Your instructions for creating new bookmark folders do not work on my computer.

I have followed your instructions to the letter for Making new bookmark folders. But, when I hold down the "Ctrl" key on the Mac while clicking on the folder which will contain the new folder, I do not get a "New Folder" option to select. Instead, the window defaults into the regular Google window where I would type in a word or words to search for something on the web. Therefore, no new folder window appears for me to type in the name I want to create for the folder. What am I doing wrong?

if your Air had died from lack of power, and since then ALL remaining power drained, then you may encounter a fault at charge.
Sounds as if you have the correct charger, but no indication of charging or any powering on.
Contact Apple for in shop diagnosis about your incapacity to charge your Air,...and I assume also inability to power on your unit.
http://www.apple.com/batteries/notebooks.html
"If it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge."

Similar Messages

  • I cannot create new bookmark folders

    When I try to create a new bookmark folder, the option appears gray in my toolbox and won't let me use it. I can't seem to create new folders though I can use old ones.

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • New bookmark folders do not stay

    Every time I create a new bookmark folder in safari and close Safari its gone

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Have followed instructions for displaying Version number. Does not work. I believe "Firefox button" means the gold & blue globe? No "Help" button. Can find no reference anywhere to version number.

    I believe that I have installed v.5 but can find no confirmation anywhere.... till now, when your "educated guess" shows v.5.0.1. Please give me concise instructions for displaying the version number. (For most software packages, "About" works... but not in this case.)
    Thanks.

    I can't think how '''cor-el''''s first advice went wrong. For Windows there is no difference between Fx5.0 and 5.01
    Just to be really sure you can do -
    *Firefox orange button>Help>Troubleshooting Information lists your Fx version, or
    *Options>Advanced>Update>Show update history(little box at the bottom).

  • Folders that I had previously created and put bookmarked sites in have disappeared and Im unable to create new folders for sites I want to bookmark. I've checked the support info and it doesn't say anything about creating new subject folders?

    Bookmark folders that I had previously created have disappeared so I can't access any of my bookmarks. The process I used to create new subject bookmarks doesn't seem to be there anymore. The apple support doesnt mention creating new bookmark folders or what to do if you lose your bookmark folders.

    Hi,
    As you just upgarded to Windows 7, please make sure SP1 is also installed on all systems and install the following hotfix rollup for Windows 7 SP1:
    An enterprise hotfix rollup is available for Windows 7 SP1 and Windows Server 2008 R2 SP1
    http://support.microsoft.com/kb/2775511/en-us
    There was a known issue on Windows 7 which affected shared folders, that newly created or deleted files are not reflect in network folder immediately, which seems similar to your error. If issue still exists after SP1 and hotfix rollup please help confirm:
    1. If this issue occurs only on DFS folder in accessing with \\domain.com\namespace. Could you reproduce the same issue in accessing \\server\sharefolder?
    2. Will the same issue occurs after disabling Offline Files if it is enabled. 
    If you have any feedback on our support, please send to [email protected]

  • Using instruction for creating field catalog to archive object "MM_MATNR"

    Hi all,
    I need a using instruction for creating a new field catalog to archive object "MM_MATNR". I'd like to create a field catalog using some fields of tables mara, makt, mvke and marc.
    Thanks for your help!

    Hi,
    Go to following link;
    [Material Master Archiving|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f75a80-867f-2d10-7aa6-ac164e43e89f?quicklink=index&overridelayout=true]

  • How to create new file folders?

    I'm can no longer create new file folders. Can someone help me? I've tried everything.

    Anice, welcome to the forum.
    When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Access Denied for creating new folder

    Hi friends,
    When i tried to create a new folder under shared folders in catalog as a weblogic user, i couldnt get a option for creating new folder. But i have that option enabled in the My folders area.
    Im not sure why the create folder option is not enabled for the weblogic user in the shared folders.
    Im on OBIEE 11.1.1.7 and for a workaround i referred the below link
    https://forums.oracle.com/thread/2520389
    But i followed the steps mentioned in the above link, but not succeeded still facing the same create folder privilege issue under the shared folders for the weblogic user.
    Kindly suggest me your approach for solving this issue.
    Thanks
    Regards,
    Saro

    Hari,
    Restart the services (weblogic and BI) you should see it I have observed same kind of behavior in 11.1.1.7.0 (Admin tab missing and No Permissions icon for weblogic user) dont know exact reason
    Restart is not a solution but will see if you are able to see or not
    Thanks,
    Saichand

  • After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

    Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

    Hello Victor.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • Need instructions for creating T61 XP backup media

    Can you direct me to instructions for creating the backup media (DVD preferably) for the existing 4GB backup partition on my T61 running XP?  It is intact, and I can boot into it, but I'd sleep a little better if I had the option of booting from external media.  I'm aware of the advice to call and purchase this media, but I would prefer to just make it myself, if possible.  
    Thanks!
    Moderator Note; post moved to start new thread, subject edited.

