Your call cannot be connected. Please check your phone settings.
Though my load balance is still sufficient enough to make outgoing phone calls, a recording which says "Your call cannot be connected. Please check your phone settings." keeps on playing.
Any idea on how to resolve this?
Did you verify with T-Mobile before you left that you had international dialing enabled?
Similar Messages
-
Your call cannot be connected pls. check your phone settings help plsss
your call cannot be connected pls. check your phone settings help plsss
mhayo wrote:
your call cannot be connected pls. check your phone settings help plsss
Check the Telephone Number you are calling...
Contact your Carrier.
Also...
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I am using Oracle 10g server for database and VB Dot Net application for my Office. These were worked properly in Windows Xp all versions but in windows 7 not working. I installed Oracle 10g client and added ODBC client successfully. server also communicating
properly, and I installed my application also. After installing it was showing the error msg "a connection to server could not be made hence proper authentication cannot be made please check your network" when I trying to open the application. Please
check this and give answer to help me.Hi Mohankrishnag,
This is Microsoft SQL Server Analysis Services forum. According to your description, you issue is related to Oracle database and your customer application. If the issue relate to SSAS, please elaborate your issue, so that we can make further analysis. If
the issue not relate to SSAS, please post the issue on a corresponding forum, so that you can get more help.
Here are some links for your reference.
http://www.mathworks.in/matlabcentral/answers/35892-problems-connecting-with-oracle-database-win7-64-bit-os
http://stackoverflow.com/questions/15448362/ms-sql-server-cannot-odbc-connect-on-windows-7
Regards,
Charlie Liao
TechNet Community Support -
"no internet connection. please check your network...
each time i try to use my gps on the n95 8gb it comes up with "no internet connection. please check your network settings" even though last time i tried it was fine with the same default access point being contract internet. it also doesn't allow me to use the web. i am on vodafone and it has been fine up till now with the same setting.
any ideas appreciatedcheers ruko2. before i had chance to read your reply i tried simply turning the phone off and on and this sorted the problem. i believe it is due to the same thing you was pointing me towards in the fact that applications must have been running and i simply cleared this by accident. the 'age old' way of turning technology off then on works again : )
it is odd that it comes up saying 'no packet data...' or whatever when accessing the web and 'no internet connection' with the gps. you'd imagine it to simply not load or say something like 'low on memory' due to the ram and computing power being used by other programs. -
Please help whenever I try to log into FaceTime it's says unable to connect please check you network connection than try again I've tried everything and even waited up to an month for something to change but nothing has!! Please Help!!!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Hi
I have MacBook Air , yesterday I tried to use FaceTime but it won't even connect I keep getting this message " please check your network and try again later " my network work perfectly with everything . however FaceTime works on my iPad . can someone please help me with this problem .
thank youFaceTime, Game Center, Messages: Troubleshooting sign in issues
-
Facetime won't connect "please check your network connection
when trying to connect to facetime in my imac it says can not sign in please check your internet connection
Troubleshooting FaceTime
http://support.apple.com/kb/TS3367 -
"Could not connect please check your connection and try again."
Whenever I try to log into Imessage, FaceTime, or Snapchat I get this error. I am able to get on my Imgur App and Safari. What could be wrong with my phone?
Hi Gto3222,
If you are having issues connecting to iMessage or FaceTime, you may find the following article helpful:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
If it seems like you are having issues with any Internet connected app, then these docs may be more helpful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Regards,
- Brenden -
Cannot connect to abap server, please check your abap server connection
Installed new NW BPC 7.5 system on windows 2008 server but get the error as follows
when logon to BPC server:
"Cannot connect to abap server, please check your abap server connection".
"define system user group tab" is inactive in server manager also.
Server Diagnostic errors for SAP Server Connection:
Database Connection
Status Connection Error
as per note 1385864 but this note has not helped get past this status with installation.
