Your plans for Community Day and TechEd?

Last year when I attended the Community Day and TechEd it was great to meet a lot of people who I knew very well, but only through their posts on the forums: Pizzaman, Ajay Das, AHP, Buddhi Kalakheti (haven't seen him on the BI forum for a long time now), Rich Heilman and many others.
Since TechEd is coming up in October I thought it would be nice to know who all are planning to attend, so we can meet face to face
Regards,
Bhanu

"sent out emails with the entry code for the 'free' spaces...I think if you earned
1000 points since the last contest. "
I think I earned more than 1k during the period (BTW the top controbutors list has some silly Bex formula I think I see 3700 odd points for the contest duration (06-07) and vaguely remember having 3.5K or so points at that point last year. Which should have me now at 7k plus instead of 5Kplus that I am at. But then again, I might be remembering it all wrong).
Anyway, I never got any invitation or code so not really sure how that worked. Have sent a mail to the mail-id to see if I can still get registered. If I do not hear, I will start making noise in coffee-corner as planned.
I was thinking I could hold a session on job scenario, fake resumes, interview questions and so on - with a perspective on what it is like on the grounds in India. More of a discussion than anything else - so people become aware of the reality of the 'freshers' who everyone on SDN seems a little wary of.... But it seems sessions are overbooked, and then again who wants to hear the things that are played over and over on forums and other such places....
Hope to see more of SDNers if I do get to be there

Similar Messages

Hello !! Because if I talk daily to the dame Person for FaceTime and two are always in the same place, once day face time no prolem speak for another day and I have to use skype for error appearing face time ? Thanks for your answers.

Hello !! Because if I talk daily to the same Person for FaceTime and two are always in the same place, once day face time no prolem speak for another day and I have to use skype for error appearing face time ? Thanks for your answers.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Can i return my new ipad that i upgraded i have only had it for 11 days and i still have its box and all it came with

Can i return my new ipad that i upgraded i have only had it for 11 days and i still have its box and all it came with

You have 14 days from date of purchase. You need all the packaging plus your receipt.

During an app update it froze and has said waiting for 2 days and I am unable to open or delete

During an app update it froze and has said waiting for 2 days and I am unable to open or delete. How do I recover my app?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

I have 3 mail accounts in apple mail. One of them has had the spinning ball going for several days and I cannot receive mail in this account. I can receive mail in this account on my iPad and by signing into aol on safari. It's obviously a glitch in Apple

I have 3 mail accounts in apple mail. One of them has had the spinning ball going for several days and I cannot receive mail in this account or delete messages etc. For some reason, I CAN send mail on Apple mail using this account, although it takes several minutes. I can receive mail in this account on my iPad and by signing into aol on safari and internet explorer on my office PC. It's obviously a glitch in Apple's Mail. I've deleted this account and reopened it in Mail on my Mac Pro with no difference. Any suggestions would be greatly appreciated, this E amil account is major to my business.

http://support.apple.com/kb/TS3276
sounds like a corrupt database or index
the glitch is your home folder and mail folder, esp look at syncservices
I'd post in the mail or Lion forum where you will find similar issues being discussed.
http://www.apple.com/support/mail

My husband just got me an iPad 2 for Mothers day and today when I tried to sign on it is saying I don't have any cellular data left? I'm at work and we have wi-fi, why can't I access my webmail and the internet with just that?

My husband just got me an iPad2 for Mothers day and today when I tried to sign on to it it said I do not have a cellular data network? I'm at work where we have Wi-fi. Can't I just use that to sign onto my webmail and to get onto the internet?

If you are in a wi-fi only area, then you need to join a wi-fi network. Does your office have wi-fi? Has the Admin given you the iformation to join the wi-fi network?
To join a wi-fi network...
1. Go to Settings/Wi-Fi
2. Tap Other...
3. Enter the name of your wi-fi network
4 Tap Security
5. Tap the type of security the network uses and return to Wi-Fi
6. Enter the password and tap Join

Multicast works for a day and then stops

I'm running multicast in unicast mode on our WLC because I can't enable PIM on wired side yet for a couple reasons. It works consistently on 3 out of 6 WLAN's. And the weird thing is the other 3 WLAN's will work for a day, and when I come in the next day, multicast traffic has stopped flowing. I have verified this through IGMP snooping, using a bonjour browser, testing airplay, and using packet capture on a wireless NIC. 2 of the WLAN's are configured almost identically, but one works consistently day after day, and the other only works for a day after resetting the wlan. I have been coming in the morning and changing a single setting back and forth just to reset the WLAN so it will work for the rest of the day. I'm just writing this to see if someone can think of why it would work fine for the shole day and then stop working by the next morning. It's not an IGMP timeout setting, because it works for much longer than the timeout and behaves the same way even without IGMP snooping on. It started doing this after upgrading to 7.0.240.0. We have very little amount of multicast traffic on wireless, and low channel utilization. It does the same exact thing whether 802.11a or 802.11g so I don't think it has to do with data rates. When I have IGMP snooping on, and on the WLAN's where it's not working, the controller will see the multicast group join message from the client, but the client doesn't see the IGMP query from the controller. It shouldn't be wired config related since it's unicast mode. I've tried with and without broadcasting enabled. Any ideas?

