"Your computer does not have the hardware to run this software"

When I try to install Final Cut Studio, I receive the error "your computer does not have the hardware to run this software." I just purchased a brand new 13in macbook pro with 4gb of ram about 2 weeks ago. This computer is more then capable of running this software so what's the problem? How do I fix it? I just recently boot camped windows 7 on this thing just in case that matters somehow. Feedback? Comments? appreciate it...

final cut studio 5 I believe
There is no Final Cut Studio 5 (yet). The current version is Final Cut Studio 3, which includes Final Cut Pro 7. Final Cut Pro 5 is NOT compatible with IntelMacs. Version 5.1 was the first version to be compatible with IntelMacs.
-DH

Similar Messages

Performance Update 1.0 "Your computer does not have eligible hardware" ?

i tried to do the apple Performance Update 1.0 update but when i double clicked the pkg file it says "This computer does not need this update." "Your computer does not have eligible hardware." why is it saying this and what should i do? just so you guys know i have a intell macbook pro 15" and ive been have overheating problems that disconnect me from the internet when it overheats and then i have to restart the computer to fix, and also my computer is real slow with alot of hanging beachballs since i upgraded to snow leopard. im hoping this update will solve these problems if i can figure out how to download it.
another thing i should point out is this update did not come up in the software update. i went to the Performance Update 1.0 page myself to download
Message was edited by: johnpalley

Yeah but what about the rest of us!
I have two Macbook Pros (Early 2008) with upgraded hard drives that didn't have this clicking (hard drive head parking) issue in Leopard but now do in Snow Leopard. Apple knows this is an issue, makes an update pretty much for every other model but this! I've called Apple Care and no one seams to have heard of this issue even though its all over the internet and they released an update to specifically address this issue!!! Come on Apple, if you going to attempt to address an issue do it for all the computers effected! What my $3000 spent a year and a half ago is no good and what... now you consider my computer obsolete?
*** - I say that since I've contacted Apple about this for the past 2 months, they come out with an update to fix the issue, I'm all excited only to find out my computer doesn't quality & my computer will now continue to pause for 2-4 seconds 100 times a day!!! Apple get it together... Oh and its the same hard drive that is BTO from apple but since I installed it (which your able per Apple) the hard drive doesn't have the custom apple drivers?

Your computer does not have sufficient memory to perform this operation in Captivate

I am currently new to Captivate 4 and I keep getting this error message "Your computer does not have sufficient memory to perform this operation. Do the following"
I am trying to publish a large project were I recorded voice discussions over a power point presentation. The project is about 41 slides long and recorded using the video camera option. What can I do to stop getting this error message and publish this project. Help!

Hi,
Please check the memory available in your system.
Also please try the following -
- Open your Captivate project which you wish to publish
- Go to menu item Edit > Preferences
- In the Preferences dialog, go to Project > SWF Size and Quality
- Uncheck the checkbox Advanced project compression
Now try publishing the project.
Regards,
Mukul

Your computer does not have sufficient memory resource to publish your file

I just downloaded CP5 trial version to see what's new. Is it just me or is it really buggy?
I received 'Adobe Captivate has stoped working' half a dozen times but managed to convert a small CP4 project (35 slides not a lot of animation or voice over) and tried to preview it. I got the message 'your computer does not have sufficient memory resource to publish your file'. I'm working on a new laptop with 4 GB of ram and I still get that message even when I kill everything else and only have Captivate running. I'm working with Windows 7 on 64-bit OS. Has anyone else run into this? How much memory does CP5 draw?
Needless to say I won't be upgrading any time soon...
Best,
Aimee

Okay it happened again.
Here's the error:
And here is the CPU:
I would be happy to upload the project file if you provide me instructions about where to put it. However, I opened another project to test if it was just that project and I received the same error.

EA2700 - Your Computer does not have Networking Capability?!

I'm kind of a novice when it comes to networking and computer. I receently purchased a EA2700 for the house. I've managed to plug everything in the proper locations, got everything going and internet working on my PC with a wired connection. Everything was going smoothly until i put the setup CD in to setup the router. I ran setup and at the loading bar (0%) an error came up saying that "Your Computer Does Not Have Networking Capability". I'm using Nvidia nForce that came with the motherboard (to my knowledge at least). I can go on websites and also get to 192.168.1.1 BUT I just can't seem to get pass that networking capability error. I've also tried to update the Nvidia nForce driver but doing that caused my internet to not work at all. So I just rolled back to the previous driver which could get me online at least.
If anyone has any idea how I can fix this, please let me know cause I'm out of ideas and not quite sure what I need to do at this point. Thank you very much in advance.

