"Your airport device does not have a valid IP address"

Hello,
Hoping someone can be kind enough to help here, please let me know if I haven't provided enough details or in the wrong format as I'm not hugely technical.
I have recently bought an Airport Express to connect to my existing Wi-Fi network. I have a Netgear DG834G v4 router-modem-base-station-thing and there are two computers running Windows 7 that connect to this.
I set up the connection via the Airport Utility and updated the firmware to 7.5.2 and everything worked beautifully for the first ten days or so. All the Airport Express was doing was linking my stereo to itunes and playing music.
One morning though the orange light was flashing on the Airport Express and when I opened up the Airport Utility I got the message in the title. I have tried re-setting via the Airport Utility and pressing the button on the unit itself, but all to no avail, the same error comes up when I have re-set the equipment from the default. Can anyone point me in the right direction to get things running smoothly again please?
Lastly, as far as I am aware I can't use the airport express as a bridge for my Netgear router (as this only works for extending the range of an apple product) but please let me know if I'm wrong!
Many thanks in advance!

An update for anyone who may have similar problems as this is now resolved for me. Largely by accident I found out the problem was actually with my main router as opposed to the Airport Express unit.
Can't explain why but unplugging the Netgear router from the power supply in the wall for five minutes or so (to do the vacuuming in this case!) and then plugging it back in and powering back up (this took some time (15 minutes or so) appeared to allow the router to sort what needed which IP address.
This happened about 2-3 weeks ago and everything has been running fine since. Please note that I did try and "soft" re-set the router by telling it to re-set via the settings you can alter using a web browser but this had no effect at the time.

Similar Messages

  • Airport Extreme does not have a valid IP address

    My Airport Extreme Base Station 802.11N (AEBS) no longer has an internet connection and I cannot share internet or even access the internet via an ethernet cable from the AEBS to my iMac unless in Bridge mode. I have a 2.6 Ghz Intel Core iMac running OS X 10.5.6. I also have an Airport Express (802.11b/g) currently offline.
    When I plug my ethernet cable directly into the iMac I've got a fast and reliable internet connection. I have also done 2 hard resets on my AEBS without any success. I have ensured that my cables are properly plugged in and had it checked by another person.
    I do not have a specific IP address from my Internet Service Provider (ISP). I have contacted my ISP and have confirmed that there is nothing wrong on their end. I had an internet connection previously with "Using DHCP". Now when I select it blanks out the IP address box. I referred to my last working saved Airport setting and my AEBS still does not have an internet connection.
    I'm not sure what else I can do. Any help would be appreciated. Thanks in advance.
    Byron

    Hello,
    I'm having a similar problem. Saturday morning my Comcast Internet was gone. I went through all the steps to troubleshoot (powering everything down, checking connections, powering back up from outside, connecting directly to the cable modem via Ethernet, etc.). I only got a valid IP address for a brief few minutes when directly connected. Comcast swapped out my modem, but same issue. Then Sunday they said known problem in area. This morning I got on the line with a level 2 tech. We went through just about everything again, and I can connect very reliably via direct Ethernet connect to modem. If I unplug the ethernet and give it a minute to recognize its gone, ip address goes blank. When I plug it back in, it gets a valid IP address and Internet connects almost instantaneously.
    However, with my AEBS (n) I can't get a valid IP address. I use the exact same Ethernet cable from the cable modem the AEBS Internet WAN port. But it gives itself a self-assigned IP of 169.254... I've gone through the cycles of powering down and back up a couple of times, checked my connections several times, and reset my AEBS to factory defaults. Still no dice. Internet is set to DHCP and to share a public IP address (in the default 10.0.1.x ranges). Has my AEBS effectively lost its ability to get a valid IP from the modem? Is it dead? Anything you can think of that I can try?

  • Internet Connection - Your Apple wireless device does not have a valid IP.

    I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
    Internet Connection - Your Apple wireless device does not have a valid IP.
    The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
    After a lot of research, a friend indicated the solution in my case.
    You have to really reset the cable modem to convince it to start giving out IPs again.
    To do this:
    1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
    2. Unplug your cable modem
    3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
    4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
    5. Plug in your TimeCapsule
    Everything should now work and you can restart your AirPort set-up on your Mac.
    Good luck!

    My ISP is AOL.  The service is DSL via a broadband modem.  Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem.  When I hook the DSL modem directly to my iMac I can connect to the internet without any issues. 
    I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step.  That is where this issue first presented itself.

