Your server IP address is in local blacklist

Recently it has happened to me more and more often that my emails are sent back to me as undelivered email, with the remark "Your server IP address is in local blacklist".
This happens even with my contacts that are in my Address Book and I was sending them emails previously no problem!
Even replied to an email and got the reply right back with the same statement.
Could anybody tell me what to do?
I have a dot mac account and do not like this trouble at all.
Thanks a lot in advance,
Lacko B

That would suggest that somebody reported somebody with a .mac address to a blacklist to which the mail providers of the people to whom you are attempting to send emails use as part of their own spam filtering, and those email providers blacklisted mac.com as they are the server.
You should probably alert .mac mail technical support people, providing the returned emails with full headers intact, and maybe they can sort it out with the blacklist maintainer and the mail provider who is blocking you. There really isn't anything else you can do.

Similar Messages

  • Windows Store App can't verify the server is trusted for your sign in address

    I am aware this is (or was) an issue for the Lync 2013 client as well, as per
    http://terenceluk.blogspot.ie/2013/04/signing-into-lync-2013-client-presents.html
    This does seem to be fixed at this stage though, because after adding lyncdiscoverinternal.SIPdomain.com the Lync 2013 client does not prompt about the certificate.
    However, the Windows Store app does prompt "Lync can't verify that the server is trusted for your sign-in address. Connect anyway?" This presumably boils down to the same issue where our Lync 2013 Frontend is lyncfrontend.internal.domain.com which
    does not match the SIPdomain.com.
    Is there a fix for this other than forcing lyncdiscoverinternal to the reverse proxy? The TrustModelData registry key only applies to the Lync 2013 full client so does not affect the Windows Store app.
    Any suggestions would be welcome.

    Hi wagenveld，
    Create the DNS records as below:
    Internal SIPdomain.com zone:
    DNS A record：
    lyncdiscoverinternal.SIPdomain.com-> sip.SIPdomain.com
    DNS A record: 
    sip.SIPdomain.com-> IP address of Front End Server
    For details, you can refer to the following blog:
    http://blogs.technet.com/b/jenstr/archive/2011/02/10/lync-cannot-verify-that-the-server-is-trusted-for-your-sign-in-address.aspx
    Best Regards,
    Lisa
    Lisa Zheng
    TechNet Community Support

  • How to configure ipsec policy on windows server 2008 r2 to permit local machine only access to gateway,one other server and it's local ip?

    I have applied IPsec policy on local machine(ip address:10.82.138.76) with windows server 2008 ent r2 installed,only permit local machine to comunicate with itself,one other server(ip address:10.82.138.77) and the gateway device(ip address:10.82.138.1).After
    i asigned this policy,i can ping the gateway (ip address:10.82.138.1),and the other server(ip address:10.82.138.77),but i can't ping local machine itself(ip address:10.82.138.76),could anybody tell me why and how to solve this problem?When i applied the same
    policy to windows server 2003 ent,i can ping the local machine ip address.

    Hi,
    Thanks for your post.
    First, try to ping the loopback address 127.0.0.1. If the loopback test succeeds but you cannot ping the local IP address, please post the unedited
    ipconfig /all and route print of the problematic computer.
    For test purpose, you may refer to the following lab step by step guide to deployment Tunnel Mode IPsec. Hope it helps.
    Windows Firewall and IPsec Policy Deployment Step-by-Step Guide
    http://technet.microsoft.com/en-us/library/cc732400(v=ws.10)
    Connection Security and IPsec
    http://technet.microsoft.com/en-us/library/cc771593(v=ws.10).aspx
    Connection Security Rule Wizard: Tunnel Endpoints Page - Client-to-Gateway
    http://technet.microsoft.com/en-us/library/dd759083
    Best Regards,
    Aiden
    Aiden Cao
    TechNet Community Support

  • Internal Mail Server IP Address

    I recently starting working in a new office that runs their Exchange email server internally, so in my Outlook settings it just lists a local domain as my Server. I would like to be able to receive my emails from my phone but the IT department won't provide
    me with a server domain that I can access outside of the office's network. 
    Is there a way that I can find out by myself the external domain? I've tried the obvious, mail.companyname.com, but no luck.
    Thank you!

