You Must Read This!
Attention, plz!
In our place, we dont start the enterprise manager manually. We have a script that does that does that.
Weve written in gedit, or whichever emacs, etc. and put it in the /etc/rc.d/init.d directory.
All scripts here are started at boot up of the system.
We have a script thats set to aid in installation.
Now, am calling on all DBA who know little of shell scripting to come up and we develop this. We will have an absent dba-well the system is the system itself. How will that happen? We will Set a cron task that monitors the database automatically. We will have one chief script that call on other scripts on demand. As in if its six oclock and everyone is outta job, it raises that RMAN and backs up!
2. Releases locks created by users trying to PERFORM DML ON same table Automatically
3. start database and EM auto on bootup
4. logs out idle users for a specified period of time.
5. does automatic audit on suspicious issues, activites.
6. WELL, AM A YOUNG DBA AND AM OUTTA SUGGESTIONS, ADD HERE FOR OTHERS TO SEE WHAT U WANT TO SEE IN OUR upcoming intelligent database.
Be constructive DBAS, add whatever, maybe u cant do it, but someone else can! Linux evolved from this remember
group development
..lets do this, reply this post 4 all others to see now!
Well, lets post the codes here
[b]
Do you actually think I'm going to bother to read this?
You're rewarded with: The Ugliest Post Ever Written Award (TUPEWA - on GNU/GPL)
Yoann.
Similar Messages
-
YOU MUST READ THIS IF v1.1 IS SLOW
Sorry for the topic title in capitals but I just want to help people like me, who have a lot of work with photos and not necessarily want to spend hours reading posts. If someone can make it a sticky, that would be fine.
WHAT TO DO TO MAKE LIGHTROOM 1.1 WORK FAST.
1. Go to Edit --> Preferences.
2. In Preferences go to the tab 'General'
3. In the tab 'General' click the button 'Go to Catalog Settings'.
4. In 'Catalog Settings' go to 'Metadata' tab.
5. In the 'Metadata' tab UNTICK (DEselect) the following options:
- Write develop settings to XMP for JPG, TIFF, and PSD
- Automatically write changes into XMP
6. Click 'OK' to save settings.
And now the rest of the story.
Working with version 1.0 was quite pleasant although not too fast. I've tried different settings, but there was no difference. When upgrading to v1.1 my settings were probably transfered. I don't know what these two options do as I work only with Lightroom and Photoshop. No Bridge, no RAW software etc. I work 99% on JPGs.
When I deselected these options nothing changed in my workflow. When I want to edit in Photoshop I also have the three options (original/copy/original with adjustments). So probably many people won't need that option either. I do not plan to go into the XMP issue any further. Probably there are thousands of people in my exact situation.
To sum things up, when these two options were selected, my computer imported 1940 files in 20 HOURS and after all the thumbs were present the computer was still using 100% CPU power doing something. It took minutes to refresh a set of thumbnails visible on screen (12 thumbs in my case). When I clicked to develop I had to wait 30 minutes for the image to appear sharp in 1:1 view. Lightroom did not want to quit using 100% CPU after 24-27 hours.
When I unticked these options, the same photos imported within 60-90 seconds. Thumbnails were instantaneous and clicking to develop was instant. Also 1:1 was instant.
So sorry once again for the brutal title but I just want to help people so that they avoid reading lots of posts and just getting frustrated.
If anyone is active on other forums, please post the simple solution.
Now I see that Lightroom 1.1 is much better in terms of speed when compared to 1.0.
Machine: PC, Pentium IV 2,6GHz, 1,5GB RAMIf you want the Library function, but don't want all the waiting and loading tedium, let me suggest you use Bridge/ACR4.1 for all the pre Library development and conversion steps in your workflow. including keywording, metadata, etc. Then import to LR. LR Library is not fast, but it is a lot faster if you are only using it for a DB --and perhaps the occasional touch up of an image or two. And, it will do all its importing while you have a cup of coffee.
Then, when they do get it revved up in a future upgrade, you will have your images in the LR DB up to date and ready to go. In the meantime, Bridge/ACR will certainly be faster if you have a lot of images to process.
I process hundreds of images a day at work, and using Bridge/ACR as the first stop in my workflow is fast compared to LR--especially since I use PSCS3 for most of my work--faster because the connection between Bridge and PS is scripted and direct, faster than the one between LR and PS, which is very elementary at this time. The Bridge interface is is more workflow efficient as well.
At this point anyway, going through the LR DB for virtually every operation is just simply slower than working through a cached browser like Bridge/ACR. For some users that is not a price they worry about. For others, like myself, that price is simply too high at this point in time.
