Your hard disk does not have enough space.

On running software update I am presented with this error message. Get info on the HD however says that I have 611.3 MB free.
Any thoughts?
OS X 10.6.2 on a 2GHz iMac

Hi,
I have 611.3 MB free.
If you only have 611.3 MB free disk space that is NOT good. I wonder if you meant to type GB?
If not..
Go here for help to Free Up Space on Your Startup Disk
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
Carolyn

Similar Messages

  • Software Update reports...Your hard disk does not have enough space

    << Your hard disk does not have enough space-3 B is required to download and install the checked updates. Extra space is required for the optimization process. To free up space, remove files from your startup disk, then try again.>>
    I've got 127GB free??!!

    I ran the Disk Utility and it said that "The volume Macintosh HD appears to be OK." I tried to proceed with my software update and it still says I dont have enough space. I have 159.7GB availible and the error message says I only need 3.75GB of space. What do I do now?! Thanks in advance for your help!

  • How do I fix Your hard disk does not have enough free space?

    How do I fix Your hard disk does not have enough free space?

    Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the sidebar of a Finder window, and open the Info window. How much space is Available? Specify gigabytes (GB) or megabytes (MB).

  • Hard Drive does not have enough space/error message

    Hello: I am new to Mac but have been having trouble with my iMac for a while. I can no longer download my software updates. I have an error message that states "Your hard drive does not have enough space" - 5.7 GB is required.
    I only have a 1 GB machine. What am I doing wrong?
    When I go to my Macintosh HD icon on the desktop, it says at the bottom of that window that I have 495.9 MB available.
    The error message tells me to go to the Startup file to delete items. I go there, but there's only two files. I do have music/photos/but I do not understand what's going on with my computer.
    In addition, it turns itself off often, for no apparent reason. Any ideas?
    Thanks!
    J.Renee

    The error refers to space on your hard drive, not memory. Unless you've mis-typed, if you have only 495.9 MBs free on your hard drive then you are definitely out of space. If you continue operating with so little free space you are risking a catastrophic loss of data.
    To free up space you will either need to delete unneeded personal files or copy some of your bigger files off to an external hard drive then delete them from your internal drive. Alternatively you can replace the internal drive with a larger drive.
    You should maintain no less than 15 GBs or 15% of the hard drive's capacity as free space whichever is greater.
    If you meant to type 495.9 GBs then you may have a corrupted disk directory. Try the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • Hello, Trying to run Bootcamp on my 15" Macbook Pro (Maverick).60 gig available on my computer's hard drive and 250 gig on a separate hard drive that I have attached which is single partitioned. Keeps saying "The startup disk does not have enough space"

    Hello,
    I'm trying to run Bootcamp on my 15" Macbook Pro (Maverick). I have 60 gig available on my computer's hard drive and have 250 gig on a separate hard drive that I have attached, which is single partitioned (MS-DOS FAT). It keeps saying "The startup disk does not have enough space, you must have 28 gig of free space available" Does anyone know what I'm doing wrong? Any help would be much appreciated.

    Thanks for the advice Bob The Fisherman. I'm just reading what turbostar has kindly written and it appears that perhaps, if I take advice from you both, I need to free more space up on the computer's hard drive?
    With the external hard drive; would it be advisable to defragment? Know of any defrag freeware for Mac OSX?
    Many thanks to you both.

  • I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

    Here's the story...
    I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
    I decided to reinstall windows.
    I deleted the windows partition using BootCamp.
    Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned  You must have at least 10 GB of free space available"
    After reading several posts on this forum I decided to defrag the hard drive and try again. 
    The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
    Any suggestions?
    Also, I tried repair disk and repair permissions
    Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)"  Could the 32-bit requirement be an issue? Is lion 64-bit?

    Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
    You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
    Get an empty external hard drive and clone your internal drive to the external one.
    Boot from the external hard drive.
    Erase the internal hard drive.
    Restore the external clone to the internal hard drive.
    Clone the internal drive to the external drive
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive and click on the downward pointing arrow button.
    After startup do the following:
    Erase internal hard drive
    Open Disk Utility in your Utilities folder.
    After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.  Do not quit Disk Utility.
    Restore the clone to the internal hard drive
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the internal hard drive. Source means the external startup drive.
    Note that the Source and Destination drives are swapped for this last procedure.

