Your server has unexpectedly terminated the connection

Hello All, Is anybody else getting this error message? Anybody know why? Any known fixes? I am running:Windows 8.1Windows Live Mail (but also see the problem using Outlook 2010)Only see the problem with my IMAP account, POP accounts have not had the problem. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Details:The server did not respond to this IMAP command before the connection was terminated.Configuration:Account: *******Server: imap.comcast.netUser name: ******Protocol: IMAP Port: 993Secure(SSL): 1Code: 800ccc0f

Unfortunately I have not been able to resolve the problem and Comcast has not been of any help. All I can do is tell you what did not work for me. - I called customer service and he tried resynching the mail server (not sure what that actually is), he was sure this would work, it did not resolve the issue.- I was told to reinstall windows live mail, I did and that did not resolve the issue at all- Turned off the firewall and email virus scanning, no improvement- Increased and decreased lenght of server timeouts, no improvement I have discovered that I get the error message with windows live mail and Oultlook 2010 but not with the windows mail app that comes with windows 8. I have also found that I only get the error with my imap accounts. Very frustrating......

Similar Messages

What will i do when i received the message of an error is that "your server has unexpectedly termina

What will I do when I received the messages about the errors? Here the information was given away :
"Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Subject 'Kindly send a check this week', Account: 'imap.mail.rogers.com', Server: 'smtp.broadband.rogers.com', Protocol: SMTP, Server Response: '552 Message Size exceeded', Port: 587, Secure(SSL): No, Server Error: 552, Error Number: 0x800CCC0F"

Are you getting this error message on your printer or computer ?
What kind of printer do you have and what operating system are you using ?
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
Murali

Dear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Microsoft // Winlogon 4005 (The Windows logon process has unexpectedly terminated) on one Windows Server 2012 VM with working RDS roles installed

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Since upgrading to Yosemite I am getting frequently "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again"

Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
I am also noticing page load very slowly when this problem is not occurring.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Server unexpectedly dropped the connection ...

Safari 4.0.3
This has just started happening
Safari can’t open the page “http://store.apple.com/” because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again.
Using Firefox there is no problem
Have cleared cache and reset Safari
What next
john thorne

Hi!
I'm having the same problem here. Tried to delete cache and disable all internet plugins, but that didn't help either. However, I created a clean new user and tried to surf those pages from that account and it worked flawlessly. Thus I think that there's something messed up with my user account. Any ideas anybody?
Christian

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out"

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out". The panel gives me three possible causes, none of which are correct and tells me to "Try again". Sometimes when I try again the site appears, sometimes it does after several tries and sometimes it never does. I called my IP, Cox and they told me it is a result of something Microsoft put out in their updates to IE (presumably to discourage people from using Firefox). Can you help me get rid of this problem?

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out". The panel gives me three possible causes, none of which are correct and tells me to "Try again". Sometimes when I try again the site appears, sometimes it does after several tries and sometimes it never does. I called my IP, Cox and they told me it is a result of something Microsoft put out in their updates to IE (presumably to discourage people from using Firefox). Can you help me get rid of this problem?

Remote Desktop disconnects immediately. Error 4005; Windows logon process has unexpectedly terminated.

Hi, I have always been able to remote into my pc (Win 8.1) using remote desktop. Just recently this stopped working. Either I get a blank screen for about 10 seconds and then it closes or the connection closes immediately. Every time this happens I get error
4005 in the event log; Windows logon process has unexpectedly terminated. It seems the remote desktop stopped working after the last set of Windows updates were applied. But no other web searches indicates anyone else has had this problem recently. I've also
read the Windows Server document or error 4005 which suggests my registry may be corrupt or a service may be stopped but this does not seem to apply to my situation. I'm stumped and without being able to remote into my pc from my office I can't do my job.
Any suggestions would be greatly appreciated.
UPDATE: After installing a new required Windows update and a bunch of optional Windows updates (that I had been ignoring), the problem has been fixed. I'm guessing which ever Windows update broke Remote Desktop was fixed in the latest update(s).

Hi arzoo1,
So you have checked the steps mentioned in the article below?
Event ID 4005 — Windows Logon Availability
You may take a try with Dism /online /cleanup-image /resorehealth command and then check if issue insists.
For Windows Update related, please consider system restore or startup repair.
Try to boot into clean boot and then remote again to check if issue insists.
Best regards
Michael Shao
TechNet Community Support

Apple Mail The server error encountered was: The connection to the server "

I have had my apple mail set up for some time now, through Gmail, and it has worked fine. I recently moved into a college dorm and now my apple mail gives me this error message
There may be a problem with the mail server or network. Check the settings for account "POP Account" or try again.
The server error encountered was: The connection to the server "pop.gmail.com" on port 995 timed out.
I've tried everything I could think to try, including taking the SSL off, restarting, quitting apple mail, redoing all the settings, and nothing seems to be helping me connect. I did the connectivity test and it says it's connected to the internet, it's just not getting the mail from my Gmail account. Thanks,
Aaron

What are the settings for both your Incoming and Outgoing servers, including port number, authentication method, and whether or not SSL is enabled for both?
Also, it's possible your college is blocking traffiic from Google, so you might try changing the DNS Servers by going to System Preferences > Network > Configure > TCP/IP and enter these two:
208.67.222.222
208.67.220.220
then click Apply Now, quit System Preferences and restart Mail and any other Internet applications you were running. Check to see if Mail still gives you problems.
Mulder

Gateway unexpectedly closed the connection..

