Your able to stretch a little bit deeper
Your able to stretch a little bit deeper going a little farther this is also a really great stretch to-do in the bathtub here sitting in a tub full warm water and it warms up
your muscle tissue and improves your mass circulation so it makes it easier to stretch so you can really just say in bathtub with your legs extended in front view just gently fold your
Somatodrol body forwarding you can stay here for a nice long time it feels really nice and this really great stretch for people that have a low back problems there's
a lot of times tension in your low back can be a result tightness in your hand streams say your hands trains are pulling on your pelvis and kind of throws everything out of whack and yellow backing up your spine says stretching your hands trains on regular
basis will help the Lincoln out that muscle tissue and relieve tension along your low back services really nice really good .
http://intrafitne.com/
Michael,
the following links should help you:
Leopard Developer Graphics & Media Overview
Matthew Craig of Luxology uses OpenGL and Quartz to build the complex and powerful features of modo.
Mihalis.
Similar Messages
-
Filcking right a little bit on trackpad makes webpages stop working.
Sorry if my English is broken...
I'm using Safari 7.0.3 on Mac OS X 10.9.2 installed MacBook Pro.
The trouble is just as menthoned in the title.
If you have Majic Trackpad or built-in trackpad, try these steps... These steps make the problem happen.
Open Safari.
Visit some webpage.
Then visit another webpage.
Finally, using trackpad, flick rightwards a little(as you do when you go back to the previous page, but do it just a little bit & release your finger quickly).
And when those steps 'work', following horrible glitches will happen:
The webpage you're visiting is shifted slightly to the right and the webpage you were visiting before can be seen a little. (This is the sign of 'success!')
The webpage stops working. You will never be able to write into a textbox on that page and so on.
You can't visit websites in that tab anymore. You can see webpages being loaded, but nothing happen in your tab.
Trackpad scrolling in other tabs is blocked until you close the tab in question.
I'm surprised because I've never had such a problem before...
So, the question is: What is this caused by? And how can I prevent it? (Well, trying not to flick a little IS one solution, but not this time XD)There are reports that this problem can be solved by simply restarting, or by resetting the PRAM.
-
Firefox links / icons are a little bit messed up?
Hi All,
This is what my screen looks like:
>>moderator edit: Removed large image. Please read Forum Etiquette: Pasting Pictures and Code. Thanks. --fsckd<<
Even though I clicked the Firefox Beta in the middle of the screen (I'm using firefox-beta-bin from AUR) icon, the Firefox icon on the left was Firefox Beta - Safe Mode (as if I clicked the Firefox Beta - Safe Mode). Does anybody know how to fix that?
This is a little bit off topic: does anybody know the css classes that I need to modify to make the icons in the middle of my screen smaller, closer and their labels bigger? I wish there were "firebug" for gnome shell.
Thanks.
Last edited by fsckd (2014-04-29 13:22:59)Yes, I was getting those same errors when I posted yesterday.
And the thing is, when I first saw that happening, I thought that it would, within a couple of minutes, and become a full Discussions shut down. But that never occured, so it wasn't too bad.
My technique was to do this kind of thing was:
- I click "Reply" to a post, and begin typing. When I have completed my post, I click on the "Post message" button.
- I am confronted with a "500 Timer already cancelled" message.
- I ended up figuring out that, no fear, just refresh your page. (your post won't be cleared, since you are at the "post!reply/messageview" page).
- I see my post, and go to the category where I post in, and get a "An error has occured. We apologize..." Same goes for this error - I simply refresh my browser, and the iPod category (which is where I mainly post in) begins to load up properly.
So, I was able to manage like this by constantly refreshing my browsers. Not really nice to have, but still, I liked it much better that the Discussions were actually sustaining by showing errors, but actually not coming to a full crash.
-Kylene -
Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)
Hi, Tom.
FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
• My my "Multiple applications quit unexpectedly or fail to launch" FAQ
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
i dont know why the battery life of my iphone 4 is so low ! i really want to know how many hours i'll have if it's on standby. And how many hours if i use it normally for music and facebook (sometimes a little bit games) !!!
to enhance your battery life, keep screen display to minimum, set screen lock automatically after 1 min, select internet notifications to off.
-
Recently erased my entire mac HD do to mavericks update going wrong. I do not have a back up for my music. But my itunes match account has all my music. If i add this computer with my itunes match will it put all the music i had back in my itunes library or just upload the little bit of music i purchased on itunes in the past that im only seeing now in my itunes? I do not want itunes match to sync or upload the little bit of purchased music i have on my itunes now..Please Help Thanks..
