"Your AutoCorrect file, MSO2057.acl, could not be saved. ..." when attaching a document

Hi,
I'm using Adobe Reader v10.
When I try to attach a document (txt, doc, or whatever), I get the message: "Your AutoCorrect file, MSO2057.acl, could not be saved. The file may be read only, or you may not have permission to modify the file."
Sometimes Acrobat freezes and sometimes I can continue to use it after I've attached the file. I've verified this error on a few pc's.
Winword.exe is *always launched and I have to kill the process via the Task Manager.
1.Why is acrobat trying to access MS proofing tools and how can I stop it from doing so?
Thanks
R.

You obviously have Acrobat Pro and not Adobe Reader. You probably need to adjust you security settings in the attachments settings.
You also probably are not the person who set these or maybe the default doesn't allow those types of files. Either way there probably needs to be an adjustment made. You or the Admin who set up security in your deployment package will need to make the adjustment to the deployment package. Here is the reference they need to read:
http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/Attachments.html?zoom_hi ghlight=attachments#Attachments

Similar Messages

HT204150 iCloud contacts, they won't save. I get a message stating that "Your changes to this contact could not be saved because of server error". What can I do?

Some of my edits of contacts in the iCloud contacts will not save. Instead, I get the message that "Your changes to this contact could not be saved because of a server error". Other, similar, edits are saving and synching to other Apple devices.
Thanks for help

Jeffeighmy - I had this same problem last week. I think it is an iCould issue. It resolved itself. Just frustrating. I had reinstalled iCloud Control Panel and it would not let me save contacts or calendars. Then it just happened after a couple of days of trying. My contacts on my iphone are now duplicated, not in Outlook. Then when I delete one on the iphone it deletes it up through icloud and my pc so I loose that contact. Go figure.
Mike

Error message - "The iTunes Library file is full could not be saved" - Help

Hi folks.
I looked for current / recent chatter on this iss before creating this topic. Didn't see anything that addressed this issued recently. If I missed it, sorry, if not, here you go!
I got an error message last night while using iTunes. It just popped up during use, not while using. The error message read "The iTunes Library File could not be saved." Now my hard drive is DEFINITELY not full. I have hundreds of gigs of unused space. This appears to be an issue strictly related to my library.xml file. Stupidly, I clicked the don't show me this again and closed the message. My concern now is that I'll rip new content that won't end up in my iTunes library even though it's on my hard drive, thus that content will not be findable by iTunes.
I don't want to just rebuild the library from scratch as I have fixed tons of errors in how iTunes classifies my music over the years and all that work would be lost.
Any ideas on how to get past this glitch?
I noticed this problem also cropped up circa the original iPhone launch. I had that phone and did not experience this prob, and I just upgraded to the 3G four days ago. It makes no sense to me that the phone is causing this, but perhaps the upgrade to the iTunes version 7.7 (necessary to use the iPhone with my Windows computer) is the cause of the prob.
I did erase a bunch of videos and unsubscribed to several video casts. That was one recommended solution way back when.
My concern though is that since I chose the don't show me this error message again option, I won't know whether the problem persists or not.
Oh the humanity...

I have seen this a few times, usually when other 3rd-party applications are using itunes. Such as, lastfm & the Tivo remote music player.
And, I've also seen it when I was copying a bunch of digital photos to the exHD in the background while playing music and the song changed. iTunes saves the playcount in the ITL file when the song ends.
You might check this Microsoft article about "Enable write caching on the disk". I haven't seen that iTunes error since I turned mine back on for the exHD. The Tivo "delayed write failed" errors are back, but that's a different problem...
http://support.microsoft.com/default.aspx?scid=kb;EN-US;330174
Anyway, long story short, it gets saved OK later and I make frequent backups of that ITL file.

I am using Windows XP SP3, I have problem with file download while resuming downlod giving error "file...could not be saved, because the source file could not be read." Please help me

I am using Fire Fox 5 beta version. After pausing the long file download, when I press the Resume download button the above message appear each time asking "Contact to Administrator". This problem was not with Fire Fox version 3 and above. Please Help Immediately. Thanks in advance...

