Your file could not printed due to an error on 6., it's not printing Excel files only

Hi All,
I have users with a Windows 7 client running Office 2007.  The
printer is an HP Laserjet P4010_P4510 series .  The
user has not experienced any problems printing in the past, and can still print everything except the Excel Workbook.  I
get the error message.
The error is
Your file could not be printed due to an error on .........
on 06:.
There are several possible reasons: There may
not be enough memory available. Try closing files and programs you aren't using. If you use a network for printing, there may be a problem with the network connection or the printer driver. There may be loose cables or a bad connection between your computer
and printer. For more information about troubleshooting printing problems, click Help.
Like I said the client can print other word/ Power point
and any other document except Excel document.
Any advice would be appreciated.
Thank you in advance.

Hi,
It's actually not the first time I have seen this issue, please refer to this thread below:
https://social.technet.microsoft.com/Forums/en-US/01bbe40c-f522-4148-a7cc-86303da5416d/your-file-could-not-be-printed-due-to-an-error?forum=excel
Here are some suggestions:
1. If this issue only occurs to one Workbook, copy the file contents and paste them to another new Workbook, try to print and check the result.
2. Maybe Excel is configured to run in Compatibility Mode. Right click on the Excel shortcut, click Properties -> Compatibility tab -> If Excel is configured to run in compatibility mode, untick it and click OK.
3. There may be some corruption in the Excel install, try to repair Office from Control Panel -> Programs and Features.
I hope the information is helpful to you in this scenario.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Your file could not be print due to an error on HP Deskjet PCL3 class driver on.

I purchase a new printer HP Deskjet Ink Advantage 1515, I successfully installed it but the problem while im trying to print the document is "Your file could not be print due to an error on HP DESKJET PCL3 Class driver on."

Hi limarache,
From what you have described, it sounds like you are using a alternate print driver rather than the driver for your printer. Please use the HP Print and Scan Wizard to help you troubleshoot this issue.
The Print and Scan Doctor diagnoses and helps resolve common printing, scanning, and connectivity problems, including:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
Click here to download and run the utility > HP Print and Scan Doctor
Please let me know if this resolves the issue, or if you require additional assistance, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Your file could not be printed due to an error...

Hi All,
I have users with a Windows XP client running Office 2003 with the 2007 compatibility pack installed.
The printer is an HP OfficeJet 6500 709a. The user has not experienced any problems printing in the past, and can still print everything except this one Excel Workbook.
It is a 2010 workbook, I have even tried converting the workbook to a 2003 workbook, and I still get the same error.
The error is
Your file could not be printed due to an error on HP OfficeJet 6500 709a on Ne03:. There are several possible reasons:
There may not be enough memory available. Try closing files and programs you aren't using.
If you use a network for printing, there may be a problem with the network connection or the printer driver.
There may be loose cables or a bad connection between your computer and printer.
For more information about troubleshooting printing problems, click Help.
Like I said the client can print other spread sheets and I can print the workbook from other workstations.
Any advice would be appreciated.
Thank you in advance.
A user needs the admin password like nitro glycerine needs a good shake.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, I would like to confirm follow information.
Is this a network printer for specific user?
Have you install the last package for Office and last driver for Printer?
Could you please change another Printer or logon to another PC test this issue.
We can run the
Detect and Repair feature in your Office 2003 programs, you can refer to this link:
http://support.microsoft.com/kb/822238
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

I am always getting the message ' could not complete due to program error" Why does this happen

I am always getting the message ' could not complete due to program error" Why does this happen

Without knowing a lot more details we can't tell you anything. This is just the most generic Photoshop error message imaginable. What system are you on? What version of Photoshop? what are you doing when the error occurs? Provide as much info as you can. Refer to this as a start:
Working with your Operating System’s Tools
Mylenium

I'm using the free epub reader, the file I imported says "Due to an error in the ePub file, the table of contents can't be displayed correctly.