Hello gogreenj14,
If you had iTunes Match updated with all of your non iTunes purchased content already, then yes, when you enable iTunes Match with the following article it will have all the content that has been uploaded to iTunes Match will be available for download.
iTunes: How to add a computer or iOS device to iTunes Match
http://support.apple.com/kb/ht4913
Open the latest version of iTunes on the computer you intend to add. You can download the latest version of iTunes here.
Sign in with the Apple ID you use with iTunes Match.
Choose Store > Turn On iTunes Match.
Click the Add This Computer button.
When prompted, enter your Apple ID password.
iTunes will automatically begin scanning your computer's library for matches.
A status indicator will allow you to track progress. You may also manually pause and resume the process at any time by clicking the Stop or Start button.
Once iTunes has completed matching and uploading your iTunes library, your music in iCloud will be integrated into your local music library. A download button will appear to the right of any content that you have in iCloud that doesn't already exist on your computer.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
How to reduce the screen a little bit?
Don't know why the Screen Breadth wise is to wide. How to reduce it a little bit?
Hi,
Try pressing the Escape key once to get out of the full screen mode,
then taking your cursor and grabbing one of the corners of your Safari screen to set it to the size you want.
See here for more info on full screen vs standard mode
OS X Yosemite: Take apps full screen -
[Thinkpad Yoga] Just a little bit of baby pee: few keys kaput!
Hi,
The other day our baby peed on my laptop. I don't know whether it was on purpose, he just tells me brrrruu. Now, these keys are not working: Backspace, Left Shift, Esc, Tab, T, Y, [ and ].
I had this before, with just a little bit of water, exactly the same. Then they replaced the keyboard. Unfortunately I cannot send it back for repairment.
What to do? I've heard of trying to clean it with a pressured air can, I'll try to find that one. Any ideas?
Btw, I thought thinkpad keyboards were water proof?Your baby is quite precocious by so eloquently expressing his opinion about your TP... :-)
As the human urine does contain conductive and corroding salts (more than the sea water), I'd open my TP, take the KB module out and try to wash it with distiled water. Then let it dry and put it back.
This should gently dissolve and remove the potential shortcircuits, w/o the aggressivity of pure alcohol - professionally used for quick repairs in such case. Also the smell will vanish ;-).
Strong opinions are costly, particularly when the point is made with bodily fluids :-) -
Some text on my screen appears a little bit "higher"
Hello everyone
Today i noticed that the date-time and the browser type line appears a little bit "higher". This happened after a restart i think, but i'm not sure.
Here is what i mean:
Links to screenshots:
http://imageshack.us/photo/my-images/825/screenshot20110708at119j.png/
http://imageshack.us/photo/my-images/59/screenshot20110708at129.png/
Thank you for your time,
BillOh and also "confirmation" buttons ("Done", "Force Quit", "Apply", "Relaunch") and any selections i make appear such as the above, some pixels up.
Here is another two screenshots:
http://imageshack.us/photo/my-images/26/screenshot20110708at201.png/
http://imageshack.us/photo/my-images/155/screenshot20110708at216.jpg/
Was it something i did??
I have no idea what i could be! -
The device need to be very close to the router to connect to the network otherwise it disconnects when it is far little bit.
Try resetting network settings - 'Reset Network Settings'
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support -
Why only for me my webpage is little bit broken?
Why only for me my webpage is little bit broken not showing correctly? With other browsers is OK, but then i using Firefox 4+ version it's little bit broken, my friends using same browser like me, but for they website looking good. Please help me, because i don't like use old firefox versions :/
You can see how for me it look's: http://img818.imageshack.us/img818/8585/unledal.jpg At normally the text from panel's should little bit exposed from panel.Fix your coding so your web pages are displayed in "standards mode" rather then the "quirks mode". The problem with the quirks mode is that it forces Firefox to guess your intentions about how something is to be displayed, when your friends view that page Firefox guesses right, but for you Firefox is guessing wrong. Eliminate the "guess" factor and Firefox should display your web page the same for all users. <br />
http://en.wikipedia.org/wiki/Quirks_Mode
Plus, once you fix the code, maybe you can get rid of that NO IE logo that appears when someone uses IE to view that page. Times are changing, IE 8 and even more so IE9, can display web pages almost as good as Firefox, Opera, and Chrome, and if not the web page is more than likely at fault. -
I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume, basically the speakers just sound weird, there's no word to describe it, I can't really hear any bass from my speakers
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement. -
I bought a new mac and i migrate with time machine...but the backup was a little bit old and weren't save the latest modify i made in my website.. is it possible take the uploded site in iweb? sorry but i don't speak english very well
But what can I cut and paste? the html code or image and text directly?
depend on which template you used.
if you use iweb photos page template then you need to search for my photos page solutions in this forum.