I have no complaints, given that Adobe have provided ample workflow design choices for me by utilizing the best of three closely related applications--PS,Bridge/ACR,and LR -
What does this message mean? "itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with ITnes." How do I restore when every time I connect to my computer I get this message?
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards. -
I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!
Turn off your firewall and antivirus software.
-
Went on a Vegas trip on Sept
11th. My iPad worked fine
before getting on the plane. In the hotel about 48hrs later I opened my iPad it
read the message: “iPad is disabled,
connect to iTunes.”
To my knowledge myself, nor anyone else has tried to access my device or
entered the password incorrectly 3 or more times.
I started by updating my iTunes account on my computer to the latest version.
Then multiple times I attempted
the “Use recovery mode”
steps.
e.g.
1. Turn off your device and leave it off.
2. Plug in your device's USB cable to a computer with iTunes.
3. Hold down the Home button on your device as you connect the USB
cable. Keep holding down the Home button until you see the Connect to iTunes
screen.
I received the message on my computer saying “iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes.”
I click the “Restore iPad” button.
During which time the progress bar on my computer’s iTunes
screen was moving very slowly and other times seemed like it wasn’t moving at
all. I would leave my two devices and attached by the cable and upon returning
I would find that the process would have ended before it had completed.
Initially I thought it was a connections issue because I was in remote
locations with slow internet servers. Since being home I have re-attempted the
process and have been able to fully complete the forced recovery but I will
receive a message saying:
“The iPad could not be restored. The disk you are attempting to use is full.
Removing files and emptying the recycle bin will free up additional space.”
What recycle bin is the message referring to? Obviously I CANNOT access any
data on the iPad itself. Just for the **** of it, I did empty my computers
recycle bin and re-attempted the forced recovery process but as I suspected it
did nothing for the iPad and I still received the same message: “The iPad
could not be restored. The disk you are attempting to …”
Please helpHere's a couple of Apple Support articles ...
Resolve iOS update and restore errors
If you can't update or restore your iPhone, iPad, or iPod touch -
ok, so i finally found my ipod. I pick it up and it asks me if i would like to download the latest ios6 software so i did. Then moments later it died, ran out of battery. So i pluged it into my computer via apple usb cord. Then this is what itunes says "iTunes has detected an iPod in recovery mode.You must restore this iPod before it can be used with iTunes". All i want is to get my notes from the utilites section there so important to
If i restore it will my notes still be there, i dont want to restore original settings or something like that .
please help me what do i do?You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004 again. Latest iTunes and OS updates. I cant use the phone now. I did restart the destop,unplug the usb,...etc. Same iTune logo ,arrow and USB on the screen.THANK YOU SO MUCH,...!
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards. -
when I power on it shows go itune logo starts. Then I tried to download restore and update it shows Tunes has detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes. iphone could not be restored. Then an unknown error occuired(1604) shows.an unknown error occuired(1604). Please help me and how can I restore the phone OS. Regards
It also happened to me. What I did was to put my USB connector at the back of my PC (the main USB port) then I open my iTunes again and Viola, it solves my problem.
-
i was downloading the latest software upgrade when the message "Itunes has detected an Iphone in recovery mode. You must restore this phone before it can be used with Itunes" came up. My option of I phone recovery mode says that it will restore the Iphone to factory mode losing all information.
is there anything I can do to prevent this?If the iPhone is in recovery mode, all data is already lost.
Restore it. -
I try to update IOS 6 to my ipad 2/ wf/3g and after about half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can everyone help please. In the screen of iPad appears the itunes Logo and the cable of connectios. Can't do nothing!!!
Click restore in itunes.
-
When performing the new iPhone(IOS6) update I received an error message - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. Will I lose everything if it goes back to factory settings. Right now my phone wont do anything. It is just showing a cable, an arrow and the iTunes logo.
If you restore from backup.
You should have made sure that everything was on your computer bef ore updating anyway. Did you fail to do that?
All pics taken with iphone should be imported to your computer regularly as you would with any digital camera, most especially before any update/restore/etc. Did you fail to do that? -
OS X 10.4.10 Error Message - "you must restart this computer ..."
