You have set the device to scan for wireless LANs,...

I don't get the "four small hollow squares" icon show up, like it says in the "Essential Indicators" section of the manual, when I'm within range of a Wireless LAN. I do get "Wireless LAN found" in the status bar on the standby screen. How come I don't get the icon?

17-Jan-2008 07:26 PM
longshanks wrote:
cjilm: yeah he's a drug dealer ;-) needs to make sure he can get a line
Shhhh! Don't tell everyone or they will all want some
It does seem silly the way it works doesn't it.
I don't think the one on the active standby screen refreshes itself so you are best leaving that one switched off.
Message Edited by psychomania on 17-Jan-2008 09:22 PM

Similar Messages

  • My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim if the period of inactivity is less than 7 mins. Please help.  MBP 13" OSX 10.6.8 (2011)

    My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim even if the period of inactivity is less than 7 mins. Please help.  MBP 13" OSX 10.6.8 (2011)

    Doesn't sound like it.  It sounds like you're being logged-off.
    Does your Mac go through the complete Restart cycle -- black screen, gray and/or blue screen momentarily, startup chime, etc? 
    If you're not sure, do a Restart just to watch the process; the next time the problem occurs, see if it's the same.
    You need to know which it is, as these will have very different causes, and different places to look for a solution.

  • You have exceeded the maximum [1] connections for this session.

    Hi Experts,
    BIEE Version:11.1.1.6
    ESSBASE Version: 11.1.2.1
    Below the following path, I have found the log file which the error message, but I do not know why it is and how to solve this problem. 'BIEE_HOME\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\console~coreapplication_obis1~1.log'
    Error Message:
    [Fri May 10 00:50:02 2013]Local////Error(1030006)
    You have exceeded the maximum [1] connections for this session.
    Are you facing the same problem? If you have any suggestions, please tell me, thanks.

    This is an old issue. Read Doc ID 749386.1 on MOS. The suggested fixes are as follows:
    1. The maximum number of connections that are allowed per Port is 250. There is a 250 connection limit per port. Please use a different user ID and desktop as the workaround, so this way a different port can be used.
    2. If using a different user ID and desktop is not feasible, increase the value of the maxlogins parameter as indicated below:
    Increase the maxlogins in the Essbase.cfg file to 5000, and restart Essbase.
    Note: Make sure that there are no sessions active within the EAS console before restarting the Essbase services.

  • HT204053 Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

    Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

    Go to Settings>iCloud and sign in with your Apple ID to create the account.  Then turn on the data you wish to sync with iCloud.  See http://www.apple.com/icloud/setup/ios.html.

  • HT4847 If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free?  So that you are rewarded for the additional devices?

    If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free?  So that you are rewarded for the additional devices?
    If this multi purchase if devices is not rewarded with a larger cloud storage being available, would it then be best to have several separate cloud accounts?
    Would you lose the ability to mesh data between devices???  Of could you choose to share a smaller part of the data and yet save the rest of the device data to their own cloud?  So in other words, split a devices stored data between 2 different icloud accounts?   One community iCloud account for partial data and individual account for data that does not need to be shared with the other devices, however it needs to be backed up.  The simpler solutions would be If you have several Apple devices feeding to the same iCloud account, an amount of storage made available per device (ie: 5 units of storage free per device)
    ~ So that you are rewarded for the additional Apple devices by giving 5 more units of storage or backup space per device

    Nobody here is an Apple employee, and my Christmas Season has been great, thanks very much. Neither am I jealous, I just abhor the fact that so many people these days expect more and more for free, in addition to what they already get for free. First world problems...
    Obviously Apple do consider people with multiple devices, since the whole purpose of the service is to keep data in sync across multiple devices. Clearly, after consideration, Apple decided to give 5GB of storage for free and provide customers with the option to buy more storage if they want/need more, in line with competing services.
    Everyone has their own set of unique circumstances but does that mean everyone should be rewarded with extras for free? At what point should it be considered acceptable to actually pay for additional extras you want?
    And by the way, somebody expressing a different opinion, and discussing people's expectations is not being rude. Aren't you from the country that supposedly takes 'freedom of speech' rather seriously?

