Your opinion - suggestions about my website

I have published my website http://www.pcnetworks.gr (κατασκευή και φιλοξενία ιστοσελίδων) and I would apreciate your opinion and suggestions about the design of it and any ideas on how to make it more attractive. Thank you in advance

pcnw,
You might elaborate on the present use of colours, particularly the triple colours used on the first page at the top and at the bottom for the three levels, and also used elsewhere. In this connexion, you might consider designating a colour to each level and use that in the further pages, where the red appears for all as it is now, and to have a fourth general colour for other aspects/purposes.
The (final) colours chosen could reflect and give an impression of the levels: what they offer and what they require.

Similar Messages

  • Give me some suggestions about enterprise websites

    Recent very distressed and hope everybody can give me some advice sincerely. When you look at these websites at first sight，Can you give the first feeling？Theses websites involves in different industries，such as hardware industry,chemical industry, rubber industry, construction industry and so on!Each websites I will give you some keywords.The keywords in hardware industry are marine hardware, trailer parts, wrouht iron, scaffold, sand casting, hand tools and so on!Chemical industry:swimming pool chemical, ammonium nitrate, sea sault.Rubber industry:rubber seal.Consruction industry:granite countertops, paint tools,  storage bin.If you have any Suggestions, please don't hesitate to give me some Suggestions.Thanks!

    The decision of whether to use CLDC or CDC is made for you by the device you are programming for. If you want to write an application for a particular smartphone then you have to find out what configuration it is running and as far as I know all smartphones (no matter how powerful) will be running CLDC. The CDC is aimed at things like set-top boxes for televisions and other such devices that run from mains power for example.
    Within CLDC there are 2 versions, 1.0 and 1.1 and again the choice of which one to use comes from the device you are aiming for. The same for MIDP, which has version 1.0 and 2.0. As an example I am developing an application for a Nokia N95 and I know from the phone documentation that it is running CLDC 1.1 and MIDP 2.0.
    I've never looked at CDC to be able to tell you the differences but if you are starting development of a mobile phone application then you will want to look at CLDC/MIDP and you should never have to worry about getting it to work on a CDC emulator because you will never need to do that.

  • What's your opinion on the search function on the NI website?

    Hi all NI web goers:
    I give 1.5 of 5 stars to NI's search function. Most of the times I got very frustrated when searhing NI's website. It returns a lot of entries for my search, but either none of them are relevant, or there are about 10 duplicate links to the same page, and multiply that by the # of unique links you get, well, you get the idea.
    So, what's your opinion on the search function offered by the NI website?
    -Joe

    Not sure what this has to do with LabVIEW. I suspect the Feedback on NI Discussion Forums might be as good as place as any. This has been brought up before:
    http://forums.ni.com/ni/board/message?board.id=130​&message.id=3587
    http://forums.ni.com/ni/board/message?board.id=130​&message.id=3086
    http://forums.ni.com/ni/board/message?board.id=130​&message.id=3142
    http://forums.ni.com/ni/board/message?board.id=Bre​akPoint&message.id=3966 (thread I started along the same lines)

  • Interested in your opinion about PPBM7

    Bill and I are working on a new site and a new test. It looks like it will not take much longer and is nearly ready for CS6.
    We have invested lots of time in designing the new website and adding functionality and there is still as long way to go, but we are making steady progress. Note that the subscription module in not operational yet, the download file is not up-to-date, the script is not included, etc. but we would like to get your opinion on our progress and hear your comments. Everything now is only based on our PPBM5 results.
    Please take a careful and critical look at PPBM6, take a look around the site and consider the navigation, layout, logic, design and - most importantly - how easy it is to find the info you are interested in and the way it is presented. Please be critical, so we can take your considerations and suggestions into account.
    After you have looked over this site, you would help us enormously by filling out this survey: Click here to take survey. Note we have only a basic subscription which allows for 100 responses only, so you may be out of luck if you wait too long.

