"You must update your system software before using this setup assistant"

Hello,
I've installed the new Mac OS X on my MacBook (CoreDuo) and I'm receiving this error when trying to setup boot camp. I had a perfect installation of it on Tiger, and my system is fully up to date with all the latest updates from Apple so I'm a little perplexed as to the solution?
http://i270.photobucket.com/albums/jj83/chrisageuk/bootcamp.png
Any help would be much appreciated.

Just to update the situation - I found the reason.
For some, unbeknown, reason, journaling was disabled on Macintosh HD. Enabling it resolved the issues.
Many thanks for the help.

Similar Messages

You must Update you system software before using this setup

Hi guys, I checked I saw that I am not the only one to have this problem but didn't find any solution.
Everything is up to date, bootcamp 3.01, OSX 10.6.2 and the main partition is journalized.
So what can I do ?
Please help me!
Thanks

Just to update the situation - I found the reason.
For some, unbeknown, reason, journaling was disabled on Macintosh HD. Enabling it resolved the issues.
Many thanks for the help.

HT1899 Is Boot Camp Assistant supported in Mac OS X 10.8.1? I am getting an error "Boot Camp Assistant cannot be used. You must update your computer's Boot ROM firmware before using this setup assistant."

Please advice I am getting an error "Boot Camp Assistant cannot be used. You must update your computer's Boot ROM firmware before using this setup assistant."

No I have only one physical HDD. Here is a diskutil list result
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.3 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.4 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
Also here is a system info
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
15-inch, Late 2011
current situation
- I've recovered from external drive (mountain lion 10.8.1 ) which i prepared by Lion Diskmaker before.
Current issues:
1) I have Recovery HD but when I boot from it - Reinstall Mac OS X option is not working
2) I have EFI password and won't be able to clear it as well as reset PRAM
3) Boot Camp Assistant is not working as well with the error in the subject
Any ideas how to fix all of these?

Getting an error message while launching bootcamp ""Boot Camp Assistant cannot be used: You must update your computer's boot ROM firmware before using this setup assistant".

Need Help how to address problem with undoing partition from BootCamp Assistant- receiving error message
"Boot Camp Assistant cannot be used: You must update your computer's boot ROM firmware before using this setup assistant".
attempted solutions:
http://support.apple.com/kb/HT3964?viewlocale=en_en
http://support.apple.com/kb/HT1379?viewlocale=en_en
Mac HD is already MAc os Extended(journaled)
***problem still persists with above solutions.

No I have only one physical HDD. Here is a diskutil list result
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.3 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.4 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
Also here is a system info
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
15-inch, Late 2011
current situation
- I've recovered from external drive (mountain lion 10.8.1 ) which i prepared by Lion Diskmaker before.
Current issues:
1) I have Recovery HD but when I boot from it - Reinstall Mac OS X option is not working
2) I have EFI password and won't be able to clear it as well as reset PRAM
3) Boot Camp Assistant is not working as well with the error in the subject
Any ideas how to fix all of these?

Getting message "Camera raw editing is not enabled. you must launch a qualifing product before using this version."

It is on an older macbook that originally has cs4. When I try and open camera raw in cs6, this message appears. Help please!

I found the solution of this problem.
1 Open bridge cs 6
2 Go to Edit - Preferences - File Type Associations
3 Select Canon Camera Raw
4 In the dropdown menu browse for Photoshop CS 6
It appears that the default seeting is explorer settings.
That means in my case the exploroer settings was ACDsee
Please see the screen shot
Hope this helps
//Leif

I recently got an IMacSnow(G4) and installed a larger HD. When I try to load 10.4 it gives me a message: "You must update your computer's firmware before installing MacOS". Never saw this one before. What gives?

I recently bot an IMac Snow G4 and installed a 40G HD. It has 640 mem. When I try to load Tiger, I got a msg: "You must update your computer's firmware before installing Mac OS". Never saw this one before. What gives?