When I try to Test Connection for the Active Directory Resources it shows the following error
The gateway unexpectedly closed the connection with an exception, check the gateway trace for more information. ==> java.net.SocketException: Connection reset by peer: socket write error
Previously it has working fine for me...

Kannan SB wrote:
I Have resolved my issue... I had remove the Gateway service and reinstall the service & restart the machine and try it got success...Still I have face the same issue, only it works for sometime I means while we restart the service it will work after some mins it got failed to perform the service.. Please suggest me for that....
I have migrated Sun Identity Manager 8.1 Patch 7 to Oracle Waveset 8.1.1 Still the issue persists ...

SLD server has stopped; start the SLD server in Administration

I am trying to configure Technical Systems in SLD (for deploying a webdynpro application which has models). Logged in as Administrator. I see this message when I login from the portal (https://host:port/sld):
"SLD server has stopped; start the SLD server in Administration." And all the links are greyed out.
When I log in to the Visual Admin, services->Sld->and tested the connection (with same ID as Administrator), I see "connection test failed CIMClientObject"
What ID, password should I be using for testing the connection for SLD in visual Admin. Or is this related to ID password at all.
Thanks
Srinivas

Thanks for the replies!
I still have the same problem.
When I select the SLD Data Supplier under services in Visual Admin, I see an error on the task bar at the bottom: SLD_Collector_Task
When I open this item, I see the following error message:
"2008.12.10@10:51:20: HTTP call failed: Failed to send HTTP data: 503 : Service Unavailable. Please check if the target SLD system is available and the SLD bridge is started there"
Is this something related to SLD configuration.
Thanks
Srinivas

Urgent OmniPortlet JDBC SQL Server - Unable to establish the connection

Not sure if this is the correct forum but as there is another JDBC question regarding portlets in this forum I have to give this a try as it is URGENT I get this solved.
Please see my post in the Portal General Forum
OmniPortlet DataDirect JDBC SQL Server - Unable to establish the connection
Thanks!

Not sure if this is the correct forum but as there is another JDBC question regarding portlets in this forum I have to give this a try as it is URGENT I get this solved.
Please see my post in the Portal General Forum
OmniPortlet DataDirect JDBC SQL Server - Unable to establish the connection
Thanks!

Has anyone run the connection pooling for mysql & tomcat successfully?

I'm trying to set up connection pooling. I'm following the how-to page at
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html
But when i test the DBTest/test.jsp file, tomcat displays an error =
could not load jdbc driver class 'null'(msdos)
i have placed all the required .jar files in the tomcat lib.
below is the cofiguration i did to the server.xml file



<Server port="8005" shutdown="SHUTDOWN" debug="0">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>


<Service name="Tomcat-Standalone">


<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="20000"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>











<Engine name="Standalone" defaultHost="localhost" debug="0">



<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>


<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>







<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Context path="/my-jsp" docBase="c:\JSP-Files" debug="0"
privileged="true" reloadable="true" />
     <Context path="" docBase="c:\Inetpub\wwwroot" debug="0" privileged="true" />
<Context path="/sharon" docBase="C:\Tomcat 4.1\webapps\sharon" debug="0" privileged="true" />





<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
     timestamp="true"/>




<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_DBTest_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>



          
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<Resource name="jdbc/TestDB"
     auth="Container"
     type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/TestDB">
<parameter>
     <name>factory</name>
     <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
     </parameter>
     
     <parameter>
     <name>maxActive</name>
     <value>100</value>
     </parameter>
     
     <parameter>
     <name>maxIdle</name>
     <value>30</value>
     </parameter>
     
     <parameter>
     <name>maxWait</name>
     <value>10000</value>
     </parameter>

<parameter>
<name>user</name>
<value>javauser</value>
</parameter>
<parameter>
<name>password</name>
<value>javadude</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>org.gjt.mm.mysql.Driver</value>
</parameter>

     <parameter>
     <name>url</name>
     <value>jdbc:mysql://localhost:3306/javatest?autoReconnect=true</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Context>
</Host>
</Engine>
</Service>



</Server>
Pleas4 help!!!

you have your driver jar in Tomcat\common\lib?
if so, check your classpath, it could be that.

"We could not complete your iTunes store request. The connection was reset". Help please!

Help PLEASE!
Let me explain my situation:
- iTunes store has been working fine on all computers for the past few years.
- Modem gets struck by lightning last Mon.
- Get a new Netgear modem yesterday.
- Internet all working fine. Can browse, download etc. in browser (Mac App store, and iDevices App Stores all working fine, too)
- Cannot connect to iTunes store. Get error "We could not complete your iTunes Store request. The network connection was reset".
- I Get the same error on 2 MacBooks, but i can browse the store on my 2 Win7 PC's.
- I managed to connect and browse on my one MacBook using a 3G modem, but still no luck with the ADSL connection.
- I have tried connecting via wired (ethernet) connection to the modem. Still no luck.
- I have had this problem on iTunes 10.2, 10.4, 10.5 Beta, and 10.5.
Does anyone have any idea what is going on here? Any help and advice would be greatly appreciated!
Thanks!
George.
Modem Model no.: DGN 2200

with everyone downloading the update, the servers are probably bogged down with requests, probably just wait it out and it will start to download and get you back up and runnin
dante

Your server has unexpectedly terminated the connection

Similar Messages

Maybe you are looking for