    STRONG OPINION - Put Benchmark Results/Detailed Results (full table) by itself and label it "Benchmark Results Table" and move all other items in Benchmark Results section to "Benchmark Results Statistics"
    Done.
    Benchmark Results/Detailed Results table features don't work at all in Internet Explorer (I have IE v9); works fine in Firefox, but many Win7 users will be using IE
    Try with the new template, it may work now. Still some cosmetics to adjust though.
    Would like to see new columns in Benchmark Results / Detailed results table: CPU die size (nm), # cpus (like in PPBM5), chipset (i.e. X79, C602, etc.), User Comments (i.e. so DeeDigital could explain why identical hardware went from score of 186 to 149), Disk Comments (i.e. many forum posts focus on where put scratch, projects, media, render outputs, etc.)
    That may be feasible when I get the parsing of Speccy.xml completed.
    STRONG OPINION - Menu design should be streamlined; This is not that large a site and When "Latest News" "Planning and Building" is up, I see 4 separate menus (at page top, Main Menu on Left, Latest News...All Pages on right, and Planning & Building a NLE System at lower left.
    Done.
    Suggestions to streamline:
    1) Only show "All Pages" for all areas; if you find you must have this level of sub-section, do it with a drag-down box at top and bottom of the section like many review sites do
    2) Have all menus at top; this is nicer too when someone wants to print something out
    Done.
    Need to clearly state what versions of CS the new benchmark is compatible with
    Will be done.
    Suggest adding a lifetime Platinum subscription option for say $100 or $150; that's the one I would select BTW if it were available
    Also suggest dumping the Bronze and Gold options; there too many options for new subscribers
    I'm looking into that.
    Update copyright to 2013 (i.e. bottom Methodology page)
    "Buy a subscription" should be "Select a Subscription" since entry level is free
    Remove the "We are volunteers!" banner to be consistent with new paid subscription fees; or, if the fees are purely going to internet fees, etc., explain that somewhere
    Done, but working on the template now for the footer.
    Font size selector is broken on Buy a Subscription page
    Suggest using www.ppbm6.com instead of www.ppbm7.com to reduce confusion (it seems that you also own this domain site)
    Will look into that.

  • What is your opinion about IDEs?

    I've heard different opinions about using IDEs like Jbuilder, Symantec VisualCafe, Microsoft J++...
    Some people think that to program in java using a simple text editor is a prehistoric and a very hard way and they prefer using IDEs.
    Other people think that IDEs are not good tools to program in java because they add a lot of unnecessary code and because you have more control for the code if you program all by yourself. These persons maybe think that the only utility of IDEs is their help.
    I would like to know all your opinion about this.
    Thanks!

    Hi,
    I think it depends on the context if one may use an IDE or not.
    There are 3 things to be considered:
    1) processor speed
    2) application type
    3) lazyness
    ad 1:
    If you want to use an IDE, you must have a powerful processor.
    In fact, all major JAVA IDEs are written entirely in JAVA.
    So a Pentium 3 or K7 and faster processors are advisable.
    ad 2:
    When you write servlets or small text based applications with only a few classes, an notepad like nedit for UNIX systems is in fact the best solution.
    A huge JAVA program with many screens (SWING or AWT) for instance cannot be easily developed with a small editor. Here an IDE should be considered as a must.
    (Unless you are really a hardcore Java specialist)
    The same approach can be applied to bean development.
    ad 3:
    IDE come with many pre-constructed classes and concepts. Developing a client/server or multi-tier application can be an easy task if you spent some money on an IDE.
    Other advantages of IDE are built-in tutorials and programming enhancements (when you type the name of an object the IDE shows you immediately all its methods for example). So if you are a beginner or one of those people that thinks that a programm cannot be done without development platforms like Microsoft Visual XXX, JAVA IDEs are a logical conclusion.

  • Please your opinion about this book

    I heard that this book is really good for beginers " How to program in java 5th edition by Deitel" can you please give my your opinion about this book ,.
    thank you.

    I have Java How To Program 6th edition by Deitel and it's good but i think they could have used a little more plain English in the explanation of java.