Hi, is this a G4 Lampshade iMac, or a G3 Snow iMac?
http://www.everymac.com/systems/apple/imac/specs/imac_600_graphite.html
http://en.wikipedia.org/wiki/IMac_G4
Anyway, you'll need OS9 installed to do the Firmware install...
http://support.apple.com/kb/DL1283
http://support.apple.com/kb/HT1395?viewlocale=en_US

When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah lah go to iTunes story on your computer. You must verify your payment info before you can make purchases. I did all that

?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah blah go to the iTunes Store on your computer. You must verify your payment info before you can make purchases. I did all that, updated payment info and checked paypal it is verified, and it still won't work. Im stumped

If you still have problem, contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html

When you create a PostScript file you must rely on system fonts and use document fonts

I got this error:
"When you create a PostScript file you must rely on system fonts and use document fonts. Please go to the printer properties, "Adobe PDF Settings" page and turn OFF the option "Rely on system fonts only; do not use document fonts."
This strikes me as bad practice. I only want to use system fonts and document fonts will muck me up.
That being said, I could not easily find a way to fix this with Acrobat Pro XI. I opened Control Panel (Windows 8) and found the printer and mucked around in the various ways to get to change the PDF settings (there are several ways, and some of them present the choices as bold and not just regular). I found two separate switches for "Rely on system fonts only; do not use document fonts" and turned both off, BUT that did not work.
Frustrated, I went back to FrameMaker and clicked File > Print Setup and then for the PDF printer, Printer Properties. There I found a THIRD instance of "Rely on system fonts only; do not use document fonts" that was set differently than the other two. This was the setting the error message meant. Change this one.
Thanks for the convoluted UI, Adobe. What a pain, but there is the answer for all who follow after....

> Windows 7 and Frame 7.2.
This is not a supported configuration and probably does not work, due (I'm guessing) to driver API changes from XP to Win7, which would affect generating PDF and Ps output. This would affect Save-as-PDF and Print-to-Ps+Distill (unless you have a newer version of the full Acrobat product).
As it happens, I'm going to attempt something similar: FM 7.0 on Win7 64 Pro. However, I'm going to install that old FM in "XP Mode".
XP Mode is a 32-bit virtual machine running actual Windows XP inside Win7. It is (now maybe "was") available for Windows 7 Enterprise, Professional and Ultimate (but not Basic, Home or not-so-Premium). When XP went off support life earlier this month, Mr.Bill may have taken down the ability to download XP Mode (or not, since some large enterprises are able to purchase continued support for XP at some great cost). XP Mode never was supported for Win8. There are other VMs for Windows available.
If XP Mode is still available, you also need a CPU that has hardware virtualization, which all recent 64-bit AMD processors do, but which is fused-off in many low end 64-bit Intel processors. AMD processors need a separate unobvious hot-fix patch installed before you do anything else about XP Mode.

TS1292 I registered my iTunes gift card on my friend's computer and when I try to purchase on iPod, I get an error. It says, "your card has expired. To download from the store, you must update your payment information....

I registered my iTunes gift card on my friend's computer and when I try to purchase on iPod, I get an error. It says, "your card has expired. To download from the store, you must update your payment information. Your account has been accessed from a new computer or device, and you must verify your payment information before you can make purchases.

Click here and request assistance. That message means to contact the iTunes Store staff and not to post in these boards.
(98631)

I have apple id but in this week i see this error : you must verify your payment info befor you can make purchases. please help me. i have not credit card but i buying apps with gift card. please help me

i have apple id but in this week i see this error : you must verify your payment info befor you can make purchases. please help me. i have not credit card but i buying apps with gift card. please help me

Why do you keep making multiple posts with this issue? You have now posted it three times in the last hour and have two different people helping you in two different threads!
https://discussions.apple.com/message/18606895
https://discussions.apple.com/message/18606685
This is bad internet manners.

I need an upgrade to iphoto, but it wasn't purchased . the message appear you must verify your payment information before you can make purchases . i have 17$ credit by gift card . i don't have credit card

i need an upgrade to iphoto, but it wasn't purchased . the message appear you must verify your payment information before you can make purchases . i have 17$ credit by gift card . i don't have credit card

Hi ...
You need to take into account any applicable taxes and or fees. iTUNES STORE - TERMS AND CONDITIONS
So if the total cost of the app exceeds 17$, you'll need to purchase and redeem another iTunes gift card.