For experts: The NCX-file is not a valid xml-file..Can you help me? Donna

Hi,
It's actually not the first time I have seen this issue, please refer to this thread below:
https://social.technet.microsoft.com/Forums/en-US/01bbe40c-f522-4148-a7cc-86303da5416d/your-file-could-not-be-printed-due-to-an-error?forum=excel
Here are some suggestions:
1. If this issue only occurs to one Workbook, copy the file contents and paste them to another new Workbook, try to print and check the result.
2. Maybe Excel is configured to run in Compatibility Mode. Right click on the Excel shortcut, click Properties -> Compatibility tab -> If Excel is configured to run in compatibility mode, untick it and click OK.
3. There may be some corruption in the Excel install, try to repair Office from Control Panel -> Programs and Features.
I hope the information is helpful to you in this scenario.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error : URL not called due to an error

Hi All,
         I developed a Web Dynpro ABAp application and tested it through a user with SAP_ALL Profile, and am getting the following error message:
The URL http://sileccdev053.simondelhi.com:8000/sap/bc/webdynpro/sap/zadobe was not called due to an error.
Note
The following error text was processed in the system DEV : WebDynpro Exception:
The error occurred on the application server SILECCDEV053_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program CL_WDR_VIEW_ADAPTER===========CP
Method: IF_WDR_NW7_DELTA_RENDERER~CALCULATE_DELTA_BLOCKS of program CL_WDR_VIEW_ADAPTER===========CP
Method: IF_WDR_NW7_DELTA_RENDERER~CALCULATE_DELTA_BLOCKS of program CL_WDR_WINDOW_CONTENT_ADAPTER=CP
Method: SET_CONTENT of program CL_WDR_NW7_INT_WIN_ADAPTER====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server SILECCDEV053_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server SILECCDEV053_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 300 -u: PWCABAP -l: E -s: DEV -i: SILECCDEV053_DEV_00 -w: 0 -d: 20110215 -t: 111729 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
In ST22 we get the following:
WHAT HAPPENED:
The exception 'CX_WD_GENERAL' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WD_ADOBE_SERVICES==========CP' has to be
terminated.
ERROR ANALYSIS:
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    WebDynpro Exception:
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_FP_API_REPOSITORY", which was raised in the program
     "CL_FP_WB_HELPER===============CP",
    specifically in line 7 of the (include) program
     "CL_FP_WB_HELPER===============CM00V".
    The cause of the exception was:
    Object ZADOBE does not exist
Please Suggest something.
Cheers!!!
Umang

Hi Umnag,
I think this application is using any Adobe Form and there is any issue wth the form interface.
Please check syntax of the Adobe form as well as Form Interface. The Interface methods are throwing some exception which is not handled in the CL_WD_ADOBE_SERVICES.
You can put a break-point in the costructor of above class and pin-point the issue yourself.
Hope this helps!
Reagrds
Vineet

/sap/bc/webdynpro/sap/ags_workcenter was not called due to an error

Hi,
I get the following error when I click on Exception Analysis for one of our managed system.
Solution Manager Diagnostics -> End to End Analysis -> Select the Managed system and click on Exception Analysis
The URL http://kressapcrm.in.kres.keane.com:8000/sap/bc/webdynpro/sap/ags_workcenter was not called due to an error.
Note
The following error text was processed in the system SOL : Exception condition "COMMUNICATION_ERROR" raised.
The error occurred on the application server KRESSAPCRM_SOL_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: EXECUTE of program CL_IGS_CHART_ENGINE===========CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CBUSINESS_GRAPHICS======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SOL in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server KRESSAPCRM_SOL_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server KRESSAPCRM_SOL_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 999 -u: E2E_ADMIN -l: E -s: SOL -i: KRESSAPCRM_SOL_00 -w: 0 -d: 20100107 -t: 164340 -v: RABAX_STATE -e: RAISE_EXCEPTION
Regards
Shailaja

>
shailaja stalin wrote:
> (...)
> The URL http://kressapcrm.in.kres.keane.com:8000/sap/bc/webdynpro/sap/ags_workcenter was not called due to an error.
> Note
>
> The following error text was processed in the system SOL : Exception condition "COMMUNICATION_ERROR" raised.
> The error occurred on the application server KRESSAPCRM_SOL_00 and in the work process 0 .
> The termination type was: RABAX_STATE
> The ABAP call stack was:
> Method: EXECUTE of program CL_IGS_CHART_ENGINE===========CP
> Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CBUSINESS_GRAPHICS======CP
> Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
> (...)
Please check the configuration and version of the IGS.
Regards,
Ruediger