  • Poll : Your opinion about T430s or T431s

    Hello Everyone
    It has been a while since I decided to buy a laptop and I narrowed my 2 choices to : 
    T430s and T431s
    But yet, I can not decide between these two laptops, The T431s is pretty new and there are not a lot of reviews about it but the T430s has some good and bad reviews . What I like about T431s is the style, and trackpad . But I dont like the fact that the battery is not user replacable. 
    I want your opinion on T430s vs T431s
    I created a poll here : https://docs.google.com/forms/d/10Dp05hfFnACGuf0gyBEdGd2eD0LZqMVxEifIEk390uQ/viewform
    I really appreciate if T430s and T431s owners respond to the poll so I can make a better decision 
    I will post a link to the responses later 
    thanks

    This was a questions I asked myself. I originally wanted the T430s because of the fact that one has  DVD drive but realized that was not as important as battery life. If you have read the reviews on this forum and others the real battery life on the T430s seems to consistently be 3.5-4 hours. I think the extended battery  brings it up to a little over 7.5  in the real world a standar 4 hours battery life was a no no for me as My Thinkpad T43 I bought in 2005 had that battery life . Also the extended battery costs  $130 and drains faster than the regular battery. So in a year or two I would have to buy another one. That is when I switchd my eyes to the T431s. I believe  it is about 5.5 hours. That is good enough for me because I will a charger near by and again my first laptop had 4 hours and my refurbished Edge (desktop replacment) has less than 3.
    I just  priced a T430s and added the features that come standard on the T431s (HD+ screen, camera, and Intel wirelesss) the T430s comes out only $75 less than the T431s. And remember you have to buy an extended battery  for the T430s which costs more than $75.
    Trackpoint:
    I am buying this T431s when I got back to school in August. I will say that I am taking a risk. I played with one and the Trackpoint is definitely different. I am not sure if it is something I will get used to or if I will hate it and forced to get a mouse or use the trackpad. After I buy it through the school I will have 5 days to return it.  But from a modernization perspective (I plan on keepin this laptop for 4+ years) I wanted something better. I love thinkpads so if this change is inevitable might as well try it now. (I'll let you know if I hate it and switch back to the T430s.
    If I were you I would take advantege of Lenovo free return policy they are having. That way you can test out the trackpoint and if you don't like it  you can return it with no restocking fee.

  • I am looking for your suggestions about Netweaver Enterprise Portal

    Hi,
    I am Mallikarjun, having 3 years of experience in SAP - ABAP programming and also I am having enough conceptual knowledge on ABAP Objects & JAVA, even I am aware of Web Dynpro ABAP. Now I am planning to learn Netweaver Enterprise Portal, for that I am looking for your valuable suggestions and even I am expecting your help. Here I have some quarries:
    1.     What is the importance of Netweaver Enterprise Portal?
    2.     What are the different concepts of Enterprise Portal?
    3.     Step by step procedure to learn Enterprise portal?
    4.     As a developer (EP) what are the roles and responsibilities?
    5.     What should I learn to work as a EP Content developer?
    If you have any Enterprise Portal documentation or material, please you can share with me, it helps me a lot.
    Thanks & regards,
    Malllikarjun.