  • Time Capsule does not have a valid IP address

    We have 2 computers in our home office: a Win 7 desktop and an iMac.
    We have cable internet; the cable modem (Toshiba PCX2500) is plugged (ethernet) directly into the Time Capsule, which we use as our router to the two computers (also by ethernet).
    The wireless functionality of the Time Capsule has been turned off.
    We’ve been using the Time Capsule like this for the past 18 months (we purchased it new) without any problems.
    Last month, however, we began losing our internet connection regularly (about 3-4 times per day) and getting the dreaded golden flashing light (as opposed to solid green) along with the error (paraphrasing here) “the Apple Wi-Fi does not have a valid IP address.”
    We hadn’t made any changes in our hardware; it just showed up out of the blue.
    After contacting our ISP, we were advised to unplug the cable modem for about 30 seconds, then plug it back it. Most of the time this worked; if not, we had to “cycle” the Time Capsule as well.
    We’re now having to do this about 4-5 times per day.
    Sometimes the Time Capsule’s status light is still green when we have no internet connection. Out of the blue the connection just isn’t there.
    We “cycle” the cable modem and we’re back in business every time.
    Additionally, when we actually do have an internet connection, the speeds fluctuate wildly. We’re paying for 15 Mb service; as of the past 4-5 weeks, we get 15Mb about 50% of the time. The other 50% it generally averages between 3Mb and 6Mb.
    The ISP’s tech support (we’ve contacted them no less than once a week since this started) swears up and down that it’s the router, not their signal or their equipment in any way. They deny all culpability.
    We even had the ISP’s repair people come out on an occasion about 10 days ago to test the signal strength; they reported no problems. “You’ve got great signal strength to your home…” were the exact words.
    Similarly, after calling Apple on 2-3 occasions, we get the exact same response: “It’s not the Time Capsule router, it’s your ISP.”
    The last Apple technician we spoke with (yesterday) said, “I’ve been doing wireless/Internet tech support for years and I can guarantee you – 100% -- that it’s a ‘DNS caching’ issue. I’m 100% positive that’s your problem, and I’m also 100% positive it’s your ISP’s fault.”
    After contacting the ISP again we were informed that they don’t have any such caching problems.
    We’re tired and frustrated! Please help.

    I would suggest running the network via a pc for the day.. pick either your Mac or win7 pc.. you will need to do a bit of fiddling.. even better would be to just borrow a router. Or buy one on a 7day return .. !! Beg borrow.. don't steal. Just get a router other than TC. it won't take long to determine if the TC is the issue.
    IMO at 18months you are suffering failure of the TC power supply. early days but it is showing signs of delinquency. And will get worse. But another router will show it up.. if the PC has dual ethernet cards you can run ICS.. or same sort of thing on the imac to the wireless .. ie the PC or Mac becomes the router with direct connection to the cable modem. Then share internet from there.
    Once you do that for a day or two, you will quickly be able to track down if the issue is cable service/modem or the TC as router.

  • "Your device does NOT have a camera"

    What's up with that??? My previous iPhone was just replaced with a refurbished one. It's a 3G and the camera is indeed there but since I had no camera icon on any of my screens so I installed CamZoom. When that app is launched, I get a "Your device does NOT have a camera" message. Have rebooted and restored. Any ideas or do I have to make my third trip to an Apple store? (that's getting very, very old)

    The native Camera app cannot be deleted. But, there are two possibilities:
    1) It's turned off in Settings > General > Restrictions. If so, enter your passcode and toggle it back ON.
    2) You have an Exchange account on the phone. The Exchange server can be set to disable the camera, so if that's the case you'd need to delete the Exchange account or convince your IT department to remove the restriction.

  • HT1539 How do you redeem Digital Downloads if your device does not have a DVD drive?

    How do you redeem Digital Downloads if your device does not have a DVD drive?

    If the redemption comes only on a disk, then you will have to get access to a DVD drive, either by borrowing or purchasing one, or by using the Remote Disk feature if you have another computer available that does have a DVD drive.
    Regards.

