Your advice about my program: WapcamServer1.3

Hello everyone,
I made a webcam server soft, which has pretty advanced features and transform your usb-cam into an IP-cam.
It has its own webserver, an FTP upload feature as well as motion detection.
I have little feedbask about it, so I'd like you all to tell me what you think about it. What you would expect from such a program, what I did wrong, and of course some bug reports.
Thank you in advance for your help

Hi,
I tried your soft: great job !!!
It just lacks a little documentation, but is quite easy to use.
The webserver is very nice, even the icons are not so easy to read.
Motion detector is waow, very impressive, what library did you use?
I also appreciated that it appears in the tray on mu KDE desktop
Keep up the good work :,)

Similar Messages

  • Need your advice about image creation

    Hi,
    I am trying to create image of my c partition on Satellite A100-529 - no luck. Norton ghost freezes (booted from DOS) just after start, g4l cannot load (kernel panic), partimage, being a part of SystemRescue CD package does not see the hd drive! Has anyone tried using any image creation/restore software other than Toshiba Recovery CD? Any luck with it? Please let me know.
    Thanks in advance for any help on that matter.

    Hello Czeslaw
    I have very good experiences with NORTON GHOST 2003 (Version 2003.775). This application runs under Windows and I have tested it with several Toshiba notebooks. It works perfect.
    I use my unit just for work and I create image every two or three weeks. I create it always on partition D and if something goes wrong I can start Ghost application and restore the unit from partition D. If you want you can also create DVDs.
    Bye

  • Need advice about a WiFi set-up

    Dear Gang,
    I want to have a pure 802.11n network using the 5 ghz spectrum and the wide array setting. However, I have one desktop computer that is 802.11g. I'd like to run a 25 ft. Cat 5 cable to one of the LAN ports on the TimeCapsule and then shut-off the WiFi on this computer. However, strangely enough, I've always had all my computers (even desktops) networked via WiFi so I don't know how well using the LAN works.
    What are the thoughts of the group?
    I know that ethernet should give me greater speeds to the TC's hard drive and should solve my problem with bringing a non-802.11n machine in to a "pure" network, but I don't want to do so if the set-up is arduous or if doing so makes me lose a lot of features that I get in an all WiFi network.
    TIA,
    Mark

    dwb,
    I'll definitely take your advice about the ethernet cables - thank you.
    Your info is reassuring as it means that my dual G5 will get a little more life out of it by connecting it in to my "pure" system via ethernet.
    Two other quick questions:
    -should I connect my new iMac via ethernet to the router, too, even though it's capable of going on my system in 802.11n 5ghz?
    -also, as an aside, I'm trying to figure out if my new 802.11n network will equal my current 802.11g network in terms of distance as I have an Apple TV that's a few rooms over. That Apple TV gets about 4 bars of signal from my current network. Do you think that 802.11n at 5 ghz will have an equivocal range?
    Mark

  • Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

    Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

    Hi ,
    You might want to refer the following link to find your serial number and activate your software .
    Here is the link for the same.
    https://helpx.adobe.com/x-productkb/global/find-serial-number.html
    Let us know how it goes .We'll do the best possible to get your issue fixed.
    Regards
    Sukrit Dhingra

  • Advice about buying new Macbook

    Hi all,
    I'm trying to decide between the Macbook Air and the Macbook Pro with Retina display, and I'd like to see if people have advice about which one would better serve my needs.
    This is my only computer, and while it needs to be portable, it doesn't need to necessarily be the lightest possible (Macbook Air).
    What I do want is at least 256GB of storage. Right now I have 156GB, and I'm almost maxing it out. I've had to take things off my hard drive to make more room. I have a large iTunes library and a large iPhoto library, and I want all those things on my hard drive.
    I also want good performance because that's where my 2008 Macbook is not doing so well - gets very slow, esp when iPhoto and similar apps are open.
    I need to be able to work with several apps open - Word, Excel, Adobe Reader, Chrome, etc. I don't need to do a lot of gaming or sophisticated video editing or anything like that - I work mostly with MS Office programs.
    So is the Macbook Air good enough or should I get the Macbook Pro?
    Thanks!