    Hi Mallik  ,
    The following r excellent websites containing PDF & PPT docs which will make u'r learning easier as a BEGINNER:
    EP BOOK
    http://searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
    EP Introduction
    http://en.wikipedia.org/wiki/Enterprise_information_portal
    EP Introduction
    http://www.sappoint.com/PHPWebUI/index.php5?menu=ConsultingEnterprisePortals&title=Consulting%20Services%20and%20Solutions%20-%20Enterprise%20Portals
    How to develop SAP Enterprise Portal with WebDynpro
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/15efce90-0201-0010-e8ae-f74055037139
    Migrating SAP Enterprise Portal
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4be0a6e3-0601-0010-6493-913104fc7468
    All Articles on SAP NetWeaver Portal
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/10f7a71d-d911-2a10-39b0-8a9f318c94ac?startindex=21
    SAP NetWeaver Portal How-to Guides for SAP NetWeaver 2004
    Portal How-to Guides for SAP NetWeaver 2004?prtmode=print
    SAP NetWeaver Portal eLearning Catalog
    https://www.sdn.sap.com/irj/sdn/portal-elearning
    AN EXCELLENT BOOK ON DETAILS OF SAP ENTERPRISE PORTAL
    http://searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
    Get ready for SAP ENTERPRISE PORTAL
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d5ca54c-0601-0010-56a0-812227d24327
    SAP ENTERPRISE PORTAL - PORTAL CONTENT
    http://www.sap.com/platform/netweaver/pdf/BWP_Portal_Content.pdf
    Beginning EP Development
    Beginning EP Development
    PORTAL(SAP LIBRARY)
    http://help.sap.com/saphelp_nw04/helpdata/en/a4/76bd3b57743b09e10000000a11402f/content.htm
    HOW TO PERFORM INITIAL SIZING OF ENTERPRISE PORTAL 6.0
    http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/01_Sizing_EP_60_init2.pdf
    SAP NetWeaver Portal eLearning Catalog
    https://webservice.sdn.sap.com/irj/sdn/portal-elearning
    SETTING UP U'R SAP ENTERPRISE PORTAL SYSTEM LANDSCAPE
    http://www.sappro.com/downloads/SystemDefinitions04.pdf
    Integration into the SAP Enterprise Portal
    http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
    Administration Guide
    http://help.sap.com/saphelp_nw70/helpdata/en/ec/171e3e7181b60ae10000000a114084/frameset.htm
    Themes and Permissions
    http://help.sap.com/saphelp_nw70/helpdata/en/26/3df46c0584cd4eb31e91aa7bcf1893/frameset.htm
    Installing and configuring the preview edition of EP
    Installing and configuring the preview edition of EP
    TRANSPORTING SAP NETWEAVER PORTAL CONTENT
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/ep%206.0%20sp2.0/best%20practice%20for%20transporting%20sap%20netweaver%20portal%20content.pdf
    SAP NetWeaver Portal How-to Guides for SAP NetWeaver 2004
    Portal How-to Guides for SAP NetWeaver 2004
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/ep%206.0%20sp2.0/sap%20ep%206.0%20integration%20using%20jsr168%20and%20wsrp.ppt#285,1,Slide 1
    CITRIX SOLUTIONS FOR SAP ENTERPRISE PORTAL
    http://www.citrix.com/site/resources/dynamic/partnerDocs/Citrix%20-%20SAP%20Business%20White%20Paper.pdf
    HOW TO INTEROPERATE SAP ENTERPRISE PORTAL AND IBM WEBSPHERE PORTAL SERVER
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4a3addc4-0501-0010-bfbb-9cdd29581adf
    installation
    Enterprise Portal 6.0 Installation
    http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N02_BB_InstallGuide_EN_US.doc
    Installing SAP Enterprise Portal 6.0 SP2     
    http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/02_Introduction_v1_final.pdf
    How to migrate from SAP Enterprise Portal 6.0 SP2 to SAP Netweaver '04
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/778ac2ee-0901-0010-61a9-a2e174996bd7
    Get ready for SAP Enterprise Portal 6.0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d5ca54c-0601-0010-56a0-812227d24327
    Mastering SAP Enterprise Portal 6.0 Application Development
    http://www.sap-hefte.de/download/dateien/1000/075_leseprobe.pdf
    Get u'r SAP Enterprise Portal 6.0 smooth start
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/48f4aa4c-0601-0010-4fb3-abc9042dac4b

  • What is your Opinion about Z10

    hi guys i'm going to purchase this device what is your opinion about it i want you to tell me about your experience
    thanks in advance

    Some of the good experiences with the Z10:
    * True multi-tasking
    * Great user interface with the peek and flow
    * The Hub (all your messages in one place)
    * Nice size handset & build quality
    * Excellent screen & sound
    * Removable battery
    * Connections: micro-USB, micro-SD, micro-SIM, micro-HDMI
    Rad Systems apps on BlackBerry World
    Follow on Twitter, Facebook or BBM Channel: C0006BB16
    Tips to improve your BlackBerry 10 battery life (and avoid overheating)

  • Please give me your opinion... about tools for develop web service

    If you would like to choose the tool for develop web service.
    what is the most important feature that you will consider,
    Please help me to order these topic from the most to the least
    a. creating web service
    b. creating web service client
    c. searching web service to UDDI registry
    d. publish web service to UDDI registry
    e. connecting to database management systems.
    f. license fee
    g.system requirements
    h. Installation procedures
    thank you very much for your opinion. I will keep your information for my research....
    :)

    Hi Fangnaka,
    You can use JWDSP2.0 + Tomcat 5.X +Jdk1.5 to develop and deploy webservice.
    Better IDEA are Intellij or Eclipse for webservice code development.
    Cheers
    Rajesh R

  • What is your opinion about clean my mac?

    i would like to get clean my mac for my macbook pro late 2011. what is your opinion? is it money worth? thank you in advance..