    I don't recall the step by step, but there is a menu item in the lenovo section you can use to burn recovery media from within windows. If I'm not mistaken, it can only be used once, however if someone already burned a set you can still restore from the harddrive and after restored you will again be able to burn one copy of recovery media.
    However, I'll give you my own personal opinion on this. When you install from this recovery media you'll have an outdated operating system. The T61 recovery disc was made in 2006 or 2007 and after you install it you'll need to install the latest service pack, then you'll probably want to replace all the drivers and all the lenovo apps that are also outdated. You're going to end up replacing nearly everything, plus you're going ot have several redundant copies of all this outdated stuff taking up space. My preferred method is to use a windows setup disc that has the latest drivers and critical updates integrated, then go online and download the latest drivers for your hardware and as much or as little of the lenovo products that you want on your system. You then save an enormous amount of harddrive space and have a computer without all the bloat and it all gets done in a fraction of the time. The last time I installed from a factory restore disc set it took hours, then several hours more to replace everything with updated versions. 
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one

    Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one

    Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
    You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

  • Creating New Bookmark Programmatically in Acrobat v9

    I want to programmatically create new bookmarks in Acrobat v9.
    For v7 the code I'm using is app.MenuItemExecute({cName:"Split Bookmarks",cParent:"Edit",cExec:"brk(this.bookmarkRoot);",nPos:1}).
    What has this been updated to in v9?
    Thank you.

    Sorry, I sent the wrong line of code.
    Has this command been updated for v9:
    app.execMenuItem("NewBookmark")
    When I run the below code Acrobat says there is an internal error.
    I'm assuming the issue is "app.execMenuItem("NewBookmark")".
    function brk(splitbm)
    // * is the authors choice for the split character, you may change it
    if (splitbm.name.indexOf('*') != -1)
    split(splitbm);
    //split if the bookmark name has the ^ charater
    if (splitbm.children != null)
    for (var i=0;i< splitbm.children.length;i++)
    newbrk(splitbm.children[i]);
    // split all the children bookmarks of mybm
    function split(bm)
    var bmname=bm.name;
    var splitat=bmname.indexOf('*');
    // The user can change the * , remember to change the previous function as well
    var topname=bmname.substring(0,splitat);
    var botname=bmname.substring(splitat+1,bmname.length);
    var thisdoc=bm.doc;
    bm.execute();
    app.execMenuItem("NewBookmark");
    var thisdoc=bm.doc;
    var rootlen=thisdoc.bookmarkRoot.children.length;
    var newbm=thisdoc.bookmarkRoot.children[rootlen-1];
    newbm.name=botname;
    bm.name=topname;
    // make all [childbookmarks of mybm] newbm's children
    if (bm.children != null)
    var endpos=bm.children.length;
    for(a=0;a<endpos;a++)
    newbm.insertChild(bm.children[0]);
    //make newbm mybm's child
    bm.insertChild(newbm);
    app.addMenuItem({cName:"Split Bookmarks",cParent:"Edit",cExec:"brk(this.bookmarkRoot);",nPos:1});

  • FM FOR CREATING NEW CONDITION RECORDS FROM INPUT FILE

    Hello vikas,
    I need to develop a interface program FOR CREATING NEW CONDITION RECORDS FROM INPUT FILE.
    Is there ay function module to update or create the condtion records,
    if u have any example interface program to update conditions records please send me.
    regards
    ram.

    This must be your compiler output.
    Basically, it is telling you two things that are wrong - in syntax.
    1. On line number 11 of the file RationalCollection1.java, the compiler expects a type identifier - that would be the object or return type such as int, String, boolean, etc.
    The reason it is doing this is probably due to your not ending a previous statement - like the "expected ';'" error statement. Check your code, make sure that methods (brackets) are closed correctly and there are no open statements (i.e. missing the semi-colen at the end).
    2. On line number 33 of the file RationalCollection1.java, the compiler expected the closing bracket. Thus, you didn't put the bracket where the compiler wants it.
    It appears that you have skipped some lines of code. Those lines are the problem, post them - post lines 30-36 and 9-15 so we can see what is happening around those error lines.

  • ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

    ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
    On right click nothing happens at all. I have  reinstall the ODI multiple times with right installer. issue persist.
    Please help.

    Hi,
    Did you use the generic installer or the win32 one ? You should use the former with Win64.
    You can also check that your version of Java is supported in the certification matrix.
    Regards,
    JeromeFr

  • Error message appear when creating new bookmarks

    When creating new bookmarks a pop-up window appear with the following info:
    unload: [Exception..."Component retyrned failure code:0x80004005 (NS_ERROR_FAILURE) [nsIObserverService.removeObserver]" nsresult:"0x80004005 (NS_ERROR_FAILURE)" location: "JS frame:: chrome://trustchecker/content/trustchecker.js:: anonymous:: line 955" data:no]
    The bookmark is saved at the bottom of the list but it is not possible to select folder to store bookmark. How do I fix this problem?

    I believe Trust Checker is part of Zone Alarm, to test this try disabling the Zone Alarm add-ons in Firefox to see if you can then create new bookmarks.
    To disable extensions:
    Click the Tools menu and then select Add-ons . The Add-ons window appears.
    # In the Add-ons window, click the Extensions panel. The list of installed extensions appears.
    # Click the name of an extension in the list to select it.
    # Click Disable to disable the selected extension.
    # Click Restart Firefox .
    If it does turn out to be the Zone Alarm extension causing the problem, check for any updates to Zone Alarm, if none you could report the issue to them.

Maybe you are looking for