Okay, so I discovered two things, but I still don't know what caused this problem. When I was running 7.0.230.0 I had increased my EAP-Broadcast key interval to 86400 due to a bug. This seems to be related to the fact that on the wlan's where multicast was not working, it stopped by the next day. When I backed this interval down to 3600 the multicast stopped working after an hour instead of a day. So that's why I believe it was somewhat related to the broadcast key, since that key is used for multicast.
What I realized is that multicast was working on all the wlan's on all AP's that had been rebooted since the controller upgrade (They had been rebooted due to a switch losing power). This is weird because all the AP's were rebooted when they received their own 7.0.240.0 software upgrade, so I don't know why they would have needed to be rebooted again. Anyway, I rebooted a few more AP's and multicast works properly on all wlan's on those. I'm just replying to my own thread here in case someone has a similar problem after upgrading your controller - try rebooting all your access points again. Or maybe reboot after changing EAP-Broadcast Key interval.

Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again.

Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again. I'm in the middle of a project that needs to go live tomorrow. HELP!!! Please.

Photoshop requires 512 Meg of VRAM or more to use the 3D features - that's been the same for version 14 (CC) and now 15 (CC 2014). Check Help->System Info to see how much your card says it has.

Muliple inspection plan for same material and same usage

Hi,
I need to create multiple inspection plans for same material with same usage.during the inspection lot creation i need to select any one inspection plan.
In standard SAP its not possible.Any user exits available for this..
Regards,
S.P.Selvathangam

Dear Selvathangam Palanisamy ,
My Dear Shayamal is absolutely correct and we are corrently using this SAP facility. You can create 'N' number of inspectio plans for a material and then whenever the inspection lot will created ( Thru a process order or Manual) then you will get the Inspection Lot Status 'CRTD' (Created mode) then you have to select your Inspection Task list manually by two way...
Either go to QA02 and then select it from the list of multiple plans.
Or you can directly go from QA32 ...select your inspection lot row and directly click on the Inspection Lot icon to go directly to the inspection lot window to slect the Task list.
Further there is no need to remove the Automatic Assignment from the QM View of the Material Master as if there is only one task List then system will automatically assign the TASK LIST, if you deselect it then you have to select in every case.
Thanks

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i

HT1349 The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only t

The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667

http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it wont because it tells me I am using a trial version.... How can I remove the trial version?

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it sometimes wont because it tells me I am using a trial version.... But sometimes it lets me!! How can I remove the trial version? I cannot tell which one I am using when I open it....

Question asked and answered quite once a week.
Go to my iDisk (address below)
and download :
For_iWork:iWork '09:uninstall iWork '09.zip
Run it then reinstall the purchased software.
Yvan KOENIG (VALLAURIS, France) vendredi 2 janvier 2011 16:21:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community

I bough a MacPro for one day and has a line on screen

A very poor quality and unacceptable from apple's product.
I bough a new Macbook Pro for one day, and found that there is now a line in mdle of screen. I asked the technical support and learnt that this is technical problems.
Dissapointed you apple.

If you've had your machine for less than 14 days, you can take it back to the seller for an exchange or a full refund.
There's really no one from Apple in these forums - we're users, just like you.
Clinton

I have had my macbook pro for 3 days, and it will not charge. I tried several differnt outlets, tried cleaning and wiggling the magnet charger, still nothing. Has this happened to anyone else? Any suggestions?

Has this happened to anyone else?

Jaybunni wrote:
I have had my macbook pro for 3 days, and it will not charge.
You have 14 days from the date of purchase to return your MBP. Personally, I would not waste my time "troubleshooting" if the normal solutions do not work.
Return the MBP for one that works before your 14 days are up and/or call AppleCare ASAP!!!
Good luck!

I dropped my ipod in the pool and put it in rice for three days and now the screen stays white. what is the cheapest way to fix my ipod?

i dropped my ipod in the pool and put it in rice for three days and the screen just stays white now. what is the cheapest way to fix thiss?

There are companies that specialize in data retrieval but it's costly (probably cheaper to buy a new iPod) and more than likely as Allan said, your circuits are probably damaged beyond all hope of retrieving anything. It's worth calling Apple you maybe able to get a discount or a refurbished iPod. Can't hurt to ask, Good luck. (And in the future... no texting in the john.) Sorry, couldn't resist it.

Your plans for Community Day and TechEd?

Similar Messages

Maybe you are looking for