"Your call is being transferred ... please hold"

Hi all,
I've noticed an intermittent problem with my iPhone 3GS when calling people. I ring someone and I hear some ringing (as normal) followed by "Your call is being transferred. Please hold." This message repeats twice and then invaraibly goes to answerphone. Sometimes there will be no ringing beforehand, just silence then the message.
Any time this happens, the person's phone has been on, but they have not got a call or a missed call. Both of us have had signal at the time too. This is not just one person either, it has happened with different people.
Any help?
Thanks
James

Seriously, any ideas?

Similar Messages

I think my call is being intercepted please advise

hi i have a subscription
i phone usa for conference calls,normally smooth
i call today,,,im not ssked ss usual to put in code,,
instead an american accent from talky.com is talking proving options,,,i tryed a few times yet was unable to get into the call,,,my meeting
im wondering if some random company has interceoted my call???
am i being charged beyond my subscription
have lookdd on internet who a what are talkie.com
how do i protect my skype account,,,i do not have a skype no..
also,,there was a woman message ssying to cancel this call phone 7124324282 which i did,,,it rang then hung up
scared!!!
cannot afford phone hacking stuff
thanku for ur support

Oh i didnt even notice, thanks for telling me !

"Your call is being recorded" announcement

Hello,
I've a customer that needs the above announcement before sending the call to the DDI numbers. The extensions are being recorded by Witness Systems.
They only have CallManager and Unity.
I was looking at doing this in Unity by sending call to a call handler based on it's DDI in the Unity routing table. This would be forwarded on to a Call Handler specific to the DDI with the announcement then another Call Handler to transfer to the actual extension.
Problem.
1. What's the maximum amount of entries in the forwarding routing table?
2. If the subscriber already exists with the same DDI number the call is sent to the subscribers call handler instead.
Any help would be very much appreciated.
Regards,
Michael

Thanks for that. That's useful to know. I'm currently at 50 DDI's.
Regards.

How to implement "Please wait your request is being processed" window ?

Hi all,
We are integrating BSP iviews in our portal. When the BSP applicaiton is being processed(eg. a form is submitted"), is it possible to show a small window like "Please wait your request is being processed" ? .
Such a window appears when any operation is performed in the KM content.
How to achieve such a functionality with the integrated BSP applications. How do I implement this functionality? What are the API's? Any sample code is available?
Thanks and Regards,
Gauri Gosavi.

Hi,
in KM iview there is a hidden DIV with this:
<div id="htmlb_wait" style="z-index:99; display:none; visibility:hidden; left:0px; top:0px; width:0px; height:0px; position:absolute; overflow:hidden;">...</div>
Now you can put it into your BSP page (as hidden). Now before every form submit (onClientClick for button, ...) just call a JS function, which will change the visibility of this div to visible. So the DIV appears and stays here until page refresh.
Hope this helps a bit.
Romano

Please wait your request is being processed in MSS general overview

Hello All,
I have a requirement MSS. When the employees tries to open u2018General Overviewu2019 or u2018Compensation Informationu2019, is it possible to show the wait spinning clock or Please wait your request is being processed, indicating the page is opening?
Currently u2018General Overviewu2019 or u2018Compensation Informationu2019 is getting open in new window with menu bar and tool bar.
One more thing i want to add that First time when you click on general iview a new window open and it will not show you that spinning wheel.but if you refresh that by clicking left most top corner it will show you that wheel.
Regards
Bhargava
Edited by: Bhargava Kumar on Aug 30, 2010 1:00 PM

HI,
Insert a new view in the same window, in which your concerned view is there. Make this new view as the entry view of your application. Use TimedTrigger UI element in this view and you can also provide a Label like "Please wait your request is being processed" in this view only. After the processing is over, you can call the next view using navigation.
RV

Please wait your request is being processed

Hello All,
I have a requirement MSS. When the employees tries to open u2018General Overviewu2019 or u2018Compensation Informationu2019, is it possible to show the wait spinning clock or Please wait your request is being processed, indicating the page is opening?
Currently u2018General Overviewu2019 or u2018Compensation Informationu2019 is getting open in new window with menu bar and tool bar.
Regards
Bhargava

HI,
Insert a new view in the same window, in which your concerned view is there. Make this new view as the entry view of your application. Use TimedTrigger UI element in this view and you can also provide a Label like "Please wait your request is being processed" in this view only. After the processing is over, you can call the next view using navigation.
RV

Why does this site have online chat when you can never actually chat - always "not available"? I was trying to get a simple question answered without calling and being on hold for 10 minutes?

