Your macintosh does not have a supported SuperDrive

"please note that while you will be able to work with iDVD projects, you will not be able to burn a iDVD disc".
Can someone tell me how I can burn a disc? Many thanks

You will not be able to burn a dvd. You have a combo drive, not a super drive. A combo drive will read dvds but not burn them.
Your best option is to get an external dvd burner.
Good Luck...
Message was edited by: kjlake

Similar Messages

Macintosh does not have a Supported Superdrive

I have a 9 month old Macintosh IBook G4 using Mac OS 10.3.9
I am trying to burn my first DVD using the IDVD program. When I open the IDVD program I get a message:
Your Macintosh does not have a supported SuperDrive. Thus I can not burn a DVD.
Get anyone give me some tips about what this means? Seams like I basically have a new Mac (within 1 year) so I should be able to burn DVDs some way.
Thanks.
John Ellis

Some iBooks have a drive which will read and write CDs but only read DVDs. Check your specification either in the documentation or by pulling down the apple menu and clicking on about this mac and examining the hardware.

Macintosh Does Not Have Supported Superdrive

I have an eMac that came with a Superdrive from 2002. The only thing I did recently was upgrade to the most recent version of iTunes. I have been having problems burning DVDs.
I ran ONYX. It worked.
I then had problems.
I ran Onyx again and it didn't help. I burned to an external drive with 101 GB of space it worked.
I tried to burn again on the same drive and I got told MACINTOSH DOES NOT HAVE SUPPORTED SUPERDRIVE.
Is there a setting I haven't checked on.
Could the new iTunes be causing this problem.
Any help troubleshooting would be great.
Evan Jacobs

Sue
First of all thank you so much for the response. I have downloaded the doc (below) you suggest and am about to carefully read it to see if I can figure out what is going on.
Read this:
SuperDrive: Important Information About Using With
High-Speed Media
http://docs.info.apple.com/article.html?artnum=86130
Also, are you really running 10.2.x ? X = what?
Second, I am running an iMac Version 10.2.8 At least that is what it says in the About this Mac menu. Actually, it says Version 10.2.8 Processor: 800 MHz PowerPC G4
I got this whole set up in May 2002 , have done periodic updates and had absolutely no trouble burning DVDs until the past six months. That's when I used a no-name batch of printable DVDs. It's my first shot at printables. (The music CDs I've printed look terrific & play fine.) The DVD projects are turning out to be a pain, however. I thought the problem was the DVDs.
I did go into the console log via the System Profiler. Found this info regarding the failed burn:
iDVD: Burning to PIONEER DVD-RW DVR-104 A227 via ATAP1.
iDVD: Requested burn speed was max, actual burn speed is 7x.
iDVD: Burn started, Mon Jan 30 23:47:28 2006
iDVD: Burn underrun protection is supported, and enabled.
iDVD: Write (10), block: 800, count:32 ->3/11/05 Medium Error, L-EC uncorrectable error
iDVD: Burn failed, Mon Jan 30 23:47:56 2006
iDVD: Burn sense: 3/11/05 Medium Error, L-EC uncorrectable error
iDVD: Burn error: 0x80020060 The device drained its butter without burn underrun protection.
It's mostly Greek to me except that the burn failed. (That it did!)
I appreciate your help. I try hard to understand this stuff, but lately I seem to spend more time sorting out techie issues than editing.
Lee

Your account does not have access to the forums system.

Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?

Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

You are not allowed to continue because your account does not have the proper privileges

I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.

there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this:

Your computer does not have sufficient memory to perform this operation in Captivate

I am currently new to Captivate 4 and I keep getting this error message "Your computer does not have sufficient memory to perform this operation. Do the following"
I am trying to publish a large project were I recorded voice discussions over a power point presentation. The project is about 41 slides long and recorded using the video camera option. What can I do to stop getting this error message and publish this project. Help!

Hi,
Please check the memory available in your system.
Also please try the following -
- Open your Captivate project which you wish to publish
- Go to menu item Edit > Preferences
- In the Preferences dialog, go to Project > SWF Size and Quality
- Uncheck the checkbox Advanced project compression
Now try publishing the project.
Regards,
Mukul

What do you do if your iPod does not have a serial number?

What do you do if your iPod does not have a serial number?

Have you tried restoring to factory settings/new iPod via iTunes?
Are yo the original owner and have never jailbroke the iPod?
Does the iPod work OK?
The warranty is also void:
if any serial number has been removed or defaced from the Apple Product.