    Hi,
    As far as I know, we can get the server FQDN and more information through the option "about"
    in OWA. Then you can ping your server FQDN to get the server public IP address.
    To get the internal IP address, you can contact with your Admin.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Calendar server and address book server login fails with outlook connector

    Hi all,
    I have installed Java Communication Suite 5 according to the doc http://blogs.sun.com/factotum/resource/comms5-install-linux.html.
    When i deploy the connector i get the pop ups saying "Server:servername:3080
    Error:service not available" also
    "Server:servername:80/uwc"
    Error:service not available"
    asking to login to calendar server and address book server.Clicking "OK" allows install.
    In outlook i can send and receive mails but not the meeting requests.It gives the error "login to calendar server" when i create a meeting request.
    Please let me know what i have to do to get rid of the error.The username and passwd entered is correct.
    Regards,
    lmeenakshy

    Hi,
    When i deploy the connector i get the pop ups saying
    "Server:servername:3080
    Error:service not available" also Do you get exactly what you say above, or have you substituted in the real server name for "Server:servername:" above?
    I would check through the outlook connector deployment configuration to verify that you have inserted valid information into all of the host & port fields - perhaps check the .ini file that is created to see if it has "Server" and "servername" listed.
    "Server:servername:80/uwc"
    Error:service not available"You are able to log into UWC via the web-interface and access your calendar/pab and edit/modify/delete calendar & addressbook entries right? The services are all up?
    asking to login to calendar server and address book
    server.Clicking "OK" allows install.The outlook connector deployment software gives you the option to increase the logging level, try that and see what the logs say - what was it trying to connect to/check which failed.
    In outlook i can send and receive mails but not the
    meeting requests.It gives the error "login to
    calendar server" when i create a meeting request.
    Please let me know what i have to do to get rid of
    the error.The username and passwd entered is
    correct.I suspect this is more of an underlying configuration issue that needs to be sorted out, once that happens you shouldn't have to keep logging in.
    Regards,
    Shane.

  • The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

    I got this problem when I tried to configure out-going email and add an account to farm administrator group.
    I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
    Here are the screen shots.
    The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
    Anyone can help me about it? Thanks.
    Here is the log.
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    8gsf
    High    
    #160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
    characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         General                      
    8kh7 High    
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    7946 Critical
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         Runtime                      
    tkau Unexpected
    Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
    server administrator.    at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message)     at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
        at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
    eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    The e-mail address I have tested it for several times and there is no problem.
    Anyone has any clue about this error?

    Hi.
    This I have seen before...
    It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
    It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
    It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
    If, its the builtin SMTP service you are using, check this link:
    http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
    Check that and try again.
    Regards
    Thomas Balkeståhl - Technical Specialist - SharePoint -
    http://blog.blksthl.com
    Download the SharePoint Branding Project here
    Download the SharePoint 2010 Site Settings Explained here

  • Change of SAP Server IP Address

    Hi,
    We are using operating system win 2008 server (IP address: 192.168.50.1), In that we are accessing SAP ECC6.0 Server(IP address: 192.168.50.2)  and SAP Solution Manager server(192.168.50.3) through  HyperV Manager, both servers are installed in windows server 2003.
    Recently we are relocating our server.
    Now we are planning  to change IP address of servers according to our LAN.
    Like :
    win 2008 server IP address: 192.168.50.1 to  192.168.2.1
    win 2003 server( SAP ECC6.0) IP address 192.168.50.2 to 192.168.2.2
    win 2003 server( SAP Solution manager) IP address 192.168.50.3 to 192.168.2.3
    Please suggest me if any impacts while changing the IP Address.
    Regards,
    BBC  Achari

    Dear Achari,
    Check whether your machines are configured using hostnames not ip addresses.
    look in table rfcdes for sm59 RFC destinations and see if you need to change any ip to valid host names also look at  any scripts that may ftp files to your machine or so
    Also check profiles/scripts/./etc/hosts etc.
    Also check your transport management system, it always using hostname but check whether any IP address you have mentioned there.
    Except that there is no big risk in changing IP addresses.
    Hope this will help.
    Thanks
    Anil

