You tube only working in 32 mode

Just tried to watch an instructional video on You-Tube and got only a black screen with no play button. After checking all the help files and forums there, I discovered it worked with 32-bit mode. When I switch back to 64-bit, the problem returns.
Have others discovered the same thing? Is there an alternative solution? I need 64-bit for a couple of plug-ins.

I know it works - it was you said the reason is it isn't supported - but it is.
The plugin seemingly still works in 64 bit safari, just not on those main youtube pages that use javascript to write the object/embed code; it also reportedly works even in 64 bit if you alter the user agent... so it seems likely to be a youtube error in browser detection leading to no object/embed being written - which would cause exactly the black non-functioning area that many have described, just as disabling javascript does...
Right or ctrl-click where the flash video should be - what does it show?
if there's an 'inspect element' there - they haven't written the Flash object/embed code to the page.

Similar Messages

  • My ipod will only work in disc mode

    My iPod will only work in disc mode, when i take it off of disc mode it appears with the apple sign but nothing else -
    help please.

    Yes a Restore will erase your iPod. But this shouldn't be an issue since you obviously must have your music in your iTunes library or backed up somewhere else, RIGHT????? After all, it would be silly to have all your music on just the iPod and no where else, RIGHT?
    Patrick

  • RSA1: You Can Only Work in Client 001 issue

    Dear All,
    I am having SAP NW 7.4 SR1 as abap system ,I have created one new client ,while runnning RSA1 t code i ma getting below message
    RSA1: You Can Only Work in Client 001...
    I have cheked below
    1. Go to Transaction SE16, and enter table RSADMINA
    2. Change the BWMANDT field entry to the client number you wish to use
    above is the solution for this issue ,but i ma unbale to chnage the client in se16
    here chnage option is gayed out.
    Please suggets is there any alternative for this
    Thanks

    Hi Basis,
    Please follow below steps to edit.
    SE16n---> Enter table RSADMINA ---> Provide /h on command field --> press F8 key --> On the screen provide two inputs GD-EDIT & GD-SAPEDIT with value X for both & click on change icon.
    After that press F8 key again,now you'll be able to change the things.Please follow same for other table,if you want these tables under change mode.
    Regards,
    Gaurav

  • Monitor only works in safe mode

    My monitor only works in safe mode.  when restart in normal mode the monitor screen is blank.  when I start in safe mode the monitor works fine.

    Is there a reason you have not entered the menu as I have suggested and reset the monitor to factory default?
    Your old school monitor needs a kick in the pants to remind it that it is plug n' play. That is essentially what the reset will do. It won't hurt anything.
    Was the TV you had connected to the PC before using the monitor an HDTV one with 1080p resolution?
    In order to reinstall the graphics driver you will need to be logged in as a user with elevated (admin) priveleges. A standard user cannot install drivers or programs. You do not heed to reinstall RAID drivers.
    You might need to consider replacing the monitor with a modern LCD display. They are quite inexpensive these days and can evven be found in the second hand market. 
    If you don't want to do that then you can remove the video card and then connect the monitor VGA cable to the video output port on the rear of the desktop PC. Removing the card will enable the onboard video.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Upgraded to osx10.8 and only works in safe mode

    I just upgraded to osx10.8 and only works in safe mode!  What now?

    "works in safe mode" meaning you do not get instant kernel panic when you boot up, and instant kernel panics on boot-up were happening before?  If this is the case, it may be that one (or more)  of your third-party log-in items is incompatible with 10.8.  

  • SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

    Hi BI Experts,
    I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
    When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
    I appreciate all your input.
    Regards,
    OSR.

    Hi,
    Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
    If you want it in different client, you change it in BWMANDT field of RSADMINA table.
    hope it helps.
    Regards,
    Pruthvi R

  • Itunes wont work.Says there has been a problem with the program and then shutsdown. only works using safe mode

    Recently itunes stopped working. It will only work using safe mode. i have check the plug ins folder but i have no plug ins.