@ot: cut and paste from the online version
@rw: You can drag an image from the website to the Desktop
have your try your methods in iweb photos page? -
Footage fades a little bit half way through interview, how do I fix?
Greetings!
I'm working on a Doc that has interviews with Celebrities, one of the interviews is with Linda Evans and about half way through the interview the lighting fades a little bit. It's just a gradual fade, happens over 10-15 frames, but it wasn't me that did it. Perhaps the camera man changed the Aperture or someone dimmed the lights. Either way, it's noticeable and I was tasked with fixing it. Ugh!
http://youtu.be/FDWA2wLUjtw
Anyway possible to do some sort of correction using FCP to fix it or am I pretty well up the creek? Any advice would be *huge* as this is a major project and will be playing on the PBS channel KLCS in LA this Spring so I'm going all out on this one. Thanks in advance!
Best Regards,
MattyAPply the 'brightness and contrast' filter to the clip. then go into the clip and you should be able to keyframe the filter. (I don't have my mac in front of me to verify, sorry)
Another way is to use the blade to cut the clip right where it starts to fade. APply the brightness and contrast filter to the darker part, brighten it up a bit and if you fiddle just right you can adjust the brightness seamlessly.
Another cheaters way could be to cut to any B roll or another angle during the fade. Depending on how dramatic it is people may not even notice the difference, or you can make any alterations and they won't see them because they won't be able to remember just how bright it was before. -
I need a little bit of guidance.
My plan is to make a PKGBUILD, but I've ran into a few snags. I'm trying to make PKGBUILD for ToME-223-src (Troubles of Middle Earth). But first I want to compile and install it locally so I'll have a good idea of how to make the PKBUILD right and to test it for awhile. So the PKGBUILD is something later on to worry about.
I have a bit of delimma. For some reason, the developer(s) of this game have the binary for it to use suid (I'm not sure their reasoning since I'm not a very experience programmer). Fortunately, in the makefile, it uses the variable OWNER=games by default. This is what is responsible for setting the ownership of all of the files when "make install" is ran appearantly. This presents a few challenges.
When you get to the point of where you make install it, it's install rule wants to recursively run chown on all the files being installed like a nice and tidy makefile does. So if you're not logged in as root when you do the "make install" it gets choked up a bit and doesn't copy/install all the files. So a regular user account doesn't generally have needed privileges to run chown and it has to be assumed when someone is going to install my tentative package they won't either.
Another delimma is that since it wants to utilize suid, this creates the necessity of a regular user account to be the owner of these files (I don't like the idea of this game running with root privileges personally). We don't want root ownership on whatever files have their suid bit set I would think. So this will require the making of the appropriate user. Again, this usually requires high enough privileges by the person building.
This of course could be solved by using useradd in the build function, and the having builder being logged on as root when they makepgk, but I really don't like that nor feel it's a very kosher approach.
Any idea of how I can come up with an elegant solution to this? How is this sort of situation normally handled with ABS?If a package needs chown on install, or a new user created, this is typically done in the .install script. When pacman installs the pakcage, the .install script is run as root.
Based purely on your description, my suggestion would be to skip the make install stage, and use install commands in the PKGBUILD to put the files in the right places. In the .install script, create the required user and associated permissions.
Here's a typical example.
Maybe you are looking for
-
I need to embed a standard font (such as Times New Roman) and make it so that the document opens with this font presented. I see information on embedding fonts, but nothing related to the second part of my question. Thanks.
-
Hello everyone Im from Australia and currently using a iphone 16G 3G. well, i have insert a optus prepaid sim card in to iphone with $0 credit, how come i still can use internet which is through cellular data? Will it be charged at a fee? It would be
-
Specified module can not be found ... CS4
I have been using the CS4 trial for just over 2 wks now and all of a sudden I am getting this error. The specified module could not be found. C:\Program Files\Common File\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL When I open a picture
-
Email Alerts not being sent to SMTP
I am setting up email alerts. I have set the dependencies and verified the SMTP address. I have generated the alerts that should have genertated emails as a test. However, the emails are not going out. I successfully tested SMTP relay functionality u
-
have Mac OS X 10.6.8; Put a few iPhoto-photos to 'burn folder'; press 'burn' symbol. This window appears: 'Burn - The disc can't be burned, bcause the device failed to calibrate the laser power level for this media'; what to do next to address this?