User Type value is either set to Communication Data for all three users (BPC_ADMIN, BPC_SYSADMIN, BPC_USER).
and these accounts are not locked.
Any ideas for these errors?
Regards,
AidanHi Aidan,
"Your logon id (domain\user) does not have SystemAdmin rights; some functionality
is disabled."
This is caused by the fact that the user you are logged in as isn't in the UJA_SVR_DEFAULT table, the SYSADMIN field needs to have a value that contains your user id (i.e. DOMAIN\USER) . You can set this up with the UJA3_WRITE_SYS_USERS program.
"When I try to install APPshell the following errors occur:
@8O@ UJA_DATA_CHECK E 006 Application PLANNING's multiprovider /CPMB/ATMKOOE not exist in BW
@8O@ UJS_EXCEPTION E 003 Errors occured during "after import" method call during activation"
Aidan, sounds like something went terribly wrong during your activation process. Do this, Clean the appset with the UJS_ACTIVATE_CONTENT program and make sure that everything is completely deleted. Make sure that there is a lot of memory available for the activation and try it again.
It should work.
Hopefully this helps you.
Cheers, Scott -
So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.
Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time -
Cannot get on iMessage or FaceTime I get this message "FaceTime Activation: Could not sign in. Please check your network connection and try again
Try something really simple.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or try this. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Or try this as well. Go to Settings>General>Date and Time>Set Automatically>On. Make sure it is set to On.
@Freckles888 ..... I really doubt that "millions of others" are having this problem. I think that news would be all over the airwaves and Apple would be taking more heat about it that we can imagine. -
I am trying to activate iMessage. I receive a message that says "Could not sign in. Please check your network connection and try again." I connection is strong. I can browse the internet but cannot connect to iMessages. I don't understand. Any ideas.
Turn iMessage off and then on again, wait a few minutes.
Turn Airplane mode on and then off again, turn iMessage off and then on again, wait a few minutes.
Make sure your iPad is on Wi-Fi, reboot your iPad, turn iMessage off and then on again, wait a few minutes.
Wait and try again later -- Apple's servers can get overwhelmed or experience outages just like anyone else's. -
already connected to wifi, has secure connection but cannot connect to app store errrormessage is a secure connection could not be established. please check your date & time settings. please help
Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight -
I am having trouble connect to the app store, the error I am given is - Cannot conntect to the Store. A secure connection could not be established. Please check your Date & Time settings. - I checked my date and time settings and also shut down my Ipod touch.
See:
Can't connect to the iTunes Store
Also, besides the time and date being correct make sure the time zone is also correct. Also, if yo have iOS 5, make sure date&Time is set to Automatic.
Maybe you are looking for
-
How do i start up from the dvd drive on an imac
Just got a 27 imac os x 10.6. tried to migrate from my macbook pro os 10.5.8. migration by ethernet with the 2 connected to each other only. Migration failed after over an hour. so i clicked cancel migration waited another hour nothing happened so
-
What should be the extra circuitry for this??
I am an undergraduate student working on project for measurement of automotive relay parameter measurement using LabVIEW. The parameters to be measured are: 1)Operating time 2)Release time 3)Pull up voltage 4)Drop off voltage 5)Coil Resistance 6)mV d
-
Moving already backed-up data to different drive
Hi all - I have about 700gb of videos that I want to move off my iMac's internal hard drive onto an external drive. The videos have already been backed up with Time Machine. After I move the videos to the external drive, I want to continue backups on
-
Being asked to install Lightroom 5 again!
Hello, Once again I note that when I open up the Creative Cloud app on my computer running Windows 7 Lightroom 5 isn't listed under 'Install Apps'; it's listed under 'Find New Apps'. I am confused as to why this is happening as I have been using Ligh
-
Error generating WebServices thro' Axis
Hi , On generating webservices for a simple program ( which add's two integer) I am getting following error in client side - AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client faultSubcode: faultString: java.lang.InstantiationExce