    The Air should be ample for your described needs.  If weight is not a consideration, the Air has by far the best battery run time, so if a lot of work is done without an AC outlet available, that is some thing to take into account.
    The Pro has a superior display and is a more powerful machine, but the extra power is not needed for what you have described.
    Personally I would urge you to consider installing as much storage as you can afford.  Using external HDDs in the field gets very old quickly.  Over time data has a habit of increasing.
    One important point to keep in mind, with both the Air and the Pro, no future upgrades are available at this time so configure the unit accordingly.  I would spend my money for upgrades in this order, storage, RAM, CPU.
    Ciao.

  • Its working just fine but does it look good? Take a look and give me your advice!

    I got to say that this is my first finnished labview program, and  it's working fine, almost no problems. But i'm not that shure about
    this huge while loop with all its instructions. Normaly a while loop takes 1 ms to iterate once, but this loop takes more than one ms,
    I'm using another subVI to catch data up to 5 ms. / sample as output from measurement device to  the while loop in this Sub vi, and then from this sub VI i'm initializing the data value read from the Measurement device, to a global variable that i read in this huge while loop.  I belive that the subVI while loop iterates several times before the huge loop iterates once. Meaby thats why my graphs for the data are plotting more than one data at a time.
    Take a look and give your advice, it seems that all the measurements are well. And I don't really got problems with the program when running, exept from small delays when I switch the sample rates.
    Regards
    Zamzam 
    HFZ
    Attachments:
    WhileLoop.JPG ‏354 KB

    I agree with Titou.
    Wow!  That's an eye-full. 
    There are some functions like setting audio On / Off that may not need to be in there.  Or do they?  You'd have to describe what the loop is supposed to do.  Same comment for the indicator display settings on property nodes.  Do you intend to turn them on/off a number of times during an iteration of the loop?
    You should "divide & conquer".  By that I mean, use sub-vi's that are function specific.  As mentionned by Titou, you should have a look at the development guidelines.   Basically, now that you have a working loop, you can improve it by creating some sub-vi's, revisit some items that may  not need to be in the loop.  As a matter of fact, you could create some control & indicators and maybe transform the loop into a sub-vi as well. 
    There are many Case Statements that you could convert to sub-vi's and that way, you could eliminate the global variables by using indicators and wiring directly to them.
    However, I would have to say that the value for "Write Flow Data" might become unpredictable due to race conditions.  Revisit how the value(s) are set for that one.
    But it does look like you had some fun doing this one.  Which is the most important thing.  To have fun implementing solutions with LV.
    Happy wiring!
    JLV

  • Advice about external hard drive recovery

    Does anyone have experience or advice about external hard drive recovery?
    I have a USB external drive that crashed during a power brownout, I couldn't mount the image at first but used Diskwarrior to rebuild it. Now I can see and navigate the drive but I am unable to pull many files off without the finder crashing. It would transfer about 130mb of 10gb then stay at that number and not progress past that amount.
    Should I try a different recovery program or would removing the drive and placing it in another external drive enclosure solve something like this?
    any help appreciated

    When in DW there is a Preview to see the old and new volume.
    http://www.macintouch.com/readerreports/harddrives/topic4557.html#d10aug2010
    Data Rescue 3 demo will show you what it's scan finds, costs $99
    http://www.prosofteng.com/products/data_rescue.php
    you need to have another drive to recover your files to.
    Yes I would try another case, maybe the power brick was all that is now half-dead also
    And you really need a UPS - never be w/o
    http://pondini.org/OSX/UPS.html
    MacBook Pro:
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Question about the programming of a legend

    Hello everybody,
    I have a question about the programming of a waveform's legend. I
    already asked here in this forum about the legend programming (03)
    months ago.
    I went satisfied but I ve just noticed that this code
    (See Code old_legend_test.llb with main.vi as main function) operates a
    little different from my expectances.
    Therefore I have a new question and I want to know if it
    is possible by labview programming to plot and show, on a waveform
    chart, a signal with activ plot superior to zero (0) without to be
    obliged to plot and show a signal with activ plot equal to zero (0) or
    inferior to the desired activ plot.
    I give you an example
    of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
    and each signal corresponds respectively to a channel (Chan1, Chan2,
    Chan3, Chan4). I want to control the legend (activ plot, plot name and
    plot color) programmatically. Is it possible with labview to plot signal
    1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
    without to active the signal with the corresponding activ plot zero
    (0)?
    Let see the labview attached data
    (new_legend_test.llb with main.vi as main function). When I try to
    control the input selected values again I get them back but I don't
    understand why they have no effect on the legend of my waveform chart.
    Could somebody explain me what I m doing wrong or show me how to get a
    correct legend with desired plots? Thank by advance for your assistance.
    N.B.
    The
    both attached data are saved with labview 2009.
    Sincerly,PrinceJack
    Attachments:
    old_legend_test.llb ‏65 KB
    new_legend_test.llb ‏65 KB