  • Pages document "could not be read" bc. it "does not have a valid format"

    The document in question was properly saved and Pages was not open when my computer hung as it was shutting down. MS Word would not quit or force-quit and I had to hard restart the computer. When I later tried to open this Pages document, which I had been working on before Word froze, Page would not open it and responded with the error message: "This document "document_name.pages" could not be read. This document does not have a valid format." When I looked at the document in question I noticed that its file size was 0KB. I have no idea why this happened, but I suppose it has to do with my computer not shutting down properly and perhaps with Word freezing. If I repair my drive permission, re-index it, anything, will it help? Just a note on the status of this machine: spotlight stopped working earlier this morning and I was waiting to finish this document before repairing disk permissions and trying to fix that issue with Spotlight.
    In the meantime I have tried various fixes. First I tried to change the file ending to .zip, unpack it and open it. Then the same, but this time I tried to view package contents. It doesn't show up in the contextual menu as even having a package to show the contents of. The file is effectively empty, but I don't know where the contents went! The funny thing is that the MS Word doc was recovered automatically. Is it possible that Pages doesn't have an auto-recovery mechanism?
    I need this file urgently, or at least the text in it. It is the bibliography of an important paper due tomorrow at 5 pm.Any advice or suggestions would be greatly appreciated.
    BTW, I have used a file-recovery program in the past. It is called "Stellar Phoenix" and it worked wonderfully to find a Word doc that I accidentally deleted. It can't find .pages document though. In order to do so, I would need to tell the program what the average file size is, as well as the header information as follows. "Header (in hexadecimal)" "At Offset (in decimal)". I have no idea what this means, but if I could insert it, perhaps it could find the lost data. Should I have it search for .pages, .zip, .xml? I'm at a loss, but I know that it doesn't recognize .pages. In the meantime, I sent a support email to them and will see what happens.
    Thank you for your help.
    David

    I can't respond before.
    When the system say that your file size is 0KB, it means that nothing was saved. Only a file descripto exists.
    So, there is nothing to recover.
    Given the time the system crashed, you may have :
    (1) a simple descriptor with nothing written
    (2) a folder with every or only some of the required files.
    In this case, Phoenix is useless : it's unable to revive a folder.
    (3) a flatfile (a compressed version of the folder named above). It's only this kind of file which Phoenix may revive.
    With a bit of luck, Phoenix would be able to revive the index.xml file which was in the original folder created in the temporary folder.
    This file starts with :
    <?xml version="1.0"?><sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
    or
    <?xml version="1.0"?>
    <sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
    The minimal size for a Pages index.xml file is : 520038 bytes.
    If you retrieve the index.xml file, we may try to rebuild an usable package.
    Ask the recovery tool to transfer the recovered file on an other media.
    If the document embedded pictures, the index will give their path and their size which may be useful to recover them.
    Yvan KOENIG (VALLAURIS, France) lundi 1 novembre 2010 10:27:44

  • HT204408 When trying to log into face time I get the registering device does not have appropriate credentials, I have OSX 10.8.4 on my Mac Pro. I can log in using my IPAD

    When trying to log into face time I get the registering device does not have appropriate credentials after I sign in, I have OSX 10.8.4 on my Mac Pro. I can log into face time without a problem using my IPAD.>

    Please take each of the following steps that you haven't already tried, until the issue is reolved. If there's no resolution after Step 3, post your results.
    Step 1
    Sign out of iMessage in the Accounts tab of the preferences dialog, then sign back in.
    Step 2
    Log out of your user account and log back in.
    Step 3
    Boot in safe mode and test, then reboot as usual and test again.
    Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

  • Plugin does not have a valid identifier

    Hey guys,
    when i´m starting my eclipse plugin in eclipse, it works fine. but when i´m exporting it, and want to start it, there rise up some errors:
    !ENTRY org.eclipse.update.configurator 4 0 2009-04-21 12:10:52.325
    !MESSAGE Plugin does not have a valid identifier: plugins/com.ibm.de.hermes_1.0.0.jar
    !ENTRY org.eclipse.update.configurator 4 0 2009-04-21 12:10:52.326
    !MESSAGE Plugin does not have a valid version: plugins/com.ibm.de.hermes_1.0.0.jar
    !ENTRY org.eclipse.osgi 4 0 2009-04-21 12:10:52.801
    !MESSAGE Application error
    !STACK 1
    java.lang.RuntimeException: Application "com.ibm.de.hermes.application" could not be found in the registry. The applications available are: org.eclipse.equinox.app.error
    [...]Has anybody an idea how to solve this problem? The identifier is correct in the plugin.xml and the *.product. also the identifier to the com.ibm.de.hermes.application is correct.
    I really don´t know how to fix it.... :(
    thank´s for your help!!!
    regards, iTob
    Edited by: -iTob- on Apr 21, 2009 4:20 AM
    Edited by: -iTob- on Apr 21, 2009 6:11 AM

    Sorry no expert again but sounds like something isnt right in your
    plugin.xml. Have you compared it with the old one.

