You Tube Favorites from Two Sources

I am adding You tube favorites from both my iPhone 3Gs and my Apple TV. When I merge the two, many of my saved favorites do not play. I get a couple of different error messages: Account suspended, inappropriate content, and video does not currently support iPhone. I understand the last message, but why the first two? BY the way, there is nothing X-rated here. Thanks.

Hi Anders,
Yes you have to achive that by creating new functions on organization
determination rule. With this assume your partners both Sold To and
Employee Responsible are entered before you save the documents,
and then you set the organization determination take place when
saving the document.
Hope this helps.
Gun.

Similar Messages

Need to merge similar charecterstics comming from two sources

Hi Experts,
I have a requirement to upload data into BI from Two sources. one from ECC is business Sellout history data and from flat file is market sellout history data. Now one source has fields
CALMONTH, Market, Sales Organization, Segment, Super Model, Model, Country Standard, Model Year, ZCOL, Power, Material No., Location, APO Version, Sell-Out History, UNIT
Other source has fields
Market,Model,Type Of Model.
I need to upload this data to BI and merge Market, Model, as these fields are common in both the sources and display Type of model for the respective Market and Model.
Can any one advice me how to proceed desgining this.
Thanks in advance ...
Santhosh.

Hi
An alternative to the above solutions, Create two DSOs and fields of the dsos should like below :
DSO ECC :
CALMONTH, Market, Sales Organization, Segment, Super Model, Model, Country Standard, Model Year, ZCOL, Power, Material No., Location, APO Version, Sell-Out History, UNIT, Type of Model
Bold fields exists in DSO Flat file fields as well.
DSO Flat file :
Market,Model,Type Of Model.
1. First load the data to the flat file DSO.
2. while loading data to the DSO ECC you can populate the model type by writing an end routine to look up flat file DSO to find out the type of model using the condition DSO ECC- market = DSO-Flatfile- market & DSO ECC-Model = DSO-flatfile-Model.
DSO ECC will have the merged data and DSO Flat file is used as a look up table in the end routine of the transformation.
Also note that you can also cube in place DSO ECC if you dont want to stage data.
Hope it helps.
Regards
Sadeesh

Streaming from two sources

Hi:
I need streaming to Flash Media Server from two sources (microphone and sound tarjet)in my pc with FME.
Streaming from microphone connect and start correctly (config stream=streaming1), but streaming from sound tarjet (config stream=streaming2) connect but doesn't start.
Why?
Regards.

Hello,
It is possible that you are seeing the consequences of LabVIEW compiling code written in parallel. More specifically, if you have code in parallel (not connected by dataflow, but in the same block diagram) LabVIEW will split execution time between those parts of your code. Previously you were likely manually starting two separate programs, which inherently adds a delay between the start of the programs, allowing the first program to get sufficiently far in its execution; we could be seeing the consequence of this. It would help if you could be more specific about the details of your setup and code (such as 1. which instruments are connected to which ports? 2. are you writing a command to your instruments and then receiving data as a response? 3. do you rec
eive any errors? 4. if you do receive errors, which errors do you see and where in your code do you first see them?).
Repost with some more information (perhaps a screen shot or your code) and we can get a more definitive answer!
Thank you,
Regards,
JLS
Applications Engineer
National Instruments
Best,
JLS
Sixclear

CSM 12 hour stickiness from two source addresses

We have an environment where the traffic only originates from two source IP addresses (shared port forwarders). The server group need a 12 hour stickiness window for the Citrix sessions to be hitting the same server.
If we have two servers, ServerA and ServerB, this is the problem.
When maintenance is performed on ServerA. All traffic is sent to ServerB. When ServerA is back in operation the traffic does not use this server due to the sticky timeout of 720 minutes.
Is there anyway to clear the connections from one source on the CSM so the processing of packets will spread the load between the two servers?
Thanks.