Why does this site have online chat when you can never actually chat - always "not available"? I was trying to get a simple question answered without calling and being on hold for 10 minutes?

Hello flabucki,
Help is just a post away for you my friend! I can help with your questions right here. May I ask what question do you have? Both myself and the community would love to assist in any way that we can.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

I recently got an iPhone 4 out of nowhere it has decided to go to connect to iTunes screen/emergency calls only when I plug into iTunes it states we are unable to continue with your activation at this time please try again later, or contact customer care

I have recently got an iPhone 4 out of no where it has decided to think that my headphones are in and they are not but does work with headphones in.
Then later on within the same day it after turning my phone on and putting it on charge it comes to the screen stating to connect to iTunes/emergency calls only/no service so I connect it iTunes and it says we are unavailable to continue with your activation at this time. Please try again later, or contact customer care.
HELP!

the same problem but i used it already for 3 years my iphone 4, when i update to ios 6.1.3 version, now is failure like said.
we are unable to continue with your activation at this time please try again later, or contact customer care
any help please. i am here in saudi arabia city of jeddah.
thank you very much in advance
pabs

Somehow I can't hear people talking on my iphone 4 either when calling or being called. I've bought this one for half a year. I need your help~Thank you in advance.

Dear Iphone fans,
Recently, somehow I can't hear sounds when talking on my iphone4 either when calling or being called. When asking them later, they said they can hear me but my sound become very low and unclear. And I can't hear a thing at that time. Could anyone tell me how I could fix the problem.
I've bought this one for half a year. I need your help~
Thank you in advance.

Dear Iphone fans,
Recently, somehow I can't hear sounds when talking on my iphone4 either when calling or being called. When asking them later, they said they can hear me but my sound become very low and unclear. And I can't hear a thing at that time. Could anyone tell me how I could fix the problem.
I've bought this one for half a year. I need your help~
Thank you in advance.

Your call cannot be connected. Please check your phone settings.

Though my load balance is still sufficient enough to make outgoing phone calls, a recording which says "Your call cannot be connected. Please check your phone settings." keeps on playing.
Any idea on how to resolve this?

Did you verify with T-Mobile before you left that you had international dialing enabled?

Disable "Please wait While I Transfer your call" from cuc 9.0

Dear All,
I've installed the Cisco UC Solution with CUCM 9.0 and CUC9.0. I'm using CUC for auto attendant and i want someone who can help me how to remove the sound "Please wait While I Transfer your call" from CUC which comes at the time of call routing.
best regards
Kennedy

Hi Kennedy
Please go to system call handler - edit your Call handler which responsible for AA - transfer rules- On this page you will find transfer actions uncheck play "wait while i transfer your call prompt".
Thank you
Please rate all useful information

How to restrict external transferred/called party ID to internal calling party while being transferred by internal switchboard?

We are using CUCM 8.6.2:
User-A, with extension ‘xxxxx’ calling internal switchboard operator ‘yyyyy’ (switchboard operator using ARC operator console system) with the request to connect to doctor’s mobile number ‘zzzzzzzzzz’;
Once the switchboard operator transferred (blind or consulted all the same) the call to doctor’s mobile ‘zzzzzzzzzz’, User-A can see the doctor's mobile 'zzzzzzzz' on his/her phone ‘xxxxx’.
How can I restrict User-A’s phone with extension ‘xxxxx’ seeing doctor’s mobile ‘zzzzzzzzzz’ after being transferred by switchboard operator ‘yyyyy’.
I would be very greatful to get some hlep on this matter.
Early thanks to all of you who has time, clue or solution for this.
Regards,
Mohib