    Hello MaFiosoXIII
    For issues with iTunes crashing and only working in Safe Mode, then check out the article below to continue your troubleshooting to get it working again. 
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Regards,
    -Norm G.

  • I get no pictures on you tube only sound, why

    I get no pictures on you tube only sound, why

    The first suggestion of moving the slider solved the problem--although it has to be done each time I open a YOU Tube--but I can do that!! Thanks.

  • Fresh BW Installation : You Can Only Work in Client 001

    Hello All,
    I am doing a BI 7.4 installation.
    Till now i have just installed NW7.4 ABAP system. I did some of post processing steps after installation like STMS, SGEN.. etc.
    We want to have client 100 for BI usage. So i created 100 client with client copy with SAP_CUST profile.. is this corrrect ?
    Now i have 2 question..
    1. When i run RSA1 in 100 client, I get error "You Can Only Work in Client 001" ? Did i performed wrong client copy ? What is correct procedure. I do not find anything in Installation guide for NW.
    2. I need to deploy BI_CONT addon. I can do this with SAINT.. is there some post activity.. which activate something ?
    best regards
    ashish

    Hi
    1. When i run RSA1 in 100 client, I get error "You Can Only Work in Client 001" ? Did i performed wrong client copy ? What is correct procedure. I do not find anything in Installation guide for NW.
    Kindly refer the SAP Note 316923 - Termination of program RS_CLIENT_COPY_BW
    2. I need to deploy BI_CONT addon. I can do this with SAINT.. is there some post activity.. which activate something ?
    Kindly refer the SAP Note   153967 - BI Content Release Strategy
    1808103 - BI_CONT 737/747 SP04 and higher: Information on Add-On SPs
      1808103 - BI_CONT 737/747 SP04 and higher: Information on Add-On SPs
    BR
    SS

  • ERROR : You can only work in client 900

    Hi,
    There are 2 clients in the BI environment.
    Client 200 & Client 900.
    Client 900 is used for testing.
    Client 200 is used for development environment.
    We are able to use Client 900 without any problem.
    But when we login in client 200 and execute t-code RSA1"
    following error occurs.
    "You can only work in client 900
    Message no. BRAIN009
    Diagnosis
    Your SAP BW system can only operate in client 900.
    Procedure
    Log on in client 900."
    Can someone suggest solution for this.
    rgds
    Prashant