Refer to the links below for steps on how to setup a router.
Setting up a Linksys router with Cable Internet service
Setting up a Linksys router for DSL Internet connection
Setting up a router with a Static IP account
Changing the Wireless Network’s Name (SSID) on a Linksys Router
Setting up WEP, WPA or WPA2 personal wireless security on a Linksys wireless router

Your computer does not have sufficient memory

This problem is already tracked in a couple of other threads but I wanted to start a new one where I have already implemented most of the recommended fixes but am still having a problem. When attempting to publish various projects, and with no particular consistency, I'll receive this error:
Your computer does not have sufficient memory resources to publish your file.
I always launch Cp5 as an Administrator
I always clear the cache
All projects have the following Preferences un-checked: Advanced Project Compression and Compress SWF File
I continue to reboot and re-launch until publishing inexplicably works.
Once a project is suceesfully published, attempting to do so again usually results in the same error.
After receiving the error, and attempting to publish again, Cp5 typically crashes
I am running Windows 7 with a 2.66GHz processor and 4 GB of RAM on a 32-bit system
Please advise on any fixes, solutions, work-arounds, or animal sacrifices that will help me out.
Thanks!

Rather than blame Captivate, this sounds to me like there's something in your project that might be causing instability.
I was having the same problem on one of my projects many months ago when I was working on the Cp5 beta program. It turned out to be due to having square braces [ ] in the Slide Notes area. (This was confirmed by Adobe techs after I sent them the project file.) Apparently there are some characters that should not be used in the Slide Notes area, especially if you use them in Closed Captioning. It was the fact that I had accidentally included a Notes line with square braces as a CC line that caused the error. So I removed all square braces, replaced them with pipe characters, and haven't seen the issue since.
Some other questions in case the above doesn't work for you:
Is this project perchance one that started life in a previous version of Captivate and you upgraded to Cp5, or was it created from scratch in Cp5?
Does it do this in just this one project or on any Captivate 5 project you create from scratch?
How big is the project?
Does it contain any Flash animations that might contain AS2 code or that were published as AS2 (even though they only contain stop() actions)?
Have you tried copying groups of files from this problematic project over to a fresh new blank project to see if you can replicate the issue there. As soon as you see the issue reappear, try deleting out the last group of slides to see if that removes the issue again. By a process of elimination you may be able to find the actual slide/s that are causing the issue, and then keep deleting items off the slides until you are able to find the actual object. I've found corrupt objects this way on a few rare occasions that Cp projects became unstable.
Hope this helps,
Rod

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

You are not allowed to continue because your account does not have the proper privileges

I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.

there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this:

HT3775 hello, im trying to open a document but it seems like my computer does not have the require software to open it could you please tell me what can of software do i need in my laptop?

hello, im trying to open a document but it seems like my computer does not have the require software to open it could you please tell me what can of software do i need in my laptop?

In order to help, more information is needed.
What type of document is it (word document, picture or?) And do you know what software it was created with and what file format it is?

Your system does not meet the minimum requirement for this update (9996)

Hi
recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
Hardware Ids are:
PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
PCI\VEN_8086&DEV_0000&SUBSYS_00008086
PCI\VEN_8086&DEV_0000&CC_020000
PCI\VEN_8086&DEV_0000&CC_0200
Regards artie

I solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
I tend to agree that either the NIC is bad or possiblly a factory restore would help.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

How can i share my library with my new computer when the itunes on the new computer does not have the "look for shared libraries" command in the preferences/shared pane?

It worked fine before i updated the most recent update, My old computer readds the new one but the new one does not read the old one now.

Is the iTunes library actually shared on the old computer?
I have never had a need for forcing iTunes to look for shared libraries, it simply detects them.

HT4623 im trying to update my phone and have goggled how to but my phone does not have the option to click on software update has anyone else had this problem and if so how did you go about it. thanks in advance.

Im trying to update my iphone 4s as i can't dowload alot of thing as it says i need to update to IOS 5 i have googgled how to do it but my phone does not have software update option on it. does anyonw know how to fix this problem or had this problem? if so how did you go around fixing it and updating the phone. thanks in advance.

gemsmobiletans wrote:
my phone does not have software update option on it.
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes Installed
iTunes free download from www.itunes.com/download
Note:
The Current iOS for the iPhone 4s is iOS 7.

Computer does not have the latest version of Network Magic????