  • The attempt to connect to the server (IP address) on port 443 failed - OLT

    Hi all
    I am facing one problem, if i run load to any application for 100 users for 1 iteration then it is not showing any error. Lets say i ran the load of 100 users for one hour then for some users there are errors like
    Line: (script.java:84)][ScriptException]: The attempt to connect to the server (IP address) on port 443 failed.
    And my understanding is the user's which are facing failures is not able to get response or page loaded at their end. As failures are occuring for some particular steps not the entire scenario. Pls confirm.
    Thanks

    I believe that's an indication that there is an error receiving mail, but if you have any drafts or email in your outgoing mailbox, try deleting them.  Apple's troubleshooting steps for this are (from http://support.apple.com/kb/TS4002):
    Cannot receive mail in OS X Mail
    If you use OS X Mail, look at the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dim and has a lightning bolt next to it, your account is offline. To resolve this, make sure your computer is connected to the Internet. Then choose Go Online from the Mailbox menu.
    If taking your iCloud account online doesn't resolve the issue, follow these steps:
    From the Mail menu, choose Preferences.
    In the Preferences window, click the Accounts tab if it is not already selected.
    In the Accounts list, select your iCloud email address.
    Click the Account Information tab.
    Verify your SMTP server settings with the following information:
    Incoming Mail Server: imap.mail.me.com
    User Name: Your iCloud email address
    Password: Your iCloud password
    Click the Advanced tab and verify the following additional settings:
    Port: 993
    Use Secure Sockets Layer (SSL): Should be enabled
    Authentication: Password

  • How to retrieve available (server)-IP addresses on a LAN

    Is there a method to get all/the available (server)-IP-address(es) on a LAN from the host program?
    As far as I understood the samples (e.g. in tcpex.llb) the host (or it's operator) has to know the IP-address of the server to start communication. However it would ease the usage of a host-program if all/the available server(s) could be selected e.g. from a list-box.
    I posted this question already yesterday with some additional explanations however couldn't find it in my "posted questions"-list. So I try again.

    You don't tell us enought about the type of "servers" you mean. Are these all LabVIEW programs? In this case it should be relatively easy for them to keep each other updated at regular interval, e.g. via UDP multicasts.
    Alternatively, your servers can announce themselves via a UDP packet to the subnet broadcast address and to a specific port.
    If these are servers with code not under your control, you need to probe them. This is not such a big deal on your private LAN and I don't think it will trigger IDS systems. Keep a short list of all possible server IPs, then try to connect at the specified port at regular intervals using a short timeout.
    Are you communicating with TCP or UDP?
    In the absence of firewall code, you can have 3 possible responses for TCP:
    (1) No response --> The server computer is down (or there is a stealth personal firewall running). You get a TCP timeout error.
    (2) Active rejections (TCP RST packet) --> The server computer is up, but the server program is not running. Nothing is listening on the target port. You'll get an error.
    (3) Accepted connection (SYN-ACK) packet. --> The server is up and listening for connections. The threeway handshake can be completed. No error.
    UDP is a bit trickier, because it is connectionless. Many UDP services are one-way. For example a syslog server just receives packets, it never acknowledges anything.
    It is easy to tell if the server computer is up, but the service is not listening. In this case you get an ICMP(3,3) response and an immediate error.
    If the service is listening, you either get nothing or a specific response, depending on the type of server. If you are waiting for return traffic, you'll get a timeout error in UDP read either way.
    (If you just want to check if the server computer is actually up, probe it on a unlikely high port that virtually guarantees an ICMP(3,3) response in the absence of a personal firewall program.)
    LabVIEW Champion . Do more with less code and in less time .

  • "Your server is not configured properly or your search query has ..."