Webgui was not called due to an error

Error as Below
==============
Error when processing your request
What has happened?
The URL http://server01.mydomain.com:8005/sap/bc/gui/sap/its/webgui was not called due to an error.
Note
The following error text was processed in the system Q61 : System error
The error occurred on the application server server01_Q61_05 and in the work process 3 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSMTR_NAVIGATION
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system Q61 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server server01_Q61_05 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server server01_Q61_05 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 999 -u: P0000XXXX -l: E -s: Q61 -i: server01_Q61_05 -w: 3 -d: 20080612 -t: 132603 -v: ABORT_MESSAGE_STATE -e: System error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
================
What is the solution ??
================
PR

Hi,
You can check [note 816973|https://service.sap.com/sap/support/notes/816973] which gives details on problem analysis with ITS as well as the steps to follow to get it working.
Regards,
Nelis

I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???

i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???

Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
I assumed that you have tried the other USB 2.0 port to no success..
Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day!

I keep getting this error message "The iTunes Library file cannot be saved. An unknown error occurred (-50)" I'm not at all technical, so a simple response would be appreciated. Thanks

I keep getting this error message "The iTunes Library file cannot be saved. An unknown error occurred (-50)" I'm not at all technical, so a simple response would be appreciated. I have already downlaoded the latest iTunes software and reinstalled it but the problem remains and I am unable to add additonal music to my library.

make sure the media folder in iTunes > Preferences > Advanced is not blank or out side of your c dirve

BSP Error:bc/bsp/sap/crm_bsp_frame/mainDH.do was not called due to an error

Dear All,
i am working on CRM 5.0 Netweaver-2004S-SR2, facing below errror.
Error when processing your request
What has happened?
The URL http://hllsap44.in.u1609.unilever.com:1080/sap/bc/bsp/sap/crm_bsp_frame/mainDH.do was not called due to an error.
Note
     The following error text was processed in the system CD2 : The current application triggered a termination with a short dump.
     The error occurred on the application server hllsap44_CD2_00 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: BUILD_MODEL of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: CONSTRUCTOR of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: GET_MODEL_INSTANCE of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: SET_APPLICATION of program CL_CRM_BSP_IL=================CP
Method: DO_INIT of program CL_CRM_BSP_FRAME_MAIN=========CP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Soon reply will be appreciated.
thanks,'
Thakkar.

thanks For prompt attention towards my problem..
DUMP: Runtime Errors         MESSAGE_TYPE_X
Details:
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Short text of error message:
    Model for application set CRMD_CASE has been maintained inconsistently
    Long text of error message:
     Diagnosis
         After including the referenced application in the application set,
         at least one structure name is no longer unique.
     System Response
         An inconsistent model leads to termination.
     Procedure
         Contact your system administrator.
     Procedure for System Administration
          IMG -> Customer Relationship Management -> Layout of User
         Interface (People-Centric UI) -> Application Element-> Application
         Set.
    Technical information about the message:
    Message class....... "CRM_BSP_BLUEPRINT_DB"
    Number.............. 010
    Variable 1.......... "CRMD_CASE"
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
thanks,
Rakesh.

I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?

I cannot update my iPad and notes it cannot be updated due to unknown error (6). I have not yet updated my Macbook to Yosemite (which I do not intend to do so yet) so would this be the problem and if so, how can I update the iPad?
Thanks,
glhiker

Hi glhiker,
I understand that you may be having some issues with your ability to update your iPad. Here is an article that references your error code and can help you take some steps to resolve it:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-us/TS3694
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

TS3212 im trying to reinstall but will not allow, due to an error 7, itunes helper not installed correctly,i have tried several times, but will not allow me to install, i have used itunes for years but now cant use it, can you help

i have tried to reinstall itunes because it is saying i cant use my itunes due to an error 7, itunes helper not installed correctly, please reinstall, i have tried several times but still not allowing me to use, ive never had this problem before in all the years i have used itunes, i have gone through all the troubleshooting but still no access, can you help

Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Your file could not printed due to an error on 6., it's not printing Excel files only

Similar Messages

Maybe you are looking for