Your Digital Id Name Cannot Be Found By The Underlying Security

Hi All,
I found many links to this error message, but none of them helped.
I created a self signed certificate for testing e-mail signing and encryption. I was able to sign and send an encrypted email. But when I try to open an encrypted email I get the message "Cannot open this item. Your Digital ID name cannot be found by
the underlying security system". I have the certificate under the address book of Outlook 2010.
Is there anything wrong with the certificate or I'm missing anything?
Regards,
Madhukar

Hi Madhukar,
The error "Your digital ID name could not be found by the underlying security system." is typically caused by one of the following reasons:
The sender of an encrypted message uses a Public Key for the recipient that is not installed on the recipient's computer (such as an expired Digital ID).
Your digital certificate is damaged or corrupted.
Please take a look at this KB article and see if it helps:
http://support.microsoft.com/kb/258527
(Note, although the link applies to an earlier version of Outlook, the same concept holds good for Outlook 2010 as well. )
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

The specified resource name cannot be found in the image file.

Dear Experts,
I have developed an import too and it imports many of the Business Objects from a temporary data base to SAP B1. It was running fine for more than 6 months now.
Currently when the Tool is importing Credit Notes in to SAP B1, the following error is thrown.
The specified resource name cannot be found in the image file.
And I have no Clue about the error. Any one had any experience regarding the above error???
Thanks in Advance,
Vasu Natari.

Hello VAsu,
Somethimes this unexpected, ununderstandable eroor messages caused by corrupted observer dll.
Do a clean up (delete %TEMP%SM_OBS_DLL) folder, and see the result ! (i had several issues in the past with some strange messages...)
Regards
János

Ver.9.5 The volume for file name cannot be found

HI,
My work Mac Book pro was recently upgraded to Mavericks from 10.6.8, with iPhoto 11 (ver. 9.5) also an included upgrade. One album of photos is no longer accesible - clicking on each thumbnail provokes the following window "The volume for <file name> cannot be found. The "Try again" option doesn't work, and the alternative, which is to use the finder to locate the file is useless, as the files are buried in a library spare bundle. When I copy the file name, and search on the volume with the library via finder, it pulls up tiny thumbnail size files.
I have a primary iphoto library on a dedicated USB external drive, which I back up not everytime I update the library (200 gbs spare bundle over USB2!), but regularly. I fear these recently imported files, have not been backed up before up erasing cards, and upgrading system OS, have gone.
Is there any way of getting into the library via finder, or elsewhere in iphoto to refind the original master files which are in there somewhere? These files opened perfectly in iphoto before the recent upgrade.

Thanks for the fast response. I've followed your directions and can't find the file in there, in Masters, Originals, or Modified folders. I found files in Thumbnails folder though. Some of the files from the same event are fine, so its not consistent. I'm also noticing that another file in the event has a totally blurred preview (Its a 24mbs Jpg from a Nikon D800) - not sure if this is at all connected.
The positive news is that my NeoFinder database of drives indicates I should have the 'missing' files on another computer in the office, but I'm still scratching my head on this.

WebDav using https fails with network name cannot be found.

When I attempt to connect to a Webdav server from a Windows 8.1 box it fails with
System Error 67 has occurred.
The network name cannot be found.
I am using the net.exe USE command with the following syntax:
net.exe use Z: https://dav.DomainYaya.com/ <PASSWORD> /user:USERNAME
This exact syntax works for Windows 7.
I have more than one Windows 8.1 box where this fails.
There are various suggestions found all over the internet for various other situations. They do not apply or do not work.
For example, you will find an issue involving sending Basic authentication over http where there are suggestions about changing HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters
That does not work. There is also discussion about the Webclient service. (it is running). One can find discussion of the redirector. (The SYS file is present and is installed with Windows 8+ anyway.)
Using HTTP only fails similarly but with error 53 (but I only did that as a test.) The issue is the HTTPS version.
I have BTW tried this with two different webdav servers.
Any help is appreciated.
Joe