  • I work in a public library and we have two ipod touch and two ipod nanos we would like to circulate for our patrons. Any advice on how we can do this? Should we allow patrons to set the device up for personal use or download static content?

    I work in a public library and we have two ipod touch and two ipod nanos we would like to circulate for our patrons. Any advice on how we can do this? Should we allow patrons to set the device up for personal use or download static content?

    With the Nanos, you should have no problem lending them loaded with audiobooks from Librivox, etc.
    As for the iPod Touches, I'm not sure the question is whether you should allow patrons to set up the device for personal accounts, but whether you can prevent them from doing so. Prepare to to a factory restore every time one is returned.

  • Do You have a method of EWS API to set the share a calendar for other another user

    Do You have a method of EWS API to set the share a calendar for  another user , kindly if you can help as soon as possible i'm going to develop an application and share a calendar events as well ,,, thanks my regards 

    You can add and remove delegates.
    https://msdn.microsoft.com/EN-US/library/office/dn641959(v=exchg.150).aspx This does not work exactly like the sharing feature in Outlook in that no sharing message is sent.

  • My daughter disconnected her iPod nano from the lead before ejecting the device.  It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

    My daughter disconnected her iPod nano from the lead before ejecting the device.  It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

    Restoring the iPod will do nothing to his iPhone.
    When you restore it wipes the iPod clean no matter what computer you use.
    The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
    If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766

  • I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

    I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

    iTunes only syncs to Apple devices.
    Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

  • I copied this from your 5.0 download information: "All of the App Tabs you have set when you close Firefox will open as App Tabs when you start Firefox again." When I opened my computer today all my apptabs from yesterday had disappeared. Why?

    Your download page for 5.0 stated: All of the App Tabs you have set when you close Firefox will open as App Tabs when you start Firefox again.
    I liked the convenience of using App Tabs and was disappointed to find that the ones I had set up yesterday were gone today. Am I doing something wrong?

    Works fine for me, I can simulate your problem by improperly closing Firefox.
    The correct way would be to close the windows you don't want and then to exit Firefox through the File ("'''Alt+F'''") menu then use '''Exit''' or '''Qui'''t depending on your system.
    But '''I can simulate your problem''' by closing the good window with "X" in the upper right-corner first (the one with the app-tabs) and then close the other window by any means.
    You restart Firefox and open a window, since you closed without app-tabs there are none so you just see a window with your home page.
    Firefox has some things added to Firefox 4 and therefore in Firefox 5.
    # "'''Alt+S'''" (Hi'''s'''tory menu)
    # "'''Restore Previous Session'''" (that's the window without the app-tabs, but you have to this first)
    # "'''Restore Recently Closed Windows'''" -- can choose which window to reopen based on name and the mouse-over tells how many tabs. or you just use "'''Restore All Windows'''" without the guessing.
    ''I know you are on a Mac, and this affects Windows user more than anybody else, but it does affect other systems besides Windows, occasionally, perhaps more often now with the plugins container.''
    The following may not completely eliminate having to terminate Firefox through the Windows Control Panel but it will come very close.
    '''Plug-in and tasks started by Firefox may continue after attempting
    to close Firefox''' The "X" in the upper right-hand corner closes the
    Window (same as Ctrl+Shift+W) but even if it is the last Firefox window,
    it does not necessarily close Firefox .
    The only '''proper way to exit Firefox''' is to use '''Exit''' through the
    File menu, not the "X" in the upper right corner of last Firefox window.
    In the Firefox 4 and 5 that would be Alt+F then X
    * '''Firefox hangs''' | Troubleshooting | Firefox Support <br>http://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
    Use the '''Windows Task Manger''' to remove all running firefox.exe in the "'''Processes'''" tab of the Windows Task Manager, then restart Firefox.
    If Firefox will still not start, remove the parent.lock file from the profile which is created each time Firefox is started to prevent other Firefox tasks from running, see<br>
    http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file
    '''Avoiding Problems with close/restart''' ''choose either extension''
    :Use to close and restart Firefox after enabling or disabling an extension, switching to a new theme, or modifying configuration files, then you don't have to worry about delay or have to look in the Task Manager to see if Firefox is closed yet.
    Both extensions use the same keyboard shortcut "'''Ctrl+Alt+R'''" or a file menu option.
    *"'''Restartless Restart'''" extension for Firefox 4.0+ only (2 KB download ) <br>https://addons.mozilla.org/firefox/addon/249342/
    *For older versions use "'''QuickRestart'''" extension (34 KB download) (<br>https://addons.mozilla.org/firefox/addon/3559/

