"Your site has been published to Mobile Me using your personal domain"

When I have done some editing to my site within iWeb I get invited to visit site now, or announce site etc in a window - trouble is window says "Your site has been published to Mobile me using your personal domain" BUT personal domain in my account settings IS NOT the address of my site - which is http://web.me.com/etc....How do I get that window at the end of editing to take me to my site?
(I note in my account settings that I could delete 'personal domain').
At the moment at the end of editing and site is published, I need to close that little window which opens, and then navigate to my site in Safari - Help please.
Thanks
Gareth

Okay, what you need to understand is that MobileMe does not give you a domain name at all, so unless you go to a domain name registrar and actually pay for a register the domain name gareth-sansom.com it is not your domain name.
MobileMe does not register domain names, all it does is enable you to host your website built with iWeb by publishing it to your iDisk.
gsansom is your MobileMe username which you cannot change and you cannot get rid of, so your MME url is always going to be http://web.me.com/username/sitename, so in your case http://web.me.com/gasnsom/ on its own or followed by sitename depending on the number of sites that you have.
The only reason that you would enter a domain name that you have purchased into the personal domain name section in your MobileMe account is if you want to forward it to your MobileMe site. You don't at the moment, so you do not need to enter anything in here - simply publish to MobileMe and your site will then be visible - don't enter a domain name that is not yours and has not been registered.
If you want to register www.gareth-sansom.com as a domain name, then by all means have a look at GoDaddy and see if it is available and purchase it.
gsansom is your MobileMe username which you cannot change. The only way you can change this is by registering for another MobileMe account and using a different username.

Similar Messages

  • Disable "Your site has been published" Message

    Does anyone know how to turn off the Your site has been published message? Every time you upload a change to mobileme this obnoxious message pops up which is ok once, but after awhile it becomes tedious.

    Nope. It's hardwired into the app.

  • Accessing what has been published - On Delivery Architecture

    Hi All,
    I was wondering if there is any way of getting access to what has been published on the content delivery machine when a template executes on delivery.
    I want to be able to interrogate the latest items, based upon publish date; think of the requirement as "Show latest n" of a certain article. I would want to query n of that article, published date descending and return n to the user.
    When I look inside my FLEXFAMILY_C_PUBLISH, there is no data there.
    In fact, I cannot see any date in any of the PUB* folders; PUBMESSAGE, PUBSESSION,PUBTARGET etc.
    I am testing a JSK --> JSK publish locally. Not sure if that is part of the issue.
    Thanks in advance.
    Jason

    Cheers Ravi,
    I have been trying to implement this article:
    http://manifesto.co.uk/working-publish-events-webcenter-sites-part-2/
    I can see that on the delivery side, I get the following events:
    Publishing event fired for
    pubsession: 1374098136922
    Publishing task : UNPACKER
      Status of the task :  SUBTASK_FINISHED
    Message associated with the task : Success
    Publishing task : CACHEUPDATER
    Status of the task :  STARTED
    Message associated with the task : Importer:CacheUpdate started for pubsession 1374098136922
    Publishing event fired for
    pubsession: 1374098136922
    Publishing task : CACHEUPDATER
    Status of the task :  DONE
    Message associated with the task : Importer finished for pubsession 1374098136922
    So, I get three events served to me. What I want to ask is: Are these good stages to hook into and should I be able to get the published assets at these stages?
    I ask because theres nothing in the tables, even when running a Publish. Yet my listener fires, telling me the publish is happening.

  • I want to make some changes in my book after it has been published

    I think I have been quite clear with my intentions with the name of my thread:)
    My books has been published, but I want to add some screencaptures to it. I have the screencaptures, but will I have to wait a few days while Apple checks my updated package, or will they just publish the captures without kepping the book from distribution during their check?

    You don't tell it to read specific lines. You pick out specific columns. Based on your input file one simple way to do this is to use the Read From Spreadsheet File VI to read in your source files. Read the files as string rather than numeric. Chop off the first 15 or 16 lines (up to the start of tabular data) and convert the rest using the Numeric -> String functions to get a 2D array of numbers. You can display the resultant 2D array on the front panel and provide controls (e.g., an array of Booleans) to select which columns to keep. The lines you chopped off at the beginning can be reconstituted into your new header (a 1D array of strings, where each element is a line of your header). You can then use the Write to Spreadsheet File VI to write out your header (feed it the 1D array of strings which are your header lines), and then the new 2D array that constists of only the columns you want.

  • Your information has been sent to our customer service department. We will review your case (est. time 72 hours) and take action as necessary.

    ''locking this thread as it is not a Firefox support issue''
    Your information has been sent to our customer service department. We will review your case (est. time 72 hours) and take action as necessary.
    == URL of affected sites ==
    http://

    Try getting help from Facebook. Those aren't Firefox support issues.

  • I was recently blocked from using app Jack'D. Message I receive says "Your device has been blocked". How can I get around this?

    I was recently blocked from using app Jack'D. Message I receive says "Your device has been blocked". How can I get around this?

    Quoted from their FAQ's:
    I got an error message saying my device is blocked. Why did this happen?
    There are two reasons this could happen: You have deleted your account or you have been banned due to violation of terms of service.
    - You have deleted your account.
    When you delete your account, you agree that your device would be blocked for at least one month. This policy is enforced in order to protect users from stalkers. (If the system allowed users to create and delete their accounts any time they wanted, the Block feature would be compromised and wouldn't be able to protect users effectively.) Please understand this is not a punishment but a security measure intended to keep all of our users safe.
    - You have been banned due to violation of terms of service.
    Users of this mobile application are required to comply with our terms of service and instructions provided by our service team. The most common violations include, but are not limited to: Creating multiple accounts, uploading pictures not complying with our terms, and abusing the Report feature. In most situations, you will get a warning before you are banned from the app. If you receive a warning from our service team, please read it carefully and take it seriously. If anything is not clear, please contact user support for clarification.