Hi Joe,
Based on our research, the error 67 have the following several possable causes:
•IIS is not installed or is not running on the server that you are attempting to connect to.
•You have not installed the WebDAV Redirector on your client system.
•The WebClient service is not running on your client system.
•You have not enabled WebDAV on your web site.
•You are using Basic Authentication and connecting to your web site using HTTP instead of HTTPS.
•You are connecting to a web site on your local network that is using Fully-Qualified Domain Names (FQDNs) for name resolution, your web site uses Windows Authentication, and you have not added the web site's FQDN to the proxy server bypass list on your client.
For more information, please refer to the article as below:
Using the WebDAV Redirector
http://www.iis.net/learn/publish/using-webdav/using-the-webdav-redirector
According to the test, I am able to reproduce this issue in my lab. By default, the Webclient service is not running on windows 8.1 client. But for windows 7 client this service is running by default.
So please try to start the WebClient service on windows 8.1 client to check if it helps.
If you have any question, please don't hesitate to let us know.
Karen Hu
TechNet Community Support

Install-CsDatabase Command Execution Failed: the network name cannot be found Lync 2013

Hi, I'm having problems when trying to create a new central management database on Lync 2013 to move the one from Lync 2010.
I'm executing this command:
Install-CsDatabase -CentralManagementDatabase -SQLServerFQDN <FQDN of your SQL Server> -SQLInstanceName <name of instance>
The user is member of RTCUniversalServerAdmins and is a SysAdmin on the SQL Server.
Any ideas are appreciated, thanks!
Eduardo Rojas

Hi, thanks for your response,
The server does respond to PING using the DNS name.
I turned on network discovery and verified I can telnet to the port that is using for SQL, however is not the normal 1433, is another port (1439) , so I don't know if that is needed to be specified when excecuting the command and how to do it because I haven't
been able to see a port switch on the Install-CsDatabase command.
I also specified the correct instance for Lync, is the same server I used to install Lync Server 2013.
when Excecuting the commando it starts generating a lot of information when trying to create the database, it's not like it just doesn't find the server and throws the error immediately.
One of the things it says before the error is:
Attaching database xds from data path \\server\c$\csdata\... and the path.
The operation failed because xds is DbState_NonExist.
Attaching database failed because one of the files not found. The database will be created.
State of database xds is DbState_DoesNotExist.
Creating database xds from scratch. Data file path = c:\csdata\centralmgmstore\... and the path.
Then the error is generated: The network name cannot be found.
Any other ideas on how to fix this?
Thanks.
Eduardo Rojas

" the volume for (file name) cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again."

I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.' What does this mean and how do I fix it?

It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

Item cannot be found in the collection corresponding to the requested name or ordinal.

Hi,
I am using Dreamweavers User Authentication tool, and all seems to be working except when I press the 'Submit' button I get the following error;
ADODB.Fields error '800a0cc1'
Item cannot be found in the collection corresponding to the requested name or ordinal.
/coding/test_login.asp, line 35
As far as I can tell the user login works, as I can assess the restricted page, if I manually type in the URL.
My code is listed below;
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
' *** Validate request to log in to this site.
MM_LoginAction = Request.ServerVariables("URL")
If Request.QueryString <> "" Then MM_LoginAction = MM_LoginAction + "?" + Server.HTMLEncode(Request.QueryString)
MM_valUsername = CStr(Request.Form("usercode"))
If MM_valUsername <> "" Then
Dim MM_fldUserAuthorization
Dim MM_redirectLoginSuccess
Dim MM_redirectLoginFailed
Dim MM_loginSQL
Dim MM_rsUser
Dim MM_rsUser_cmd
MM_fldUserAuthorization = """group"""
MM_redirectLoginSuccess = "yes.asp"
MM_redirectLoginFailed = "no_access.asp"
MM_loginSQL = "SELECT usercode, epros_password"
If MM_fldUserAuthorization <> "" Then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization
MM_loginSQL = MM_loginSQL & " FROM DBA.[user] WHERE usercode = ? AND epros_password = ?"
Set MM_rsUser_cmd = Server.CreateObject ("ADODB.Command")
MM_rsUser_cmd.ActiveConnection = MM_Conn_PSCRM_Demo_STRING
MM_rsUser_cmd.CommandText = MM_loginSQL
MM_rsUser_cmd.Parameters.Append MM_rsUser_cmd.CreateParameter("param1", 200, 1, 255, MM_valUsername) ' adVarChar
MM_rsUser_cmd.Parameters.Append MM_rsUser_cmd.CreateParameter("param2", 200, 1, 255, Request.Form("password")) ' adVarChar
MM_rsUser_cmd.Prepared = true
Set MM_rsUser = MM_rsUser_cmd.Execute
If Not MM_rsUser.EOF Or Not MM_rsUser.BOF Then
    ' username and password match - this is a valid user
    Session("MM_Username") = MM_valUsername
    If (MM_fldUserAuthorization <> "") Then
      Session("MM_UserAuthorization") = CStr(MM_rsUser.Fields.Item(MM_fldUserAuthorization).Value)
    Else
      Session("MM_UserAuthorization") = ""
    End If
    if CStr(Request.QueryString("accessdenied")) <> "" And true Then
      MM_redirectLoginSuccess = Request.QueryString("accessdenied")
    End If
    MM_rsUser.Close
    Response.Redirect(MM_redirectLoginSuccess)
End If
MM_rsUser.Close
Response.Redirect(MM_redirectLoginFailed)
End If
%>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
<form action="<%=MM_LoginAction%>" method="POST" name="logon">
<input name="usercode" type="text"><br>
<input name="password" type="text">
<input type="submit" name="Submit" id="Submit" value="Submit">
</form>
</body>
</html>
Any help greatly accepted.