  • Unable to load the package as XML because of package does not have a valid XML format

    I have SSIS package and I would like to let SQL Server Agent Job to run it.
    However I get Unable to load the package as XML because of package does not have a valid XML format
    What could be wrong?
    Kenny_I

    Hi Kenny,
    What's the version of your SSIS? Please refer to the following methods to solve this issue:
    Hard code the path of SQL Server 2008's DTEXEC while calling the SSIS package as shown below:
    C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEXEC.exe /F "D:\MyFolder\MyPackage.dtsx"
    Rename the old exe in the 2005 path to a different name (Example:- C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTEXEC_Old.exe)
    Go to PATH environmental variable and edit it in such a way that "C:\Program Files\Microsoft SQL Server\100\DTS\Binn" path appears well before the "C:\Program Files\Microsoft SQL Server\90\DTS\Binn" path.
    For more detail information, please refer to the blog below:
    Failed to open package file due to error 0x80070020. The process cannot access the file because it is being used by another process. This happens when loading a package and the file cannot be opened or loaded correctly into the XML document:
    http://blogs.msdn.com/b/ramoji/archive/2009/08/28/failed-to-open-package-file-due-to-error-0x80070020-the-process-cannot-access-the-file-because-it-is-being-used-by-another-process-this-happens-when-loading-a-package-and-the-file-cannot-be-opened-or-loaded-correctly-into-the.aspx
    A similar thread about this topic for your reference:
    http://social.technet.microsoft.com/Forums/en-US/b2987df5-8c9b-4797-bdce-b9ec308731f6/i-am-getting-error-when-running-ssis-package-using-sql-server-agent-error-description-is-unable-to?forum=sqlintegrationservices
    If you have any feedback on our support, please click
    here.
    Elvis Long
    TechNet Community Support

  • Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured

    Today I tried to configure JAVA APM on a CentOS 6.4 server with tomcat6 installed through the normal RPM package. Adding this server to SCOM was no problem and it shows itself as a 'Deep Monitored Configuration'. The last part of enabling
    JAVA APM fails. I have followed the following process:
    1. Imported the JAVA APM MP's
    2. Extracted the JAVA APM Files
    3. Copied those files to my CentOS server
    4. Added the JAVA_OPTS to my tomcat configuration file
    5. Restarted Tomcat
    When I look for the log file which needs to be created through the installation of the APM agent it cannot be find. When I look into my Catalina.out file I see the following errors:
    Mar 05, 2014 7:05:16 PM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger error
    SEVERE: Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured
    com.microsoft.ManagementServices.APMAgent.Exception.ApmException: SEAgent.config.xml does not have a valid event sender configured
            at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
            at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
            at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
            at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
            at java.lang.reflect.Method.invoke(Method.java:601)
            at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
            at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
    Caused by: java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
            at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
            at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
            ... 15 more
    Caused by: com.microsoft.ManagementServices.APMAgent.Exception.ApmException: Error registering MBean: com.microsoft.ManagementServices.APMAgent:type=COUNTER
            at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.registerMetricMBeans(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
            at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
            at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
            at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
            at java.lang.reflect.Method.invoke(Method.java:601)
            at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
            at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
    Caused by: java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
            at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
            at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
            ... 15 more
    Caused by: com.microsoft.ManagementServices.APMAgent.Exception.ApmException: Error registering MBean: com.microsoft.ManagementServices.APMAgent:type=COUNTER
            at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.registerMetricMBeans(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
            ... 19 more
    Mar 05, 2014 7:05:16 PM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
    INFO: Java APM Agent loading failed (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
    java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
            at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
            at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
            at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
            at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
            at java.lang.reflect.Method.invoke(Method.java:601)
            at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
            at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
    Caused by: java.lang.InstantiationException: Monitor initialization failed: SEAgent.config.xml does not have a valid event sender configured
            at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
            ... 12 more
    Does anyone have seen this error before? Can someone help me with this one?
    Thnx,