  • "Start-up disk does not have enough space to be partitioned"??

    Hi there, I hope someone can help.
    I've been using bootcamp for a couple of years but recently it has started to play up so I decided to reinstall a fresh. I went into OSX and ran "boot camp assistant" and deleted the partition and start again. For some reason when I try to go though "bootcamp assistant" to set up windows xp again I get an error saying "Start-up disk does not have enough space to be partitioned - You must have 10g of space available" But I check my space available I have 23.5gb free. It's driving me nuts! :/
    Cheers, Mark

    It's possible that your drive is sufficiently fragmented that Boot Camp Assistant cannot allocate enough contiguous space to set up the partition. It's also possible that it's simple a directory issue. I would start with repairing the hard drive:
    Repair the Hard Drive
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    After restarting per the above try using Boot Camp Assistant to allocate a partition. If it still complains then you will need to defragment the drive. You can do that as follows:
    A. Clone using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4.Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive.
    Source means the internal startup drive.
    B. Boot from the clone.
    Restart the computer. After the chime press and hold down the OPTION key until the boot manager screen appears. Select the icon for the external drive and click on the large downward pointing arrow button.
    C. Use Disk Utility to erase the internal hard drive.
    D. Restore the clone to the internal hard drive.
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4.Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the internal drive.
    Source means the external drive.
    *Note that the Destination and Source drives are reversed when you restore the clone from when you made the clone.*

  • My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive

    My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive.  The hard drive has been in service for almost two years performing this function with no sign of failure.  How do I adjust time machine perameters?

    The only way to limit the size of the backup is to exclude data from the backup, which you can do in Time Machine preferences.
    If you use multiple browsers, have you tried clearing your browser caches? However, that's just a stop gap if it works. You either need to limit what you backup or get another drive.

  • "The startup disk does not have enough space to be partitioned?" WHY!??

    I"m trying to intall windows 7 on my Macbook air  OS X 10.6. When i enter bootCam i get this error "The startup disk does not have enough space to be partitioned" . It says I need 10GBs of free space, even though I have 500GBs of free space on my drive external hardriver.
    I did my research, and a lot of people are saying to use idefrag and defrag the hardrive, which i did. I also verifed disk permissions and repaired disk permission and all the other stuff.
    What should i do? Apple hass the shittiest service. I spend $1100 bucks for something and i don't even get support without paying? to me, that's BS. so if anyone could help i would greatly appreciate it.

    Thanks Bob.
    And now to close this thrilling episode we will sing the "Dragnet Theme Song". All together now.....
    “Dum De Dum Dum…”
    “Dum De Dum Dum Dum”

  • The startup disk does not have enough space to be partitioned

    I have a custom upgraded Mac Mini (from 1.6 Core Duo to 2.33 Core 2 Duo & 64GB SSD - a fast little machine!) Under Leopard 10.6.6 & could create a BootCamp partition. Now after a reformat & upgrade to 10.6.7, BootCamp reports, "The startup disk does not have enough space to be partitioned". BootCamp says it needs 10 GB free space. The Finder says there is 23.4 GB available.
    Has anyone else run across this?

    Backup. Format. Restore.
    Windows 7 needs 40GB+
    HFS needs 20GB/20% free space to function.
    64GB is fine -- but just one OS, not two. 
    you might squeeze OS X into 30GB if you move and trim a lot.
    Windows 7 SP1 32-bit - the updates take 9GB of space (temp) on top of 20-25GB plus you'll need to disable page, hibernation, not install programs, and leaves little for TRIM and Garbage Collection.
    When Windows gets too low, you can be blocked from login or runnng.

  • HT1338 my startup disk does not have enough space

    When I try to update I get a message start up disk is full.
    What needs to be done? and How do I do it step by step?
    Any help is appreciated Thank you

    Freeing Up Space on The Hard Drive
      1. See Lion's Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • HT3275 Time Machine says my external hard drive does not have enough

    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.  I recently added memory, which may confuse Time Machine into thinking it is a new computer.  How can I erase old backups and complete this one?