    Config info:
    v490, 20k+users, JES 2005Q1,
    118540-23
    118207-42
    115614-20
    Brief Description:
    When users select the Corporate Directory under the Address Book tab in CE and click the ALL button (or do a wildcard search) they get the following error:
    "Your server is not configured properly or your search query has
    exceeded the limit. Please check server configuration."
    Additional info:
    Additionally this error shows up when a user chooses a View: letter and clicks next for the following page, and additionally if they have the Corporate Directory set as their default address book in options.
    Logs:
    /sun1/dirserv/slapd-mail/logs/errors:
    [11/Oct/2005:10:44:21 -0500] - WARNING<20805> - Backend Database - conn=161557 op=34 msgId=169 - search is not indexed
    /sun1/dirserv/slapd-mail/logs/access:
    [11/Oct/2005:10:23:21 -0500] conn=161557 op=17 msgId=124 - SRCH base="o=ualr.edu,dc=mail,dc=ualr,dc=edu" scope=2
    filter="(&(&(cn=*)(|(objectClass=INETORGPERSON)(objectClass=GROUPOFUNIQUENAMES)))(objectClass=*))"
    attrs="objectClass"
    [11/Oct/2005:10:23:31 -0500] conn=161557 op=17 msgId=124 - RESULT err=0 tag=101 nentries=20540 etime=10 notes=U
    /var/sun1/comexp/logs/uwc.log:
    Oct 11, 2005 10:52:20 AM com.sun.uwc.abclient.ABInitFilter doFilter WARNING: Address Book session already set!!
    changes in /var/sun1/comexp/WEB-INF/config/corp-dir/db_config.properties
    lookthru_limit=30000
    I have a ticket, just wondering if anyone else has this problem...

    You'll be getting this in your case update (answer in response to the internal conversation we've been having about your issue)
    So if they really want to control wildcard searches then they should look in the "personalstore.properties" file for the domain (default: /var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties) for the value of "db.idir.wildcardsearch". Its possible settings are documented in the comments. If they wish to disable all "*" and "*x*" searches (i.e. turn off the 'All' and selecting a letter options) they should set the value to at least 2.

  • How do you find out your "Server"?

    I have no idea what my server is, or how I can come up with it. Help?

    Your "server" for what purpose?   For Podcast Producer, as the footer note implies? 
    If it's Podcast Producer, then it's an OS X Server system that you're running on your own local network, and that's configured with the Podcast Server software.  (If you're not already aware of the difference, OS X Server is a different version of OS X, a package with added features and capabilities that's installed onto the OS X package.)
    Here's the Apple Podcast Producer documentation, which goes into some detail on setting up and using Podcast Producer.
    Or maybe you're asking about Mail and mail servers, as is a common question around the forums?  If it's mail that you're configuring and that you're puzzled with, then you'll need to check for the configuration details with whomever is providing you with your mail.    That provider might be your local Internet Service Provider (ISP) and the ISP's mail servers, it might be Apple with iCloud services, or some other provider.   You could identify your mail ISP, and somebody could then point to the details of setting up mail with that ISP.
    There are may other servers around the network beyond Podcast Producer and Mail, and for various different purposes.

  • Web server ip address

    please help, can anyone tell me where i can find a web server ip address so i could use it on other computers to access my site

    /System Preferences.../Sharing/
    Click Web Sharing checkbox and server IP URL is displayed to the right. David Powers has an _excellent tutorial_ that shows how to set up a virtual host on Leopard using Apache. There's _more info_ if you want to integrate PHP. Is that what you're looking for?
    You would have to publish to a folder from iWeb and place that folder in your user/sites folder.
    Hope that helps

  • None of the authentication methods supported by this client are supported by your server.

    Dear Exchange Admin
    We have implemented exchange server .
    MAPI profile configuration in outlook is working fine.but when we try to configure POP3 in outlook ,without SMTP authentication it is fine.
    But when we enable SMTP authentication ,it is getting the following error
    "None of the authentication methods supported by this client are supported by your server.
    Kindly help
    Ashraf