    Hi
    princejack,
    Thanks for
    posting on National Instruments forum.
    The behavior
    you have is completely normal. You can control the number of row displayed in
    the legend and this rows are linked to the data you send to your graph. Thus,
    if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
    which data you want to display in your graph using the property node (Active
    plot and visible). But for the legend as you send 3 plots there is an array of
    the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
    this array but you cannot control the order in this array! So, to be able to
    change this array you have to only send data you need to you graph. I'm not
    sure my explanations are clear so I have implemented a simple example doing
    that.
    Benjamin R.
    R&D Software Development Manager
    http://www.fluigent.com/
    Attachments:
    GraphLegend.vi ‏85 KB

  • Advice about using the laptop with closed lid while connected to external display

    Hello all HP forum members!
    I have an ENVY 17 with Win8.1 64bit, a great laptop, but I need an advice about using it while connected via HDMI cable to an external display (TV).
    When I play heavy 3D games, the computer produces more heat than usual (of course this is normal), but doing so with closed lid, could this harm the  display in some way, as a result of the heat?
    Thanks!

    Hi @VVel ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 17 Notebook and issue with keeping the Notebook on while closing the lid. Here is a document on changing the Power option.
    Control Panel - Power Options - upper left - Choose what closing the lid does.
    Change Plan Settings and also check Advanced Settings. Make sure you do this for both battery and power.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Multiple copies for Payment advice using standard program RFFOAVIS_FPAYM

    Hi Experts,
    I have one requirement, need to print the payment advice form twice (one for account section and other for vedor). According to the existing process it uses standard SAP print program RFFOAVIS_FPAYM OR RFFOUS_C (for cheque payment) to print the output.
    When I tried to print the output by giving number of copies, it prints test pages but not the actual output. The actual payment advice note with proper values getting printed only once. I actually need to print this actual payment advice note twice.
    Do you experts know how to achive this? is there any configuration available to get this requirement? OR how can i do this without chaning Standard SAP program?
    Thanks in advace for your help..
    Regards,
    Prashant

    Hi,
    2 times printing can be done using Sap script.however, it would call for changes to your driver prog...
    in function call CALL FUNCTION 'OPEN_FORM'....u need to add  g_ITCPO-TDCOPIES = '2' and pass g_itcpo to OPTIONS structure of the FM.With this you can ahve 2 copied of ur output. I just test printed it.
    So in your case as yours is a standard program, you could probably create a copy of the Standard program and  add the above logic in your program.
    hope this help
    Cheers,
    Varna

  • •     Re: "MSVCR80.dll Missing" Thanks to mspanner and others for you help. Followed your advice, which worked.

    Re: "MSVCR80.dll Missing" Thanks to mspanner and others for you help. Followed your advice, which worked.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (If this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Need advice about zip rar files

    Here's wishing you all a very happy New Year!! Mr Greenhorn is back again! I have a question about zip and rar files. As some of you may remember, this is my first Mac, so I'm used to using the zip/rar programme on my old Windows O/S. Now I receive zip/rar files and can't open them. What is anyone's advice about downloading the zip/rar programme onto my Mac? Any particular pro's and con's? Any particular site to download from? Now my Mac has a compression programme included which converts files to zip files, but is that compatible to the actual zip/rar programme? And finally, where is the advantage to compressing files? Is it only for uploading or is there some benefit to having files 'compressed' on your actual laptop?

    Hi There
    Mac OS X has a built in Archive Utility which doesn't support .rar files. To uncompress rar files you will need a utility like RAR Expander or Stuffit Expander both are free. I suggest doing a search on MacUpdate (http://www.macupdate.com) or VersionTracker (http://www.versiontracker.com) to find a programme that you like.
    I personally don't see any advantage with keeping compressed files on your laptop (unless the archives being used often for emailing, uploading to websites etc). Compressing files does save disk space but if you get to the point where you need to compress your files to gain disk space then I suggest buying an external HD or a bigger internal HD.
    Hope this helps
    J.C