    hi,
    check oss note 522569-BW: Working in several clients (especially APO 4.x/SCM 4.x)
    and thread
    Re: Is it posible to work with multiple clients in BW?
    hope this helps.
    522569
    Symptom
    You cannot work in several clients in the BW system or in a system that uses BW as a basis (for example: APO Demand Planning).
    Other terms
    MANDT, client, source system, APO, SCM, ERP, Bank Analyzer
    Reason and Prerequisites
    In BW, master data IDs and dimension IDs are taken from number ranges. The BW objects against which the number range intervals are client-specific are cross-client objects. As the IDs must be unique, these may only be determined in one client. This means that BW can only operate in one client.
    The BW objects are cross-client. They can be accessed and changed to the same extent in all clients. BW is displayed identically in all clients. In particular, there is only one Myself source system as this is used to generate the change log for ODS objects. Therefore, when the Administrator Workbench is started, the system checks to see whether you are working in the same client in which the Myself source system was created.
    Some extractors from the APO system only work in the client in which the data was created (this is due to the fact that the LiveCache is used). As the Myself connection does not change the client, the extraction of this data must be started in the same client in which the APO data was generated.
    For more information about client-dependencies for SAP APO and SCM 4.x, refer to the paper "SAP APO 3.x & SAP SCM 4.0 Multiclient Capabilities" in http://service.sap.com/scm -> mySAP SCM Technology -> "Installation, Upgrade, Migration, System Copy, Client Dependencies". The direct link for the paper is: http://service.sap.com/~sapidb/011000358700006688312002.
    Solution
    Particularly in SCM/APO it can make sense to use several clients for BW in the SCM/APO system, because the SCM/APO Customizing is client-specific. CAUTION, this note only applies to SCM Releases as of 4.0. For Releases below SCM 4.0, see note 384057.
    In SCM as of 4.0 (BW 3.0), it is possible without a BW modification to log on in several clients and to also use the BW functions in these. In addition to this note, you must also take some restrictions and other information into account. This information is maintained centrally in the paper mentioned at the beginning of the note.
    BW 3.0B
               Import Support Package 2 for Release 3.0B (BW3.0B patch 02 or SAPKW30B02) into your BW system. The Support Package will be available once Note 493971 "SAPBWNews BW 3.0B Support Package 02", which describes this Support Package in more detail, has been released for customers.
    Proceed as follows:
    The default client must still appear in the BWMANDT field in the RSADMINA table. Under no circumstances must this entry be changed. Otherwise it may be impossible to use the data in all InfoCubes and all master data tables. Numbers are taken and only created in this client.
    Using transaction SM59, create an RFC destination for this default client with the following attributes:
    RFC destination (name)
    Connection type:         R/3 connection
    Client:                  Default client from the RSADMINA-BWMANDT table
    The connection must have a password or it must be set as a Trusted System. It must be possible to log on using this connection without additional passwords being requested.
    Enter this RFC connection in the BWMANDTRFC field of the RSADMINA table.
    When you work in different clients, you must take the following restrictions into account:
    BW releases lower than 3.5
    BW does not support the connection of new source systems (also file source systems) outside the BW standard client. Only one "myself" source system can be created.
    It is considered possible to connect a client other than the BW standard client to an external BW as a source system. Although you can do this using note 609167, this involves restrictions that are mentioned below in the "BW Release as of 3.5" section.
    Proceed as follows if you want to upload data into your new client (also ODS update and file source systems). This is not valid if note 609167 has been implemented):
                         In your new client for all source systems, from which you wish to upload data into non-BW standard clients, create partner connections as an IDENTICAL copy (including names) of the partners in the BW standard client.  If you are setting up the new client for the first time, you can use the client copier (transaction SCCL).
                         Create the BW background user (generally, BWREMOTE) with the S_BI-WHM_RFC and S_BI-WX_RFC profiles. Make sure that the name is the same as the name in the BW standard client.
    BW releases as of 3.5
    BW does not support the connection of new source systems (also file source systems) outside the BW standard client. Only one "myself" source system can be created.
    The Administrator workbench can only be called in the BW standard client.
    You cannot upload data into a client other than the BW standard client.
                        As of BW 3.5 with PI BASIS 2004.1 or higher, you can connect another source system besides the BW standard client as a separate source system to BW (extraction from another client within the system), provided the BW standard client and BW background user have been entered in the Myself destination. See note 538052.
    Authorizations/roles
    Like users, authorizations are also client-specific. If you work in several clients, you must ensure that the necessary authorizations and roles exist in the other clients.
    Client copy
    No client copy may be performed in the BW standard clients. This would destroy the versions of the number range intervals and thereby make the BW data inconsistent.

  • You Can Only work in Client 001

    Hi Gurus,
    I Installed ABAP Netweaver successfully, and i tried to connect to BW workbench using Transaction RSA1, i get an error message which states that "You can only work in client 001", Please how do i solve this problem. i need a detail step by step in solving this problem because i am a beginner.
    Regards
    Gabriel
    [email protected]

    hi
    You can also try this
    You need to make client XXX as your default login client. For this change the value of profile paramter login/system_client accordingly in RZ10. Further execute the function module RS_MANDT_UNIQUE_SET in SE37 with value of i_mandt being set to client XXX (in general the client where you want to execute this transaction).
    regards
    Jameel

  • You can only work in client 000, Message no. BRAIN009

    Hi Expert,
    when i go for Information Systems > Business Information Warehouse > Business Explorer > Modeling > RSA1 - Administrator Workbench: Modeling
    You can only work in client 000
    Message no. BRAIN009
    Diagnosis
    Your SAP BW system can only operate in client 000.
    Procedure
    Log on in client 000.
    Reg,
    Rahul