Your Network Magic Version installed:           5.1.9055.0-Pure0
The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.:     DSL
The Brand of Modem and its Model Number the router is connected to.:      Motorola Surfboard SB5100
The Brand, Model, Hardware Revision of your Router and include the Firmware Version: D-Link DIR 655 Rev. A4    Firmware 1.21
The Method of connection your problem computer has to the Router: Wired or Wireless: Wireless
Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1: Vista (Ultimate) SP2
Software Firewall in use: McAfee Personal Firewall 9.0.136 Build: McAfee Personal Firewall 10.3
Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
          MCAfee SecurityCenter 9.3
My problem is this. I downloaded Network Magic from the link on the web page, after I made my purchase, on every computer. Things were working fine with the computer above, then one day I was changing the internet usage times and I received an error message:
THE COMPUTER NEEDS NETWORK MAGIC, NETWORK MAGIC VERSION 5.0 OR LATER MUST BE RUNNING ON THE SELECTED COMPUTER IN ORDER FOR YOU TO CONNECT TO IT.
Now prior to that day I was about to connect to it from my computer. I am also still receiving Network Magic reports on the above computer sent to my email everyday. If the software is not install like the error message says then how is it that I continue to receive the computer usage reports?

Chiangel wrote:
Your Network Magic Version installed:           5.1.9055.0-Pure0
The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.:     DSL
The Brand of Modem and its Model Number the router is connected to.:      Motorola Surfboard SB5100
The Brand, Model, Hardware Revision of your Router and include the Firmware Version: D-Link DIR 655 Rev. A4    Firmware 1.21
The Method of connection your problem computer has to the Router: Wired or Wireless: Wireless
Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1: Vista (Ultimate) SP2
Software Firewall in use: McAfee Personal Firewall 9.0.136 Build: McAfee Personal Firewall 10.3
Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
          MCAfee SecurityCenter 9.3
My problem is this. I downloaded Network Magic from the link on the web page, after I made my purchase, on every computer. Things were working fine with the computer above, then one day I was changing the internet usage times and I received an error message:
THE COMPUTER NEEDS NETWORK MAGIC, NETWORK MAGIC VERSION 5.0 OR LATER MUST BE RUNNING ON THE SELECTED COMPUTER IN ORDER FOR YOU TO CONNECT TO IT.
Now prior to that day I was about to connect to it from my computer. I am also still receiving Network Magic reports on the above computer sent to my email everyday. If the software is not install like the error message says then how is it that I continue to receive the computer usage reports?
Hi Chiangel,
If Network Magic is not now installed on the question computer, you need to unsbscribe from the E-mails themselves to stop them.
As for not seeing the computer from the other computer, you need to adjust Vista's Network and Sharing Center, to allow the computers to see each other.
What build of McAfee Firewall are you running?
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Your Computer Does Not Have Sufficient Memory Resources to Compress SWF File

I'm sure I'm not the first person to hit this error. And under most circumstances, I would shrug it off and work on cutting the size of the presentation I'm working on down. However, this particular instance of the error is baffling.
To begin, I imported an 87MB PowerPoint Presentation into Captivate 5.5, with recorded audio attached to all of the slides. Captivate is able to pull it in just fine, and I am even able to work on it and manipulate the 18 slides that are produced to my whim. However, when I go to publish the file (which is an integral part of getting the content onto the web), I am struck with this error. The file does have some custom animations that are timed, but through the whole thing there are only 13 of those. So I decided to do some math to try and figure out exactly how much of the 4GB of DDR3 RAM, 16GB Page File, and 512MB of dedicated video memory Captivate was using, to see if it could possibly be running out of memory. Assuming that each slide and each animation gets its own, full-depth, 32-bit bitmap image in the process, that brings the size of the rendered slides up to around 81.7MB in memory. Tacking on the 89MB of the original file again, I'm left with a total RAM usage of 170.7MB that it theoretically should be taking. Much less than the 4GB than the resources available.
And even then, I look at task manager to see, and Captivate is holding steady at 283,076KB of memory during the publication process. And then when I go to look at how much of the RAM is being used, I see only 2.38GB of my 4GB is actually being addressed. That's 1.62 gigabytes that Captivate is ignoring that it could (and should) be pulling from on my 64-bit, quad-core computer. Adobe, telling me I don't have enough RAM when there is1.5GB sitting untouched and unallocated is bordering on absurdity.
I imagine there's a limit somewhere inside Captivate that's telling it not to go past that 283,067 number: every other Adobe program I've used has had some way to let you control how much RAM it can use. But look as I may, I cannot find any way to tell Captivate to use more resources and take priority over other programs. Is there some way to do this, or do I have to break this small presentation down to a handful of even smaller presentations and daisy-chain them?
Thank you.

Try turning off compression settings in Project Preferences:
If the project then renders out, try turning them on again one at a time until you find the one that is fouling things up. It's most likely to be the Advanced Project Compression.

My computer does not have the processor requirements for Flash 14. I can not play any videos or do school work. What version can I get with a processor of 2.1GHz?

I need a version of flash that will allow me to watch videos and have access to school before July 2nd. What version can I download to do this and how do I download it? I am getting frustrated.

here are older versions, Archived Flash Player versions

"Your computer does not have the hardware to run this software"

Similar Messages

Maybe you are looking for