Ben,
clearing the connections without clearing the sticky table is useless. Because the sticky entry will simply forward the new connections back to the same server.
Also, there is no way to clear a particular sticky entry.
Finally, I think the solution for you would be to create static sticky entry.
You can force a client ip to go to a specific server.
If the server is down for maintenance, the CSM will simply select another one but will go back to the initial one if available.
To configure static entries, use the following commands
sticky 66 netmask /32
static client source x.x.x.x real x.x.x.x
Gilles.

Encuentro bloqueada mi entrada a You tube favorites hay un aviso "No esta autorizado a acceder al recurso solicitado" ¿Como puedo cambiarlo? Yo soy el único que usa favorites.

Encuentro bloqueada mi entrada a You tube favorites hay un aviso "No esta autorizado a acceder al recurso solicitado" ¿Como puedo cambiarlo? Yo soy el único que usa favorites.

How to play you tube video from ipad 3 to my sony hdtv ?

Can I play You Tube videos from my iPad 3 to my PC and to my Sony HDTV without using cables ?Please advise what I have to do ?

only way without cables is to buy an appletv

Why is Firefox crashing when I am playing You Tube favorites playlists and other You Tube videos?

Lately within the last 2-3 weeks I have had a lot of crashes on my computer when I am running Firefox version 3.6.3 and trying to watch You Tube videos. It seems to only crash when I am on You Tube. It crashes even quicker when I am on Internet Explorer or Google Chrome. I have installed the latest version of Adobe Flashplayer recently. I never had trouble watching You Tube videos until recently. The You Tube site will open, I sign in, and then I go to my subscriptions or favorites and select a video. It will begin to play, get a minute or so in, and then I get the error message that it's crashed.
== Crash ID(s) ==
ID: 0fbb30ce-0fdd-4423-9aa3-3f8fe2100528 Signature: cabac_mb_skip

I am not sure I did this right. This is what I did: right-mouse clicked on the desktop, whent to properties, went to display properties, went to settings, clicked on advanced tab, and then clicked on troubleshooting tab. There I drug the hardware acceleration slider to the left to disable it, clicked ok twice as directed, restarted the computer and then I couldn't get firefox to open at all, but I went to internet explorer and got on you tube and tried to watch a video, but it crashed again.
So I don't think that worked. I couldn't figure out how to disable hardware acceleration in the Flash plugin, but did it on the desktop instead. Are there different steps I need to take to accomplish this?
Thank you!

TS3305 I can't access my you tube favorites, forgot username and password

I never had to sign to you tube to view my favorites, the Ipod is now asking for me to sign in because I can't pull up my favorites and I don't recall username or password used for you tube.
Where do I reset the you tube username and password or where do I retrieve it.
thank you,

After going to YouTube - Reset PW and having completed that I am still getting message that Authentication Failed The username or password you entered is incorrect.
Question is the following is the you tube password the same for computer, Iphone and Ipod? I just don't see on the Ipod itself where to retrieve it, been at this for hours.
Thank you for your help.

To Load Master Data From Two Source System

Hi All,
I have a small question :
- Can we load master data from two different source system say from flat file and R3 or any two different or similar source system?
If answer is "Yes", then how?? If possible step by step.
Appreciate your valuable points.
Thanks,
Niraj Sharma

Hi,
Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
I am getting below ERROR.
Object DTP DTP_d55.......could not found in version A.
I have checked the Master data locally for source sys in compounding Tab of the key field.
Please help..
Thanks,
Niraj

Acquiring streaming data from two sources

I�m trying to acquire data from two devices at the same time. I have written two sub VI�s where each one takes the data from one piece of equipment. The equipment is such that they are both constantly outputting data. I have been successful in running both of the sub VI�s separately at the same time. The trouble occurs when I try to put the sub VI�s together in a larger VI. When the two sub VI�s part of a larger VI, both cannot run at the same time. One of the sub VI�s tries to read from the serial port and is unable to get anything in response. Is there something I am missing as to why they can not be running at the same time?