  • Need advice about coalesce and deallocate unused space

    Hi experts;
    Here looking for an advice about coalesce and deallocate unused space.
    I got this tablespace with 87% full, one of the table in that tablespace has 1,150,325 records.  I'm going to delete 500,000 records from that table, but to release the space used by those records I understand that I need to execute other procedure. I was reading about coalesce tablespace and deallocate unused space.
    I found that apparently, both process can help me to free space. If you want to share with me your comments, about  advantages or disadvantages about them, in order I can take the best solution?
    Thanks for your comments.
    Al

    Hi
    after deleted rows, the high water mark is still the same and so the size of the table. you need to bring down the water mark
    here is what you need to do to bring down the high water mark. We do this monthly for performance purpose.
    This is an EBS R12 system  but the procedures are the same for EBS database or non EBS database.
    After you purge or delete data in a table
    1) alter table APPLSYS.WF_ITEM_ATTRIBUTE_VALUES move; <-- this operation will invalidate all indexes attache to the table
    2)select owner, index_name, status from dba_indexes  -- list all invalid object for user APPLSYS
    where table_owner = upper('APPLSYS')
    and
    status NOT IN ('VALID','N/A');
    3)spool idxrebuild.sql --generate script to rebuild indexes.
    select 'alter index ' ||owner||'.'||index_name ||' rebuild online;'  from dba_indexes
    where table_owner = upper('APPLSYS')
    and
    status <> 'VALID';
    4) run idxrebuild.sql   -- to rebuild indexes.  -- at this point if you check spaces on the table, it is still the same, you need to run #5
    5)exec fnd_stats.gather_schema_stats ('APPLSYS');  --fnd_stat is for EBS system you can replace with the database equivalent command.
    use this statement to count the block before and after the operation to see the different.
    select DISTINCT(SEGMENT_NAME), count(blocks) "Total Block" from dba_extents
    where
    owner IN ('APPLSYS')
    AND segment_name = 'WF_ITEM_ATTRIBUTE_VALUES'
    Hope this help.

  • Need advice about headphones and splitter for HP EliteBook

    Hello,
    I would like some advice about what headphones and headphones splitter I should use for an HP EliteBook. I am going on a plane trip with my kids, and I plan to get them both Leapfrog headphones. However, I need a headphone splitter so that they can both watch a movie on the same computer.
    Does anyone have any suggestions for a splitter for an HP EliteBook? I tried Amazon but couldnt find anything.
    Thanks
    This question was solved.
    View Solution.

    Hi,
    The following one is for more than 2:
        http://www.officeworks.com.au/shop/officeworks/belkin-rockstar-headphone-splitter-bef8z274
    and the following one is from Amazon:
        http://www.amazon.com/Belkin-Speaker-and-Headphone-Splitter/dp/B00009WQSR
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need advice about transfering files

    Hello. I just got a new mac through an education deal at school. I hate this process of transferring files from one computer to the next but have never done it from one Mac to another before so thought it would be pretty smooth. Im new to the whole Migration Assistant and so need some advice about what to do next.
    I tried using migration assistance upon first turning on my new mac but was using wireless and it just wasnt working. My computer kept saying my new mac wasnt responding and I kept having to select ok or cancel every minute and with 15 hours to go, i thought f^*# it. So I decided to just start the computer up and manually transfer files. Then I found an ethernet cable, turned file sharing on and am using my public folder to transfer but its turning into The Most Tedious task and things arent transferring properly (like certain folders arent copying contents, just the folder itself).
    Now Im wishing I could have used migration assistant from the start but what can you do. I cant just re-install the mac os software and try again because before we got our new macs they installed some programs for us, like Logic, and I dont really wanna mess with that.
    Whats my best option at this stage? Ive transferred about a gig of pictures and documents over so far (and I think my old hard drive is about 60 gig full) but theres a bunch of other little things like iphoto, imovie, garageband, stickies, as well as big folders of music (and itunes - playlists etc) that I wanna make sure get copied in entirety. Will migration assistant handle that? Is it best to delete the stuff Ive transferred so far and let it start fresh? What would you do?
    Sorry my post is so long
    Message was edited by: girrrl

    Also, now that I have an ethernet cable, if I go ahead and use migration assistant to transfer the account from my old computer, will Logic only be available through the new account I have set up on my new computer? Would I have to log out of one account and into the other and back and forth to access the different files/programs? Any help would be much appreciated

Maybe you are looking for