Your file could not be printed due to an error...

Hi All,
I have users with a Windows XP client running Office 2003 with the 2007 compatibility pack installed.
The printer is an HP OfficeJet 6500 709a. The user has not experienced any problems printing in the past, and can still print everything except this one Excel Workbook.
It is a 2010 workbook, I have even tried converting the workbook to a 2003 workbook, and I still get the same error.
The error is
Your file could not be printed due to an error on HP OfficeJet 6500 709a on Ne03:. There are several possible reasons:
There may not be enough memory available. Try closing files and programs you aren't using.
If you use a network for printing, there may be a problem with the network connection or the printer driver.
There may be loose cables or a bad connection between your computer and printer.
For more information about troubleshooting printing problems, click Help.
Like I said the client can print other spread sheets and I can print the workbook from other workstations.
Any advice would be appreciated.
Thank you in advance.
A user needs the admin password like nitro glycerine needs a good shake.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, I would like to confirm follow information.
Is this a network printer for specific user?
Have you install the last package for Office and last driver for Printer?
Could you please change another Printer or logon to another PC test this issue.
We can run the
Detect and Repair feature in your Office 2003 programs, you can refer to this link:
http://support.microsoft.com/kb/822238
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

Your file could not be print due to an error on HP Deskjet PCL3 class driver on.

I purchase a new printer HP Deskjet Ink Advantage 1515, I successfully installed it but the problem while im trying to print the document is "Your file could not be print due to an error on HP DESKJET PCL3 Class driver on."

Hi limarache,
From what you have described, it sounds like you are using a alternate print driver rather than the driver for your printer. Please use the HP Print and Scan Wizard to help you troubleshoot this issue.
The Print and Scan Doctor diagnoses and helps resolve common printing, scanning, and connectivity problems, including:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
Click here to download and run the utility > HP Print and Scan Doctor
Please let me know if this resolves the issue, or if you require additional assistance, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I am getting a "Your file could not be printed due to an error on HP Photosmart C4500 series"

I am getting the above message when trying to print OR SEND PDFs from MS Excel. I have tried uninstalling the product software and reinstalling to no avail. This error did not happen on my XP laptop, but is happening on my new Win 7 laptop.
Please help!

HI
Please try to run the below utility and check it this helps.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Please revert if you have more issue.
Regards
Mugu
---- If my answer was helpful please click the "Kudos" star.
If your problem is solved please click the "Accept as Solution" button ---->
Though I work for HP the post are of my own

'file could not be written due to an error' when exporting jpg

I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
ANY IDEAS ANYONE? I'm trying not to have to reproduce days of work to remake the file.
many thanks,
P

Mylenium,
Sounds like you know a good deal about this product. Is there any way to restore a color profile/setting to an earlier point?
I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
Thanks,
Paul

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace? The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

"The file could not be read due to an error" Opens on one computer, displays this on another.

Hello,
I'm trying to troubleshoot several Illustrator files that won't open on desktops at my company's 2nd office. The files open fine on any desktop at my primary office. When opening the files from the 2nd office, it begins "Reading Illustrator file..." then the message "The file could not be read due to an error" is displayed and the file closes out.
Both offices have the same model desktop and are running:
Adobe Illustrator CS6 (up to date)
Windows 7 x64
Both desktops have the same system fonts and I've tried saving the files locally.
Thanks, Shaun

Hey Jacob and Monika,
Sorry if I wasn't clear, but I did already try saving the files to the hard disk.
"Both desktops have the same system fonts and I've tried saving the files locally."
My fix was copying the content of the files into new, blank .ai files. Those new files open from both offices now.
Still, I wish I could have identified the issue in case it happens again. The error message is vague and there isn't much info on the web about it.
Best, Shaun

Your file could not printed due to an error on 6., it's not printing Excel files only

Hi All,
I have users with a Windows 7 client running Office 2007.  The
printer is an HP Laserjet P4010_P4510 series .  The
user has not experienced any problems printing in the past, and can still print everything except the Excel Workbook.  I
get the error message.
The error is
Your file could not be printed due to an error on .........
on 06:.
There are several possible reasons: There may
not be enough memory available. Try closing files and programs you aren't using. If you use a network for printing, there may be a problem with the network connection or the printer driver. There may be loose cables or a bad connection between your computer
and printer. For more information about troubleshooting printing problems, click Help.
Like I said the client can print other word/ Power point
and any other document except Excel document.
Any advice would be appreciated.
Thank you in advance.

