"You have included content in your post that is not permitted" when trying to post very positive feedback about Apple.

So I spent 2 hours writing a huge post about how I love what Apple has done with the Audio/MIDI/Sound config tools in OSX. 
I spent alot of time trying to be positive.  And i get to the end and click "Post" - this stops me and gives me the following vague message:
"You have included content in your post that is not permitted."
I am not sure what this means or why it appeared.  I used no negative content in my post, no cursing or trolling or anything... And i wouldn't try to troll or flame on these forums anyways.  I've posted some problems I've had, which were all addressed very quickly by the way.  And I've always said what I thought, but never just posted things to be negative.
And then after my post is rejected, i tried again.  The discussion forums offered to restore my previous draft, but I clicked yes and nothing happened.  Then the entire Discussions site pretty much stopped functioning... I tried closing reopening Chrome.  I tried a completely new session in Chrome Incognito.  I tried using Safari.  None worked. 
I was then offered a survey to take.  I clicked "yes", and nothing happened.  Then I looked at the Javascript Link for the survey and used the Chrome console to send the javascript anyways.  And then it said the survey was behind my browser (it wasn't) and there was an "X" button to close the yellow notification at the top of the page.  Then restarted my computer and it's finally working, but my post is still being rejected, which is ridiculous.
Anyways, went through alot to say something positive.  That is the exact thing that gets to me though, it's the censorship.  Why am I not allowed to say something good?  Hopefully this one goes through...

I don't believe I'm circumventing any DRM/Copyright.  I'm currently enrolled in a Harvard eDx Copyright Law class. As long as you are original and offer a minimum of creativity, you are eligable for a copyright, without any need for registration.  But that's besides the point.  I can see how it may have flagged the post though.
Ultimately, what I was trying to do at the time is play music using software that I own and stream this in online video.  But the comment about streaming my personal music online is just an example of something awesome I can do with an Apple product.
Thanks for the link to the feedback page though.  I'll go ahead and send it in.

Similar Messages

  • You have included content in your post that is not permitted.

    I posted a question in the discussion and replied the response "You have included content in your post that is not permitted." I re-read my post. There was no swear word, no questions about doing anything illegal or violation any TOS, and no link that could cause a problem. So I started editing my post and I found the guilty word: "Streaming" and "Live" together (let's see if it goes through in this post).
    My suggestion is, instead of giving a broad statement, to actually list the words that are not permitted. This will save us time trying to figure out what offended the automated censor.

    EricDu wrote:
    So, once again, legit users are punished for the behavior of a few bad apples (no pun intended).
    Yep. That's the way of the world.
    I still think the filters could be more friendly. Taking, for example, the user's posting history into account.
    I would agree, but Jive, the software that these forums run on, may not allow that sort of flexibility. Or Apple Legal may not allow that sort of flexibility.
    Regards.

  • "You have included content in your post that is not permitted. "  Huh?

    I can't post a message, and am getting the above message. Why? There's nothing wrong or illicit with the simple message I'm trying to post.

    That's because I can't post the message to my other topic,
    "Mail not saving sent messages to AOL "sent items" folder"
    I just resorted to sending a personal messages to one of the responders.

  • I have included content in my post that is not permitted.

    And what content might that be?
    I removed mention of F**mville and M**fia wars facebook apps and that fixed it. But I know I've seen far worse than than after clicking "quote original".

    Hi etresoft,
    We had a persistent re-occurring spammer that used the term M*fia in the posts. To stop them we added that term to the blocked word list.
    Hopefully it won't be needed too often here.
    Nubz N.

  • How do you get music off of your Ipod that is not wanted?

    My ipod has automatically taken all of my music from my itunes library. However there is some music that I do not want to have on it. How do I take selected songs off the ipod? Any help would be greatly appreciated. Thank You

    Use your iTunes preferences (on the top menu bar: iTunes->preferences->ipod
    (with your iPod connected to the computer) and change the transfer preferences to specific play lists or set it to manual update (see below for deleting individual songs). I have several play lists on iTunes which I automatically update to the iPod.
    (from the iTunes HELP file under "ipod preference, deleting songs..."
         Deleting songs from your iPod, iPod mini, or iPod shuffle
    You can remove individual songs from your iPod, iPod mini, or iPod shuffle. (Deleting a song from your iPod does not delete it from your iTunes music library.)
    ¥
    To delete a song from your iPod or iPod mini, first make sure the player is set up to transfer songs manually (in the iPod pane of iTunes Preferences). Then select the player in the Source list, select the song you want to delete, and press the Delete key.
    ¥
    To delete a song from your iPod shuffle, make sure your iPod shuffle is attached to your computer, then select the song you want to delete in the iPod shuffle playlist, and then press the Delete key on your keyboard.
    For information about setting up your iPod or iPod mini to transfer songs manually, search "iTunes and Music Store Help."
    Ed

  • Can you keep extra songs on your iPod that are not in your iTunes library, and not lose these songs every time you want to delete something from your iPod in the future?