  • Facing an error your post has been flagged and it is currently under addtional verification

    Hi All ,
    Please tell me how can i get rid of this issue ?
    I am facing an error when i try to post a query on the exchange forum .Below is the error message .
    Error message :  your post has been flagged and it is currently under addtional verification
    Also i have attached a snap please give me the soulution to resolve this error.
    Regards
    S.Nithyanandham
    Thanks & Regards S.Nithyanandham

    Hi Richard ,
    Please find the below content which i have tried to post.Please help me if anything wrong in the content so that i can change it and repose the content again.
    Thanks in Advance
    Content:-
    Hi ,
    Please have a look in to the below mentioned environment.
    primary site :Chennai 
    server 1 
    server 2 
    secondary site : Madurai
    server 3
    Note : All the above three servers are in single DAG .All the database are mounted on the server (server 1) which is located in the primary site .
    On that 5 databases we are having 3500 users .Based on the user designation we have allocated the mailbox size.
    Query : Each and every day we are having the large no copy queue length for all the five databases to the server located in Madurai site.
    Note : This is an urgent requirement , so please someone help me on this thread and also tell me on what basis i have to allocate the required bandwidth for the exchange servers located between Chennai and Madurai site to reduce the copy queue length .
    Without having any data in my hand i cannot blankly go and ask my network peoples to provide so and so bandwidth for exchange servers.
    Please help me out on this and also tell me is there any tool available to exactly get the required bandwidth for the exchange servers located between the active directory sites.
    Thanks & Regards S.Nithyanandham

  • Your account has been locked for the next 3 hours due to

    I am posting this message on behalf of people unable to access the site due to locked account status.
    I have few co workers in my office getting error "Your account has been locked for the next 3 hours due to
    too many invalid login attempts. Please try again later.
    ". They are trying to access the site with valid userID and Password. Is it possible to do a global check for this issue.
    Thanks,
    RJ

    If your account is locked you cannot edit your personal information, make purchases, or access iCloud or MobileMe.
    See this for what to do:  "This Apple ID has been disabled for security reasons" alert
    appears, http://support.apple.com/kb/TS2446

  • Got a message said "your iphone has been found ,please fill a form "-real or not?

    My friend lost his iphone, his friend got a message said "your iphone has been found ,please fill a form " where you need to provide your icloud confidential .
    Looks really same like the apple office site.
    <Link Edited by Host>

    It is a scam. If your friend gives their Apple ID and passcode, the thieves will be able to bypass the activation lock on the phone.

  • HT4623 Do I need to update my iphone4 because of the security issue that has been published lately?

    Do I need to update my iphone4 because of the security issue that has been published lately?

    Your profile shows you have a 4S with 7.0.6. That is the most current update. Do you also have a 4 that you haven't updated? If so, you should update it too.

  • This board and "Your post has been changed because invalid HTML.."

    I have got warning messages when previewing and posting of...
    "Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied."
    Why can't you just allow users to post "code" samples.
    Here are examples on posting code on another site with forums..
    http://www.dslreports.com/faq/1037
    http://www.dslreports.com/forum/remark,8477196
    Quick two quote(s) from that last URL
    #1 A code block is very useful when you do not wish anything you type to be interpreted (or misinterpreted) within the code block itself. The format of the text is also exactly preserved, all spaces, and everything.
    #2 Within a code block, special characters, > ' &
    and so on, can be used without any interpretation
    being done on them by the forum software or by the
    viewers browser.
    If it is possible to do that here, how does one do that?
    Please and thank you.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
    Solved!
    Go to Solution.

    Hi dslr595148,
    That is certainly possible and has been implemented. When you are in the editor writing a post look above the window for this symbol. 
    Thanks for the suggestion!

  • My mozilla firefox on my desktop brings that the site has been blocked on most of the sites i put in. Help me undo that

    It brings that this site has been blocked due to recent activity that was considered spam

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • On iTunes, while I will be putting a previous back up on my new 6, an error message saying '"your phone has been disconnected" will appear, but my phone will still be connected and nothing has been touched

    I need help.  I have tried it with the cord that came with my 6, as well as my iPad mini cord, and no matter what cord i use, it still shows "your phone has been disconnected", and no one is disconnecting the cord.

    http://support.apple.com/kb/HT4137
    How to restore as new.
    and this for itunes message
    http://support.apple.com/kb/HT1808

  • After Firefox upgrade, Windows 7 no longer allows hyperlinks in e-mails to connect. Message is "This operations has been cancelled due to restrictions in your computer."

    After Firefox upgrade just a few minutes ago, Windows 7 no longer allows hyperlinks in e-mails (Outlook 2003) to connect. Message is "This operations has been cancelled due to restrictions in your computer. Please contact your system administrator."

    I use Windows 7 x64 with Office 2010 and the message I get is General Failure. the URL was:..... An error occured in sending the command to the application.
    This only started happening after the 3.6.14 update.

  • Since upgrading Iphone to iOS 5.1.1 it does not automatically use wifi internet when wifi is available. It has been draining my mobile data. I can only manually change settings with cellular data everytime I get home. Any other solutions?

    Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I  now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a  problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?

    Please disregard this question. I'll submit a shorter and more direct question. Thanks.

Maybe you are looking for