    I strongly advise against any "cleaners"; usually they give you more trouble than they help.
    But see this discussion:
    Is clean my mac any good, Is clean my mac any good
    Regards
    Léonie

  • Your opinion - graphical configuration consoles for JBoss & Tomcat

    Hexamind Companion for JBoss and Hexamind Companion for Apache Tomcat are tools for developers and system administrators who manage the configuration of J2EE servers. We are nearing the final stages of development, and would like to hear your opinion about these tools.
    Please follow the links below to learn more and participate in our online surveys.
    If you are familiar with Apache Tomcat:
    http://www.hexamind.com/website/surveys/tomcat?orig=e1
    If you are familiar with JBoss Application Server:
    http://www.hexamind.com/website/surveys/jboss?orig=e1
    We thank you for your help,
    Itai Shirav
    Hexamind Ltd.
    http://www.hexamind.com

    Hmm Marketing

  • Hey guys I was  wondering do I need an anti virus software on my mac? I don't think I need it but as a first time mac user I wanted your opinion.

    Just wanted to get your opinion.

    This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an attacker who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
    Starting with OS X 10.7.5, there is another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications that are downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Applications certified in this way haven't actually been tested by Apple (unless they come from the Mac App Store), but you can be sure that they haven't been modified by anyone other than the developer, and his identity is known, so he could be held responsible if he knowingly released malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe. Note, however, that there are some caveats concerning Gatekeeper:
    It doesn't apply to software that comes packaged as an installer. Treat all third-party installers with caution.
    It can be disabled or overridden by the user.
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
    It only applies to applications downloaded from the network. Software installed from a CD or other media is not checked.
    For more information about Gatekeeper, see this Apple Support article. 
    Notwithstanding the above, the most effective defense against malware attacks is your own intelligence. All known malware on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. [Some reputable websites did legitimately warn users who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.]
    “Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
    Java on the network (not to be confused with JavaScript, to which it's not related) is always a potential weak spot in the security of any operating system. If a Java web plugin is not installed, don't install it unless you really need it. If it is installed, you should disable it (not JavaScript) in your web browsers. Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those obsolete versions has known security flaws that make it unsafe to use on the Internet. The flaws will never be fixed. Regardless of version, experience has shown that Java can never be fully trusted, even if no vulnerabilities are publicly known at the moment.
    Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
    Never install any commercial "anti-virus" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.

  • How to a make a suggestion about new features i'd like to see in itunes

    how to a make a suggestion about new features i'd like to see in itunes?
    I can't find any link to do this. I found a page where you can request songs or an album to be added, but i can't find a page to submit my suggestions for itunes i have for new features i'd like to see

    As of now there is no good, direct link for feedback on iTunes itself. Writing Apple might be the best option, with the website feedback page perhaps the next best.