    I have all these songs that I want to store on my iPod but not on my computer, and I know that by choosing to manually manage my music I can still hang on to these songs when I add new songs to my iPod.  However, what if I want to delete songs off of my iPod in the future?  Will I lose all of the extra music that is on my iPod but not my computer, due to the fact that the only way to delete songs seems to be by syncing? 

    The answer to the question in the title of the thread is yes, but it is not necessarily a good idea. At some point you are likely to find you need to restore your iPod for one reason or another, or it could be lost, stolen or damaged. If your songs aren't on your computer, and backed up too, then you will be less than happy.
    tt2

  • How do you delete duplicate songs from your iPhone that do not show up in your iTunes library?

    everytime i purchase songs on itunes and sync them to my iphone 4, the songs downloads twice. one as the actual song, and the second one doesnt do anything. when you click on it, it just skips to the next song and doesnt play anything. also this second song has this cirlce dot thing next to it when i am scrolling through my songs in my music...so how do i get rid of this second download? its really annoying to have and it wont let me delete it off my phone. alsoooo since it doesnt show up in my itunes library, i cant delte it off there either! HELP PLEASE

    On the springboard, locate the app you want to delete. For this example, I’ll use WeatherBug.
    Tap and hold down the icon of the application you want to delete. After a few seconds your screen will start to “wiggle” and an X will appear next to each of the apps you’ve installed via the App Store.
    Tap the X next to the icon of the app you want to remove. When prompted, selectDelete.
    And now it’s gone.
    If the application is listed in your iTunes Applications as well, you’ll want to remove it from there – or else it will re-install the next time you sync. Alternately you can keep the app in your iTunes Applications, and set iTunes not to sync all applications, just the ones you want to keep. See the Applications tab of your device the next time it’s connected in iTunes for syncing options.
    http://www.simplehelp.net/2008/07/12/how-to-delete-apps-from-your-ipod-touch-or- iphone/

  • HT204074 How do you delete a song off your ipad that is not listed on the itunes song list?

    Some songs came already loaded with my new ipad air that I hate and want to delete but can't locate the directory where they reside.  I downloaded a file manager app but it only had the option to add new folders, not access the one's already on the ipad.  I signed up for icloud and even bought itunes match at the direction of a blog someone wrote as a way to access the icloud song list and delete the songs.  I deleted the album purchase (that I never made in the first place) listed in the purchase section of iTunes.  The songs are not listed on my PC version of itunes so I can't delete them from there (right click and choose delete).  They are only on the ipad itself.  Why is it so difficult to simply remove a file from your ipad?  Is there a way to delete these songs or am I stuck with them on my ipad music list?  I reset the entire setup thinking it would erase everything on my ipad but that didn't work either.  Please advise.  Thanks.

    Does it play on the iPad?
    What happens when you swipe it left and fight? You should get a Delete or Remove button. If Remove then there will be a cloud icon by the song after you remove the sound file from the iPod.
    If it is U2 album then:
    Remove U2 Album

  • I have a strip on the touchpad that does not respond when I touch it.  Is there anything I can do?

    I have a strip from top of the pad to the bottom where it does not respond to touch.  It makes it difficult to type or draw on my iPad.  Is there anything I can do?

    You can try this - it will not hurt - not sure if it will help.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • What is a good exe.file that is not corrupt when trying to download firefox 3.6.

    Windows 7 / ( Internet Exporer ) supports dial up but with my service provider there is a ( fast-dial-up) available. This is not supported by Windows 7 and Internet Exporer. That is why I need Firefox. I go to www.mozilla.com , then click the 3.6 firefox download, then click another download until a popup happens which asks to run or save the file and I click Run as per the instructions. I have had 3 different exe. files which seem to manage the download but so far every one has been determined to be corrupt by my computer and the extraction has failed. Can someone give me a exe. file from which I can download which is not corrupt.??
    Also any suggestions on how to get fast dial-up with Windows 7 with Internet Explorer would be very appreciated.