    Walter Goodman wrote:
    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.
    See #C4 in Time Machine - Troubleshooting. 
    If that doesn't clear it up, how much data is on your Mac?  If TM is only trying to back-up 34 GB, it should be able to delete old backups to do that (assuming you're running Lion).
    It sounds like your backups may be corrupted.  Try to repair them, per #A5 in Time Machine - Troubleshooting.
    I recently added memory, which may confuse Time Machine into thinking it is a new computer.
    If that's all you did, no.  
    How can I erase old backups and complete this one?
    Just erase the drive per #1 or #2 of Using Disk Utility.

  • Time machine says restore target does not have enough space, but not true

    I have a PowerMac G5 Tower with Dual 1.8Ghz, 3GB Memory.
    The internal system disk is a WD 1TB(931.4GB) disk, but it has serious volume structure errors that are not recoverable with First Aid or Micromat TechTool. The 1TB disk was only about 1/3 full(~350GB used).
    Fortunately, I have been using time machine since July, using the exact same type of disk(WD 1TB), which is external..
    I installed another external 1TB that is exactly the same as the original system disk(WD 1TB - 931.3GB).
    I am able to select the backup source of the original disk from the time machine disk, but when I select the destination(new 1TB disk which is completely empty and reformatted), I get the following error:
    -"This volume does not have enough space to restore your system"
    I don't get it.....the original and new disks are exactly the same size. In fact the time machine disk is also the same WD 1TB disk. Realistically, only 350GB should only be needed anyhow...
    Please help....
    Thanks,
    Phil

    Apple phone support recommended that I install Leopard on the replacement disk, boot from it, then use the 'transfer data from time machine backup option'. This worked, but takes an hour longer because I have to install an OS. I am in the process of transferring 337GB of data to the new disk using this method(system is estimating this takes about 8 hours, so I am sending this note before it completes). This further verifies that there was plenty of space on the 1TB replacement, despite the error message.
    The new replacement disk I chose was an internal Seagate SATA disk. I was wrong in the previous note, the original internal system disk that had the volume corruption was also a Seagate SATA disk, not WD(though, the external 1TB was a WD). I did duplicate the bug mentioned in this bug with this disk before I installed the OS, so the problem had nothing to do with Seagate vs. WD, or internal vs. external. I booted from the replacement, then used the setup assistant to transfer data from a time machine backup.
    In summary, there definitely is a bug in the time machine restore option: Time machine reports that there is not enough space to recover, despite the fact that it had a full 1TB clean, and newly reformatted space. I duplicated the error at least 6-7 times, during the course of troubleshooting, with different replacement 1TB disks(WD and Seagate), Internal/External disks, Firewire, USB, and SATA connect.
    This is very nerve-wracking, as the restore is the major reason we do backups. How could apple have missed this one?
    For what it is worth, I spent ALOT of time on this, because I also ran into the bug that WD external disks(firewire and USB) are not bootable on Power PC systems(this is of course a WD issue....).
    Phil

Maybe you are looking for

  • How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

    How to resolve Error  "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

  • Can I save the filename as a keyword on importing?

    I'd like to automatically save each photo filename as a keyword for that photo, so if the file name is changed later through different versions it retains the original filename within its EXIF information to identify it, preferably while importing it

  • Connecting a second PC

    I'm trying to connect a second PC (DELL D630) to my Airport Express. I can see the network and am asked for a network key. I have tried to enter the Hex equivalent I found in my Airport Utility. My network connection always shows as having limited or

  • Function module in background work process

    Hi All, i'm using trfc for processing FM only in background work process CALL FUNCTION 'FUNCTION_MODULE' IN BACKGROUND TASK but when i execute FM it's occupying two work process one is dialog (running current FM )and another one is background( runnin

  • Capturing errors while connecting to Queues

    Hi I have a BPEL process which polls on Weblogic queues and fetches the message whenever the queue has one.Am using JMS Adapter for the same. Just wanted to know whether any error will be thrown when the queue is down in the log file. I have checked