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
* http://kb.mozillazine.org/Unable_to_save_or_download_files

Printer setting could not be saved operation could not be completed error

printer setting could not be saved operation could not be completed error 0*000006cc

Hello printer setting could not be saved,
When you do receive this error message?
Have you made any changes before this issue?
Please take the following steps for troubleshooting:
1. Update the printer driver from the manufacturer website.
2. Run the printer troubleshooter.
http://windows.microsoft.com/en-us/windows7/open-the-printer-troubleshooter
3. Temporarily block the firewall and check if this issue still exist.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
I can login fine via this address.
http://[Server Address]:[Port Number]/ReaderExtensions
And I can apply the extension successfully, but when I attempt to download I receive the error above.
Application Alert" The file could not be saved. Are you sure you want to lose your results?

Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
Upgrade or downgrade it accordingly.
Thanks,
Wasil

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox

Error message 'Could not save to path /Users/yogasail/Documents/' appeared and cannot save files?

I have an iMac 21.5 running OS X 10.9.4:Processor 2.7 GHz Intel Core i5:Memory 8 GB 1600 MHz DDR3. I have suddenly got this message every time I try to save a file -'Could not save to path /Users/yogasail/Documents/Emma/xxxx.rtf. Choose a different path.' Unable to save anything now?? Can anybody help?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error: File just captured could not be read and was deleted after capture.

I was just recording an extremely important interview. I have recorded literally 10.000 recordings before with the same setup, every day, over a period of some three years now. I'm recorging DV PAL through SDI input on a AJA KONA LS card.
It seemed to be going well last night while recording but as soon as I pressed 'Esc' to end the capture I got an error message saying (not exactly in these words) : Error: The file just captured could not be read.
The file couldn't be found anywhere on the HD or in the trash. Usually when something goes wrong during capture, you can find the file in the capture folder named 'filename-av'. Not this time, I have never seen this error message before.
The person being interviewed was absolutely furious and said he would not do the interview again. So I'm up against the wall here, and need to recover the files.
What's more, the problem still persists. When I try capturing again, as soon as I stop the same error occurs. So now my FCP is not capturing anymore
I tried running Data Rescue 3.1 and found the recording in deleted files, but:
1. the recording is in several parts (not sure if it's all there, but probably most of it)
2. Data Rescue 3 interprets the files as .dv files, as opposed to .mov files as all my other recorded material.
3. THERE IS NO AUDIO IN THE .DV FILES, which pretty much nullifies the file recovery altogether.
I tried googling this error, but it did not help much:
1. None of the people were capturing the same way I do (most were capturing from tape, none straight through KONA SDI input)
2. There was no solution to prevent the error.
3. No solution to recover the files either.
I must say, this experience really taught me the essence of Murphy's law: 'Anything that can go wrong, will go wrong at the worst possible moment'
Any suggestions as to the reasons for this?
Any suggestions as to how the files can be recovered?

Good news!
I beleive I have found the cause and solution. At least now I am able to reproduce the problem at will and therefore, hopefully prevent it.
I discovered that there is nothing wrong with my AJA KONA setup, as I was able to capture with both QuickTime movie capture and Adobe Premier just fine. But every time I try capturing in FCP I get unreadable capture files (since 2 days ago).
Trying all possible capture settings, capture presets or easy setups did nothing. (although capturing thru Firewire still works every time).
I was about to give up when I noticed that where I usually have my video scopes window running, for convenience sake, under it the Voiceover utility was running.
So here is the deal: Usually when you try and capture with the Voiceover utility running, you can't. FCP wont allow you to capture, it will return an error message saying: 'Log and capture can not be opened while Voice Over is running. Please close Voice Over and try again.' As it turns out, this warning is probably for a good reason.
BUT...
If you shut down FCP with Voice Over running and start it up again THEN you CAN run Log and Capture at the same time... everything looks OK, until you stop the recordin, then you get an error message saying your recording is screwed.
I tried this over and over again, every time it behaves the same way. Shutting down with VO util>starting up again>recordings get screwed .. close VO utility>back to normal operation.
I'm not sure if it was the VO utility the last time this happened (few weeks back), but it might very well be. I might not have noticed that the VO utility was running as it was hidden behind the videoscopes and there are no warnings when running Log and Capture if you start up FCP with VO utility still running.
My educated guess to what is going on is that the VO utility is taking up priority over the sound inputs and by doing so making the audio of the capture unreadable. This theory is supported by the fact that when my data recovering experts found the recordings on the HD, there was no audio on the files, but the video was intact.
The only reason setting up the AJA drivers helped in the past was probably because that flushed the FCP settings and in doing so closed the VO utility window. How very ironic
Hope this helps someone out there. And I hope Apple find a way to prevent this from happening.
cheers!
Vidar F.