"Your device does NOT have a camera"

What's up with that??? My previous iPhone was just replaced with a refurbished one. It's a 3G and the camera is indeed there but since I had no camera icon on any of my screens so I installed CamZoom. When that app is launched, I get a "Your device does NOT have a camera" message. Have rebooted and restored. Any ideas or do I have to make my third trip to an Apple store? (that's getting very, very old)

The native Camera app cannot be deleted. But, there are two possibilities:
1) It's turned off in Settings > General > Restrictions. If so, enter your passcode and toggle it back ON.
2) You have an Exchange account on the phone. The Exchange server can be set to disable the camera, so if that's the case you'd need to delete the Exchange account or convince your IT department to remove the restriction.

Your computer does not have sufficient memory resource to publish your file

I just downloaded CP5 trial version to see what's new. Is it just me or is it really buggy?
I received 'Adobe Captivate has stoped working' half a dozen times but managed to convert a small CP4 project (35 slides not a lot of animation or voice over) and tried to preview it. I got the message 'your computer does not have sufficient memory resource to publish your file'. I'm working on a new laptop with 4 GB of ram and I still get that message even when I kill everything else and only have Captivate running. I'm working with Windows 7 on 64-bit OS. Has anyone else run into this? How much memory does CP5 draw?
Needless to say I won't be upgrading any time soon...
Best,
Aimee

Okay it happened again.
Here's the error:
And here is the CPU:
I would be happy to upload the project file if you provide me instructions about where to put it. However, I opened another project to test if it was just that project and I received the same error.

"Your computer does not have the hardware to run this software"

When I try to install Final Cut Studio, I receive the error "your computer does not have the hardware to run this software." I just purchased a brand new 13in macbook pro with 4gb of ram about 2 weeks ago. This computer is more then capable of running this software so what's the problem? How do I fix it? I just recently boot camped windows 7 on this thing just in case that matters somehow. Feedback? Comments? appreciate it...

final cut studio 5 I believe
There is no Final Cut Studio 5 (yet). The current version is Final Cut Studio 3, which includes Final Cut Pro 7. Final Cut Pro 5 is NOT compatible with IntelMacs. Version 5.1 was the first version to be compatible with IntelMacs.
-DH

Performance Update 1.0 "Your computer does not have eligible hardware" ?

i tried to do the apple Performance Update 1.0 update but when i double clicked the pkg file it says "This computer does not need this update." "Your computer does not have eligible hardware." why is it saying this and what should i do? just so you guys know i have a intell macbook pro 15" and ive been have overheating problems that disconnect me from the internet when it overheats and then i have to restart the computer to fix, and also my computer is real slow with alot of hanging beachballs since i upgraded to snow leopard. im hoping this update will solve these problems if i can figure out how to download it.
another thing i should point out is this update did not come up in the software update. i went to the Performance Update 1.0 page myself to download
Message was edited by: johnpalley

Yeah but what about the rest of us!
I have two Macbook Pros (Early 2008) with upgraded hard drives that didn't have this clicking (hard drive head parking) issue in Leopard but now do in Snow Leopard. Apple knows this is an issue, makes an update pretty much for every other model but this! I've called Apple Care and no one seams to have heard of this issue even though its all over the internet and they released an update to specifically address this issue!!! Come on Apple, if you going to attempt to address an issue do it for all the computers effected! What my $3000 spent a year and a half ago is no good and what... now you consider my computer obsolete?
*** - I say that since I've contacted Apple about this for the past 2 months, they come out with an update to fix the issue, I'm all excited only to find out my computer doesn't quality & my computer will now continue to pause for 2-4 seconds 100 times a day!!! Apple get it together... Oh and its the same hard drive that is BTO from apple but since I installed it (which your able per Apple) the hard drive doesn't have the custom apple drivers?

EA2700 - Your Computer does not have Networking Capability?!

I'm kind of a novice when it comes to networking and computer. I receently purchased a EA2700 for the house. I've managed to plug everything in the proper locations, got everything going and internet working on my PC with a wired connection. Everything was going smoothly until i put the setup CD in to setup the router. I ran setup and at the loading bar (0%) an error came up saying that "Your Computer Does Not Have Networking Capability". I'm using Nvidia nForce that came with the motherboard (to my knowledge at least). I can go on websites and also get to 192.168.1.1 BUT I just can't seem to get pass that networking capability error. I've also tried to update the Nvidia nForce driver but doing that caused my internet to not work at all. So I just rolled back to the previous driver which could get me online at least.
If anyone has any idea how I can fix this, please let me know cause I'm out of ideas and not quite sure what I need to do at this point. Thank you very much in advance.