  • I have a new iMac. I have set up a user page for myself, for my wife and an administrator page. My question is my wife needs files from my user page transferred to her page. What's the easiest way?

    I have a new iMac. I have set up a user page for myself, for my wife and an administrator page. My question is my wife needs files from my user page transferred to her page. What's the easiest way?

    I've done this by dragging files from my user page to her drop box. In Finder, drag the required files and hover over the hard disc icon in the navigation bar on the left. As you hover, it will open another finder window showing the contents. Work your way down these windows into <Her username | Public | Dropbox>. Drop the files into the dropbox. She can then retrieve them from her user page.
    Good luck,
    Stephen

  • HT1976 I have purchased the device was the work of Yvonne Software did not know that the inside account Cloud I do not know what email I do not know bass Bord please help me thank you

    I have purchased the device was the work of Yvonne Software did not know that the inside account Cloud I do not know what email I do not know bass Bord please help me thank you

    khalid alawad wrote:
    I was in Saudi Arabia and I have been working with the man in the shop for buying and selling devices and the cases of Financial does not allow me lossy money, because I bought more than one device Avon and one of them that you see above, and I have a number 7 Yvonne 5 and 8 Avon 4 I do not want Mabdakhal iPhone but to activate and sell and not Tgrima money please, I want solution and good luck to you my best wishes and please, I want to help me for my loss not to the owner of the shop who work LED \ Ye would have lost my job and my money thank you
    You are making little sense. Antonio's answer still stands.

  • My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

    My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

    To make sure that this is not software related, set it up as new device, explained in this article:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • You have reached the maximum number of PIN changes for this account"

    today i change my device to z10,when run BBW,it shows this message :
    You have reached the maximum number of PIN changes for this account.  Please visit http://www.blackberry.com/appworld/support for more information.
    how can I solve this problem?
    many thanks!

    BBID: **Removed**
    device:z10 stl-2
    pin:**Removed**
    thanks : )
    Edit: PIN, Email ID removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information

  • I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it?

    I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it to accept.
    Thanks.

    Hey Lori,
    You can set or change the password for an Apple ID by following the steps in this article -
    Apple ID: Changing your password - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

Maybe you are looking for

  • Empty rows don't show

    Hello Experts! I have a crosstab, which contains Years on the left and some statstic values on the right for each Schools.  Since not all schools have data for each years.  My crosstab will skip some rows when no data have found for some years of the

  • Flex data Access

    hi i am working in flex and java. i have used blazeds in my flex project i have retrieve the data from mysql in flex project. i have retrieve the records using flex datagrid. but i want retrive the records using textinput. how can i do?? any body hel

  • Gamma shift with LStar-RGB profile

    Hi everybody I have a problem with gamma shift when I import a picture which has the LStar-RGB profile embedded. Anybody else with this problem? Any solutions? If I open the same image in Preview or Safari everything is fine. Thank you Marc

  • Internet explorer 11 will not display video in some apps -advice?

    Sometimes "compatibility View" works and others  not. Research has led me to believe it might be flash player.

  • Combine division,distribution channel

    hello friends, Can somebody explain me why we do combine sales organizations,combine distribution channels, combine divisions, and ref sales organization,distribution channel,division? regards, sekhar_functional consultant