I ended up logging a call with Cisco and got the solution, so thought I'll share with you all.
Although there is possible configuration per DN but that can be a bit of complex configuration and also will vary depend upon individual route pattern and circumstances.
I used the global configuration suggested by Cisco engineer for our organisation as mentioned bellow:
Choose Service > Service Parameters in the Cisco Unified CallManager Administration page.
Choose the PUB IP and then choose the Cisco CallManager service.
In Clusterwide Parameters (Device - General) change the parameter value of Always Display Original Dialed Numberto true. The default setting is false.

Wait...Your request is being processed

Hi,
I am successfully downloading a PDF document, but the calling window never stops processing and displays <b>Wait...Your request is being processed</b>.
How can I prevent that?
Here is some coding from the OnInputProcessing event handler:
* some Browsers have caching problems when loading PDF format
runtime->server->response->set_header_field(
                     name = 'cache-control'
                     value = 'max-age=0' ).
* set file name
runtime->server->response->set_header_field(
                     name = 'content-disposition'
                     value = lv_filename ).
* finally display PDF format in Browser
runtime->server->response->set_data( data   = l_pdf_xstring
                      length = l_pdf_len ).
navigation->response_complete( ).
Thanks.
/Elvez

Hello Elvez,
this behavior is do to the <xhtmlb:protectDoubleSubmit> what can not be user together with download. As the browser where the protect is active is never reciving a repsonse from the server. >> It does not knows when to remove this element.
Please correct your page.
Best regards,
Dezso

My iMessages don't work since updating. It says the Messages database is being upgraded, please wait while it finishes or Quit Messages and relaunch it later. How do I get them working again?

My iMessages don't work since updating. It says the Messages database is being upgraded, please wait while it finishes or Quit Messages and relaunch it later. How do I get them working again?

Back up all data.
Quit Messages if it’s running. Force quit if necessary. Relaunch it and test after each of the following steps. If the problem isn't resolved, quit again and go on to the next step.
Step 1
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
From the Category list in the lower left corner of the window, select My Certificates. Look carefully at the list of certificates in the right side of the window. If any of them is marked with a red "X" as expired or invalid, delete it. Also delete all items with "iMessage" or "com.apple.idms" in the name, whether valid or not.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Log out and log back in.
Step 2
Hold down the option key and select
          Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
          Containers/com.apple.corerecents.recentsd
          Caches/com.apple.Messages
          Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
          Containers/com.apple.iChat
          Containers/com.apple.soagent
          IdentityServices
Leave the Library folder open. Log out and log back in.
Step 3
Go back to the Finder and move the following item from the open Library folder to the Desktop:
          Messages
Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place.
Step 4
In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
          com.apple.iChat
          com.apple.ids
          com.apple.imdsmsrecordstore
          com.apple.imessage
          com.apple.imservice
Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post your results.
If you later decide that you don’t like the results of Steps 3 and 4, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup.

Confirmation with status "Currently Being Transferred"

Hi ,
we have implemented classic scenarion and for one confirmation , the backend service entry sheet isn't created .
How can i push this to create service entry sheet in backend. i have tried "bbp_pd_conf_transfer " but it did not help.
from bbp_pd i can see the the header status as "HEADER I1017 Currently Being Transferred".
Thanks and Regards
Iftekhar Alam

Hello Iftekhar Alam
Check whether the Idoc is created or not , to check this goto WE02 .
If the Idoc is created in SRM then you can see the same Idoc in the backend(R/3).
If the Idoc is not transfered from SRM then you can know the error in the status section of the Idoc.
If the Idoc is transfered from SRM and the Idoc is not posted in R/3 then the problem might be in R/3 and you can see the error in status section of the Idoc.
Please let us know what is the status and the errors information and will try to solve your issue.
Regards,
mani

"Your call is being transferred ... please hold"

Similar Messages

Maybe you are looking for