    1. "Fast dialup" ''(usually called a "Web Accelerator")'' is a feature normally provided by your ISP. They need to make it compatible with Windows7, not the other way around. That "fast dialup" also may need to be compatible with specific browsers via a plugin or extension for the browser. <br />
    http://en.wikipedia.org/wiki/Web_accelerator
    2. As far as a corrupt Firefox installer .exe, try disabling your anti-virus application for only as long as it takes to download Firefox.
    I seriously doubt that Firefox on Windows7 is going to work with that "fast dialup" if your ISP doesn't support Windows7 to begin with.

  • I am confused why my reply includes  content that is not permitted

    I tried to reply to this topic:
    http://discussions.apple.com/thread.jspa?threadID=2691835&tstart=0
    and got the "you have included content in your post that is not permitted":
    I can't even quote my reply here (was met with the same warning) and am quite certain I did not violate the terms. This is very upsetting - how can I go about finding out what I did wrong?

    Thank you, LS; nothing from hosts at this point.
    What I said - in different words - was something like the OP might have answered his own question if he set up his messages to be stored on the server; that I only have POP but thought if it was an i... account it may have something to do with those settings and that he could move the messages to a different mailbox to make sure the messages would be available in Mail.
    We'll see if this wording will make it; and, yes, I've read the ToU many times, and do not understand why this would not be permitted.
    As it is now, the poster's question seems to have been answered with similar suggestions, so mine (which would have been the first reply) is no longer of value; but I'd still like to know which part I violated.
    Edit - got the same message; deleted the server name and inserted ... and now it worked? At least one of the replies included the server name (three letters starting with an "a") and were successfully posted.
    Message was edited by: Barbara Daniels1

  • When opening the latest version of Iphoto an error message appears that says; You can't open your current iphoto library using this version of Iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the lat

    When opening the version of Iphoto i have an error message appears that says; You can't open your current iphoto library using this version of Iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto. What? If I can't open the current library using the latest version of iphoto, and I am asked to make changes the the newest version!!! I'm asked to run in circles chasing my tail...I had a new hard drive installed about 6 weeks ago. I am running MAC OS 10.5.8

    What version of iPhoto do you have? If you're on 10.5 then you're not running the latest iPhoto
    Any chance that the library was opened with another version?
    Simplest solution will be to just restore from your back up.

  • Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto.  You have made changes to your photo library using a newer version of iphoto.  Please quit and use the latest version of iphoto.

    Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto.  You have made changes to your photo library using a newer version of iphoto.  Please quit and use the latest version of iphoto."  I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to. 

    If you don't have a backup you can resort to give this a try:
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • I just reinstalled and this is the question that show "You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?"  what do i do next

    I just reinstalled and this is the pop up that shows "You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?"  what do i do next? it just keeps popping up and loading but only gives a quit button?

    Update it.
    How old is your Mac? If it's very recent you need to update via the App Store
    If you purchased at the App Store you need to update via the App Store
    Otherwise you update via Softare Update
    Regards
    TD

  • I cannot open a photo library from an external hard rive  I get a message that says: You have made changes to your iPhoto library using a newer version of iPhoto.  How do I access this library?

    I cannot open a photo library from an external hard rive  I get a message that says: You have made changes to your iPhoto library using a newer version of iPhoto.  How do I access this library?

    and
    and have you opened this library with any other computer?
    LN

Maybe you are looking for

  • Non US date format within Workspace and Guides

    Is is possible to change the date format displayed within the workspace and Guides to a non US date format? This really is a show stopper for us as our standard date format is DD/MM/YYYY and the forms won't be usable for our staff if they are not in

  • Select a tray on printer OCE Vario 1200

    Hi all, How can I select a tray on an OCE Vario 2100 when printing from a smartform? I tried to print the sample-text SAPSCRIPT-TRAYTEXT. This should take sheets from several tray's but it only used the default tray. I tried putting printcommands TRY

  • Xcode : Linker command failed with exit code : any idea??

    Hello everybody, I'm trying to implement a programme in C++ using Xcode 6.1.1. in my project I have created different files with .cpp and .h extensions. but whenever I try to compile, I got the message in the attached photo below. Does anyone have an

  • Anyone have accurate instructions on modifying the default user template in Lion 10.7.4 ?

    Never had an issue in the past...not until Lion. After I create my local user, and modify program behavior, dock and desktop wallpaper I copy the contents of the home folder (including hidden folders) to the English.lproj folder. My new users are not

  • I just upgraded from LR3.3 to LR5 and can't print now....

    I just upgraded from LR3.3 to LR5 and now when printing on my Epson 2880 the image is printing only a portion of my image - not placing it properly on the page as it appears in the print preview. I have checked with Epson and they confirm all my page