  • Steps to link a report to Web Application Form. Post Your Opinion

    Hi friends,
    After going through it what is your opinion. please do post your opinion.
    Could any one give the complete steps of Linking a report to web form so that when called / clicked the link the report can display the data.
    I have unchecked the "Report Option -> Save Data with Reports". So that the report could not take extra space.
    I have DB connection code in my .aspx.vb file, it is as follows:
    Private Sub ConfigureCrystalReports()
    Dim fileName As String = "Reports\" & ReportID & ".rpt"
    Dim reportPath As String = Server.MapPath(fileName)
    myRepDoc = New ReportDocument()
    myRepDoc.Load(reportPath)
    myCrystalReportViewer.ReportSource = myRepDoc
    myCrystalReportViewer.RefreshReport()
    Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
    If Session("reportConnectionInfo") IsNot Nothing Then
    Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
    myConnectionInfo.ServerName = ConnInforArrList(0)
    myConnectionInfo.DatabaseName = ConnInforArrList(1)
    myConnectionInfo.UserID = ConnInforArrList(2)
    myConnectionInfo.Password = ConnInforArrList(3)
    Else
    lblMessage.ForeColor = Drawing.Color.Red
    lblMessage.Text = "Session is off. Please Relogin to See the Report."
    End If
    SetDBLogonForReport(myConnectionInfo, myRepDoc)
    SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
    myCrystalReportViewer.SelectionFormula = GetFieldName(ReportID) & "='" & Session("CompCode") & "'"
    myCrystalReportViewer.Visible = True
    End Sub
    Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
    Dim myTables As Tables = myReportDocument.Database.Tables
    For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
    Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
    myTableLogonInfo.ConnectionInfo = myConnectionInfo
    myTable.ApplyLogOnInfo(myTableLogonInfo)
    Next
    End Sub
    Private Sub SetDBLogonForSubreports(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
    Dim mySections As Sections = myReportDocument.ReportDefinition.Sections
    For Each mySection As Section In mySections
    Dim myReportObjects As ReportObjects = mySection.ReportObjects
    For Each myReportObject As ReportObject In myReportObjects
    If myReportObject.Kind = ReportObjectKind.SubreportObject Then
    Dim mySubreportObject As SubreportObject = CType(myReportObject, SubreportObject)
    Dim subReportDocument As ReportDocument = mySubreportObject.OpenSubreport(mySubreportObject.SubreportName)
    SetDBLogonForReport(myConnectionInfo, subReportDocument)
    If myReportObject.Name = "Subreport1" Then
    Dim lvSec As Section = subReportDocument.ReportDefinition.Sections("DetailSection1")
    If Not lvSec Is Nothing Then
    Dim t1 As TextObject
    t1 = lvSec.ReportObjects("txtEmpName")
    t1.Text = Session.Contents("EmpName")
    Dim t2 As TextObject
    t2 = lvSec.ReportObjects("txtRepID")
    t2.Text = Request.QueryString("REPID")
    End If
    End If
    End If
    Next
    Next
    End Sub
    Please do help me out as the data of report is not getting displayed on the report.
    After going through it what is your opinion. please do post your opinion.
    While creating the Report has the following Report Options on / checked.
    1. Database Server is Case-Incensitive
    2. Use Indexes Or Server For Speed
    3. Verify on First Refresh
    4. Show Preview Panel
    5. Display Alerts on Refresh
    6. Select Distinct Data for Browsing
    Do I have check or uncheck any other option?
    Thanks and regards
    Edited by: Md. Mushtaque on Sep 6, 2008 2:50 PM
    Edited by: Md. Mushtaque on Sep 8, 2008 9:27 AM
    Edited by: Md. Mushtaque on Sep 8, 2008 12:14 PM

    Sir AG,
    Thanks a lot for replying and spending your valuable time for my problem.
    Sir, I just want to put this in your knowledge that my application is web based application and I am calling these reports through web forms i.e. of ASP.NET coded in vb from .aspx.vb files.
    So as per the code I have attached, I have this
    Option Explicit On
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Next for ReportDocument Object:
    Dim fileName As String = "Reports\" & ReportID & ".rpt"
            Dim reportPath As String = Server.MapPath(fileName)
            myRepDoc = New ReportDocument()
            myRepDoc.Load(reportPath)
            myCrystalReportViewer.ReportSource = myRepDoc
    Above is the code used by me in Page_Init  and I have already tested it from Page_Load. I have got few suggestions from this forum that I should put this code in Page_Init only.
    Lastly:
    The database connectivity code:
    Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
            If Session("reportConnectionInfo") IsNot Nothing Then
                Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
                myConnectionInfo.ServerName = ConnInforArrList(0)
                myConnectionInfo.DatabaseName = ConnInforArrList(1)
                myConnectionInfo.UserID = ConnInforArrList(2)
                myConnectionInfo.Password = ConnInforArrList(3)
            Else
                lblMessage.ForeColor = Drawing.Color.Red
                lblMessage.Text = "Session is off. Please Relogin to See the Report."
            End If
            SetDBLogonForReport(myConnectionInfo, myRepDoc)
            SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
    SetDBLogonForReport(myConnectionInfo, myRepDoc)
    Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
            Dim myTables As Tables = myReportDocument.Database.Tables
            For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                myTableLogonInfo.ConnectionInfo = myConnectionInfo
                myTable.ApplyLogOnInfo(myTableLogonInfo)
            Next
        End Sub
    This code I have got from a sample of the forum itself.
    Sir, after all these effort and the unchecking of option "Save Data with Report" on calling the reports from my forms it is showing blank report. No data from the database is coming form the database.
    I have uncheked the option "Save Data with Reports" to get the updated data each time the report has been called but now the status is that nothing is coming.
    Thanks again for you precious and valuable effort to help me but the my problem is unsolved, So sir please if you could put an eye on it and help me out to get rid of this problem, I will be very thankful to you for your kind help.
    Thanks and regards
    Mushtaque

Maybe you are looking for