There are several workarounds you could use. I would start by setting the local variable back to the actual column name
MM_fldUserAuthorization = "group"
and then modify the reserved word directly SQL. See if this works:
If MM_fldUserAuthorization <> "" Then MM_loginSQL = MM_loginSQL & "," & """MM_fldUserAuthorization"""
If that line doesn't work, then you might need to concatenate the quotes around the variable, or try a combination of single/double quotes.
Also be warned that once you modify DW's generated code, you probably will not be able to maintain the code in DW server behavior wizard. You'll need to maintain by hand.
Good luck.

"The home folder could not be created because the network name cannot be found" error in AD users and computers

Our home folders are stored on a non-windows NAS device and with Windows XP and 2003 we've always got the above error when creating or modifying users home folders, even when the shares were al ready created and being used.
However this was never really a big issue as the error that popped up was really for information and finshed with a "we've modified the user properties anyway, please create the share manually" type message.
Unfortunately now we are moving to windows 7 and 2008R2, this last part of the the message is missing and it won't accept the correct value.
This issue may be in the way that the NAS device shares the folder, as only the username that matches the folder name can access the share. This behaviour can't be modified.
Is there a way to get Windows 7/2008R2 AD users and computers to behave the same way that Windows XP/2003 does , i.e. don't try and create the share just set the value in the user properties ?
The AD is still at 2003 level and we can still use Windows XP/2003 clients to make the changes but this is a bit of a limitation.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a