    This worked for me today, as I had the same issue.
    I had to set encryption to TLS to get it to work, and the server names as yahoo.co.uk...
    In Outlook 2013, click File | Add Account.
    Select Manual setup or additional server types.
    Click Next.
    Select POP.
    Click Next.
    On the “Account Settings” page, enter your account settings:
    Your Name: The name you want to show when you send email.
    Email address: Your full Yahoo email address.
    Account Type: POP3
    Incoming Mail Server: pop.mail.yahoo.com
    Outgoing Mail Server: smtp.mail.yahoo.com
    User Name: Your Yahoo ID.
    Password: Your Yahoo account password.
    Leave the “Require logon using Secure Password Authentication” option unchecked.
    Click More Settings.
    Click the Outgoing Server tab.
    Select the My outgoing server (SMTP) requires authentication box.
    Click Use same settings as my incoming mail server.
    Click the Advanced tab. Enter advanced information:
    Incoming server (POP3) port: 995
    Select This server requires an encrypted connection (SSL).
    Outgoing server (SMTP) port: 465, 587, or 25
    Set the encryption type to SSL or TLS
    Set your desired server timeout and delivery options.
    - We recommend leaving a copy of messages on the server.
    Click OK.
    Restart Outlook.
    Click Send/Receive All Folders.
    You can now retrieve emails from your Yahoo Mail account in Outlook 2013.

  • The server network address can not be reached or does not exist

    Hi all       
        When i am trying to configure Mirroring .i am getting the below error.
     The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
    . TCP/IP and Name pipe connection is enabled in both principle and mirror server configuration.
    I post the complete error message below ,which is in red  
    TITLE: Database Properties
    An error occurred while starting mirroring.
    ADDITIONAL INFORMATION:
    Alter failed for Database 'success'.  (Microsoft.SqlServer.Smo)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
    An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
    The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
    BUTTONS:
    OK

    Hi,
    I have the same problem. However beginning over and over again and using other ports did not solve this unfortunately.
    Here is the SQL I used to setup the mirroring.
    * Principal DB
    CREATE ENDPOINT [MirroringEndpoint]
        AUTHORIZATION [DOMAIN\administrator]
        STATE=STARTED
        AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
        FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
    , ENCRYPTION = REQUIRED ALGORITHM RC4)
    BACKUP DATABASE TEST
        TO DISK = 'C:\full-backup.bak'
        WITH FORMAT
    BACKUP LOG TEST
        TO DISK = 'C:\log.bak'
    ALTER DATABASE TEST SET PARTNER ='tcp://sql2.domain.local:5022';
    * Mirroring DB
    CREATE ENDPOINT [MirroringEndpoint]
        AUTHORIZATION [DOMAIN\administrator]
        STATE=STARTED
        AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
        FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
    , ENCRYPTION = REQUIRED ALGORITHM RC4)
    RESTORE DATABASE TEST
        FROM DISK = 'C:\full-backup.bak'
        WITH NORECOVERY
    RESTORE LOG TEST
        FROM DISK = 'C:\log.bak'
        WITH FILE=1, NORECOVERY
    ALTER DATABASE TEST SET PARTNER ='tcp://sql1.domain.local:5022';
    The last statement on the principal server gives me the following error :
    Msg 1418, Level 16, State 1, Line 1
    The server network address "tcp://sql2.domain.local:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
    From the principal server I'm able to ping the mirror server and can establish a telnet connection. When the statement gets executed even netstat gives me the following output :
    TCP    0.0.0.0:5022           0.0.0.0:0              LISTENING       1244  [sqlservr.exe]
    TCP    10.1.1.140:5022       10.1.1.110:1223       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1226       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1216       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1218       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1225       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1222       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1221       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1224       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1219       TIME_WAIT       0
    TCP    10.1.1.140:5022       10.1.1.110:1220       TIME_WAIT       0
    Is it normal so many ports get opened?
    Any help would be greatly appreciated (as this drives me crazy :-( )
    Found the problem eventually. The mirroring ran as the NT_AUTORITY user instead of DOMAIN\administrator.

  • Your server does not have PHP installed, or PHP is turned off error.

    I am trying to install WordPress from a download and keep on getting this error message Error: PHP is not running. What can I do.

    Its your Server Error, Not firefox issue.
    If your trying to install the wordpress locally, use WAMP server
    If your installing in your server or hosted server, contact the admin

Maybe you are looking for