have permission to view this page" HELP!

    It's frustrating to not be able to view my own Facebook page using the iPad mini. I have the iPad 1 and the Facebook app works fine there, I can see my personal FB page with 1. Is this characteristic of the iPad mini only?

    Try this:
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    (no media or data will be deleted from the device, this will only take a minute).
    If none of those work, delete the app and install it again.

  • Yosemite Calendar v8: "You don't have permission to modify this event."

    I'm getting this message when I right-click on a day in Calendar version 8.0
    and select "New event":
    What to do?
    HALP !!!

    No, this is the Calendar in the Dock.
    Its been part of the base OS since as long as I know.

  • Spurious error: "You don't have permission to mount the file" on mounting an ISO from Explorer, but it works anyway

    I can mount ISO files from the context menu in Explorer with the new functionality. It works very well.
    However, I have a strange issue with the Microsoft "Linux IC v3.2.ISO" file downloaded from http://www.microsoft.com/en-us/download/details.aspx?id=28188
    Mounting it shows this error:
    But then it seems to mount as a new drive just fine and it is usable. I can also eject it ok.
    I don't have this error with any other ISO. I've tried downloading it twice to different locations, same error. The permissions on the file are normal, same as the other ISOs.

    I have the same problem with my Windows 8 Pro OS.
    http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/3c1a7381-2e53-49ce-a137-b37bd0ae8d7a
    has a good 11 point answer.  It suggests that you ignore the error and go check Windows Explorer to see it actually mounted OK.
    Robert powers-martin

  • You don't have permission to access this server / Widgets

    I am , on both my Intel and Power PC , discovering that the "Manage widgets" suggestion , offer is now selecting NO ! Is this temporary ? Must a person now seek private vendors for such devices as the iStat , etc ?  Thank you !

    Here's a link to user tip with many troubleshooting tips.
    https://discussions.apple.com/docs/DOC-2591
    Try and go through them methodically and post back with any questions.

Maybe you are looking for

  • Display formatted code in html output

    Howdy, I'm looking for preferably a JSTL tag (library) that is capable of transforming a code fragment into neatly formatted code, with syntax highlighting, tab preservation, line numbers, stuff like that. I'm sure they should be out there somewhere,

  • Cracking and hissing sounds on I tunes/I touch

    Can CD's be played if purchased from other than the Itunes store? I have several new CD's purchased from Amazon way before I had my 4th generation ITouch. I've tried to convert it to the Apple extension while being downloaded from the CD to the Libra

  • How can I do to install the toolbar on IE8 reader?

    Hi all, Please I have a Windows 7 ,  acrobat reader XI and I.E. 8. I have need of toolbar Adobe reader. Many thanks

  • Disable Re-ATP check when ship to party is changed...

    Dear Folks, My scenario is as follows, 1. Create a sales order in VA01. 2. fill material and plant. 3. click save or hit enter button. 4. an ATP check will be carried out and the subitem will be created as item number 0011 under 0010 as per the avail

  • How to generate csr for third party code signing cert?

    I've been reading about code signing, but can't see how to generate a csr to use with a third party CA. Does someone have a tutorial, link, suggestion?