Your MobileDevice framework is too old. Please install iTunes 10.6 or later, Your MobileDevice framework is too old. Please install iTunes 10.6 or later
Am getting the above when trying to run the iPad Configurator. OS X 10.7.3, iTunes 10.6 all installed, no updates showing as available.
I have:
$ cat /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/Resources/v ersion.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>BuildVersion</key>
<string>8</string>
<key>CFBundleShortVersionString</key>
<string>507.6</string>
<key>CFBundleVersion</key>
<string>507.6</string>
<key>ProjectName</key>
<string>MobileDevice</string>
<key>SourceVersion</key>
<string>5070600</string>
</dict>
</plist>
Any ideas please?
Thanks,
Ceri
I know this is an old post but I just had this issue when I updated Configurator. I have Xcode installed and updated Command Line Tools to get rid of the message in Configurator.
Similar Messages
-
My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.
After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao. -
"Quicktime is not installed or is too old of a version (39::0)" error when trying to open CS 6 psd f
I am editing some Sony EXCAM footage and decided to apply a Photoshop CS 6 filter to a potential background plate for a green screen shot. The EXCAM footage (HD, 1920x1080, 24p) plays fine in Quicktime player and plays inside Photoshop as well once imported. But after applying the filter -- which also plays properly in Photoshop -- and saving the composition as a psd file, I then try to open the psd file in After Effects, I get an error message that says "Quicktime is not installed or is too old of a version (39::0)." I have considered rendering the Photoshop comp as video, but I notice that unless I want an image sequence (which I don't) my export options are limited to a couple of animation flavors or jpeg 2000. I see no place in the Photoshop render dialogue box to access Quicktime settings and choose another codec. (An Apple Pro Res proxy might work just fine, for example.) So I'm making this a Photoshop question because I think there's something about Photoshop that is making the file unrecognizable to After Effects. After Effects does import a single frame of the image with the filter applied. (Yes, I am converting the video to a smart object before applying the filter.) Any thoughts?
Hi hertz. I was informed by Todd Koprivka (pardon if I got the last name wrong) of Adobe that owing to different speeds of development, some interactions between Photoshop and After Effects are not working as they once did. One of the programs has to catch up to the other. So, no, you can't open a video saved as a psd file in After Effects pending new developments. And while you can export your Photoshop video, it doesn't seem you have access to all your system installed codecs. I can't remember what is available at the moment. I think animation and maybe photo jpeg -- don't quote me. But it does seem that until they get the programs back on the same page, you do have to use one of those export options and then import the result as footage into AE. (Please note that I am playing this back to you from memory and may not have the details quite right, but I think I'm telling you the gist. You could try tracking down Mr. Koprivka at Adobe and emailing him. He seems to be some sort of community liason for AE.) Sorry the news isn't better -- especially as you have updated all the software and the problem apparently hasn't been addressed. That's disappointing. The workaround I'm suggesting is time consuming and, of course, you are baking in your Photoshop work. But if that's OK and you have the time for the export, you can eventually get your stuff into After Effects.
-
I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.
If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
BOOT DEVICE NOT FOUND - PLEASE INSTALL AN OPERATING SYSTEM ON YOUR HARD DRIVE
HP G6-2212SA LAPTOP ( 2 YEARS OLD) BLACK - WINDOWS 8
I HAVE RUN THE MEMORY TEST PASSED
RUN THE HARD DISK QUICK CHECK - PASSED
RUN HARD DISK EXTENSIVE TEST - PASSED
I HAVE BOUGHT A NEW HARD DRIVE, INSTALLED IT AND RUN ALL THE SAME TESTS WITH ALL THE SAME PASSED RESULTS. I BELIEVE THAT THE PROBLEM IS NOT THE HARD DRIVE, SO I HAVE TAKEN THE NEW ONE OUT AND PUT THE OLD ONE BACK IN, AND HOPEFULLY BE ABLE TO GET A REFUND IF I SEND IT BACK.
I HAVE FOLL0WED INSTRUCTIONS ON THIS FORUM TRIED MOST THINGS STILL GET THE SAME MESSAGE.