Hi All:
I need help!!!
I am using axis2-1.5.1, jdk 1.6, eclipse 3.5, and Axis2_Codegen_Wizard_1.3.0 and windows xp.
I used Axis2_Codegen_Wizard_1.3.0 to generate the client stub and proxy.
I get the following error when I tried to call the web service:
package com.ttdev.ss.client;
import java.rmi.RemoteException;
import com.ttdev.ss.client.SimpleServiceStub.ConcatRequest;
import com.ttdev.ss.client.SimpleServiceStub.ConcatResponse;
public class SimpleClient
     public static void main(String[] args) throws RemoteException
          try
          SimpleServiceStub service = new SimpleServiceStub();
          ConcatRequest request = new ConcatRequest();
          request.setS1("abc");
          request.setS2("123");
          ConcatResponse response = service.concat(request);
          System.out.println(response.getConcatResponse());
          catch(Exception e)
               System.out.println("e.getMessage():"+e.getMessage());
Here is my SimpleService.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="SimpleService" targetNamespace="http://ttdev.com/ss" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://ttdev.com/ss" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<xsd:schema targetNamespace="http://ttdev.com/ss">
<xsd:element name="concatRequest">
<xsd:complexType>
<xsd:sequence>
     <xsd:element name="s1" type="xsd:string"/>
     <xsd:element name="s2" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="concatResponse" type="xsd:string">
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="concatResponse">
<wsdl:part name="parameters" element="tns:concatResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="concatRequest">
<wsdl:part name="parameters" element="tns:concatRequest">
</wsdl:part>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="concat">
<wsdl:input message="tns:concatRequest">
</wsdl:input>
<wsdl:output message="tns:concatResponse">
</wsdl:output>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSOAP" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="concat">
<soap:operation soapAction="http://ttdev.com/ss/NewOperation"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServiceSOAP" binding="tns:SimpleServiceSOAP">
<soap:address location="http://localhost:8080/axis2/services/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the dos-prompt, I get the following error message:
[INFO] Listening on port 8080
[ERROR] The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a
xis2/services/
org.apache.axis2.AxisFault: The service cannot be found for the endpoint referen
ce (EPR) 127.0.0.1/axis2/services/
at org.apache.axis2.engine.DispatchPhase.checkPostConditions(DispatchPha
se.java:65)
at org.apache.axis2.engine.Phase.invoke(Phase.java:334)
at org.apache.axis2.engine.AxisEngine.invoke(AxisEngine.java:251)
at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:160)
at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostReq
uest(HTTPTransportUtils.java:167)
at org.apache.axis2.transport.http.HTTPWorker.service(HTTPWorker.java:26
6)
at org.apache.axis2.transport.http.server.AxisHttpService.doService(Axis
HttpService.java:281)
at org.apache.axis2.transport.http.server.AxisHttpService.handleRequest(
AxisHttpService.java:187)
at org.apache.axis2.transport.http.server.HttpServiceProcessor.run(HttpS
erviceProcessor.java:82)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:619)
Thank you for your help!!!
Yours,
John.

I had the same issue and managed to fix it.
I am using tomcat and had a filter configured for AxisServlet to open a hibernate Session. Somehow (I did not figure it out yet) this filter afects the way the AxisServlet resolves the EPR.
My fix was - remove the filter. It worked. Now I am trying to figure out why.
If you have any clues, please drop a line.

The specified store provider cannot be found in the configuration, or is...

Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
All,
I have a solution developed in Visual Studio 2012 targetting .Net 4.0. Simplified: Startup project is a WPF library and supporting this library is another project that uses Entity Framework to retrieve data. I have copied the connection strings from my EF project to my startup project, and everything seems to work fine on the development machine.
However, as sson as this project is run on a user's desktop they get the error:
System.ArgumentException
The specified store provider cannot be found in the configuration, or is not valid.
Stack trace (transcribed from screenshot, so there might be typos):
at.system.Data.EntityClient.EntityConnection.GetFactory(String providerString)
at System.Data.EntityClient.EntityConnection.ChangeConnectionString(String newConnectionString)
at System.Data.EntityClient.EntityConnection..ctor(String connectionString)
at System.Data.Entity.Internal.LazyInternalConnection.InitializeFromConnectionStringSetting(ConnectionStringSettings appConfigConnection)
at System.Data.Entity.Internal.,LazyInternalConnection.TryInitializeFromAppConfig(String name, AppConfig config)
at System.Data.Entity.Internal.LazyInternalConnection.Initialize()
at System.Data.Entity.Internal.LazyInternalConnection.CreateObjectContextFromConnectionModel()
at System.Data.Entity.Internal.LazyInternalContext.InitializeContext()
at System.Data.Entity.Internal.InternalContext.GetEntitySetAndBaseTypeForType(Type entityType)
at System.Data.Entity.Internal.Linq.InternalSet` 1.Initialize()
at System.Data.Entity.Internal.Linq.InternalSet` 1.get_InternalContext()
at System.Data.Entiy.Infrastructure.DbQuery` 1.System.Linq.IQueryable.get_Provider()
at System.Linq.Queryable.Where[TSource](IQueryable` 1 source, Expression` 1 predicate)
at MyEntityNameSpace.MyEntitySet.LoadData()
I've already verified that Oracle.DataAccess is referenced in my EF project, and I'm including oci.dll, orannzsbb11.dll, oraociei11.dll, and OraOps11w.dll in my main library (fat installation).
This configuration worked when using the older ADO.Net DataSets, but now I want to use EF 4.4 (DataBase first/model first/whatever it's not Code First) because it's just easier to code against. So obviously I'm missing something when it comes to deploying my solution. Any ideas?
Note that this is a desktop application using MS OneClick.