Refer to the links below for steps on how to setup a router.
Setting up a Linksys router with Cable Internet service
Setting up a Linksys router for DSL Internet connection
Setting up a router with a Static IP account
Changing the Wireless Network’s Name (SSID) on a Linksys Router
Setting up WEP, WPA or WPA2 personal wireless security on a Linksys wireless router

Your computer does not have sufficient memory

This problem is already tracked in a couple of other threads but I wanted to start a new one where I have already implemented most of the recommended fixes but am still having a problem. When attempting to publish various projects, and with no particular consistency, I'll receive this error:
Your computer does not have sufficient memory resources to publish your file.
I always launch Cp5 as an Administrator
I always clear the cache
All projects have the following Preferences un-checked: Advanced Project Compression and Compress SWF File
I continue to reboot and re-launch until publishing inexplicably works.
Once a project is suceesfully published, attempting to do so again usually results in the same error.
After receiving the error, and attempting to publish again, Cp5 typically crashes
I am running Windows 7 with a 2.66GHz processor and 4 GB of RAM on a 32-bit system
Please advise on any fixes, solutions, work-arounds, or animal sacrifices that will help me out.
Thanks!

Rather than blame Captivate, this sounds to me like there's something in your project that might be causing instability.
I was having the same problem on one of my projects many months ago when I was working on the Cp5 beta program. It turned out to be due to having square braces [ ] in the Slide Notes area. (This was confirmed by Adobe techs after I sent them the project file.) Apparently there are some characters that should not be used in the Slide Notes area, especially if you use them in Closed Captioning. It was the fact that I had accidentally included a Notes line with square braces as a CC line that caused the error. So I removed all square braces, replaced them with pipe characters, and haven't seen the issue since.
Some other questions in case the above doesn't work for you:
Is this project perchance one that started life in a previous version of Captivate and you upgraded to Cp5, or was it created from scratch in Cp5?
Does it do this in just this one project or on any Captivate 5 project you create from scratch?
How big is the project?
Does it contain any Flash animations that might contain AS2 code or that were published as AS2 (even though they only contain stop() actions)?
Have you tried copying groups of files from this problematic project over to a fresh new blank project to see if you can replicate the issue there. As soon as you see the issue reappear, try deleting out the last group of slides to see if that removes the issue again. By a process of elimination you may be able to find the actual slide/s that are causing the issue, and then keep deleting items off the slides until you are able to find the actual object. I've found corrupt objects this way on a few rare occasions that Cp projects became unstable.
Hope this helps,
Rod

HT1539 How do you redeem Digital Downloads if your device does not have a DVD drive?

How do you redeem Digital Downloads if your device does not have a DVD drive?

If the redemption comes only on a disk, then you will have to get access to a DVD drive, either by borrowing or purchasing one, or by using the Remote Disk feature if you have another computer available that does have a DVD drive.
Regards.

Mingw32-sdl_image does not have jpg support

Hello,
I'm trying to cross-compile some basic SDL programs to Windows. I've tried installing mingw32-sdl_image from the AUR multiple times, but when I compile my programs for Windows and then run them under wine they give the error (via IMG_GetError): "Unsupported image format". I'm pretty sure I'm linking everything correctly. Here's my makefile:
CFLAGS = -Wall -pedantic -Werror
LFLAGS = -lSDL -lSDL_image
OBJS = init.o input.o graphics.o main.o
PROG = tutorial02.exe
CXX = i486-mingw32-gcc
# top-level rule to create the program.
all: $(PROG)
# compiling other source files.
%.o: src/%.c src/%.h src/defs.h
$(CXX) $(CFLAGS) -c -s $<
# linking the program.
$(PROG): $(OBJS)
$(CXX) $(OBJS) -o $(PROG) $(LFLAGS)
# cleaning everything that can be automatically recreated with "make".
clean:
rm $(PROG) *.o
Compiling this for Linux with a similar makefile (i486-mingw32-gcc is changed to gcc) seems to make an executable that can display the image fine. I figure the problem is that mingw32-sdl_image doesn't have jpg support built in or somehow it isn't linked when it's configured and compiled. Does anyone know how to fix this?
Thanks in advance,
Isaac

./configure for mingw32-sdl_image
./configure --host=i486-mingw32 \
--prefix=/usr/i486-mingw32 \
--enable-static \
--enable-shared \
--disable-png-shared \
--disable-webp --disable-webp-shared
./configure in extra/sdl_image :
./configure --prefix=/usr --disable-static
You could try changing the mingw32-sdl_image pkgbuild, or contact the maintainer to find out why they disabled png and webp .

Your macintosh does not have a supported SuperDrive

Similar Messages

Maybe you are looking for