    Hi,
    You cannot work in client 000, so have to change the client to your required client.
    Do the following to change the client.
    Step 1: Log on to sap system with your new client.
    Step 2: Goto T-Code se11
    Step 3: Goto Table "RSADMINA"
    Step 4: Select Contents(CtrlShiftF10)
    Setp 5: Execute it.
    Step 6: Double click on the report (Eg: Bw )
    Step 7:In "BWMANDT" field give your client and save.
    Reward points if useful
    Regards,
    Rakesh

  • You can only work in client 000.-RSA1 issue

    You can only work in client 000.
    I am not able to run transaction RSA1 in my Production system.
    Do I have to change some settings in SCC4.
    Advance thanks

    Hi,
    Is yours a new system. Then take a look at this
    You would need to create a new client as a copy of 000 as you cannot work in client 000. Refer to the Installation guide.
    Also refer to OSS Note:116811.
    Check this link:
    Re: client creation
    Re: BW can have multiple client?
    Bye
    Dinesh

  • Indesign CS6 only works in safe mode (windows 7)

    I have installed the CS6 suite in Windows safe mode (after multiple attempts did not work in normal mode, it kept stopping at 2% installed) using the Adobe application manager. I am on a trial period, my company is going to start paying monthly after the first free month.
    All the adobe products work ok (photoshop, illustrator, dreamweaver etc), except Indesign. When I double click the icon, the hourglass appear for a few seconds and nothing else.
    If I double click the Indesign icon with Task manager open I can see that it appears as a 'process' for about 10 seconds, then disappears.
    If I go into Safe mode Indesign will open and work but obviously this isn't ideal.
    How can I fix this?
    Any help would be great.
    (I have done all the usual things, like uninstall the whole package & install again, restart etc. I also ran the Adobe suite cleaner tool incase old versions on this computer were interfering. I uninstalled everything, and deleted the Adobe folder etc.)
    I am using Windows 7 Professional with a fast processor, 8gb ram.

    Ability to run in safe mode but not in normal Windows operation could point to a conflict between InDesign and the driver for your graphics card. In safe mode, only a generic Windows video driver is used, regardless of your video card. Otherwise, whatever secret sauce driver provided by the provider of your video card is used. InDesign, as well as other Adobe applications, depends heavily on your video card and if your video card supports direct access to its GPU (if it has one), these applications make use of same.
    See if there is an updated driver for your video card that you can download. From what I can see, some of the video card manufacturers almost have a driver du jour posted to fix various problems reported by users. If you have the latest driver, see if there are settings associated with “optimization” or “performance” via any control panel item or utility associated with the video card and try scaling those back. That might finesse the problem.
              - Dov

  • Only works in safe mode

    Help....I am only a novice mac user (so I need help in the most layman terms possible).  Seems all my Apple products are going kaput; first one being my macbook (early 2008 model).  Looks like my disk drive isnt working correctly; I put in a new hard drive.....I went to reinstall Snow Leopard then upgrade to Lion.  Ever since then my mac only seems to work in safe mode.  I used my imac to load snow leopard....(with firewire); and downloaded lion from app store.  is there a way to wipe clean and start over?  There is nothing on the computer that I need.....I keep all my important files on an external hard drive.  my big concern is I dont know how to do it and second since I dont have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again.  I have seen others have had similar issues...I just cant seem to figure this out.  If anyone can help I will be eternally grateful!
    Ray

    When your in safe mode try going to the Disk Utility and doing a Disk Repair. Repair Permissions. Then see if that lets you boot normally. If that doesn't work you might need to reinstall Snow Leopard again then upgrade to Lion. (Lion will still be available under your App Store Purchases tab and you don't have to pay again).
    I recommend you using Time Machine. Not only do you save yourself the trouble of copying things to your External Hard Drive, but if you run into something like this again restoring it from Time Machine saves you all the time you spend downloading Lion and Installing Snow Leopard. Plus everything is exactly how you last backed up. Everything!
    Best of luck.
    By the way, if you don't see the App Store when you install Snow Leopard just do a software update from the top left apple icon of your system and you should see it when its done.

Maybe you are looking for