How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " when file not downloaded

How I can diable in firefox dialog box "download error could not be saved, because the source file could not be read. " standart download manager when file not downloaded

It is possible that anti-virus software is corrupting downloaded files or is interfering otherwise.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
You can try to set the browser.download.manager.scanWhenDone pref on the <b>about:config</b> page to false.
*http://kb.mozillazine.org/about:config

"ABC could not be saved, because the source file could not be read" error when downloading

Almost every time I download a file, the download gets to the end and then I get this error "<filename> could not be saved, because the source file could not be read", and then the download fails.
I checked my addons and they are not the problem. This doesn't happen when I try another Firefox profile. I tried several solutions offered in "http://kb.mozillazine.org/Unable_to_save_or_download_files" but they didn't help. It's not my antivirus.
I hate to start another profile because I have my current one just the way I like it.
Please help!

You can check the file attributes of all the files in the Firefox Profile Folder to make sure that you have write permission.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

File won't save - error message is: "...could not be saved. No such file or directory." (?)

File will not save or 'save as' - error message is: "...could not be saved. No such file or directory." File has been save previously. Is this a preference issue or perhaps a permissions issue?

I repeat that everything dedicated to the save process is different.
The app contain two sets of code, one used under 10.6.8, an other one used under Lion.
Here are the two states of the File Menu under Lion.
Compare them to what you get under 10.6.8.
State #1 when the frontmost document was never saved :
The menu item Save is replaced by Save…
No longer Save As… menu item replaced by Duplicate
New item : Revert Document… (disabled)
State #2 : when the frontmost document was saved at least once.
Save… is replaced by Save a Version
Duplicate is always here
Revert Document… is now enabled.
There is an important change in the title bar too.
When a file was edited we get the word Edited on the right of the doc's name. This word is the title of a local menu :
Triggering Browe All Versions give us what I already posted in the thread :
https://discussions.apple.com/message/16523021
Yvan KOENIG (VALLAURIS, France) jeudi 27 octobre 2011 11:49:49
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

HP scanning error: "An error has occurred saving the file because it could not be written to..

HP scanning error: “An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.” Dr. Google finds others with this problem. Some claim that this is caused by an upgrade of Apple OS10 (which I did do). One claims that HP has a "patch" for this problem. If I try to quit HP scan, it won't quit and freezes my computer. Here's the odd thing. I have no problem scanning in a colored page from Scientific American either before or after this error (after rebooting each time), but simple black and white documents started just today to give the error message above.

Thank you for the link however if I understood all of the instructions I would still be reluctant to try this on my own especially from a third unknown party where some of the information may be wrong and/or lost in translation. (Google translation at the end of this comment). The instructions say to uninstall the software. So if I uninstall the original HP software am I using the original disk to reinstall and then personalize again?What about all of the updates since I originally installed the software? I found the Disk Utility but what is "gatekeeper"And I am using OS X 10.9.1 that is current because I downloaded the latest upgrade. How would I reinstall it?And at what point do I go to the URL for the software drivers and the patch? This is just not practical for someone who is not proficient in troubleshooting applications.I switched to Apple because I don't want to have to go through this kind of process, take my time to fix the application and potentially mess up my system . WHy should I have to try to figure out how to retrieve the normal function in this case, of my All-In-One. If it is so simple why can't HP develop the fix and make it available? Unfortunately right now I have to find an alternative to scan some important business documents that are due today. Since I am using an older printer by technology standards even though it is working fine I may be looking for a replacement and HP may no longer be at the top of my list given that the problem appears to affect other HP models. No need to answer my questions, I'm not going to try this fix based on these instructions. Please HP provide a fix for this problem with the scanner and MAC OS X 10.9.1 compatibility! Translation of the information on the suggested link: We hereby send you a guide that should help you in solving the problem .Please carry the following: 1 Please uninstall the software again .Goto -> Programs - > Hewlett -Packard - > HP Uninstaller 2 Please repair permissions on your Mac .Go -> Utilities -> Disk Utility - > Repair Disk Permissions . 3 Please disable ' gatekeeper ' on your Mac . 4 Reinstall the full software for MAC 10.6 and patch for 10.7 / 10.8 / 10.9. HP Scanjet Software and Drivers for Mac OS X v10.6 features :http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dsj_78355_5 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
Scanjet software patch to Use OS X 10.6 Software and Driver on OS X:http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dcs_97791_1 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

"Your AutoCorrect file, MSO2057.acl, could not be saved. ..." when attaching a document

Similar Messages

Maybe you are looking for