Same issue:
The specified store provider cannot be found in the configuration, or is not valid. ---> System.ArgumentException: Unable to find the requested .Net Framework Data Provider. It may not be installed.
You mention "Sounds like the client system doesn't have an Oracle client installed."
I am using Win Server 2008 R2. I have installed what i think is the right client. How do i tell?
What is the right client? Where do i get it?

Out of Office error: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.'

Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.

The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP

HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?

What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method.

The specified store provider cannot be found in the configuration?

I got the error "The specified store provider cannot be found in the configuration, or is not valid"
while excuting the following command:
E:\Windows\Microsoft.NET\Framework\v4.0.30319\EdmGen.exe /nologo /language:CSharp
/mode:ViewGeneration /inssdl:$(TargetDir)Entities.ssdl
/incsdl:$(TargetDir)Entities.csdl /inmsl:$(TargetDir)Entities.msl
/outviews:$(ProjectDir)Entities.Views.cs
this is to pre_generate views to improve Entity framework performance, itruns well for SqlServer.
What is the issue? I checked in machine.config, it seems ok:
<DbProviderFactories>
*<add name="Oracle Data Provider for .NET" invariant="Oracle.DataAccess.Client" description="Oracle Data Provider for .NET" type="Oracle.DataAccess.Client.OracleClientFactory, Oracle.DataAccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342"/>*
<add name="Microsoft SQL Server Compact Data Provider" invariant="System.Data.SqlServerCe.3.5" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=3.5.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"/>
</DbProviderFactories>

Hey,
Can you check if the line: DbProviderFactory factory = DbProviderFactories.GetFactory("Oracle.DataAccess.Client"); works in a simple console app?
I had the same problem when I had installed both x86 and x64 versions of ODAC. There are two workarounds for x86&x64 issue here[http://connect.microsoft.com/VisualStudio/feedback/details/728483/edmgen-4-0-with-oracle11g-dac-win-7-x64] .

The mapping: XML_NV you are trying to load cannot be found in the classpath

Hi Experts,
We have a EDI to JDBC scenario wherein the incoming EDI files (ANSI X12) will picked up by XI and sends to Backend system and it was working fine. Today when i check the file folder, the EDI files are not picking up by XI system and when I check the Communication channel the below is the error message. Can anybody let me know how to workaround for this issue?
Error: javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping: XML_NV you are trying to load cannot be found in the classpath! Maybe you forgot to compile or to activate the mapping! DESCRIPTION: BICMapping Error: The mapping [not specified] you are trying to load cannot be found in the right path! Maybe you forgot to compile or to activate the mapping!
Your help is highly appreciated.
Regards
Faisal

Dear Abdul
If the mapping is there and the PI system is throwing an error that "Mapping not Found" then please try refreshing the cache.
First try Partial and if it does'nt work then go for Full Cache Refresh.
Alternatively if yours is a Java mapping, try relading the code (zip file) and activate the channel.
Sourabh

SBO Mailer Error - The specified resource type cannot be found in the image file

Hi Experts,
I have created an alert in SBO and selected email and internal option for same. I get internal message however email is not getting delivered, I checked the Event Viewer of Windows and below error is shown for SBOMail.
The description for Event ID 62 from source SBOMail cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Failed to mark records error [-1]
The specified resource type cannot be found in the image file
I can send email from sbo for other documents but the alert is not delivering email.
Please advise.
Thanks
Deepak

Hi Deepak..
Check with these threads...
http://scn.sap.com/thread/966957
http://scn.sap.com/thread/1295818
SBOMail Application log error
SBOMail error in event log
Hope Helpful
Regards
Kennedy

Your Digital Id Name Cannot Be Found By The Underlying Security

Similar Messages

Maybe you are looking for