You invoice system is messed up the date is not co...

You invoice system is *edited for profanity* up the date is not correct how can I send you mail with the problem ot attachment?
*edited for privacy*
*edited title for profanity*

Usually this type of thing is caused by code errors that DW is more picky about than the browsers.
Run your page through the validator here: http://validator.w3.org/
Clean out any errors reported. If the problem persists after cleaning the code of errors, post back and perhaps we could take a look at your code to see if there is anything specific causing issue.

Similar Messages

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

If the data is not available in R/3 systems(Ex: MM), who will load the data

Hi All,
Can anybody tell me that if the data is not available in R/3 systems(Ex: MM), who will load the data into that?
Need Helpful Answers....
Regards,
Kiran Telkar

Hi kiran,
The data is generated in the R/3 when the business transactions take place.
No one loads the data into R/3 as it done with BW. R/3 is a OLTP(online transactional processing) system which aides the day to day transactions of a business & theese transactions are stored in the R/3 in there respective tables in the form of records, so one record is generated for each transaction done.
For example there will be record generated in different modules when there is an order placed or when a material is delivered against an order.
Hope this helps,
regards.

The data does not encrypt using Wallet!

Hi All,
I've created a wallet to encrypt/decrypt the data, but when I change any column to be ecrypted by this command:
alter table accounts modify (ssn encrypt); --accounts is the table containing ssn column to be ecrypted.
and then inserting data on it, the data does not appear in encrypted format it appears in it's truth format!
how to make the data ecrypted?

Dev. Musbah wrote:
Hi All,
I've created a wallet to encrypt/decrypt the data, but when I change any column to be ecrypted by this command:
alter table accounts modify (ssn encrypt); --accounts is the table containing ssn column to be ecrypted.
and then inserting data on it, the data does not appear in encrypted format it appears in it's truth format!
how to make the data ecrypted?Did you go back and read that what does TDE(transparent data encryption) actually does? It does NOT make your column look encrypted but makes the physically stored data in teh datafile as encrypted which otherwise can be reverse engineered by someone and can be read. In your case, whatever is happening is the right thing.
For your unmentioned version, here is the link for the same,
http://download.oracle.com/docs/cd/E11882_01/network.112/e10746/asotrans.htm#ASOAG10137
HTH
Aman....

When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.

Hi,
When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.
Active directory attribute co have value vietnam but in FIM Portal country attribute have value VIET NAM
we simply mapped AD Attribite to FIM Attribute for inbound
co===>country
why this happen
Regards
Anil Kumar

Anil, please check what do you have in metaverse. It seems that you have attribute flow precedence configured in a way that doesn't export to FIM Portal.
Let's say you have flows like:
(AD MA)
Import flow: (AD) description -> (metaverse) description
(FIM MA)
Import flow (FIM) description -> (metaverse) description
Export flow (FIM) description <- (metaverse) description
And you have higher precedence from FIM. Then, you would never have FIM value updated - even if value in AD changes. It would be exported to FIM only when you don't have this attribute filled in FIM.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

The data could not be saved because the server could not be contacted - Error

Hello, I'm a beginner in ligthswitch, so, I made a couple of screens and I made the database and attach to the application but when i want to save the new records shows me this error:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again.
The operation has timed out.
I verify the database, the record is saved but the application show me the error.
Please help me I have to deliver this screens today.
Thanks!
Boanerges. Mr 3: 17

Hi Elmer,
I researched this error message, I think you can try the methods below:
Increase the timeout of the connection between the client and the server
Increase Client timeout, and it is set in the Application class in the Client Project
For further information: Error message: Unable to save data

I have a ipod that had photos synchronised to an old computer that has sinced crashed and the data can not be recovered. How do I recover the photos stored on the IPOD to my new computer?

I have a ipod that had photos synchronised to an old computer that has sinced crashed and the data can not be recovered. How do I recover the photos stored on the IPOD to my new computer?

You'll likely need the assistance of some sort of 3rd party software. Keep in mind that the photos on your iPod are only scaled down thumbnail versions of the originals. So even if you do manage to copy them backt to your PC, they will not be in their full original resolution.
Do a simple Google search for "copy photos from ipod" and you should get a number of hits that can assist you.
B-rock

LS Getting the error "The data could not be saved because the server could not be contacted" when deploying on my local desktop

Hi:
I have a very simple test LS App:
1 Table "Person" with 1 property "Name"
One totally standard Editable Grid
So no complicated calculations that could timed out...
When I hit F5 the screen launches and shows the data, but when I try to create a new Person it waits for about 2 minutes and then the following error appears:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again. The Operation timed out.
Despite the error the data gets persisted on the database.
I am on VS 2013 Pro Update 4 and SQL Server LocalDB 2012 (v11.0).

If you decide to try again I would:
1) Uninstall Visual Studio
2) Uninstall SQL Server (all versions)
3) Re-install SQL Server
4) Re-Install Visual Studio
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

Your workout data could not be sent to nike+ because the data could not be

i have been getting this message while uploading data in itunes after using a cybex arc elliptical machine.
"your workout data could not be sent to nike+ because the data could not be validated by our server."
anybody else have this problem and/or solution?

Hello balbew,
It looks like you haven't been the only one recently.
http://forums.nike.com/thread.jspa?messageID=330025
Try waiting another day or two or trying at a later time to see if that makes a difference. It could very well be a server side error.
B-rock

On my iPhone, I have lost all the data in Notes.

On my iPhone I ave lost all the data in Notes.How cn I prevent this from happening again?

Did you recently remove an email account that synced notes or disable Notes for your iCloud account?
Backup your iPhone using iTunes, see this for more info -> iTunes: About iOS backups
You can also sync notes, more info here -> iOS: Syncing Notes

The data is not downloaded in Mobile Client 7.1

Hello,
We encountered a problem in Mobile 7.1 - the data is not downloaded to the clients. The synchronization between Doe and the backend works well, all the relevant information was downloaded to the DOE but when we present the application on the client, no data is dispalyed.
We have two questions:
1. How can we check if the data was downloaded to the client database (we are using MaxDB)?
2. What can be the problem that the data is not displayed?
Thanks,
Sergey

Hi Sergey,
There can be many reasons why data is not present on your client or it can also be that data is already downloaded to the device but not shown in your application. So follow this steps:
Case 1. Data present in device but not shown in application
First of all you need to check if data is already downlaoded to device or not. Since you are using laptop client with MAXDB, there are lots of tools available to check this. Check if there is any data in the tables created in folder "DATA" in your NW Mobile client 7.1. If data is already present, then check what is wrong with your application.
Case 2. Data is not downloaded for your device from DOE
1. First check if you have created any distribution model for your data objects or not.
2. Then check if they are active and generated without any errors.
3. Then check in Rule Administration in portal, if the rules are active or not. If not then activate them.
4. Even if rules are active and data is not downloaded, then check if DMSWCV is assigned to your device or not in device administration.
5. If not assigned already,then assign it and make sure it goes to operation mode. Then only your data will be donwloaded.
6. If DMSWCV is also assigned and data is not yet downloaded to device, then check in device administration, click on "Pending Extracts" link and make sure no instances are present in pending extracts. But if you have pending extracts then click on "Trigger Pending Extracts" link. Then data should be downloaded to device.
Hope this helps.
Best Regards,
Siva.

How do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

how do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

When I take a picture with my iphone, the date does not show when I down load the picture. Is there a way to program this?

when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.

Dropbox "Camera upload" option just rename the files and looks like this.

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that being the studio/rights-holder hasn't feel inclined to provide the date.

You invoice system is messed up the date is not co...

Similar Messages

Maybe you are looking for