Hello,
It is possible that you are seeing the consequences of LabVIEW compiling code written in parallel. More specifically, if you have code in parallel (not connected by dataflow, but in the same block diagram) LabVIEW will split execution time between those parts of your code. Previously you were likely manually starting two separate programs, which inherently adds a delay between the start of the programs, allowing the first program to get sufficiently far in its execution; we could be seeing the consequence of this. It would help if you could be more specific about the details of your setup and code (such as 1. which instruments are connected to which ports? 2. are you writing a command to your instruments and then receiving data as a response? 3. do you rec
eive any errors? 4. if you do receive errors, which errors do you see and where in your code do you first see them?).
Repost with some more information (perhaps a screen shot or your code) and we can get a more definitive answer!
Thank you,
Regards,
JLS
Applications Engineer
National Instruments
Best,
JLS
Sixclear

I can't stop You Tube video from playing

I was watching a video on You Tube via Apple TV. When I decided I didn't want to continue watching it, it would not stop playing.
I tried everything. Eventually, I disconnected from Apple TV, then turned everything off. I went to bed. This morning, I turned on my MacAir and the stupid video is still playing. How can I stop it?

Eventually fixed it!

Master Data from two source systems

Hi Gurus,
I need to load master data from two different source systems. What is the best way I could do that ?
I know one approach is add system id 0logsys as prefix in compound tab and load it. But problem is master data table will have two different records and in the report it will display 2 records, can not summarized it in the report. But I need one record in the report. What is the best approach ?
Thanks
Liza

Hi,
Create two DataSources. one for each of the source system.
Create two separate flows to the master from these two DataSources.
Hope this helps!

Why can't i link to a you tube video from email on 4s?

I received an e-mail from a friend with a link to a specific You Tube video but when I click on the link, I don't link to the video itself, it brings up the You tube home screen. I have the You Tube app downloaded on the phone.

Does the link work on a different device or a computer? It's possible the video they linked to is not available for viewing on a mobile device, or that the link is bad.

Related to calculation of value from two source files

Hi, we have two files based on volume and costs
Time,Item,site,ASM,Retail are dimensions..
The volume one is:
May-09     item 1     Site 1     ASM 1     Retail     VOL     100
May-09     item 2     Site 1     ASM 1     Retail     VOL     150
May-09     item 3     Site 1     ASM 1     Retail     VOL     130
May-09     item 4     Site 1     ASM 1     Retail     VOL     120
May-09     item 4     Site 1     ASM 2     Retail     VOL     150
May-09     item 4     Site 2     ASM 3     Retail     VOL     100
The Cost one is:
May-09     item 1     Site 1     1.2
May-09     item 2     Site 1     1.3
May-09     item 3     Site 1     1.1
May-09     item 4     Site 2     1.3
May-09     item 4     Site 1     1.5
note that in the second file site,ASM are missing (this was the problem for us from source file)
Here in essbase we need to calculate VALUE = VOL * COST with respect to item and site,such that in selection critera
the value must be represented with respect to ASM and Retail dimension also.
Psl post the approach and the sollution how to load this and how to calculate..

Hi,
You would have to transform the second file to include the ASM and Retail dimension members. It is essential that you have one to one relationship between Site, ASM and Retail. You can maintain the mapping in a separate file and then read the cost file and get values for ASM and Retail from mapping file.
Otherwise in the load rule, you will have to specify one single member from each dimension - ASM, Retail in the header definition.
Once you have the data in the system, you can run a calculation to calculate the value of VALUE. Or else, you can also define a formula on VALUE.
Let me know if it helps.
Cheers
RS

NOW can I sync from two sources?

I keep my itunes library on my iMac (40GB, most purchased from iTunes), and my iphoto library on my Macbook pro. With Original Apple TV, according to local Apple store you can't automatically sync form two different sources. Anyone know if the new update will allow this? Really would love to have an Apple TV if it will always keep my current iTunes music/movies from my imac and always keep current photos from my iMac.
Anyone know? Thank you.

It will only sync from one computer, why not sync your photos and stream your music and everything else from your imac, exactly what I do except I do it from one mac.

You Tube Favorites from Two Sources

Similar Messages

Maybe you are looking for