Hello. I've started up my Powerbook G4 twice and have received a message stating "You must restart this computer..." with instructions to hold down start button to do so. I've had this unit for nearly 5 years with no issues. Am not running any external equipment. I've read that it may be a "Kernal Panic". What is this? I was instructed by a particular posting to record the "panic log". Could someone instruct me further as to my best possible solution? Here are the specifics on my unit and the text from the "panic log"
Machine Name: PowerBook G4 12"
Machine Model: PowerBook6,1
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 867 MHz
Memory: 640 MB
** Panic Log Text Begins Here **
Wed Jan 2 18:54:01 2008
panic(cpu 0 caller 0x000A8A00): Uncorrectable machine check: pc = 00000000008D0468, msr = 0000000000149030, dsisr = 42000000, dar = 0000000019B953DC
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8A00 0x000A7C90 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x2405F000)
PC=0x008D0468; MSR=0x00149030; DAR=0x19B953DC; DSISR=0x42000000; LR=0x008A9428; R1=0x0F993D80; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00032D00 0x008A9428 0x0003C884 0x000A9514
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(405.3)@0x8a6000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x5c2000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48c000
Exception state (sv=0x23C4C000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
Wed Jan 2 19:05:21 2008
panic(cpu 0 caller 0x000A8A00): Uncorrectable machine check: pc = 00000000008D04F0, msr = 0000000000149030, dsisr = 40000000, dar = 00000000E027A2D8
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 00000000fff00000
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8A00 0x000A7C90 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x2EEF1280)
PC=0x008D04F0; MSR=0x00149030; DAR=0xE027A2D8; DSISR=0x40000000; LR=0x008A9428; R1=0x0F963D80; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x0038DFCC 0x008A9428 0x0003C884 0x000A9514
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(405.3)@0x8a6000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x5c2000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48c000
Exception state (sv=0x00D07000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
** End Panic Log Text **
Thanks
Edward CEdward:
Welcome to Apple Discussions.
You are, indeed, having a kernel panic (your computer, that is )
From the panic log you posted my guess is that your Airport card is the culprit. I suggest that you remove the Airport Express card and then try starting up again. If all goes well, clean off the contacts of the Airport card and replace it and see what happens. If the KPs return, you will need to replace the Airport card with a new one.
Please do post back with further questions or with an update.
Cheers
cornelius -
After I downloaded iOS7 and my iPhone turned off I keep getting this message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." I dont wanna lose some stuff from my iPhone.
During a normal install of iOS 7.0.6 this does not happen but something clearly went wrong in your installation.
To fix this, connect to iTunes and restore to Factory. Hopefully your iPad will be working again and you can restore your iCloud backup during Setup. -
I had some new albums I bogut from Itunes and wanted to put them on my Ipod Touch. Went to do that, ITunes said there was an update. I downloaded the update and then I couldn't see anything in my Ipod nor listen to anything. The screen of my Ipod shows a USB cable pointing to Itunes and when I plug it into ITunes again I get the message "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." And the ONLY option it gives me is to restore my IPod to factory settings. I looked online for answers but all I see are people having problems with this because they bricked their phone, which I haven't ever done or even know how to do. Would appreciate some help, planned on spending my day off listening to my new albums.
If you are in the USA you can redown
If the music is not in your iTunes library (it is not in the backup that iTunes makes), you can redownload it if you are in the USA.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Are you in the USA?
What do you not understand? -
My IPhone need to restore, but I want to backup my data first.
Itunes keep telling me you must restore this iphone before it can be used. How I can backup my data?At this point it is too late. When you restore it will restore the backup made at the time of the last sync. And changes to the phone's content after that last sync will be lost.
Maybe you are looking for
-
Account Enrollment Initial Failure
Hello, buddies! I posted 2 discussion messages on the solution accelerators forum. Both of the problems have been solved successfully. But now the next session has come up. My milestone is to use LiveCycle ES for constructing nation-wide insurance sy
-
I have seen this problem here and other forums but I need some clarity.
Hey- (Sorry for the quick post, but I wanted to get this out there before I take off across the country so I might have some help when I am in NY by some help on here.) I purchased my first iPod this past Christmas. it was the iPod Nano 6 gen. I did
-
HTTPService + SimpleEmailForm - Problem with character
Problem with swedish character å, ä och ö in a simple form mail with flex, php and mySQL. Have tried to change this in flex - mySimpleFormMail.mxml: <?xml version="1.0" encoding="utf-8"?> to <?xml version="1.0" encoding="Latin1"?> and to <?xml versio
-
Error in Integration Directory Wizzard
Hi, i am facing a problem with the integration directory wizzard. The Integration Builder Directory is starting. Everything is ok. When i am trying to access the wizzard, the first screen comes up. Now, when i am trying to push the button "Internal C
-
I cannot sync my Iphone 3GS with my IMAC because it says the required file is missing. How do I fix this?