"You must restart your system" error when installing Tiger on a new drive

While trying to install Mac OS 10.4 from the install DVD the install stops during the "Basic Install ..." phase and I get a gray screen that says "You must restart the system by pressing the power button ....." shown four different languages. I restart installation over and over, it never gets past that first section. Gray screen, panic stop.
I installed a new 200 GB Maxtor DiamondMax Ultra ATA/100 hard drive in my system. The system already had a 120 GB Maxtor. The 200GB is configured as the master and the 120GB as the slave. I have a new SIIG Ultra ATA/133 2 Channel PCI Interface (https://eshop.macsales.com/item/SIIG/SCMP4A12/) also installed.
Here's my configuration.
Power Mac G4 (AGP graphics) 1GB RAM, Mac OS 10.4.8
- SIIG Ultra ATA/133 2 Channel PCI Interface
- IOGEAR Hi-Speed USB 2.0 / FireWire 400 (1394A) Combo PCI Card
- MAXTOR STM3200820A (200 GB drive, master)
- MAXTOR 6B120P0 (120 GB drive, slave)
I tried disconnecting the 120GB hard drive, leaving just the 200 GB on the bus and I get the same gray screen a few seconds into the basic OS install. Tried removing the IOGEAR USB 2.0 card, same message. Since Mac OS X was originally installed on the 120GB, I can restart Mac OS 10.4.8 from that drive and use that drive. Once restarted on the 120GB drive I see the 200 GB drive, Disk utilities see it just fine, drive reports no error in the Disk Utility. The 200 GB disk even formats, I see it on my current MAC OS 10.4.8 as the second drive. I just want to get Mac OS installed on the 200 GB.
If you have seen this gray screen before installing on a 200 GB Maxtor or have any insight I would be most appreciated.
PowerMac G4 (AGP Graphics) Mac OS X (10.4.8) SIIG Ultra ATA/133 2 Channel controller, 200GB Maxtor

Hi Frank,
With all that additional third party hardware it will be difficult to get a proper installation. You can either take out ALL 3rd-party hardware (just leave the 200 GB hard disk in there, but also take out the 120 GB) or you can simply clone the system from the 120 GB disk to the 200 GB disk. You can do that with utilities such as Carbon Copy Cloner.
If this answered your question please consider granting some stars: Why reward points?

Error message when starting Boot Camp: 'You must update your computers Boot Rom'

I installed the latest firmware updated to my late 2011 13 inch MBP. Rom version is MBP81.0047.B24. Now Boot Camp won't start. Says I need to updated my boot rom. But its updated already. Anyone else having this issue? Thanks.

Fire the people that write meaningless message errors. Oh, can't. Get the point though.
you mean you are trying to use Boot Camp Assistant? Boot Camp has become meaningless through over use for too many things.
It doesn't even know bout your EFI frmware, I can say that.
You should though use Lion Boot Camp Assistant and the BC 4.01 drivers for your system.
Zap pram
repair your hard drive with Disk Utility - from DVD
make sure your free space is not fragmented, is contiguous and also large enough, 40 + 20GB for Windows, and still leave 20GB / 20% free for HFS.
And backup(s).

I want to download a free ap, i get the verification required message and sign in. But then i get a notice telling me that "Your acct has been accessed from a new computer or device, and you must verify your payment info before you can make purchases."

I noticed that my credit card info is old. I'm wonering if that could be the reason for the notice. OR does it reallly mean that my account has really been accessed by another source? Of course, this is the first time seeing this and it's Easter!
Any help greatly appreciated.
lisa1952

It means that is is the first time that the device that you are using has been used to make a purchase in the iTunes Store.
I get the same message whenever I buy a new iPhone or iPad. It's normal.

"You must update your system software before using this setup assistant"

Similar Messages

Maybe you are looking for