I HAVE BOUGHT A WINDOWS 8 RECOVERY DISK OFF EBAY, TRIED IT SEVERAL TIMES AND DIFFERENT WAYS BUT WILL NOT LOAD UP
PLEASE HELP AND ADVISE AS IM IN A DELEMA
DARRENHi @Darren104
Welcome to the HP Support Community. I saw your post regarding the Boot Device not Found error message. This HP document Resolve Boot Device not Found Error Message will show you how to reset your BIOS. This will force the BIOS the look at the hardware and it might see your new hard drive. Another reason that it might not be seeing the hard drive is because there is no bootable operating system on the hard drive. You might need to look at taking it out and installing an operating system on it via another computer.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.If you want to just extract the playlists from your iPod, plug it in iTunes. When it appears under devices, right->click on it and choose Export Playlists. Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
Help please how do I install Apps from my old Apple ID ?
Hi
I have two Apple ID wold like to install an Apps from my old Apple ID.
Please helpGo to your System Preferences, scroll down to iTunes and App Stores. Tap your current Apple ID, and press "Sign Out." Then go ahead and sign in with the account you bought the apps on.
Go to the App Store, and go to Updates. Once it loads, you can navigate to your previous purchases, which by tapping on the little iCloud logo, you can download.
Cheers! -
I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed. -
hello sir
i have mac os x lion and A
fter upgrading to Lion i can't instal the face time app its type ( FaceTime can’t be installed on “Mac” because the version of Mac OS X is too new. ) can anyone help me please .
notes : on snow leopard the face time was work normally but i delete it the app i thought it will work after i reinstall itLion comes with FaceTime. Look in your dock or in the Applications folder.
-
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?
yankeecat wrote:
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book.
There is no such Trojan or other malware known today that will do that using OS X nor has there ever been one. The most probable explanation is that somebody hacked into your e-mail account on the server, so you should change that password to something stronger right away. If it had come from your Mac then there would almost certainly be copies of those messages in your Sent Mail mailbox. -
im having problems installing the newer version of itunes, and removing the older one, im basically itunesless because it keeps on telling me i need the itunes64.msi files which i cant find on my laptop. please help
You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I have installed and reinstaled Flash. When I go too your test site a Star pops up and it isn't work
I have installed and reinstaled Flash. When I go too your test site a Star pops up and it isn't working. I need some help with this.
Welcome to the Adobe Forums.
The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information that you haven’t already (where applicable):
• Adobe product and version number
• Operating system and version number
• Browser and version number (where applicable)
• The full text of any error message(s)
• What you were doing when the problem occurred
• Screenshots of the problem (if possible)
• Computer hardware, such as CPU; GPU; amount of RAM; etc. -
i have an old mini running os x 10.4 . i'm about to upgrade to 10.6 but have a ton of music and recording software installed and need to know if it will affect any thing i have installed . does newer garageband work with older gband files ?please help ??
Sorry about that, yes, 10.5 and 10.6 on Intel can run Firefox 4.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
You could install Firefox 3.6 over Firefox 4 (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself! -
After installing ios5 and having had to change my apple id to e-mail address I am unable to download updates as they were purchased under my previous id and it will not allow me to get back into the old id Help please.
Make sure you enter your new Id in settings/message, settings/facetime. ANy content that you downloaded with the old ID is forever linked to that old ID and if you have apps that were downloaded with the old ID and you want to update them you can only do that with the old ID. You could delete those apps and downlad them again ( and pay for them if they are not free apps)
-
My Mac is a 2.8 GHz Intel Core i7 OS X 10.6.8 - wanting to download Mavericks but install goes to pause with no status info. Is my Mac too old for upgrade?
If it were too old, the App Store wouldn't download it.
Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Maybe you are looking for
-
To play games and cd's etc do i need to buy an apple superdrive
do i have to buy an apple usb superdrive to use cd's
-
Ok, so an assignment is due today. I am up to the last part and what you need to do it make a custom graph, I have an iMac (OS X Yosemite) and I need to make a table like the one showed on the image I attached. If you look on the right hand side of t
-
I want to ask apple company when they release ios 7 without apple id active like ios6
dear apple now many people include me have problem with apple id for ios7 when you release by without active with apple id maybe your product can not use else anymore and i heard complain from customer to me he angry with company that make them diffi
-
Unable to connect to EBS database installed on Solaris OS
Hi, I deployed web service on Glassfish server which is installed on Windows Server Machine. I am unable to communicate to EBS database installed on Sun Solaris machine. But I am able to communicate EBS database using same Web service deployed on gla
-
I cannot get my HP 6500 scanner to work right with my macbook pro when scanning. Any ideas?
I cannot get my HP 6500 Printer Scanner Fax to scan with my Macbook Pro. Prints fine but won't scan. Any suggestions.