Hi,
It's actually not the first time I have seen this issue, please refer to this thread below:
https://social.technet.microsoft.com/Forums/en-US/01bbe40c-f522-4148-a7cc-86303da5416d/your-file-could-not-be-printed-due-to-an-error?forum=excel
Here are some suggestions:
1. If this issue only occurs to one Workbook, copy the file contents and paste them to another new Workbook, try to print and check the result.
2. Maybe Excel is configured to run in Compatibility Mode. Right click on the Excel shortcut, click Properties -> Compatibility tab -> If Excel is configured to run in compatibility mode, untick it and click OK.
3. There may be some corruption in the Excel install, try to repair Office from Control Panel -> Programs and Features.
I hope the information is helpful to you in this scenario.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Unable to create PDF - file could not be printed

I am having a problem with a user who is unable to create a pdf using Adobe Standard 8
The error messages is as follows:
your file could not be printed due to an error on adobe pdf on Ne 04
http://i45.photobucket.com/albums/f97/bsucards/584872418744_adobe.jpg
I have tried to uninstall Adobe Standard 8 and reinstall and do all the updates
I have uninstalled Adobe Reader 9 and downgraded it to Adobe Reader 8
I have reinstalled Office XP
I have created a new profile for this user
The only way I can get it to work is to make the user an admin, which is not an option. We have other users in the company using this version of Adobe without any problems

Hi I dont think this is a permissions issue I just created a new WINDOWS PROFILE this fixed the issue the user already was a admin on the computer. The issue was trying to save/print any file to PDF to either network or local to computer. Once the new profile was made I was able to test and could once again create pdf files. There must have been something in the old profile causing the issue and the new profile fixed the issue it was a last thing to to try as had tried everything I could think of.

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error". This never happened b4. I tried rebooting and that didn't work. Any help would be appreciated. Thanks.

Hi ,
Thank you for your question.
This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
Default Web Site:
Exchange Back End:
Then IIS must be restarted.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Virus Detected (403), Your file could not be uploaded because it contains a virus.

From a Windows 7 Ultimate PC I tried to upload a PDF portfolio containing 35 PDFs. The upload failed with the message "Virus Detected (403), Your file could not be uploaded because it contains a virus."
It is highly unlikely that this PDF portfolio or its 35 PDFs contain a virus. It passed a scan by Microsoft Security Essentials. Any suggestions?
Bill

Hello,
I've got the same 403 error when I want to upload a ebook (purchased on peachpit, see this url for ebook), but when I scan it (windows 8 / avast) no virus found.
Olivier

TS3694 trying to update software on my iphone 4s- "could not be updated due to unknown error" (6). what does this mean. my phone appears to be in a near complete state of update...

Not sure what to do. finally decided to upgrate software on my phone. installed itunes on my new laptop. plugged by phone in and started process. nearing the end i received an error message stating that the phone "could not be updated due to unknown error" (6). HELP!
the phone itself appears to be in mid update....

This describes error 6:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1       localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0     localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry

Hadoop ODBC linked server error: Specified driver could not be loaded due to system error 182

Hi,
I am trying to connect to a Hadoop server through a linked server in SQL Server. I downloaded and installed the Microsoft Hive ODBC driver - HiveODBC64.msi. But while I am trying to create the Linked server using this ODBC driver I am getting below error.
" Specified driver could not be loaded due to system error 182 (Microsoft Hive ODBC driver, D:\....\HiveODBC64.dll). (Microsoft SQL Server, Error: 7303)"
When I tested it locally and in another server, it is working properly. I am getting this error only in this server. looks like a dll error. But cannot identify where/what is the error. Could someone help me fix this issue.
Server info:
OS Name: Microsoft Windows Server 2008 R2 Enterprise Version 6.1.7601 Service Pack 1 Build 7601
SQL SERVER: Microsoft SQL Server 2008 R2(SP1)

Hi LinkedServer,
According to your description, you want to create linked server to connect to a Hadoop server in SQL Server, and you have created it successfully in the test server, the problem is that you get the issue in the production environment, right?
Based on the error message, as you said it seems that the issue is related to the HiveOBDC64.dll assembly. Since you have done it on the test server, you can copy and replace HiveODBC64.dll to production server in the C:\Program Files\Microsoft Hive ODBC
Driver\lib directory. Or you can reinstall the Microsoft Hive ODBC driver. Here is a blog which describe how to create a SQL Server Linked Server to HDInsight HIVE using Microsoft Hive ODBC Driver step by step, please refer to the link below to double check
if your steps are correct.
http://blogs.msdn.com/b/igorpag/archive/2013/11/12/how-to-create-a-sql-server-linked-server-to-hdinsight-hive-using-microsoft-hive-odbc-driver.aspx
Regards,
Charlie Liao
TechNet Community Support

HT201210 In the middle of my update, it stopped and told me that it could not be completed due to an error. Then my computer restarted and it is telling me that I have to restore my phone so that the new version can be completed, and will erase my data an

In the middle of trying to update my iphone 4 to the new ios7 , it stopped and said it could not be completed due to an error. Then my computer restarted and it now tells me to restore to factory settings and I will lose all my media and data on my phone. What do I do, my phone is in recovery mode and cant be used??

You have no choice but to restore the phone.
However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right?

Your file could not be printed due to an error...

Similar Messages

Maybe you are looking for