    I'm running tomcat on a CentOS release 6.4 (Final) server. I installed Tomcat 6 through an RPM from the CentOS sources. I have installed Apache Tomcat/6.0.24 wit JVM version 1.7.0_09-icedtea-mockbuild_2013_01_16_18_52-b00, the JVM Vendor is Oracle Corporation.
    My tomcat configuration needs to be done in '/etc/tomcat6/tomcat6.conf'
    I installed the APM Agent in the path '/opt/apm/' with the rights  40755 (root/root). The files have the following rights:
    -rw-rw-r-- 1 root tomcat  32046 Mar  3 15:38 apm_facade.jar
    -rw-rw-r-- 1 root tomcat 244819 Mar  3 15:38 apm_monitor.jar
    -rw-rw-r-- 1 root tomcat  38110 Mar  3 15:38 apm_producers.jar
    -rw-rw-r-- 1 root tomcat 207006 Mar  3 15:38 asm-all-3.3.1.jar
    -rw-rw-r-- 1 root tomcat   4157 Mar  3 15:38 ASM_Third_Party_Notices.txt
    -rw-rw-r-- 1 root tomcat 241368 Mar  3 15:38 DispatcherStub.dll
    -rw-rw-r-- 1 root tomcat  36880 Mar  3 15:38 pmonitor.config.xml
    -rw-rw-r-- 1 root tomcat   2625 Mar  3 15:38 SEAgent.config.xml
    -rw-rw-r-- 1 root tomcat    830 Mar  5 15:19 Starter.properties
    The above rights are equal to the /etc/tomcat6 directory with the tomcat configuration files.
    In the tomcat6.conf I have added the following entries:
    #Microsoft SCOM APM
    JAVA_OPTS="${JAVA_OPTS} -Djava.library.path=/opt/apm"
    JAVA_OPTS="${JAVA_OPTS} -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar"
    When I look into the running tomcat process I see the following:
    tomcat   17401     1  0 Mar05 ?        00:00:39 /usr/lib/jvm/jre/bin/java -Djava.library.path=/opt/apm -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar
    -Djavax.sql.DataSource.Factory=org.apache.commons.dbcp.BasicDataSourceFactory -Djava.library.path=/opt/apm -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar -Djavax.sql.DataSource.Factory=org.apache.commons.dbcp.BasicDataSourceFactory
    -classpath :/usr/share/tomcat6/bin/bootstrap.jar:/usr/share/tomcat6/bin/tomcat-juli.jar:/usr/share/java/commons-daemon.jar -Dcatalina.base=/usr/share/tomcat6 -Dcatalina.home=/usr/share/tomcat6 -Djava.endorsed.dirs= -Djava.io.tmpdir=/var/cache/tomcat6/temp
    -Djava.util.logging.config.file=/usr/share/tomcat6/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager org.apache.catalina.startup.Bootstrap start
    My Starter.Properties looks like this:
    # Jars to load by inner classloader.
    # Use semicolons to separate the JAR entries
    ClassPath=apm_monitor.jar;asm-all-3.3.1.jar;apm_producers.jar
    # Path to pmonitor.config
    MonitorConfigFileName=pmonitor.config.xml
    # Path to SEAgent.config
    AgentConfigFileName=SEAgent.config.xml
    # Log file name
    # Example for full-path location:
    #                  LogFileName=c:\\tracelog\\apm-java-agent.log
    # Example for relative path (to agent jar files):
    #                  LogFileName=apm-java-agent.log
    LogFileName=apm-java-agent.log
    # Log level (SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST)
    # A level of FINER or FINEST may expose Personally identifiable
    # information (PII) in the log file.  The levels below INFO are
    # intended for debugging and diagnostic use only.
    LogLevel=FINEST
    The 'apm-java-agent.log' is not created on the system. The only logging is done in the catalina.out. When restarting tomcat I see the following entries in te log file:
    INFO: Initializing Java APM Agent (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
    Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
    INFO: Java APM Agent loading succeeded (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
    Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
    INFO: Initializing Java APM Agent (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
    Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger warning
    WARNING: Failed registering the COUNTER MBean
    Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger error
    SEVERE: Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured
    Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
    INFO: Java APM Agent loading failed (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
    Hope this gives your some more background around my problem, I double checked the permissions..

  • I'm trying to set up my Facetime but I'm getting a message that says my registering device does not have appropriate credentials

    I'm trying to set up my Facetime on my laptop but I'm getting an error message that says my registering device does not have appropriate credentials. How can I fix this?

    katharina,
    The specific circuit board I was talking about is the "Logic Board" which should have the serial number of your computer embeded electronnicaly.  Sometimes the technicians who replace this board do not bother to enter the computer's serial number into it after making the repair/replacement.  Probably because they don't think that it is important.  The only way you can have this done is to bring it back to the shop where it was repaired, and have them do it. On some Macs you can check the electronic serial number by clicking on the Apple logo on the top left hand corner of the screen, then clicking on "about this mac" then clicking on "more info" button on the window which will appear.  If you can't see any serial number, then your replacement board was not serialized.

  • ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)

    Dear,
    i 've got this error when i tried to upload my book using iTunes Producer and i don't know how to solve it
    if any one know the solving please inform me
    ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)

    Hello ModernGuide
    For specific issues with uploading your book and dealing currency, you will want to contact Apple Directly and the article below will have contact information for phone support or support through email.
    Authors & Book Publishers: Frequently Asked Questions
    http://www.apple.com/itunes/content-providers/book-faq.html
    Apple provides support to iBooks Store authors and publishers via email and phone:
    Send an email to [email protected]
    If you have an Apple ID enabled for iTunes Connect, you can contact the iBooks Publisher Support team by phone, Monday through Friday from 7 a.m. to 5 p.m. (PT). Local phone support is available in English in the countries listed below
    Austria, Australia, Denmark, France, Germany, Italy, Netherlands, Norway, Spain, Sweden, U.K., U.S.
    Regards,
    -Norm G.

  • [Solved] libpng12-1.2.44-1-i686 does not have a valid architecture

    I am trying to install google-talkplugin from AUR. I have Arch Linux 64-bit installed. I have gone into /etc/pacman.conf and enabled the multilib repo but am running into a single dependency issue.
    AUR Link: http://aur.archlinux.org/packages.php?ID=40056
    Part of pacman.conf
    # If you want to run 32 bit applications on your x86_64 system,
    # enable the multilib repositories as required here.
    #[multilib-testing]
    #Include = /etc/pacman.d/mirrorlist
    [multilib]
    Include = /etc/pacman.d/mirrorlist
    However the only dependency I am missing is  libpng12.
    Output of makepkg
    ==> Making package: google-talkplugin 2.1.7.0-1 (Tue Jul 12 20:37:21 CDT 2011)
    ==> Checking runtime dependencies...
    ==> Missing Dependencies:
    -> libpng12>=1.2.13
    ==> Checking buildtime dependencies...
    ==> ERROR: Could not resolve all dependencies.
    When I try and install it I get the following message.
    pacman -S libpng12
    error: failed to prepare transaction (package architecture is not valid)
    :: package libpng12-1.2.44-1-i686 does not have a valid architecture
    Am I missing something here? Is there any way to work around this? Any help would be greatly apprceciated. Thanks!
    Last edited by thebrok2 (2011-07-13 03:09:16)

    http://www.archlinux.org/packages/?sort … =&limit=50
    libpng12 is not in the repos. You're probably using some unofficial user repositories that only have the 32-bit version.
    Install it from AUR http://aur.archlinux.org/packages.php?ID=33795 or
    [archstuff]
    # AUR's most voted packages
    Server = http://archstuff.vs169092.vserver.de/$arch
    (do you want the lib32-* version?)
    Last edited by karol (2011-07-13 01:54:04)

  • When I try to log in into my facetime it tells me that the registering device does not have appropriate credentials. how do I fix it?

    When I try to log in into my facetime it tells me tha the registering device does not have apropiate credentials. how do I fix it?

    Check for the latest updates for your OS,  you'll get that error message if you do not have the latest security updates for your operating system.

Maybe you are looking for

  • Login on one machine at a time

    Hey, We are in the middle of setting up a HomeSync solution in our office. My question is, is it possible to ensure that a user is only logged in to one computer at a time. If a user is already logged in, can it prevent it from logging into another m

  • Customized orion-application.xml

    Configuration: Jdeveloper 9i Release 2 Production Version I have a customized orion-application.xml file under <project-directory>/src/META-INF directory. I would like to package this along with my application. How do I include it in my Deployment Pr

  • Need logic for Group By function

    Hi, I written this query for the requirement, but when the column column 'exposure_code' included in the group by function, it's increasing the count's of records, becuase of different combination of values. (its having value like 'DRAWN', 'UNDRAWN',

  • TS3920 Date and Time display

    The smaller time in the header of my iPad4 is accurate, but the larger date and time in the background at the top is wrong. I think it may be the date I bought the iPad. The calendar app is correct as well as the date and time in settings. How do I c

  • When will the VS 2005 PDK be available?

    Hi, I was wondering, when will the PDK version for VS 2005 be available? Thanks